共查询到18条相似文献,搜索用时 132 毫秒
1.
通过减少奇数阵列波导的芯宽度,同时增加偶数阵列波导的芯宽度的技术,构造了箱型光谱-选用氟化聚芳醚FPE聚合物材料,设计并制备了17×17信道箱型光谱响应阵列波导光栅(AWG)波分复用器.测试结果表明,器件的中心波长为1550.87nm,波长间隔为0.8nm,3dB带宽约为0.476nm,串扰低于-21dB,插入损耗为13~15dB. 相似文献
2.
选用氟化聚芳醚FPE聚合物材料,设计并制备出了17×17信道光谱响应平坦化阵列波导光栅(AWG)波分复用器. 实验测试结果表明,器件的中心波长为1550.83nm,波长间隔为0.8nm, 3dB带宽约为0.476nm,插入损耗为13~15dB,串扰低于-21dB. 相似文献
3.
选用氟化聚芳醚FPE聚合物材料,设计并制备出了17×17信道光谱响应平坦化阵列波导光栅(AWG)波分复用器.实验测试结果表明,器件的中心波长为1550.83nm,波长间隔为0.8nm,3dB带宽约为0.476nm,插入损耗为13~15dB,串扰低于-21dB. 相似文献
4.
选用氟化聚芳醚FPE聚合物材料,设计并制备出了17×17信道光谱响应平坦化阵列波导光栅(AWG)波分复用器.实验测试结果表明,器件的中心波长为1550.83nm,波长间隔为0.8nm,3dB带宽约为0.476nm,插入损耗为13-15dB,串扰低于-21dB. 相似文献
5.
报道了一种在工艺制作过程中减小聚合物阵列波导光栅(AWG)器件光谱漂移的有效方法,通过调整波导芯层的旋涂转速来控制芯层的厚度进而可以有效地减小器件的光谱漂移.AWG器件的设计中心波长为1550.918 nm,制作的AWG器件的实际中心波长为1550.85 nm,即利用该方法使传输光谱的漂移减小到0.07nm,远远小于波长间隔0.8 nm,改善了器件的解复用功能. 相似文献
6.
7.
8.
9.
10.
光波导端面耦合自动调芯仪研制 总被引:15,自引:0,他引:15
设计了两种适用于光波导高精度对接耦合的自动调芯方案,这两种方案从原理上克服了常规调芯过程依赖于对微变信号精确测试的困难.提出了实现自动调芯的结构,完成了调芯系统的光机电一体化、相应的控制程序以及与计算机的接口界面.采用通信用单模光纤作为标准光波导做了端面耦合试验,自动调芯结果显示,在1310nm波长上,平均耦合损耗为0.075dB,标准误差为0.0099dB;在1550nm波长上,平均耦合损耗为0.062dB,标准误差为0.0066dB.自动调芯过程在2min内完成. 相似文献
11.
12.
Lee C.D. Wei Chen Qiang Wang Yung-Jui Chen Beard W.T. Stone D. Smith R.F. Mincher R. Stewart I.R. 《Lightwave Technology, Journal of》2001,19(11):1726-1733
The crosstalk performance of an arrayed-waveguide grating (AWG) multiplexer or demultiplexer is primarily caused by random optical phase errors introduced in the arrayed waveguides. Because the layout of waveguides on a wafer is patterned via photomask through the photolithography process, the resolution of a photomask has a direct influence on the phase errors of an AWG. The paper presents a theoretical analysis on the phase error caused by photomask resolution and other basic design parameters. Both calculation and measurement results show that a high-resolution photomask (better than 25 nm) is a critical requirement to produce low-crosstalk (less than -30 dB) AWG demultiplexers. We also investigate the effect of nonideal power distribution in the arrayed waveguides because it contributes considerable phase errors when material impurity is not well controlled during wafer fabrication. Basic criteria of power profile truncation, number of grating waveguides, and material index variation are also summarized 相似文献
13.
Eight-channel flat spectral response arrayed-waveguide multiplexer with asymmetrical Mach-Zehnder filters 总被引:1,自引:0,他引:1
K. Okamoto K. Takiguchi Y. Ohmori 《Photonics Technology Letters, IEEE》1996,8(3):373-374
An eight-channel flat spectral response arrayed-waveguide grating (AWG) multiplexer with asymmetrical Mach-Zehnder filters has been fabricated on the planar lightwave circuit (PLC). The monotonic spectral loss characteristics of AWG have been canceled by the opposite spectral response in the asymmetric MZ filter. The 1.5 dB bandwidth of 141 GHz and 3 dB bandwidth of 159 GHz are obtained for the 200 GHz channel spacing. The 1.5 dB bandwidth becomes 1.8 times wider than that of the conventional AWG. Crosstalks to neighboring and all other channels are less than -24 dB and the on-chip insertion losses range from 7.0 to 7.4 dB, respectively. 相似文献
14.
Joonoh Park Youngchul Chung Soohyun Baek Hyung-Jong Lee 《Photonics Technology Letters, IEEE》2002,14(5):651-653
We propose a new loss reduction method in star couplers employing UV-written tapers that replace the free propagation region in the conventional star couplers and apply them to an arrayed waveguide grating (AWG) device. The insertion loss of the new AWG device can be reduced to 0.31 dB, which is about 0.7 dB lower than that of the AWG without UV-written tapered waveguides 相似文献
15.
16.
Zhen Sheng Daoxin Dai Sailing He 《Lightwave Technology, Journal of》2007,25(10):3001-3007
Dual-tapered auxiliary waveguides at the exit of the waveguide array are introduced to improve the channel uniformity of an Si-nanowire-based arrayed waveguide grating (AWG) demultiplexer. By using a hybrid simulation method, the dual-tapered auxiliary waveguides of the AWG demultiplexer are optimized reliably and efficiently. A 12-channel AWG demultiplexer is designed as an example, and a small nonuniformity (< 0.5 dB) is achieved. 相似文献
17.
The operation principle of an arrayed waveguide grating(AWG) multiplexer is introduced and the 4×4 AWG with following design parameters is discussed in detail, such as the choice of wavelength, the neighboring arrayed waveguide distance ΔL, the channel frequency interval Δf, and the free spectral range. The structure of 4×4 AWG is designed and the result of stimulated test is also given. Analysis shows that the 4×4 AWG is characterized by a wide dynamic range, low crosstalk, better spectrum properties, and a compact structure. 相似文献
18.
Athermal all-polymer arrayed-waveguide grating multiplexer 总被引:6,自引:0,他引:6
Keil N. Yao H.H. Zawadzki C. Bauer J. Bauer M. Dreyer C. Schneider J. 《Electronics letters》2001,37(9):579-580
An athermal arrayed-waveguide grating (AWG) multiplexer relying on an all-polymer approach is reported. The all-polymer AWG consisting of polymer waveguides fabricated on a polymer substrate exhibits excellent performance. By properly adjusting the coefficient of thermal expansion of the polymer substrate, athermal and polarisation-independent AWG devices featuring a wavelength shift of less than ±0.05 nm in the 25-65°C temperature range could be demonstrated 相似文献