基于图像的三维分层重构算法研究

文章研究在摄像机内参数不变的情况下,利用图像中场景的结构信息实现分层重构的方法.通过求解基础矩阵实现射影重构,通过求解无穷远平面单应矩阵实现仿射重构,利用虚圆点约束求解绝对二次曲线的像实现欧氏重构.实验表明所研究的算法是有效可行的.     

一种多视图分层重构算法研究

本文介绍了基于奇异值分解的射影重构算法的一般框架,以测量矩阵的秩为4作为约束,以仿射投影逼近透视投影,利用共轭梯度法估计射影深度,通过奇异值分解实现射影重构.利用共轭梯度法确定Kruppa方程中的未知比例因子,然后利用所确定的比例因子线性求解Kruppa方程,进而标定摄像机内参数.在摄像机内参数已知的情况下,求解一个满足欧氏重构条件的非奇异矩阵,然后通过此矩阵将射影重构变换为欧氏重构.实验结果表明所给出的算法是行之有效的.     

基于自适应未知输入观测器的非线性动态系统故障诊断

针对以往故障诊断研究中要求故障或故障导数及系统干扰的上界是已知的不足,以及难以同时诊断执行器故障和传感器故障的问题,提出一种自适应未知输入故障诊断观测器,能够同时重构非线性动态系统的执行器故障和传感器故障.首先,利用H_∞性能指标抑制未知输入对故障重构的影响,采用Lyapunov泛函得到观测误差动态系统的稳定性;然后,通过线性矩阵不等式求解观测器增益阵,并实现故障重构;最后,通过直流电机系统的仿真验证了所提出方法的有效性.     

一种自适应观测矩阵下的信号重构算法*

为提高压缩感知的性能,设计了一种自适应的稀疏观测矩阵,该观测矩阵由0和1组成。信号重构时,利用观测值的位置信息,避免了求解不定方程组,提高了重构速度。采用具有频域稀疏特性的深海隔水管受力参数作为仿真信号,仿真结果表明,观测值数目相同时,自适应观测矩阵下重构算法的平均误差比随机观测矩阵下基追踪算法的平均误差小。     

采用预估L2–L∞滤波器的传感器信号重构

对于含有未建模动态的SIMO系统,本文提出利用预估L_2–L_∞滤波器实现对故障传感器信号的重构.通过建立故障信号与最小相对阶的测量信号间的传递函数阵,由相对阶最小的测量信号实现对故障传感器信号的预估,并在此预估信号基础上,结合L_2–L_∞滤波器存在条件,给出预估L_2–L_∞滤波器设计及其参数求解方法.通过将预估L_2–L_∞滤波器、L_2–L_∞滤波器及部分状态观测器在飞行器故障传感器信号重构中的对比,并由蒙特卡洛仿真实验,预估L_2–L_∞滤波器实现的由俯仰角速度对迎角信号的重构精度最高,且当系统矩阵及控制输入矩阵的未建模动态在±30%及±20%内浮动时,迎角重构误差小于0.1?.     

基于自适应滑模观测器的不匹配非线性系统执行器故障重构

针对一类含有未知干扰的不匹配非线性Lipschitz系统,提出了基于自适应滑模观测器的执行器故障重构方法.首先引入辅助输出矩阵,使得辅助输出系统的观测器匹配条件得以满足,同时设计了高增益观测器实现对未知辅助输出的精确估计;然后针对辅助输出系统建立故障重构滑模观测器,设计了自适应律在线修正滑模控制器增益,考虑故障上界未知的前提下,提出了观测器状态估计误差稳定的存在定理,运用Schur补引理将观测器反馈增益矩阵设计方法转化为求解线性矩阵不等式约束优化问题,同时引入线性变换矩阵,在故障上界未知的前提下设计了滑模控制增益,使得输出估计误差收敛稳定,确保了滑模运动在有限时间内发生,在此基础上利用等效控制输出误差注入原理实现了执行器故障重构;最后通过仿真算例验证了本文方法的有效性.     

基于邻接矩阵利用Excel求距离矩阵

利用Excel中的函数研究了邻接矩阵的幂矩阵,以及通过幂矩阵求解有向图的距离矩阵的Excel解法,尤其是图中结点较多时使该问题变得非常容易求解。     

基于分离字典构造的快速压缩感知重构算法

针对当前压缩感知重构算法存在重构质量偏低、重构时间过长等问题,提出了基于矩阵流形分离字典构造的分块压缩感知重构算法。首先,该算法基于矩阵流形模型训练出可分离稀疏表示矩阵,并对其正交化;其次,构造随机测量矩阵,并利用矩阵运算将其与得到的稀疏表示矩阵进行结合,进而构造出一组分离字典;最后,将该字典用于信号压缩感知中,并通过线性运算实现信号的快速重构。实验结果表明,与当前主流的压缩感知重构算法相比,所提算法在重构精度以及重构时间上都具有一定提升,并在对实时性要求高的领域中具有很好的应用价值。     

通用矩阵类库的Java实现技术

该文根据矩阵的存储、操作、分解、求解等特性,利用Java语言,提出并实现了一个通用的矩阵类库框架。它具有良好的通用性、跨平台操作性和代码重用性,为矩阵类库本身的扩展以及基于矩阵的求解算法(包括并行求解)等方面的研究打下了基础。     

FPGA架构上面向稀疏矩阵求解的静态调度算法

在电力系统仿真中,大型稀疏矩阵的求解会消耗大量存储和计算资源,未有效利用矩阵的稀疏性将导致存储空间浪费以及计算效率低下的问题。当前关于稀疏矩阵求解算法的研究主要针对众核加速硬件,聚焦于挖掘层次集合的并行度以提升算法的并行效率,而在众核处理器架构上频繁地进行缓存判断及细粒度访问可能导致潜在的性能问题。针对基于现场可编程门阵列（FPGA）的下三角稀疏矩阵求解问题,在吴志勇等设计的FPGA稀疏矩阵求解器硬件结构的基础上,提出一种静态调度求解算法。通过对稀疏矩阵进行预处理,设计数据分布和指令排布流程,将下三角稀疏矩阵的求解过程静态映射到多个FPGA片上的处理单元,以实现下三角稀疏矩阵在FPGA上的并行高速求解。将串行算法中所有的隐式并行关系排布到缓冲中,使得所有计算单元都能实现计算、访存和单元间通信的高效并行,从而最大限度地利用FPGA的硬件资源。典型算例上的测试结果表明,相较传统的CPU/GPU求解算法,该算法能够实现5~10倍的加速效果。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.