Influence of the substitution of Sm, Gd, and Dy for La in La0.7Sr0.3MnO3 on its magnetic and electric properties and strengthening effect on room-temperature CMR

A series of La0.7-xSmxSr0.3MnO3, La0.7-xGdxSr0.3MnO3, and La0.7-xDyxSr0.3MnO3 (x=0.00, 0.10, 0.20, 0.30) samples were prepared by the solid-state reaction method. The influence of the substitution of Sm, Gd, and Dy for La on the magnetic and electric properties and on the magnetoresistance (MR) was studied through measurements of M-T curves and p-T curves. The results showed that: lattice distortion in-duced by substitution of Sm, Gd, and Dy for La and extra magnetism of substitution had great influence on the magnetic and electric proper-ties of perovskite manganites; substitution of magnetic rare earth element for La was an effective way to change Curie temperature and to strengthen MR in perovskite manganites; and appropriate substitution proportion would generate large MR near room temperature.     

Magnetic and electric characteristics and abnormality of low-temperature resistivity in La0.67-xErxSr0.33MnO3(0.00≤x≤0.20) system

M-T curves, p-T curves, and MR-T curves of La0.67-xErxSr0.33MnO3 (x=0.00, 0.10, 0.20) system were studied by experiments. The experiments showed that: with increasing the doping amount, the magnetic structure of the system transformed from long-range ferromag-netic ordering to spin-cluster glass state, and M-T curves bent up in the extremely low temperature range; the resistivity of the system in-creased with increasing doping amount and exhibited the minimum phenomenon of low-temperature resistivity. The variation of the mag-netic and electric properties came from the extra magnetic coupling induced by the doping and from the Kondo effect induced by the lattice distortion and local magnetic moments which was similar to that induced by the mattering of magnetic impurities on electron spins.     

Conductivity and electric properties of La1-xSrxMnO3-δ nanopowders

La_0.8Sr_0.2MnO_3−δ was synthesized by the Pechini's method. The XRD pattern and TEM indicate the formation of the perovskite without the presence of secondary phases. It was found that La_0.8Sr_0.2MnO_3−δ sample prepared at 1000 °C in air atmospheres, contains about 13.11% of the manganese as Mn⁴⁺ and 86.89% of the manganese as Mn³⁺. The electric measurements were carried out for La_0.8Sr_0.2MnO_3–δ nanoceramics by using impedance spectroscopy methods and found to be 0.1 S/cm at 250 °C similar to the typical value of La_0.8Sr_0.2MnO_3-δ materials. Its dependence on reciprocal temperature shows quite complicated mechanism of conduction.     

Electrical Transport and Giant Magnetoresistance in （ 1 - x ） La0.67 Ca0.33 MnO3/x CuO Composites

Samples with nominal composition of （1 - x）La0.67Ca0.33MnO3 （LCMO）/xCuO （x = 0%, 2%, 4% and 20% ） were made using a special experimental method. The temperature dependence of the resistivity （ρ） of the composites was investigated in the temperature range of 10 - 300 K and different magnetic fields of H = 0, 0.1, 0.3, 0.5, 1.0 and 3.0 T. The results showed that CuO percentage x had important effects on metal-insulator transition temperature （Tp）, zero field peak resistivity （ρmax）, and magnetoresistance （MR） properties of the composites. Tp shifted sharply towards low temperature with the increase of x in the range of x ≤4%, but was almost independent of x at high level of CuO content. Composites with x = 4 % and 20 % exhibited similar electrical transmission behavior. Compared with pure LCMO, enhanced magnetoresistance could be clearly observed even in a quite low magnetic field of 0.3 T. For x =4% and 20% samples, the MR value at 0.3 T could reach as high as - 88% and - 90%, respectively. XRD and SEM analysis showed that the substantial enhancement of MR, especially near Tp, was because of local spin disorder between contiguous LCMO ferromagnetic particles caused by the addition of CuO.     

Wastewater treatment using Fe-doped perovskite manganites by photocatalytic degradation of methyl orange,crystal violet and indigo carmine dyes in tungsten bulb/sunlight

We documented(ⅰ) the decolorization of wastewater in visible light,which contains methyl orange,crystal violet and indigo carmine dyes,using La_0.7Sr_0.3Mn_1-xFe_xO₃(x=0.0,0.05,0.1 and 0.5) manganites and(ⅱ) efficient separation of photocatalysts from water using magnetic field.These ceramic photocatalysts were sintered at 1050℃ for 12 h.Ceramics were characterized by X-ray diffraction(XRD),soft X-ray absorption spectroscopy(SXAS),Fourier transf...     

Transport Property of La0.67-xSmxSr0.33MnO3 at Heavy Samarium Doping （0.40≤x≤0.60）

The influence of heavy samarion （Sm） doping （0.40≤x≤0.60） on magnetic and electric properties of La0.67-xSmxSr0.33MnO3 was investigated by measuring the magnetization-temperature （M - T） curves, magnetization-magnetic density （ M - H） curves, resistivity-temperature （ρ- T） curves and magnetoresistivity-temperature （ MR - T） curves of the samples under different temperatures. It is found that, form from long-range ferromagnetic order to spin-cluster glass with the increase of Sm doping amount, the samples transstate and anti-ferromagnetic state; and when x = 0.60, the transport property becomes abnormal under magnetic background; and the magnetic structure changes and extra magnetic coupling induced by doping leads to colossal magnetoresistance effect. The transport mechanism of metallic conduction at low temperature is mainly electron-magneton interaction and can be fitted by the formula ρ = ρ0 ＋ AT^4.5, and the insulatorlike transport mechanism on high temperature range is mainly the function of variable-range hopping and can be fitted by the formula ρ = ρ0exp（T0/T）^1/4. In the formulas above, p is resistivity, T is temperature, and A, ρ0, T0 are constants.     

Effect of doped strontium on catalytic properties of La1‒xSrxMnO3 for rhodamine B degradation

A series of La_1‒xSr_xMnO₃ samples were prepared by sol–gel method and used to degrade rhodamine B (RhB) in water. All samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N₂ adsorption–desorption, temperature-programmed reduction of H₂ (H₂-TPR) and temperature-programmed desorption of O₂ (O₂-TPD). The results show that the degradation of RhB is highly dependent on the initial pH value of solution. Sr doping enhances the degradation ability of LaMnO₃ for RhB in the time range of 0–40 min under a strong acidic environment, but all samples exhibit similar degradation rate from 40 to 60 min. In La_0.7Sr_0.3MnO₃–RhB reaction system, there are two different degradation pathways, including N-de-ethylation, chromophore cleavage, ring-opening and mineralization. La_1‒xSr_xMnO₃ (x ≤ 0.3) has the perovskite structure of La–Mn oxides, while La_0.6Sr_0.4MnO₃ exhibits a Sr_0.4MnLa_0.6O_2.98 perovskite phase. Sr doping leads to distortion of rhombohedral crystal structure and increases the relative content of Mn⁴⁺. The perovskite structure is stable in strong acidic environment during RhB degradation, but the relative content of Mn⁴⁺ and Mn³⁺ on the material surface changes. Sr doped LaMnO₃ achieves specific surface area of 58.8 m²/g and total pore volume of 0.152 cm³/g. Furthermore, Sr²⁺ doping improves redox properties of La–Mn oxides, and the presence of defects makes oxygen diffusion easier compared with the undoped samples.     

Magnetic properties, magnetoresistivity and magnetocaloric effect in GdxLa1-x.MnSi alloys

The results of magnetization, magnetoresistivity and magnetocaloric effect (MCE) studies performed on polycrystalline samples of the Gd_xLa_1−xMnSi (x=0.5, 0.6, 0.7, 0.8, 0.9, 1.0) compounds were presented. Complex measurements were carried out on the Gd_xLa_1−xMnSi compounds to determine the influence of substitution in the rare earth (R) sublattice on the magnetic and related properties of these compounds. The compounds with x≤0.6 demonstrated two magnetic phase transitions (ferromagnetic to paramagnetic and antiferro-magnetic to ferromagnetic) both of which were first order. Anomalies in the magnetocaloric effect, electroresistivity and magnetoresistivity were observed in the temperature ranges of the magnetic phase transitions. The temperature dependences of MCE and magnetoresistivity for these compounds correlated with the temperature dependence of magnetization.     

Crystal structure,thermal expansion and electrical conductivity of Pr（Ga1-xCox）0.9Mg0.1O3-δ （x=0, 0.1, 0.2, 0.3）

Pr（Ga1-xCox）0.9Mg0.1O3-δ （x=0, 0.1, 0.2, 0.3） was synthesized using solid-state reaction technique to study the effects of Co doping on their structure and properties. Room and high temperature XRD, DSC and electrical conductivity measurement with D.C. four-probe technique were adopted in the study. The results indicated its orthorhombic-distorted perovskite structure at room temperature. PrGa0.9Mg0.1O3-δ maintained its orthorhombic-distorted structure between 298 and 1173 K. For Pr（Ga0.7Co0.3）0.9Mg0.1O3-δ, such structure existed below 873 K. From 873 to 1173 K, it possessed tetragonal structure. The transformation from orthorhombic to tetragonal structure at 873 K was of second order. The intrinsic volume thermal expansion of tetragonal structured Pr（Ga0.7Co0.3）0.9Mg0.1O3-δ Was about 50% higher than those of PrGa0.9Mg0.1O3-δ. The electrical conductivity increased with Co content. The activation energies of conduction for Pr（Ga1-xCox）0.9Mg0.1O3-δ are in range from 0.197 to 0.246 eV, much lower than 1.543 eV for PrGaO3.     

Effect of Metal Oxide Doping into Ce0.5Zr0.5O2 on Catalytic Activity of MnOx/γ-Al2O3/Ce0.45Zro.45M0.1Ox （M = Y, La, Mn） Honeycomb Catalysts

This article showed that the catalytic activity of MnOx/γ-Al2O3/Ce0.5Zr0.5O2 monolithic catalyst toward the catalytic combustion of ethanol in a fixed bed reactor could be greatly improved by doping three metal oxides into Ce0.5Zr0.5O2. The catalytic activity of MnOx/γ-Al2O3/Ce0.45Zr0.45M0.1 Ox （M = Y, La, Mn） is better than that of MnOx/γ-Al2O3/Ce0.5 Zr0.5O2. The order of activity of the catalysts is as follows： MnOx/γ-Al2O3/Ce0.45Zr0.45Y0.1Ox 〉 MnOc/γ-Al2O3/Ce0.45 Zr0.45La0.1Ox 〉 MnOx/γT-Al2O3/Ce0.45Zr0.45Mn0.1Ox 〉 MnOx/y-Al2O3/Ce0.5Zr0.5O2. The influence of the loading amount of manganese oxide in enhancing the catalytic activity of MnOx/γ-Al2O3/Ce0.45Zr0.45Y0.1 Ox was investigated. The results showed that when MnO2 loading amount was 10% （mass fraction）, the MnOx/Al2O3/Ce0.45Zr0.45Y0.1Ox catalyst recorded the highest activity.     

Study on Ferroelectric and Dielectric Properties of La-Doped CaBi4Ti4O15-Based Ceramics

Research on bismuthlayer structuredferroelectricceramics as piezoelectric material with high Curie tem-perature ,strong anisotropic characters ,lowdielectricdissipationfactor and lowaging rate has attracted in-creasing interest[1,2].It can be used to manu…     

Extraordinary Transport Behaviors of La0.67Sr0.33Mn1-xCrxO3（0.00≤x ≤0.30）

M-T curves, ρ-T curves and MR-T curves of La0.67Sr0.33Mn1-xCrxO3（0.00≤ x ≤0.30） were studied. Experimental results indicate that the substitution of Cr on Mn sites is impotent in driving Tc, but with an increase of Cr content, there appear two peaks in resistivity and MR response, thus the temperature range of CMR response is significantly broadened. The extraordinary transport behavior and the abnormal CMR effect could be the results of coexistence and competition of Mn^3 ＋ -O-Mn^4 ＋ and Mn^3＋ -O-Cr^3 ＋ channels.     

Magnetic susceptibility of Al2RE compounds in crystal and liquid states

Magnetic susceptibility of Al2RE (RE=Y, Ce, Sm, Gd, Dy, Ho, Yb) compounds was studied experimentally in wide temperature (T=290-2000 K) and field (B=0.3-1.3 T) intervals. The abnormal increase in susceptibility beginning above the melting point was fixed for all the compositions. The values for the effective magnetic moments per RE atoms in these compounds were found to be smaller than the values typical for free ions RE3+. The results were discussed in supposition of the directed bonds between aluminum and rare-earth atoms.     

A-site defects in LaSrMnO_3 perovskite-based catalyst promoting NO_x storage and reduction for lean-burn exhausts

Herein,we report the high De-NO_x performance of the A-site defective perovskite-based Pd/La_(0.5)Sr_(0.3)MnO_3 catalyst.The formation of the defective perovskite structure can be proved by both the increased Mn~(4+)/Mn~(3+) ratio and serious lattice contraction due to cationic nonstoichiometry.It promotes the Sr doping into perovskite lattice and reduces the formation of the SrCO_3 phase.Our results demonstrate that below 300℃ the A-site defective perovskite can be more efficiently regenerated than the SrCO_3 phase as NO_x storage sites due to the latter's stronger basicity,and also exhibits the higher NO oxidation ability than the A-site stoichiometric and excessive catalysts.Both factors promote the lowtemperature De-NO_x activity of the Pd/La_(0.5)Sr_(0.3)MnO_3 catalyst through improving its NO_x trapping efficiency.Nevertheless,above 300℃,the NO_x reduction becomes the determinant of the De-NO_x activity of the perovskite-based catalysts.A-site defects can weaken the interactions between perovskite and Pd,inducing activation of Pd sites by in-situ transformation from PdO to metallic Pd in the alternative leanburn/fuel-rich atmospheric alternations,which boosts the De-NO_x activity of the Pd/La_(0.5)Sr_(0.3)MnO_3 catalyst.The Pd/L_(0.5)Sr_(0.3)MnO_3 catalyst exhibits the high sulfur tolerance as well.These findings provide insight into optimizing the structural properties and catalytic activities of the perovskite-based catalysts via tuning formulation,and have potential to be applied for various related catalyst systems.     

Synthesis, and measurement of structural and magnetic properties, of La1-xNaxFeO3(0.0≤x≤0.3) perovskite oxides

Polycrystalline La_1-xNa_xFeO₃ (0.0≤x≤0.3) solid solutions were synthesized by a solution combustion method using glycine as a fuel. The combustion synthesized compounds were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), diffused reflectance (DR) in the UV-vis, and magnetic measurements. The crystal structure examined by X-ray powder diffraction indicated that the samples were single phase and crystallized in an orthorhombic (space group, Pbnm no.62) structure. The parent and sodium-substituted compounds showed canted anti-ferromagnetic behavior associated with an increase in magnetic moment as Na content increased. The changes in magnetic properties of the materials were correlated to the changes in structural features, as shown by Rietveld structural refinement of the materials.     

Nanoscratch behaviors of La0.7Sr0.3MnO3＋δ thin films

The nanoscratch behaviors of La0.7Sr0.3MnO3＋δ films, which were deposited with ratio of O2/（O2＋Ar）, ranging from 4.4% to 45.6% by DC magnetron sputter, were investigated by a nanoindentation technique. The results indicated that the friction coefficient between the films and the diamond tip depended on the loading critical load. The friction coefficient was about 0.08-0.12 when the loading normal load was less than the loading critical load. The films displayed excellent elastic recovery after unloading. When the loading load was larger than the loading critical load, plastic deformation and ploughing appeared for the films. The friction coefficient was about 0.43 when the film was damaged completely. The suitable decrease in ratio of O2/（O2＋Ar） could improve the nanoscratch resistance of the films. The film deposited with O2/（O2＋Ar）=25% possessed better scratch resistance due to good elastic recovery, high nanohardness, and critical load. The loading critical load of the film was larger than 80 raN.     

Effect of the partial substitution of samarium for lanthanum on the structure and electrochemical properties of La_(15)Fe_(77)B_8-type hydrogen storage alloys

La15Fe77B8 hydrogen storage alloys were prepared using a vacuum induction-quenching furnace. The results of X-ray diffraction(XRD) and scanning electron microscopy(SEM) suggested that La15–xSmxFe2Ni76Mn5B2(x=0, 2, 4, 6) alloys had multiphase structure including the main LaNi5 phase, La3Ni13B2 phase and(Fe, Ni) phase. With the increasing substitution of Sm for La, the main phase structure of alloys did not change, while the unit cell volumes decreased, the cycle stability was improved and the maximum discharge capacity decreased, but the low temperature maximum discharge capacity of the same substitution alloy was gradually approaching the maximum discharge capacity at room temperature, which showed that La15Fe77B8 hydrogen storage alloys of the partial substitution of Sm for La had better low-temperature dischargeability(LTD). For the same substitution alloys, self-discharge characteristics and cycle stability at low temperature were better than that at room temperature. Furthermore, the high-rate dischargeability(HRD) and the exchange current density I0 first increased and then decreased with the increasing of Sm content, whereas the hydrogen diffusion coefficient D in alloy bulk decreased gradually, which indicated that appropriate substitution of Sm for La improved the electrochemical kinetics properties of the alloys. The HRD was mainly dominated by the charge-transfer rate on the alloy surface.     

Effect of metal doping into Ce0.5Zr0.5O2 on catalytic activity of MnOx/Ce0.5–xZr0.5–xM0.2xOy/Al2O3 for benzene combustion

The research investigated the effect of doping two metals separately or together into Ce0.5Zr0.5O2 on the catalytic activity of MnOx/Ce0.5-xZr0.5-xM0.2xOy/Al2O3 （M=Y, Mn, Y and Mn） for catalytic combustion of benzene. The prepared catalysts were characterized by X-ray diffraction （XRD）, surface area analysis, oxygen storage capacity （OSC）, and H2-temperature programmed reduction （H2-TPR）. Catalytic test was performed on a conventional fixed bed flow reactor. The characterization results revealed that Y and Mn ions entered into the ceria-zirconia mixed oxides framework, which improved the textural properties and greatly promoted the MnOx dispersion on the support surface. The complete conversion temperature of benzene on MnOx/Ce0.4Zr0.4Y0.1Mn0.1Oy/Al2O3 was 563 K, and the selectivity of carbon dioxides was 99%. This catalyst could be applied in a wide range of GHSV and wide concentration condition, showing great potential for application.     

Structural,magnetic and electrical characterization of the La0.7Ca0.3Co1–xMnxO3（x=0,0.7 and 1） compounds prepared by a simple method

Structural, magnetic and electrical properties of the La0.7Ca0.3Co1–xMnxO3（x=0, 0.7 and 1） samples prepared by a simple method were systematically studied and it was found that the crystal structure was transformed from rhombohedral for La0.7Ca0.3CoO3（LCCO） and La0.7Ca0.3Co0.3Mn0.7O3（LCCMO） samples to orthorhombic for La0.7Ca0.3MnO3（LCMO） sample. The AC magnetic susceptibility measurements showed that LCCO sample underwent a transition from paramagnetic（PM） to ferromagnetic（FM） phase at Curie temperature, TC~155 K and below Curie temperature, the glassy ferromagnetism nature was observed. In LCCMO sample,clear evidence of spin glass（SG） state was observed at low temperature. PM-FM phase transition at about TC~260 K and long range FM order at low temperatures were observed in LCMO sample. Both the LCCO and LCCMO samples exhibited insulating behavior in the whole range of measuring temperature whereas the LCMO sample underwent a clear metal-insulator（MI） transition at about TMI~263 K, corresponding to Curie temperature. Metallic region of ρ（T） curve of the LCMO sample was fitted to the model of electron-electron and electron-magnon scattering. The charge carrier transport behavior in all the samples was compared based on polaronic models.     

Relationship between crystal growth mode,preferred orientation and magnetostriction of （Tb0.3Dy0.7）Fe1.95 alloys

The relationship between crystal growth mode, preferred orientation and magnetostrictive properties of （Tb0.3Dy0.7）Fe1.95 alloys was investigated at different directional solidification rates. The results showed that preferred orientation had a strong influence on the characteristics of （Tb0.3Dy0.7）Fe1.95 alloys. At lower solidification rates, the sample with 〈110〉 preferred orientation showed larger low-field magnetostriction and apparent compressive stress effect. The excessive solidification rate resulted in failure of preferred orientation and a poor magnetostrictive performance. With an increase in solidification rates, the crystal growth modes changed gradually from cellular and primary dendrite morphology to developed dendritic morphology. In addition, domain configurations were observed using magnetic force microscopy, and the change of magnetostrictive properties was interpreted in terms of revealing the domain configurations.