Image segmentation of a color-blindness plate

One way of testing color vision is with a color-blindness plate (CBP) consisting of a set of brilliant colored dots to form a pattern (a figure) and a set of other colored dots to form a background. Classification of such a type of color image into a pattern and a background with a traditional technique is difficult. Based on a self-organizing feature map and a labeling process as well as spatial distance computation, an effective approach to the segmentation of a CBP image is presented. We describe the principle of a CBP segmentation and then introduce the CBP. The proposed approach is described, and its experimental results are presented. We conclude that the method can segment the CBP image into a pattern and a background successfully.     

并联机床的动力学特性对加工精度影响的分析

为了提高并联机床的加工精度,分析了并联机床的动力学特性对加工精度的影响。根据牛顿—欧拉方程,得到并联机床的动力学方程,解得连杆的驱动力;根据杆件轴向伸长量与受力之间的关系,得到连杆的长度误差;以无长度误差的连杆长度为优化目标,用优化的方法,得到动平台的位姿,并与连杆有长度误差时动平台的位姿比较,得动平台的位姿误差;根据刀具在动平台坐标系中位置,得刀具加工位置误差及对被加工零件精度的影响。结果表明：并联机床连杆的长度误差,引起刀具加工位置误差,使被加工零件产生形位误差和尺寸误差;并联机床电主轴偏心引起连杆的长度误差的扰动,产生刀具加工位置的扰动误差,影响被加工零件的表面粗糙度。     

Similarity solutions for slender dry patches with thermocapillarity

The lubrication approximation is used to investigate slender dry patches in an infinitely wide film of viscous fluid flowing steadily on an inclined plane that is either heated or cooled relative to the surrounding atmosphere. Four non-isothermal situations in which thermocapillary effects play a significant role are considered.Similarity solutions describing a thermocapillary-driven flow with a dry patch that is widening or narrowing due to either gravitational or surface-tension effects on a non-uniformly heated or cooled substrate are obtained, and examples of these solutions, when the substrate temperature gradient depends on the longitudinal coordinate according to a general power law, are presented. When gravitational effects are strong, the solution contains a free parameter, and for each value of this parameter there is a unique solution representing both a narrowing pendent dry patch and a widening sessile dry patch, whose transverse profile has a monotonically increasing shape. When surface-tension effects are strong, the solution also contains a free parameter, and for each value of this parameter there is both a unique solution representing a narrowing dry patch, whose transverse profile has a monotonically increasing shape, and a one-parameter family of solutions representing a widening dry patch, whose transverse profile has a capillary ridge near the contact line and decays in an oscillatory manner far from it.Similarity solutions are also obtained for both a gravity-driven and a constant-surface-shear-stress-driven flow with a dry patch that is widening or narrowing due to thermocapillarity on a uniformly heated or cooled substrate. The solutions in both cases contain a free parameter, and for each value of this parameter there is a unique solution representing both a narrowing dry patch on a heated substrate and a widening dry patch on a cooled substrate, whose transverse profile has a monotonically increasing shape.     

Formation of a Nanophase Wetting Layer and Metal Growth on a Semiconductor

Based on the data on the atomic density of a film and degree of its homogeneity during the formation of the interface between 3d transition metals (Cr, Co, Fe, or Cu) and silicon, a new concept of forming a contact between a reactive metal and a semiconductor has been justified. According to this concept, the low-temperature vapor-phase deposition of a metal onto a semiconductor is accompanied by the formation of a two-dimensional nanophase wetting layer of a metal or its mixture with silicon with a thickness of several monolayers, which significantly affects the interface formation and structure. This concept changes a perspective of forming a contact between a metal and a semiconductor substrate: it is necessary to take into account not only the formation of surface phases and clusters and/or the mixing process, but also the effect of elastic wetting of a substrate by the forming phases.     

六边形孔蜂窝梁和蜂窝组合梁抗剪性能分析

该文对不同参数下的正六边形孔蜂窝梁和蜂窝组合梁抗剪性能进行了试验与有限元分析研究。以试验研究为基础,基于有限元软件ABAQUS 建立非线性有限元模型,对不同开孔率、不同翼缘宽度和厚度的蜂窝梁和蜂窝组合梁进行分析比较,发现蜂窝梁和蜂窝组合梁抗剪承载力大小与翼缘厚度、开孔率和连接程度均有关。结果表明:蜂窝梁翼缘厚度变化对其抗剪承载力影响较大,而蜂窝组合梁中翼缘厚度的变化对其抗剪性能影响相对较小;混凝土板提高了蜂窝梁的抗剪极限承载能力;最后,给出蜂窝梁和蜂窝组合梁抗剪计算公式。     

On the Elastic Coupling Through the Flux Lines and Magnetic Interaction

It is defined the magnetic interaction energy between two superconductor pieces situated in a magnetic field by using the elastic coupling through the flux lines. On this basis, it is shown that a force between a superconducting material and a source of magnetic field is always repulsive, the force between a ferromagnetic material and a source of magnetic field is always attractive and a force between a normal metal and a source of time-varying magnetic field is always repulsive.     

Unstable resonator with reduced output coupling

The properties of a laser beam coupled out of a standard unstable laser resonator are heavily dependent on the chosen resonator magnification. A higher magnification results in a higher output coupling and a better beam quality. But in some configurations, an unstable resonator with a low output coupling in combination with a good beam quality is desirable. In order to reduce the output coupling for a particular resonator, magnification fractions of the outcoupled radiation are reflected back into the cavity. In the confocal case, the output mirror consists of a spherical inner section with a high reflectivity and a flat outer section with a partial reflectivity coating. With the application of the unstable resonator with reduced output coupling (URROC), magnification and output coupling can be adjusted independently from each other and it is possible to get a good beam quality and a high power extraction for lasers with a large low gain medium. The feasibility of this resonator design is examined numerically and experimentally with the help of a chemical oxygen iodine laser.     

A case-based reasoning approach toward developing a belief about the cost of concept

It is generally acknowledged that product development involves a sequence of decision making under uncertainty, including setting target requirements for a new product, selecting product concept, and developing conceptual and detailed design of a chosen concept. To select a product concept, engineers need to assess the uncertainty of a future market share, market size, and a cost of concept (cost of the final product developed from a concept). This paper proposes a case-based reasoning (CBR) approach to model beliefs about the uncertainty of a cost of concept. The proposed CBR approach consists of storing information about various products in a knowledge-base, defining a new product concept, retrieving a cluster of products in the knowledge-base that are highly similar to the concept, and adapting the cost of the retrieved product to construct a distribution of the cost of concept. This paper illustrates the proposed approach using printers as an example.     

Design and evaluation of a low-cost multistatic netted radar system

This paper reports on the design and initial evaluation of a low-cost multistatic radar system that exploits digital components. The system is based on a commercial-off-the-shelf and open architecture approach, using a direct digital synthesiser, a field programmable gate array and a digital signal processor as core components. Instrument function testing, calibration and the results of the initial field tests are reported. Some of the first multistatic experimental results are reported and demonstrate a number of aspects of the performance of such a configuration. The advantages and limitations of a low-cost digital radar design are discussed and further system development possibilities outlined. This system will enable the collection of a wide range of novel multistatic data and has the potential to demonstrate a number of new radar applications.     

Pd-C高温共晶点复现装置研制

主要针对Pd-C高温共晶点复现装置的组成进行介绍,其中包括复现用高温均热炉炉体、温度控制系统、真空泵、充气保护装置、水冷系统、复现用的石墨坩埚、二等B型标准热电偶和Pt-Pd热电偶等。针对石墨坩埚的灌注和共晶点复现过程进行了描述,根据复现的试验数据进行了相应的分析。     

Application of a new orthogonal-flux-type amorphous core tohigh-frequency parametric inverters and three-phase measuringtransformers

The fundamentals of a parametric oscillator using an orthogonal-flux-type amorphous core are described, and several applications are proposed. The parametric oscillator circuit has a power-conversion efficiency of 42% and automatic overcurrent protection. The flux distribution calculated by the finite-element method (FEM) suggests that the discharge of a tuning capacitor generates a circulating flux in a leg of the core. The parametric oscillator, a self-oscillating invertor using a Royer circuit, shows an efficiency of 47% at 18.5 kHz and offers overcurrent protection. As a separately controlled parametric inverter, it operates at a frequency of 74 kHz and shows an efficiency of 14% at the maximum output power of 11 W. It can also be used as a potential transformer and as a current transformer in a three-phase system     

Loss factors of mirrors for a gravitational wave antenna

Low-loss mirrors fabricated by ion-beam-sputtering machines for possible application in an interferometric gravitational wave antenna were evaluated by use of Nd:YAG laser light (lambda = 1064 nm) with two distinct measurements: a tabletop experiment that used a short cavity with a small beam with a beam waist of approximately 2w(0) = 0.82 mm, and an optical test that used a 20-m prototypical gravitational-wave detector with a large beam with a beam waist of approximately 2w(0) = 4.4 mm. A multilayer coating comprised 29 layers of SiO(2)/Ta(2)O(5) and one protective coating of SiO(2). The best values obtained as a result of these measurements were 16 ppm (parts in 10(6)) and 30 ppm in total loss, respectively. Also, a two-dimensional loss map generated by use of a small beam successfully revealed the existence of a loss structure within the coating surface. These results imply that a high-reflectance multilayer coating has some inhomogeneities and a loss distribution with a typical scale of a few millimeters and that the total measured losses depend on the beam spot size.     

Unidirectional single-mode Nd:YAG laser with a planar semimonolithic ring cavity

Unidirectional single-mode operation of a diode-pumped Nd:YAG laser with a planar semimonolithic ring cavity has been demonstrated at 1064 nm. The semimonolithic cavity consists of a laser active medium placed in a magnetic field, a crystal quartz plate, and an output coupling mirror, which form an optical diode by acting as a Faraday rotator, a reciprocal polarization rotator, and a partial polarizer, respectively. A single-mode output power of 155 mW and a slope efficiency of 17% were obtained with a 1.2-W diode laser at 809 nm. A laser linewidth of less than 100 kHz is inferred from a beat note frequency spectrum between two identical laser systems and continuous tuning to greater than 2 GHz was observed.     

Developing a product–service system through a productisation strategy: a case from the 3PL industry

A Product–Service System (PSS) is created by combing a tangible product and an intangible service into one integrated offering. Thus, a PSS can be achieved by a production company adding intangible services to a product using a servitisation strategy or by a service company adding a tangible product to a service by means of a productisation strategy. The focus of this paper is on the latter. Our work demonstrates a significant gap in the literature in this area. To address this, we adapt an existing PSS conceptual framework as a means to identify the driving and restraining forces considered by a service company as it explored the possibility of pursuing a PSS productisation strategy. The conceptual framework is applied in an exploratory case study with a 3PL service provider. Application of the framework reveals new driving and restraining forces not previously discussed in the literature. Furthermore, it allows a preliminary quantification of the driving and restraining forces using a force field analysis approach. Our work contributes towards the expansion of the empirical knowledge base in the area of PSS.     

Mutation-periodic quivers, integrable maps and associated Poisson algebras

We consider a class of map, recently derived in the context of cluster mutation. In this paper, we start with a brief review of the quiver context, but then move onto a discussion of a related Poisson bracket, along with the Poisson algebra of a special family of functions associated with these maps. A bi-Hamiltonian structure is derived and used to construct a sequence of Poisson-commuting functions and hence show complete integrability. Canonical coordinates are derived, with the map now being a canonical transformation with a sequence of commuting invariant functions. Compatibility of a pair of these functions gives rise to Liouville's equation and the map plays the role of a B?cklund transformation.     

Selective High‐Frequency Mechanical Actuation Driven by the VO2 Electronic Instability

Relaxation oscillators consist of periodic variations of a physical quantity triggered by a static excitation. They are a typical consequence of nonlinear dynamics and can be observed in a variety of systems. VO₂ is a correlated oxide with a solid‐state phase transition above room temperature, where both electrical resistance and lattice parameters undergo a drastic change in a narrow temperature range. This strong nonlinear response allows to realize spontaneous electrical oscillations in the megahertz range under a DC voltage bias. These electrical oscillations are employed to set into mechanical resonance a microstructure without the need of any active electronics, with small power consumption and with the possibility to selectively excite specific flexural modes by tuning the value of the DC electrical bias in a range of few hundreds of millivolts. This actuation method is robust and flexible and can be implemented in a variety of autonomous DC‐powered devices.     

Near-field optical taper antennas fabricated with a highly replicable ac electrochemical etching method

This paper describes a novel chemical etching method to fabricate high quality near-field optical antennas-tapered metallic tips-from gold wire in a reproducible way for optically probing a specimen on the nanoscale. A new type of an electrochemical cell is introduced and different dc and ac etching regimes are studied in detail. The formation and dynamics of a meniscus around a gold wire immersed in an electrolyte when supplying a square wave voltage are considered. We show that in situ etching current kinetics allows one to improve a yield of tips with a well-defined geometry up to 95% by filtering these on the basis of a cutoff current and a power spectrum of etching current fluctuations. As a quantitative measure for estimating the yield we introduce a probability to find tips with curvature radii falling in the range of interest. Testing the tips for a plasmonic effect is implemented with tip-enhanced Raman spectroscopy and sub-wavelength imaging of a thin fullerene film.     

Lensed fiber probes designed as an alternative to bulk probes in optical coherence tomography

We demonstrate a compact all-fiber sampling probe for an optical coherence tomography (OCT) system. By forming a focusing lens directly on the tip of an optical fiber, a compact sampling probe could be implemented. To simultaneously achieve a sufficiently long working distance and a good lateral resolution, we employed a large-mode area photonic crystal fiber (PCF) and a coreless silica fiber (CSF) of the same diameters. A working distance of up to 1270 microm, a 3 dB distance range of 2210 microm, and a transverse resolution of 14.2 microm were achieved with the implemented PCF lensed fiber; these values are comparable to those obtainable with a conventional objective lens having an NA of 0.25 (10 x). The performance of the OCT system equipped with the proposed PCF lensed fiber is presented by showing the OCT images of a rat finger as a biological sample and a pearl as an in-depth sample.     

Sampling and real-time methods in electro-optic probing system [LSItesting]

Sampling and real-time methods in electro-optic (EO) probing systems using a laser diode (LD) for measuring the voltage waveform at internal nodes of the high-speed LSI are described, comparing performance to other electric instruments. The voltage sensitivity was improved by using an external ZnTe E-O probe and a low-noise LD. A sampling system using a pulsed LD has a frequency bandwidth of 10 GHz and a minimum detectable voltage of 430 μV/√Hz. The corresponding values for a real-time system using a CW LD and a high-speed photodetector are 480 MHz and 23 mV with 700 accumulations. Each system is based on a mechanical prober and a microscope. The advantages of a high temporal resolution, noncontact and noninvasive method are demonstrated during various measurements in several different areas: standing waves on a stripline, ring resonator and voltage waveform characteristics in a high-speed MMIC by the sampling method, long logic pattern signal, voltage waveforms at internal nodes in an ECL IC and those of a transport electrode in CCD by the real-time method     

On the theory of thin bodies

It is shown that, in accordance with the law of plane sections representing the basis of the theory of thin bodies, two analogies are true: a nonstationary analogy and a stationary one. Within the framework of the stationary analogy, a new-type expansion reducing a three-dimensional problem to a stationary two-dimensional one is introduced. The asymptotic conditions of validity of the stationary and nonstationary analogies were determined and the boundary-layer conceptions for both cases were compared. Solutions of the internal and external problems on a two-dimensional flow in a narrow zone were obtained in the closed form. An asymptotically correct mathematical model of a flow in a film is proposed. The stationary and nonstationary analogies for a swirling flow around a body and a flow around a rotating body were determined. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 5, pp. 45–54, September–October, 2007.