Phase relations of the Li2O-Ta2O5-B2O3 and Li2O-WO3-B2O3 systems and promising nonlinear optical compounds in K2O-Ta2O5-B2O3 system

The subsolidus phase equilibria of the Li₂O-Ta₂O₅-B₂O₃, K₂O-Ta₂O₅-B₂O₃ and Li₂O-WO₃-B₂O₃ systems have been investigated mainly by means of the powder X-ray diffraction method. Two ternary compounds, KTaB₂O₆ and K₃Ta₃B₂O₁₂ were confirmed in the system K₂O-Ta₂O₅-B₂O₃. Crystal structure of compound KTaB₂O₆ has been refined from X-ray powder diffraction data using the Rietveld method. The compound crystallizes in the orthorhombic, space group Pmn2₁ (No. 31), with lattice parameters a = 7.3253(4) Å, b = 3.8402(2) Å, c = 9.3040(5) Å, z = 2 and D_calc = 4.283 g/cm³. The powder second harmonic generation (SHG) coefficients of KTaB₂O₆ and K₃Ta₃B₂O₁₂ were five times and two times as large as that of KH₂PO₄ (KDP), respectively.     

Microwave dielectric properties and microstructures of the 11Li2O-3Nb2O5-12TiO2 ceramics with B2O3 addition

The effects of B₂O₃ addition, as a sintering agent, on the sintering behavior, microstructure and microwave dielectric properties of the 11Li₂O-3Nb₂O₅-12TiO₂ (LNT) ceramics have been investigated. With the low-level doping of B₂O₃ (≤2 wt.%), the sintering temperature of the LNT ceramic could be effectively reduced to 900 °C. The B₂O₃-doped LNT ceramics are also composed of Li₂TiO₃ss and “M-phase” phases. No other phase could be observed in the 0.5-2 wt.% B₂O₃-doped ceramics sintered at 840-920 °C. The addition of B₂O₃ induced no obvious degradation in the microwave dielectric properties but increased the τ_f values. Typically, the 0.5 wt.% B₂O₃-doped ceramics sintered at 900 °C have better microwave dielectric properties of ?_r = 49.2, Q × f = 8839 GHz, τ_f = 57.6 ppm/°C, which suggest that the ceramics could be applied in multilayer microwave devices requiring low sintering temperatures.     

Synthesis and Li ion conductivity of Li2O-Nb2O5-P2O5 glasses and glass-ceramics

Glasses with the compositions of xLi₂O-(70 − x)Nb₂O₅-30P₂O₅, x = 30-60, and their glass-ceramics are synthesized using a conventional melt-quenching method and heat treatments in an electric furnace, and Li⁺ ion conductivities of glasses and glass-ceramics are examined to clarify whether the glasses and glass-ceramics prepared have a potential as Li⁺ conductive electrolytes or not. The electrical conductivity (σ) of the glasses increases monotonously with increasing Li₂O content, and the glass of 60Li₂O-10Nb₂O₅-30P₂O₅ shows the value of σ = 2.35 × 10⁻⁶ S/cm at room temperature and the activation energy (E_a) of 0.48 eV for Li⁺ ion mobility in the temperature range of 25-200 °C. It is found that two kinds of the crystalline phases of Li₃PO₄ and NbPO₅ are formed in the crystallization of the glasses and the crystallization results in the decrease in Li⁺ ion conductivity in all samples, indicating that any high Li⁺ ion conducting crystalline phases have not been formed in the present glasses. 60Li₂O-10Nb₂O₅-30P₂O₅ glass shows a bulk nanocrystallization (Li₃PO₄ nanocrystals with a diameter of ∼70 nm) and the glass-ceramic obtained by a heat treatment at 544 °C for 3 h in air exhibits the values of σ = 1.23 × 10⁻⁷ S/cm at room temperature and E_a = 0.49 eV.     

Structure, thermal and magnetic characterization of hydrothermal synthesized Li2CuP2O7 crystals

New lithium copper(II) pyrophosphate, Li₂CuP₂O₇ crystals were synthesized by the hydrothermal technique at moderate temperature and pressure conditions. The as-synthesized compound was characterized by DTA/TGA, infrared radiation, single crystal XRD and magnetic susceptibility measurement. The compound has crystallized in monoclinic system with C2/c space group and cell parameters a = 15.3360(14) Å, b = 4.8733(13) Å, β = 114.8(1)°, V = 585.2(2) Å, having tunnel type of cavities in the structure. Thermal behaviour and structural coordination of the prepared materials were investigated, respectively, using DTA/TGA and FTIR measurements. Magnetic results have revealed; it is a frequency and temperature dependent prospective paramagnetic materials.     

Structure and lithium ion conductivity of garnet-like Li5La3Sb2O12 and Li6SrLa2Sb2O12

Oxides with the nominal chemical compositions Li₅La₃Sb₂O₁₂ and Li₆SrLa₂Sb₂O₁₂ were prepared by solid-state reaction. The structures were refined by the Rietveld method using powder X-ray diffraction data. The synthesis of Li₅La₃Sb₂O₁₂ resulted in the well known garnet-related structure plus 5 wt.% of La₂LiSbO₆ in the bulk. In contrast to that, Li₆SrLa₂Sb₂O₁₂ could be synthesised in single garnet-related type phase. Lithium ion conductivities of Li₅La₃Sb₂O₁₂ and Li₆SrLa₂Sb₂O₁₂ were studied by the ac impedance method. The grain-boundary contribution to the total (bulk + grain-boundary) resistance is very small and about 5 and 3% for Li₅La₃Sb₂O₁₂ and Li₆SrLa₂Sb₂O₁₂, respectively, at 24 °C and decreases further with increase in temperature. Among the investigated compounds, Li₅La₃Sb₂O₁₂ exhibits the highest total (bulk + grain-boundary) and bulk ionic conductivity of 7.8 × 10⁻⁶ and 8.2 × 10⁻⁶ S cm⁻¹, respectively, at 24 °C. The structural data indicate that the coupled substitution Li + Sr ⇒ La leads to a closure of the bottle neck like O-O distances of the shared edges of neighbouring Li octahedra and therefore reduces the mobility of Li ions in Li₆SrLa₂Sb₂O₁₂. Scanning electron microscope (SEM) images of the Li₆SrLa₂Sb₂O₁₂ compound revealed well crystallised large homogeneous grains (∼4.8 μm) and the grains were in good contact with the neighbouring grain, which leads to a smaller grain-boundary contribution to the total resistance.     

Synthesis and characterisation of the garnet-related Li ion conductor, Li5Nd3Sb2O12

In this paper the synthesis, conductivity, and structure of the garnet-related Li ion conductor, Li₅Nd₃Sb₂O₁₂, are reported. As for the related Li₅La₃M₂O₁₂ (M = Nb, Ta) materials, this phase shows high Li ion conductivity, with a conductivity at 300 °C of 9.2 × 10⁻³ S cm⁻¹. Structural studies using neutron diffraction indicate a cubic unit cell, space group Ia-3d, with Li located in two partially occupied sites. One of the sites is the traditional garnet structure tetrahedral site, while the other Li site is considerably more distorted. Although the latter is nominally a six coordinate site, a close inspection suggests that the coordination could be described as distorted tetrahedral, with the remaining two bonds being significantly longer (≈2.6 Å).     

Large-scale synthesis of Li1.2V3O8 as a cathode material for lithium secondary battery via a soft chemistry route

Layered Li_1.2V₃O₈ has been efficiently prepared via a sol-gel method. XRD and particle size analysis indicate that the final product with monoclinic structure consists of homogeneously distributed particles whose sizes are in a very narrow range. There are two different water molecules in the compound according to TGA and DTA. The structural water works as a pillar in the structure and is lost at higher temperature than the combined water. The as-prepared material was also compared with the one synthesized from the conventional solid-state method in terms of their morphology, electrochemistry capacity and electrodynamic characteristics. As a result, the Li_1.2V₃O₈ obtained at 300 °C for 10 h has excellent electrochemical properties. A high-first discharge capacity of 286.4 mAh/g was observed at a current rate of C/5 between 1.7 and 3.8 V and the structure of Li_1.2V₃O₈ remains stable in the subsequent cycles. EIS calculation suggests a better diffusion path for lithium ions in as-prepared material than in the solid-state compound.     

Effects of Cr2O3 doping on the electrical properties and the temperature stabilities of PNW-PMN-PZT ceramics

The ceramics with 0.90Pb(Zr_0.50Ti_0.50)O₃-0.07Pb(Mn_1/3Nb_2/3)O₃-0.03Pb(Ni_1/2W_1/2)O₃ were prepared by adding Cr₂O₃. The effects of Cr₂O₃ doping on the phase structure, the microstructure and the electrical properties of ceramics were investigated. Meanwhile, the temperature stabilities of the resonant frequency (f_r) and the electromechanical coupling factor (K_p) were studied. The results showed that the better temperature stability could be obtained at x = 0.2 wt.% when the calcining temperature was 800 °C and the sintering temperature was 1150 °C. The parameters were Δf_r/f_r25 °C = −0.17% and ΔK_p/K_p25 °C = −1.39%. Moreover, the optimized electrical properties were also achieved, which were K_P = 0.54, Q_m = 1730, d₃₃ = 330 pC/N, ?_r = 2078 and tan δ = 0.0052. The optimized properties make the ceramics with this composition to be a good candidate for high power piezoelectric transformers applications.     

Crystal growth and structure refinement of monoclinic Li2TiO3

Colorless platelet crystals of monoclinic Li₂TiO₃ with a maximum size of 5.0 mm × 5.0 mm × 0.5 mm were successfully grown by a flux method at 1373 K using a LiBO₂-Li₂O system flux. The stoichiometric chemical composition of Li₂TiO₃ was determined by the SEM-EDX, ICP-AES and density measurement using the single crystal samples. The thermal conductivity of the Li₂TiO₃ single crystals was evaluated using hot-disk method. A single-crystal X-ray diffraction study confirmed the monoclinic Li₂SnO₃-type structure, space group C2/c and the lattice parameters of a = 5.0623(5) Å, b = 8.7876(9) Å, c = 9.7533(15) Å, β = 100.212(11)°, and V = 427.01(9) Å³. The crystal structure was refined to the conventional values of R = 2.4% and wR=3.3% for 2187 independent observed reflections. The cationic arrangement of (LiTi₂) layers in Li₂TiO₃ was precisely revealed by the structure analysis.     

Preparation and mobile ion transport studies of Ta and Nb doped Li6Zr2O7 Li-fast ion conductors

Pure and doped Li_6−x(Zr_2−xM_x)O₇, M = Nb and Ta; x = 0, 0.15 compounds have been prepared by the urea combustion method followed by annealing at 950 °C for 8 h. The samples are characterized by X-ray diffraction and impedance spectroscopy. Ionic conductivities, σ_ionic, were determined in the temperature range of 60-360 °C by impedance spectroscopy. We observe that the Ta doped Li₆Zr₂O₇ has a measurable σ_ionic at ∼160 °C, and at 300 °C exhibits a conductivity value of 1 × 10⁻³ S/cm. The temperature dependence of the conductivity in the range 100-360 °C obeys an Arrhenius relation, yielding an activation energy of E_a = 0.95 eV (for M = Ta and x = 0.15).The bond valence approach has been used to visualise Li⁺ ion migration pathways and the conductivity mechanism in these compounds. The lowest energy pathway is found to extend along the [0 1 2] direction. The Bond valence analysis also indicates a significantly anisotropic Li-ion conductivity in compounds with Li₆Zr₂O₇ type structure, predicting activation energies of 1.1 and 0.9 eV for the low energy pathway in undoped and doped Li₆Zr₂O₇.     

Synthesis and crystal structure of a novel lithium bismuth phosphate, Li2Bi14.67(PO4)6O14

A lithium bismuth phosphate, Li₂Bi_14.67(PO₄)₆O₁₄, has been synthesized for the first time by the solid-state method. The crystal structure was determined by single crystal X-ray diffraction at 150 K. Li₂Bi_14.67(PO₄)₆O₁₄ crystallizes in the monoclinic system C2/c (No. 15), with a = 30.8189(4) Å, b = 5.2691(3) Å, c = 24.5302(3) Å, β = 122.84(2)°, V = 3346.81(1) Å³ and Z = 2. The structure along the b axis consists of layers of [Bi₂O₂] units as the basic building block. These are separated by isolated PO₄ and LiO₄ tetrahedra. The oxygen co-ordination around two of the phosphorus atoms is disordered. Solid-state ⁷Li NMR studies confirm the presence of lithium in the structure. The material shows ionic conductivity of the order of 10⁻⁵ S cm⁻¹ at 600 °C.     

Hygroscopicity and bulk thermal expansion in Y2W3O12

Negative thermal expansion material, Y₂W₃O₁₂ has been synthesized by the solid-state method and bulk thermal expansion of the material has been investigated from 300 to 1100 K. The material reversibly forms a trihydrate composition whose X-ray diffraction pattern can be indexed to an orthorhombic unit cell with a = 10.098(1) Å, b = 13.315(3) Å, c = 9.691(4) Å. The cell volume of the hydrated pattern is 7% smaller than the unhydrated cell volume. According to the dilatometric studies, the material shows a 3-6% increase in the linear strain at about 400 K, which can be attributed to the removal of water. Sintering the material at 1473 K leads to large grain size of >100 μm, which results in a large hysteresis in the bulk thermal expansion behavior. Hot pressing at 1273 K under a uniaxial pressure of 25 MPa results in a fine-grained (2-5 μm) ceramic. Glazing the ceramic prevents moisture pick up and a linear thermal expansion over the entire temperature range 1100-300 K and an average linear thermal expansion co-efficient of −9.65 × 10⁻⁶/K is observed. The effect of water on the thermal expansion behavior of this system is discussed.     

Phase relations in the BaO-B2O3-TiO2 system and the crystal structure of BaTi(BO3)2

In this paper, the subsolidus phase relations in the ternary system BaO-B₂O₃-TiO₂ have been investigated. The phase diagram consists of 15 ternary phase regions. There exist 11 binary compounds and two ternary compounds. The ternary compound, BaTi(BO₃)₂, is isostructural with CaMg(CO₃)₂. It crystallizes in a rhombohedral system with the space group R-3. The lattice parameters are a=5.0205(2) and c=16.3844(1) Å. Final refinement on the diffraction data converge to R_p=9.09, R_wp=12.24, and R_exp=3.75%.     

Preparation, X-ray analysis and magnetic investigation of nanostructured Co:Yb2O3

Cubic nanocrystalline Co:Yb₂O₃ in the size range of 8-38 nm were synthesized by sol-gel method. Annealing temperature should be higher then 600 °C. The morphology and the particle size were controlled using the electronic microscopy (SEM). Magnetic susceptibility measurements of all samples were done in a temperature range 2-50 K. In this region only the lowest Kramer's doublet is populated, and for that level the effective magnetic quantum number is deduced. The Curie-Weiss paramagnetic temperature θ(x) obtained for the low-temperature region depend linearly on the Co³⁺ concentration. Above 30 K the inverse magnetic susceptibility deviates from linearity due to the crystal field influence.     

Low-temperature firing and microwave dielectric properties of ZnO-Nb2O5-TiO2-SnO2 ceramics with CuO-V2O5

The effects of CuO-V₂O₅ addition on the sintering temperature and microwave dielectric properties of ZnO-Nb₂O₅-TiO₂-SnO₂ were investigated. The CuO-V₂O₅ addition lowered the sintering temperature of ZnO-Nb₂O₅-TiO₂-SnO₂ ceramics effectively from 1150 to 860 °C due to the liquid-phase effect of Cu₂V₂O₇ and Cu₃(VO₄)₂, as observed by XRD. The microwave dielectric properties were found to strongly correlate with the sintering temperature and the amount of CuO-V₂O₅ addition. The maximum Qf values decreased with increasing CuO-V₂O₅ content, due to the formation of the second phase, Cu₃(VO₄)₂ and CuNbO₃. Zero τ_f value can be obtained by properly adjusting the sintering temperature. At 860 °C, ZnO-Nb₂O₅-TiO₂-SnO₂ ceramics with 1.5 wt.% CuO-V₂O₅ gave excellent microwave dielectric properties: ?_r = 42.3, Qf = 9000 GHz and τ_f = 8 ppm/°C.     

Elastic properties and spectroscopic studies of fast ion conducting Li2OZnOB2O3 glass system

Glass systems of the composition xLi₂O-20ZnO-(80 − x)B₂O₃ where (x = 5, 10, 15, 20, 25 and 30 mol%) have been prepared by melt quenching technique. Elastic properties, ¹¹B MAS-NMR and IR spectroscopic studies have been employed to study the structure of Li₂O-ZnO-B₂O₃ glasses. Elastic properties have been investigated using sound velocity measurements at 10 MHz. Elastic moduli reveal trends in their compositional dependence. The bulk modulus and shear modulus increases monotonically with increase of BO₄ units, which increase the dimensionality of the network. ¹¹B MAS-NMR and IR spectra show characteristic features of borate network and compositional dependent trends as a function of Li₂O/ZnO concentration. The results are discussed in view of borate network and the dual structural role of Zn²⁺ ions. The results indicate that the Zn²⁺ are likely to occupy network-forming positions in this glass system.     

Fluorite-like phases in the BaF2-BiF3-Bi2O3 system—synthesis, conductivity and defect clustering

A fluorite-like solid solution Ba_1 − xBi_xO_zF_{2 + x − 2z} on the basis of cubic BaF₂ was synthesised in the BaF₂-Bi₂O₃-BiF₃ system and the homogeneity range at 873 K was determined. The samples were studied by X-ray powder diffraction and electron diffraction, and their transport properties were measured by the complex impedance method at 300-623 K. Tendencies of variation of lattice parameters and transport properties were determined. These tendencies are discussed on the basis of a defect clustering hypothesis. Thermal treatment at 573 K of the solid solution, quenched from 873 K results in the formation of a new ordered tetragonal fluorite-like phase with lattice parameters a = 9.5355(4) Å, c = 18.151(1) Å.     

Characterization of ZnO-In2O3 transparent conducting films by pulsed laser deposition

Transparent conducting oxide (TCO) films in the ZnO-In₂O₃ system were prepared by a pulsed laser deposition method. A target that consists of the mixture of ZnO and In₂O₃ powders was used. Influences of the target composition x (x = [Zn]/([Zn] + [In])) and heater temperature on structural, electrical and optical properties of the TCO films were examined. Introduction of oxygen gas into the chamber during the deposition was necessary for improvement in the transparency of the deposited films. The amorphous phase was observed for a wide range of x = 0.20-0.60 at 110 °C. Minimum resistivity was 2.65 × 10⁻⁴ Ω cm at x = 0.20. The films that showed the minimum resistivity had an amorphous structure and the composition shifted toward larger x, as the substrate temperature increased. The films were enriched in indium compared to the target composition and the cationic In/Zn ratio increased as the substrate temperature was increased.     

Synthesis and microwave dielectric properties of CaO-MgO-SiO2 submicron powders doped with Li2O-Bi2O3 by sol-gel method

Using Ca(NO₃)₂·4H₂O, Mg(NO₃)₂·6H₂O, Si(OC₂H₅)₄, LiNO₃ and Bi(NO₃)₃·5H₂O as raw materials, CaO-MgO-SiO₂ submicron powders were prepared at low temperature by sol-gel method. The crystallization temperature was decreased enormously by the introduction of Li-Bi liquid phase sintering aids into Ca-Mg-Si sol, and the powders with average particle sizes of 80-100 nm and 200-400 nm were obtained at the calcining temperature of 750 °C and 800 °C, respectively. The sintering characteristic and dielectric properties of powders calcined at 750 °C with different content of powders calcined at 800 °C were studied. When the content of powders calcined at 800 °C was 10 wt%, the dielectric ceramic sintered at 890 °C had compact structure, and possessed excellent microwave dielectric properties: ?_r = 7.16, Q × f = 25630 GHz, τ_f = −69.26 ppm/°C.     

Crystal structure and ionic conductivity of ruthenium diphosphate ARu2(P2O7)2, A=Li, Na, and Ag, with a tunnel structure

Crystal structure and ionic conductivity of ruthenium diphosphates, ARu₂(P₂O₇)₂ A=Li, Na, and Ag, were investigated. The structure of the Ag compound was determined by single crystal X-ray diffraction techniques. It crystallized in the triclinic space group P−1 with a=4.759(2) Å, b=6.843(2) Å, c=8.063(1) Å, α=90.44(2)°, β=92.80(2)°, γ=104.88(2)°, V=253.4(1) Å³. The host structure of it was composed of RuO₆ and P₂O₇ groups and formed tunnels running along the a-axis, in which Ag⁺ ions were situated. The ionic conductivities have been measured on pellets of the polycrystalline powders. The Li and Ag compounds showed the conductivities of 1.0×10⁻⁴ and 3.5×10⁻⁵ S cm⁻¹ at 150 °C, respectively. Magnetic susceptibility measurement of the Ag compound showed that it did not obey the Curie-Weiss law and the effective magnetic moment decreased as temperature decreased due to the large spin-orbital coupling effect of Ru⁴⁺ ions.