Synthesis of ZnO flowers and their photoluminescence properties

Flower-like ZnO nano/microstructures have been synthesized by thermal treatment of Zn(NH₃)₄²⁺ precursor in aqueous solvent, using ammonia as the structure directing agent. A number of techniques, including X-ray diffraction (XRD), field emission scan electron microscopy (FESEM), transmission electron microscopy (TEM), thermal analysis, and photoluminescence (PL) were used to characterize the obtained ZnO structures. The photoluminescence (PL) measurements indicated that the as-synthesized ZnO structures showed UV (∼375 nm), blue (∼465 nm), and yellow (∼585 nm) emission bands when they were excited by a He-Gd laser using 320 nm as the excitation source. Furthermore, it has been interestingly found that the intensity of light emission at ∼585 nm remarkably decreased when the obtained ZnO nanocrystals were annealed at 600 °C for 3 h in air. The reason might be the possible oxygen vacancies and interstitials in the sample decreased at high temperature.     

Low temperature pH dependent synthesis of flower-like ZnO nanostructures with enhanced photocatalytic activity

In the present study we have synthesized flower-like ZnO nanostructures comprising of nanobelts of 20 nm width by template and surfactant free low-temperature (4 °C) aqueous solution route. The ZnO nanostructures exhibit flower-like morphology, having crystalline hexagonal wurtzite structure with (0 0 1) orientation. The flowers with size between 600 and 700 nm consist of ZnO units having crystallite size of ∼40 nm. Chemical and structural characterization reveals a significant role of precursor:ligand molar ratio, pH, and temperature in the formation of single-step flower-like ZnO at low temperature. Plausible growth mechanism for the formation of flower-like structure has been discussed in detail. Photoluminescence studies confirm formation of ZnO with the defects in crystal structure. The flower-like ZnO nanostructures exhibit enhanced photochemical degradation of methylene blue (MB) with the increased concentration of ligand, indicating attribution of structural features in the photocatalytic properties.     

Microscale sphere assembly of ZnO nanotubes

In this paper, we report a facile method to perform microsphere organization of ZnO nanotubes. Study shows ZnO nanotubes with diameters of 80-150 nm and lengths of 1.2-2 μm were assembled into 3-4.5 μm microsphere superstructures, the significance of these assembled ZnO nanotubes is that one-dimensional anisotropic ZnO building blocks are selectively aligned into highly symmetrical three-dimensional isotropic conformations, which may promise us new types of ZnO applications. These microsphere assemblies of ZnO nanotubes have a wide visible yellow emission at 600 cm⁻¹. The assembly mechanism was also proposed, the addition of metallic zinc species into linear poly ethylene glycol (PEG) containing ethanol and water mixed solution led to aggregation of PEG polymer coils to Zn(II)/PEG globules with a diameter of ∼500 nm, the globule turned into tube-like-structured ZnO-PEG microsphere assemblies (∼2 μm) after ultrasonic pretreatment, ZnO nanotubes were formed by the oriented attachment and Ostwald ripening of ZnO growth units onto the tube-like structures during the following hydrothermal process.     

Structure and luminescence of (Zn,Mg)O:Zn nanophosphor films

A versatile homogeneous solution growth method is developed for depositing (Zn,Mg)O:Zn²⁺ nanophosphor films from aqueous solutions of zinc, magnesium and triethanolamine. The effect of pH on the structural and morphology of (Zn,Mg)O:Zn²⁺ nanophosphor films was studied and the optimum deposition conditions have been outlined. The deposition rate of nanophosphor film at neutral pH condition was comparatively larger than in basic conditions. The as-deposited films exhibit good crystallinity with hexagonal wurtzite crystalline structure and preferably oriented along (0 0 2) plane. With time, the nanophosphor films appeared dense on the glass substrate comprising of particle sizes of 30-50 nm. Upon excitation at 326 nm, photoluminescence (PL) spectrum corresponding to deep level impurities (∼ 410-530 nm) was completely masked by the strong blue-green emission at ∼ 456 nm. The ratio of Mg to Zn was optimized for maximum PL brightness whereas the optical transmittance of the nanophosphor film decreased with increasing thickness.     

Structural properties and growth mechanism of flower-like ZnO structures obtained by simple solution method

Flower-shaped zinc oxide (ZnO) structures have been synthesized in the reaction of aqueous solution of zinc nitrate and NaOH at 90 °C. To examine the morphology of ZnO nanostructures, time-dependent experiments were carried out. Detailed structural observation showed that the flower-like structures consist of triangular-shaped leaves, having sharpened tips with wider bases. Photoluminescence spectrum measured at room temperature show a sharp UV emission at 381 nm and a strong and broad green emission at 480-750 nm attributed to structural defects. A possible growth mechanism for the formation of flower-shaped ZnO structures is discussed in detail.     

Solution precursor plasma deposition of nanostructured ZnO coatings

Zinc oxide (ZnO) is a wide band gap semiconducting material that has various applications including optical, electronic, biomedical and corrosion protection. It is usually synthesized via processing routes, such as vapor deposition techniques, sol-gel, spray pyrolysis and thermal spray of pre-synthesized ZnO powders. Cheaper and faster synthesis techniques are of technological importance due to increased demand in alternative energy applications. Here, we report synthesis of nanostructured ZnO coatings directly from a solution precursor in a single step using plasma spray technique. Nanostructured ZnO coatings were deposited from the solution precursor prepared using zinc acetate and water/isopropanol. An axial liquid atomizer was employed in a DC plasma spray torch to create fine droplets of precursor for faster thermal treatment in the plasma plume to form ZnO. Microstructures of coatings revealed ultrafine particulate agglomerates. X-ray diffraction confirmed polycrystalline nature and hexagonal Wurtzite crystal structure of the coatings. Transmission electron microscopy studies showed fine grains in the range of 10-40 nm. Observed optical transmittance (∼65-80%) and reflectivity (∼65-70%) in the visible spectrum, and electrical resistivity (48.5-50.1 mΩ cm) of ZnO coatings are attributed to ultrafine particulate morphology of the coatings.     

Room temperature electroluminescence from the n-ZnO/p-GaN heterojunction device grown by MOCVD

The heterojunction light-emitting diode with n-ZnO/p-GaN structure was grown on (0 0 0 1) sapphire substrate by metalorganic chemical vapor deposition (MOCVD) technique. The heterojunction structure was consisted of an Mg-doped p-type GaN layer with a hole concentration of ∼10¹⁷ cm⁻³ and a unintentionally doped n-type ZnO layer with an electron concentration of ∼10¹⁸ cm⁻³. A distinct blue-violet electroluminescence with a dominant emission peak centered at ∼415 nm was observed at room temperature from the heterojunction structure under forward bias conditions. The origins of the electroluminescence (EL) emissions are discussed in comparison with the photoluminescence spectra, and it was supposed to be attributed to a radiative recombination in both n-ZnO and p-GaN sides.     

Effect of boron doping on optical properties of sol-gel based nanostructured zinc oxide films on glass

Boron doped zinc oxide thin films (∼80 nm) were deposited onto pure silica glass by sol-gel dip coating technique from the precursor sol/solution of 4.0 wt.% equivalent oxide content. The boron concentration was varied from 0 to 2 at.% w.r.t. Zn using crystalline boric acid. The nanostructured feature of the films was visualized by FESEM images and the largest cluster size of ZnO was found in 1 at.% boron doped film (B1ZO). The presence of mixed crystal phases with hexagonal as major phase was identified from XRD reflections of the films. Particle size, optical band gap, visible specular reflection, room temperature photoluminescence (PL) emissions (3.24-2.28 eV), infra-red (IR) and Raman active longitudinal optical (LO) phonon vibration were found to be dependent on dopant concentration. For the first time, we report the room temperature fine structured PL emissions as phonon replicas originated from the LO phonon (both IR and Raman active) in 1 at.% boron doped zinc oxide film.     

A template-free alcoholthermal route to Ti(Sn)-doped ZnO nanorods

Ti(Sn)-doped single-crystalline ZnO nanorods with an average diameter of 20 nm and length up to nearly 1 μm were synthesized by a facile ultrasonic irradiation-assisted alcoholthermal method without involving any templates. Photoluminescence spectra of the Ti-doped ZnO nanorods were measured at room temperature and three emitting bands, being a violet emission at 400-415 nm, a blue band at 450-470 nm and a green band at around 550 nm, were detected. The emission intensities of the Ti-doped ZnO nanorods enhance gradually with increasing the doping concentrations. As to the Sn-doped ZnO nanorods, the green emission shifts to 540 nm and the emission intensities increase first but decrease later with increasing the doping concentrations.     

Seed layer-free electrodeposition of well-aligned ZnO submicron rod arrays via a simple aqueous electrolyte

A potentiostatic electrodeposition technique was used to directly fabricate large-scale, well-aligned, and single-crystalline submicron ZnO rod arrays on tin doped indium oxide glass substrate without a pre-prepared seed layer of ZnO from an aqueous solution only containing zinc nitrate. The effects of electrochemical parameters, such as electrodeposition potential, electrodeposition duration, solution temperature, and precursor concentration, on the orientation, morphology, aspect ratio, and growth rate of ZnO rod arrays were systematically investigated. Results show that submicron ZnO rod arrays with (0 0 0 2) preferred orientation and perfect crystallization were obtained when electrodeposition potential was in the range from −0.6 to −1.1 V and solution temperature was controlled above 60 °C. Both high solution temperature and low precursor concentration resulted in the decrease in rod diameters. Photoluminescence measures showed that small diameter and nanotips of ZnO rod arrays should be responsible for strong and sharp ultraviolet emission in the room temperature photoluminescence spectra.     

Effect of precursor on epitaxially grown of ZnO thin film on p-GaN/sapphire (0 0 0 1) substrate by hydrothermal technique

Single crystalline ZnO thin film on p-GaN/sapphire (0 0 0 1) substrate, using two different precursors by hydrothermal route at a temperature of 90 °C were successfully grown. The effect of starting precursor on crystalline nature, surface morphology and optical emission of the films were studied. ZnO thin films were grown in aqueous solution of zinc acetate and zinc nitrate. X-ray diffraction analysis revealed that all the thin films were single crystalline in nature and exhibited wurtzite symmetry and c-axis orientation. The thin films obtained with zinc nitrate had a more pitted rough surface morphology compared to the film grown in zinc acetate. However the thickness of the films remained unaffected by the nature of the starting precursor. Sharp luminescence peaks were observed from the thin films almost at identical energies but deep level emission was slightly prominent for the thin film grown in zinc nitrate.     

Dendrigraft polymer-based synthesis of silver nanoparticles showing bright blue fluorescence

A novel method is reported here for the synthesis of optically clear and stable colloidal solutions of silver nanoparticles. According to size they show different colours depending upon their plasmonic absorption frequencies. The materials have been synthesized at room temperature by chemical reduction of silver ions (silver nitrate) coordinated with dendrigraft polymer, polyethyleneimine (PEI) using formaldehyde in aqueous medium. UV-vis absorption and transmission electron microscopy (TEM) studies show single-band absorption with peak maximum at 354 nm for ∼3 nm sized particles, whereas a side band at ∼400 nm was observed when the particle size increased to ∼20 nm. Highly narrow particle size distribution was observed in case of samples having ∼3 nm size silver particles and also the process of reduction could be completed within minutes. More interestingly, the 3-nm sized particles showed strong blue (474 nm) fluorescence under UV excitation. Thin films of all synthesized samples were prepared on silica substrate by fine spray coating technique.     

Cathodoluminescence and its mapping of flower-like ZnO, ZnO/ZnS core-shell and tube-like ZnS nanostructures

The cathodoluminescence (CL) properties including intensity and distribution of the band to band and defect emission of the flower-like ZnO, ZnO/ZnS core-shell and tube-like ZnS nanostructures have been investigated. It is indicated that the Ultraviolet (UV) emission at 380 nm of the flower-like ZnO nanostructures due to the band to band emission is weaker than their yellow emission at 600 nm induced by interstitial oxygen. Moreover, the UV emission of the ZnO nanorods unevenly distributes from the tip to the end. The UV emission on the tip is stronger than that of others due to the waveguide. On the contrary, the yellow emission at 600 nm is uniform. Furthermore, the UV emission of ZnO has been greatly enhanced and the yellow emission has been inhibited by the formation of ZnO/ZnS core-shell nanostructures in the sulfuration process due to the elimination of interstitial oxygen. However, the polycrystalline tube-like ZnS nanostructures shows the uniform and weak defect emission due to S vacancies.     

Synthesis of PbS/poly (vinyl-pyrrolidone) nanocomposite

A simple solution growth method for synthesis of nanocomposite of PbS nanoparticles in poly(vinyl-pyrrolidone) (PVP) polymer is described. The nanocomposite is prepared from methanolic solution of lead acetate (PbAc), thiourea (TU) and PVP at room temperature (∼27 °C). Optical absorption spectrum of PbS/PVP nanocomposite solution shows strong absorption from 300 to 650 nm with significant bands at 400 and 590 nm which is characteristic of nanoscale PbS. Spin-coated nanocomposite films on glass have an absorption edge at ∼650 nm with band gap of 2.55 eV. Fourier transform infrared (FTIR) spectroscopy of PbS/PVP nanocomposite and PVP shows strong chemical bond between PbS nanoparticles and host PVP polymer. The transmission electron microscope (TEM) images reveal that 5-10 nm PbS particles are evenly embedded in PVP polymer. The formation of PbS is confirmed by selective area electron diffraction (SAED) of a typical nanoparticle.     

Fabrication of lithium-doped zinc oxide film by anodic oxidation and its ferroelectric behavior

A lithium-doped zinc oxide (ZnO) film was obtained by the anodic oxidation of a zinc sheet in a lithium hydroxide (LiOH) solution under an external DC voltage. The formation of the ZnO film on the surface of the Zn sheet is attributed to two simultaneous processes: the electrochemical oxidation of Zn to ZnO, and the chemical dissolution of ZnO. It was also confirmed that Li element was successfully introduced into the lattice of the ZnO film. The curves of the polarization versus applied field were measured to be hysteresis loops, suggesting ferroelectricity of the Li-doped ZnO film. The remanent polarization and the coercive field of the film were measured to be 4.7 × 10⁻³ C m⁻² and 1.2 × 10⁷ V m⁻¹, respectively. This ferroelectricity is believed to be the result of the occupation of off-centered positions in oxygen tetrahedra by the Li⁺ ions.     

Synthesis, characterization and optical properties of sheet-like ZnO

Sheet-like ZnO with regular hexagon shape and uniform diameter has been successfully synthesized through a two-step method without any metal catalyst. First, the sheet-like ZnO precursor was synthesized in a weak alkaline carbamide environment with stirring in a constant temperature water-bath by the homogeneous precipitation method, then sheet-like ZnO was obtained by calcining at 600 °C for 2 h. The structures and optical properties of sheet-like ZnO have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and UV-vis-NIR spectrophotometer. The results reveal that the product is highly crystalline with hexagonal wurtzite phase and has appearance of hexagon at (0 0 0 1) plane. The HRTEM images confirm that the individual sheet-like ZnO is single crystal. The PL spectrum exhibits a narrow ultraviolet emission at 397 nm and a broad visible emission centering at 502 nm. The band gap of sheet-like ZnO is about 3.15 eV.     

Effect of thickness on the structural, electrical and optical properties of ZnO films

A series of ZnO films of different thickness have been deposited on glass substrates using sol-gel technique by varying the number of spin coatings and the effect of film thickness on the structural, electrical and optical properties have been investigated. The XRD results indicate that the full width at half maximum (FWHM) of the (0 0 2) diffraction peak and the strain along c-axis are decreased as the film is grown up to a thickness of 300 nm. Above 300 nm, the strain again becomes appreciable. The surface morphology shows that the grains become more uniform and bigger in size as the film thickness increases. Electrical result shows that although ZnO film with thickness of around 260 nm has the highest resistivity but is better for current conduction. The excitonic nature in the absorption spectrum becomes prominent for a film with thickness of around 260 nm. The band gap increases and then decreases as the film grows thicker.     

Large-area SnO2: F thin films by offline APCVD

In this paper, we reported the successful preparation of fluorine-doped tin oxide (FTO) thin films on large-area glass substrates (1245 mm × 635 mm × 3 mm) by self-designed offline atmospheric pressure chemical vapor deposition (APCVD) process. The FTO thin films were achieved through a combinatorial chemistry approach using tin tetrachloride, water and oxygen as precursors and Freon (F-152, C2H4F2) as dopant. The deposited films were characterized for crystallinity, morphology (roughness) and sheet resistance to aid optimization of materials suitable for solar cells. We got the FTO thin films with sheet resistance 8-11 Ω/□ and direct transmittance more than 83%. X-ray diffraction (XRD) characterization suggested that the as-prepared FTO films were composed of multicrystal, with the average crystal size 200-300 nm and good crystallinity. Further more, the field emission scanning electron microscope (FESEM) images showed that the films were produced with good surface morphology (haze). Selected samples were used for manufacturing tandem amorphous silicon (a-Si:H) thin film solar cells and modules by plasma enhanced chemical vapor deposition (PECVD). Compared with commercially available FTO thin films coated by online chemical vapor deposition, our FTO coatings show excellent performance resulting in a high quantum efficiency yield for a-Si:H solar cells and ideal open voltage and short circuit current for a-Si:H solar modules.     

Fabrication of TiO2 nanotube film by well-aligned ZnO nanorod array film and sol-gel process

High density TiO₂ nanotube film with hexagonal shape and narrow size distribution was fabricated by templating ZnO nanorod array film and sol-gel process. Well-aligned ZnO nanorod array films obtained by aqueous solution method were used as template to synthesize ZnO/TiO₂ core-shell structure through sol-gel process. Subsequently, TiO₂ nanotube array films survived by removing the ZnO nanorod cores using wet-chemical etching. Polycrystalline anatase TiO₂ nanotube films were ∼ 1.5 μm long and ∼ 100 nm in inter diameter with a wall thickness of ∼ 10 nm.     

A comparative study on the NO2 gas sensing properties of ZnO thin films, nanowires and nanorods

ZnO thin films were fabricated using the spin coating method, ZnO nanowires by cathodically induced sol-gel deposition by the means of an anodic aluminum oxide (AAO) template, and ZnO nanorods with the hydrothermal technique. For thin film preparation, a clear, homogeneous and stable ZnO solution was prepared by the sol-gel method using zinc acetate (ZnAc) precursor which was then coated on a glass substrate with a spin coater. Vertically aligned ZnO nanowires which were approximately 65 nm in diameter and 10 μm in length were grown in an AAO template by applying a cathodic voltage in aqueous zinc nitrate solution at room temperature. For fabrication of the ZnO nanorods, the sol-gel ZnO solution was coated on glass substrate by spin coating as a seed layer. Then ZnO nanorods were grown in zinc nitrate and hexamthylenetetramine aqueous solution. The ZnO nanorods are approximately 30 nm in diameter and 500 nm in length. The ZnO thin film, ZnO nanowires and nanorods were characterized by X-ray diffraction (XRD) analysis and scanning electron microscope (SEM). The NO₂ gas sensing properties of ZnO thin films, nanowires and nanorods were investigated in a dark chamber at 200 °C in the concentration range of 100 ppb-10 ppm. It was found that the response times of both ZnO thin films and ZnO nanorods were approximately 30 s, and the sensor response was depended on shape and size of ZnO nanostructures and electrode configurations.