Preparation of poly(acrylic acid)/starch hydrogel and its application for cadmium ion removal from aqueous solutions

In this paper, potassium bromate/thiourea dioxide redox system was used to initiate the graft copolymerization reaction of acrylic acid onto maize starch. The so obtained polyacrylic acid/starch graft copolymer was crosslinked by further treatment with alkaline epichlorohydrin to get three dimensional hydrogel. This crosslinked hydrogel was used for the removal of the heavy element, Cd²⁺ from its aqueous solution by adsorption. All factors which are expected to affect the adsorption process, like adsorbent concentration, immersion time, graft yield of the adsorbent, Cd²⁺ concentration and adsorption temperature were extensively studied and reported in the text. The study and investigations demonstrated that the adsorption efficiency is affected by the adsorbent graft yield and the adsorption medium temperature. In addition, on fitting the data obtained from the adsorption process, it was found that the adsorption obeys both Langmuir and Freundlich adsorption isotherms but the Langmuir isotherm shows better mathematical fitting for the equilibrium data than does Freundlich model, based on the higher R² value for the Langmuir isotherm.     

Reusability and selective adsorption of Pb<Superscript>2+</Superscript> on chitosan/P(2-acrylamido-2-methyl-1-propanesulfonic acid-<Emphasis Type="Italic">co</Emphasis>-acrylic acid) hydrogel

Reusability and selective adsorption toward Pb²⁺ with the coexistence of Cd²⁺, Co²⁺, Cu²⁺ and Ni²⁺ ions on chitosan/P(2-acrylamido-2-methyl-1-propanesulfonic acid-co-acrylic acid) [CS/P(AMPS-co-AA)] hydrogel, a multi-functionalized adsorbent containing –NH₂, –OH, –COOH and –SO₃H groups was studied. The CS/P(AMPS-co-AA) was prepared in aqueous solution by a simple one-step procedure using glow discharge electrolysis plasma technique. The reusability of adsorbent in HNO₃, EDTA-2Na and EDTA-4Na was investigated in detail. The competitive adsorption of the metal ions at the initial stage was compared between their equal mass concentration and equal molar concentration. In addition, the adsorption mechanism of the adsorbent for adsorption of Pb²⁺ was also analyzed by XPS. The results showed that the optimum pH of adsorption was 4.8, and time of adsorption equilibrium was about 180 min. Adsorption kinetics fitted well in the pseudo second-order model. The equilibrium adsorption capacities of Pb²⁺, Cd²⁺, Co²⁺, Cu²⁺, and Ni²⁺ at pH 4.8 were obtained as 673.3, 358.3, 176.7, 235.0 and 171.7 mg g^?1, in their given order. The adsorbent displayed an excellent reusability using 0.015 mol L^?1 EDTA-4Na solution as the eluent, and the desorption ratio could not correctly reflect the true characteristics of adsorption/desorption process. Moreover, the adsorbent showed good adsorption selectivity for Pb²⁺. The molar adsorption capacity at the initial stage with equal molar concentration was more reliable than the mass adsorption capacity during the study of selective adsorption. According to the XPS results, the adsorption of Pb²⁺ ions by the CS/P(AMPS-co-AA) absorbent could be attributed to the coordination between N atom and Pb²⁺ and ion-exchange between Na⁺ and Pb²⁺.     

Electron Beam Grafted Polymer Adsorbent for Removal of Heavy Metal Ion from Aqueous Solution

Abstract

An electron beam grafted adsorbent was synthesized by post irradiation grafting of acrylonitrile (AN) on to a non‐woven thermally bonded polypropylene (PP) sheet using 2 MeV electron beam accelerator. The grafted poly(acrylonitrile) chains were chemically modified to convert a nitrile group to an amidoxime (AMO) group, a chelating group responsible for metal ion uptake from an aqueous solution. The effect of various experimental variables viz. dose, dose rate, temperature, and solvent composition on the grafting extent was investigated. PP grafted with the amidoxime group (AMO‐g‐PP) was tested for its suitability as an adsorbent for removal of heavy metal ions such as Co²⁺, Ni²⁺, Mn²⁺, and Cd²⁺ from aqueous solution. Langmuir and Freundlich adsorption models were used to investigate the type of adsorption of these ions. The adsorption capacities of the adsorbent for the metal ions were found to follow the order Cd²⁺>Co²⁺>Ni²⁺>Mn²⁺. The kinetics of adsorption of these ions indicated that the rate of adsorption of Cd²⁺ was faster than that of other ions studied.     

Enhanced amination and adsorption performance of functional copolymer synthesized <Emphasis Type="Italic">via</Emphasis> RAFT-mediated radiation grafting in emulsion

Grafted polymer substrates bearing diglycol amic acid (DA) ligands for Eu and Sm adsorption were prepared using a two-step post-grafting modification of polyethylene/polypropylene-g-poly(glycidyl methacrylate) (PE/PP-g-PGMA) that was synthesized through reversible addition-fragmentation chain transfer (RAFT)-mediated γ-radiation induced graft polymerization in emulsion phase. The PE/PP-g-PGMA prepared with RAFT mediation exhibited better reactivity towards amination reaction at 40 °C than the graft copolymers prepared without RAFT mediation, with the epoxide to amino group conversion of the former exceeding the latter by as much as 20%. The DA ligands were incorporated to the aminated graft copolymer by subsequent reaction with diglycolic anhydride to yield the DA-modified PE/PP-g-PGMA adsorbent. The effects of pH and competing ions on the uptake of Eu and Sm have been investigated. The DA-modified PE/PP-g-PGMA prepared with RAFT mediation showed higher Eu and Sm adsorption percentage than the DA adsorbent that was synthesized without RAFT mediation. The DA-modified PE/PP-g-PGMA exhibited higher affinity for Eu over Cu and Fe in acidic solutions.     

Osteogenic activities of polymeric soybean oil-g-polystyrene membranes

A novel biocompatible copolymer membrane was synthesized and characterized for use in guided bone regeneration using polymeric soybean oil-g-polystyrene (PSO-g-PS) graft copolymer which was successfully obtained by free radical polymerization of styrene initiated by PSO peroxide as a macroinitiator at 80 °C. Osteoblastic cellular activities of MC3T3-E1 cells on PSO-g-PS membranes with different soybean oil composition (PSO-g-PS1, PSO-g-PS2, and PSO-g-PS3) were evaluated. Nuclear magnetic resonance (¹H NMR) spectra showed that PSO inclusion (mol%) was found to be 27, 69, and 51 % for PSO-g-PS1, PSO-g-PS2, and PSO-g-PS3 membranes, respectively. Superior biocompatibility of the PSO-g-PS membranes was determined compared to polystyrene tissue culture plates (TCPS) as positive control. Cell proliferation was enhanced on PSO-g-PS2 and PSO-g-PS3 membranes compared to PSO-g-PS1 membranes (p < 0.001), and a statistically significant higher ALP value of MC3T3-E1 cells on PSO-g-PS2 membranes (p < 0.05) suggested that proliferation and differentiation of preosteoblastic on PSO-g-PS membranes were enhanced with regard to soybean oil content within the membranes. Thus, the present study suggests that PSO-g-PS2 membranes, which showed a favorable biological environment for the preosteoblastic cells, can be well suited for bone tissue engineering applications.     

Synthesis and characterization of PET fibers grafted with binary mixture of 2-methylpropenoic acid and acrylonitrile by free radical: its application in removal of cationic dye

Grafting of binary vinyl monomer mixtures such as 2-methylpropenoic acid (MPA) and acrylonitrile (AN) onto poly (ethylene terephthalate) fibers (PET) was achieved in an aqueous medium with using benzoyl peroxide like free radical initiator. A new reactively fibrous adsorbent was used for removal of dye such as methylene blue (MB) from aqueous media through batch sorption method. Fibers adsorbent was swelled in solution to support the graft and the subsequent polymerization of MPA/AN onto polyester fibers. Optimum conditions for grafting were discovered and reactive fiber were characterized. Variations of graft yield with time, temperature, initiator concentration and monomer mixture ratio were investigated. The optimum initiator concentration was found to be 8 × 10^?3 mol/L. The percentage of grafting rose steadily with the vinyl monomer mixture monomer concentration (50 %). The optimum temperature and polymerization time were found to be 80 °C and 120 min, respectively. The use of AN and MPA monomers together in grafting produce a significant increased in the graft yield. Experimental studies showed that the percentage removal of MB was a great higher on the MPA/AN grafted PET (MPA/AN-g-PET) fibers than on the original PET fibers. The adsorbed quantity of MB improved with pH and basic pH was appropriate for the elimination of MB. MPA/AN-g-PET fibers removed 98 % of cationic dye when initial concentration diverse from 10 to 80 mg L^?1 at pH 9.0. Almost all of the adsorbed cationic dye was eluted by ethanoic acid in methanol. Ten removal–desorption cycles indicated that the reactive fibers were favorable for repetitive use without notable change in removal capacity. Consequently, the MPA/AN-g-PET fibers have demonstrated potential as an effective adsorbent for the extremely effective removal of cationic dyes from aqueous media.     

Adsorption behaviors of the aminated chitosan adsorbent

Using inverse suspension technology, a novel aminated chitosan adsorbent with higher adsorption ability for metal cations and metal anions was prepared. Through cross-linking amination reaction, the content of amidocyanogen of aminated chitosan adsorbent was enhanced four times than that of chitosan cross-linked adsorbent. As can be seen from the results, the adsorption ability of the novel aminated chitosan adsorbent for (Nicit)⁻ and Cr(VI) was enhanced remarkably. When the initial concentration of metallic ion was 1,000 mg/L, the adsorption capacity of the novel aminated chitosan adsorbent for nickel citrate and Cr(VI) was up to 30.2 mg/g and 28.7 mg/g, respectively. And the adsorption capacity of the novel aminated chitosan adsorbent for Ni²⁺ was still higher. So the new aminated chitosan adsorbent offers not only a higher uptake for metal cations but also a better adsorption capacity for metal anions.     

Adsorption of Pb2+, Cu2+ and Co2+ by polypropylene fabric and polyethylene hollow fiber modified by radiation-induced graft copolymerization

Cation-exchange adsorbents were prepared by radiation-induced grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) fabric and polyethylene (PE) hollow fiber and subsequent phosphonation of epoxy groups of poly(GMA) graft chains. The adsorption characteristics of Pb²⁺, Cu²⁺ and Co²⁺ for the two cation-exchange adsorbents were studied. In the grafting of GMA onto PP fabric, the degree of grafting (%) increased with an increase in reaction time, reaction temperature, and pre-irradiation dose. The maximum grafting yield was observed around 60% GMA concentration. In 50, 130 and 250% GMA-grafted PP fabric, the content of phosphoric acid was 1.52, 3.40 and 4.50 mmol/g at 80 °C in the 85 % phosphoric acid aqueous solution for 24 h, respectively. The adsorption of Pb²⁺, Cu²⁺ and Co²⁺ by PP fabric adsorbent was enhanced with an increased phosphoric acid content The order of adsorption capacity of the PP fabric adsorbent was Pb²⁺>Co²⁺>Cu²⁺. In adsorption of Pb²⁺, Cu²⁺ and Co²⁺ by PE hollow fiber, the amount of Pb²⁺ adsorbed by the PE hollow fiber adsorbent containing 1.21 mmol/g of -PO₃H wasca. 54.4 g per kg. The adsorption amount of Cu²⁺ and Co²⁺ in the same PE hollow fiber wasca. 21.0 g per kg andca. 32.1 g per kg, respectively. The order of adsorption of the PE hollow fiber adsorbent was Pb²⁺>Co²⁺>Cu²⁺.     

Synthesis and characterization of graft copolymer of sodium alginate and poly(itaconic acid) by the redox system

In this study, grafting of itaconic acid (IA) onto sodium alginate (NaAlg) using cerium(IV) ammonium nitrate/nitric acid (CAN/HNO₃) as redox system was carried out by free radical polymerization. The structures of the grafted copolymers (NaAlg-g-PIA) were characterized by ATR-FTIR spectroscopy, NMR spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The reaction conditions for maximum grafting were optimized by varying the reaction time, temperature, percentage of sodium alginate, monomer, initiator, and nitric acid concentrations. The optimum reaction conditions were obtained with reaction time of 5 h, reaction temperature of 30 °C, IA concentration of 0.92 M, CAN concentration of 1.368 × 10^?1 M, HNO₃ concentration of 0.094 M and percentage of NaAlg 0.5 g/dL. The solubility test of NaAlg-g-PIA was also investigated using solvents. The results indicate that prepared graft copolymer was non-soluble in the various solvents, while it was soluble only in saturated solution of NaOH and promising as an adsorbent.     

Preparation of gel resins and removal of copper and lead from water

A series of gel resins were prepared by polymerizing glycidyl methacrylate (GMA) and 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) and functionalizing with ammonia (NH₃) and tetraethylenepentamine (TEPA). The aminated gel resins were then used as an adsorbent for the removal of heavy metal ions (Cu²⁺ and Pb²⁺). These gel resins containing amino groups and chelating amino groups had excellent adsorptive properties for Cu²⁺ and Pb²⁺. The adsorption process reached equilibrium in 40 min, and the adsorption capacities of Cu²⁺ and Pb²⁺ were 75.0 mg g^?1 and 266.6 mg g^?1 for the NH₃‐aminated gel resins and 57.5 mg g^?1 and 330.6 mg g^?1 for the TEPA‐aminated gel resins, respectively. After five adsorption–desorption processes, the adsorption capacities only decreased slightly. Thus, these aminated gel resins can be used as effective adsorbents for aqueous heavy metal ions (Cu²⁺ and Pb²⁺). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44466.     

Adsorption of Cu2+ Cations from Aqueous Solution by S-doped TiO2

S-doped TiO₂ as a novel adsorbent for Cu²⁺ cations removal from aqueous solutions was synthesized by simple sol-gel process. Removal of Cu²⁺ cations from aqueous solutions was investigated with particular reference to the effects of initial Cu²⁺ cations concentration, pH-value, adsorbent dosage, and temperature on adsorption. It was found that the maximum adsorption capacity was 96.35 mg g^?1 at 328 K. The adsorption equilibrium isotherms and the kinetic data were well described by the Langmuir and pseudo-second-order kinetic models, respectively. The high uptake capability of S-doped TiO₂ makes it a potentially attractive adsorbent for the removal of heavy metal pollutants from aqueous solution.     

Novel ion-imprinted adsorbent for lead removal from aqueous solutions,selectivity and adsorption capacity improvement,and evaluation of adsorption isotherms and kinetic

Novel ion-imprinted adsorbent on the basis of Fe₃O₄@SBA-15 was prepared and functionalized by diphenylcarbazide. Lead adsorption capacity of 124 mg g^?1 and good selectivity in the presence of Na⁺, K⁺, Ca²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Co²⁺, Fe²⁺, Mn²⁺, Cd²⁺, Cu²⁺ and Hg²⁺ were obtained. Adsorption was fast and equilibration established within 5 min. Magnetization measurement indicated that the adsorbent was readily separated by use of an external magnetic field. Upon regeneration, the used adsorbent retained most of its initial capacity. Various isotherm models were studied, and Sum of Squares of Errors (SSE) and Average Relative Error were calculated. The data were best fitted to the Redlich–Peterson isotherm.     

Novel magnetic polyamic hydrazide nanocomposite: Preparation,characterization, and application for the removal of cd2+ and pb2+ from industrial wastes

In this work, a novel polymer polyamic hydrazide (PAH) was synthesized via the reaction of terephthalohydrazide with pyromelitic dianhydride. The obtained PAH was characterized with nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT‐IR) spectroscopy and elemental analysis. Finally, a novel magnetic nanocomposite was prepared by immobilization of PAH on the Fe₃O₄ nanoparticles in water. The prepared magnetic nanocomposite was successfully used for selective removal of Pb²⁺ and Cd²⁺ ions from industrial wastes and the effects of affecting parameters on the adsorption capacity of the magnetic nanocomposite adsorbent for the removal of Pb²⁺ and Cd²⁺ from model aqueous solutions were investigated. The maximum adsorption capacities of Pb²⁺ and Cd²⁺ were found to be 138.9 and 103.1 mg g^?1, respectively. The kinetics and mechanism of the adsorption of Pb²⁺ and Cd²⁺ on the surface of the prepared nanocomposite were studied and it was found that complex formation between active sites of the surface of the nanocomposite and metal ions is the possible mechanism for adsorption of metal cations. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42538.     

Development of Functional Adsorbent From Textile Cotton Waste by Radiation Induced Grafting Process: Equilibrium and Kinetic Studies of Acid Dye Adsorption

An environment benign-aqueous solvent based-single step-radiation induced grafting process was used to graft Poly(vinylbenzyltrimethyl ammonium) chloride (PVBT) onto cellulosic cotton textile waste to transform it into a valuable cationic adsorbent (PVBT-g-Cellulose). The PVBT-g-Cellulose adsorbent was characterized by grafting yield determination, elemental analysis, scanning electron microscope (SEM), and fourier transformed infrared (FTIR) spectroscopy. The PVBT-g-Cellulose adsorbent, investigated for the removal of model dyes from manufactured solutions, exhibited equilibrium adsorption capacities of ～540 mg/g, ～474 mg/g, and ～122 mg/g for acid blue 25(AB25), acid yellow 99(AY99), and acid blue 74(AB74), respectively. The degree of agreement between the adsorption isotherm models and experimental data followed the order: Langmuir-Freundlich>Redlich-Peterson>Langmuir>Freundlich. The kinetic adsorption data was found to be in close agreement with pseudo-second order kinetic model. The elution percentage of as high as ～95% could be achieved for AB25 using a suitable eluent.     

The competitive heavy metal removal by hydroxyethyl cellulose-g-poly(acrylic acid) copolymer and its sodium salt: The effect of copper content on the adsorption capacity

Summary Crosslinked hydroxyethyl cellulose-g-poly(acrylic acid) (HEC-g-pAA) graft copolymer was prepared by grafting of acrylic acid (AA) onto hydroxyethyl cellulose (HEC) using [Ce(NH₄)₂(NO₃)₆]/HNO₃ initiator system in the presence of poly(ethyleneglycol diacrylate) (PEGDA) crosslinking agent in 1:1 (v/v) mixture of methanol and water at 30 °C. Carboxyl content of copolymer was determined by neutralization of –COOH groups with NaOH solution and sodium salt of copolymer (HEC-g-pAANa) was swelled in distilled water in order to determine the equilibrium swelling value of copolymer. Both dry HEC-g-pAA and swollen HEC-g-pAANa copolymers were used in the heavy metal ion removal from three different aqueous ion solutions as follows: a binary ion solution with equal molar contents of Pb²⁺and Cd²⁺, a triple ion solution with equal molar contents of Pb²⁺, Cu²⁺ and Cd²⁺, and a triple ion solution with twice Cu²⁺molar contents of Pb²⁺and Cd²⁺. Higher removal values on swollen HEC-g-pAANa were observed in comparison to those on dry polymer. The presence of Cu²⁺decreased the adsorption values for Pb²⁺ and Cd²⁺ ions on both types of HEC copolymer. However, with further increase in Cu²⁺ content both dry and swollen copolymers became apparently selective to Cu²⁺ removal and Cu²⁺ removal values exceeded the sum of adsorption values for Pb²⁺ and Cd²⁺. Maximum metal ion removal capacities were 1.79 and 0.85 mmol Me²⁺/g_polymer on swollen HEC-g-pAANa and dry HEC-g-pAA, respectively.     

Compatibilization effect of graft copolymer on immiscible polymer blends. II. LLDPE/PS/LLDPE-g-PS systems

The compatibilizing effect of graft copolymer, linear low density polyethylene-g-polystyrene (LLDPE-g-PS), on immiscible LLDPE/PS blends has been studied by means of ¹³C CPMAS NMR and DSC techniques. The results indicate that LLDPE-g-PS is an effective compatibilizer for LLDPE/PS blends, and the compatibilizing effect of LLDPE-g-PS on LLDPE/PS blends depends on the PS grafting yield and molecular structure of the compatibilizers and also on the composition of the blends. It was found that LLDPE-g-PS chains connect two immiscible components, LLDPE and PS, through solubilization of chemically identical segments of LLDPE-g-PS into the noncrystalline region of the LLDPE and PS domain, respectively. Mean while, LLDPE-g-PS chains connect the crystalline region of LLDPE by isomorphism, resulting in an obvious change in the crystallization behavior of LLDPE. © 1996 John Wiley & Sons, Inc.     

Removal of Pb2+ and Cd2+ from drinking water using polysaccharide extract isolated from cactus pads (Opuntia ficus indica)

The use of a polysaccharide extract isolated from cactus pads (Opuntia ficus indica) as a low‐cost adsorbent for the removal of Pb²⁺ and Cd²⁺ from water was investigated. The Brunauer?Emmett?Teller study showed that the surface area of the extract powder was approximately 2.373 m²/g. Inductively coupled plasma optical emission spectrometry was used to monitor changes in ion concentrations during the adsorption. The adsorption mechanism was studied as a function of physicochemical variables such as initial metal ion concentration, adsorbent dosage, contact time, and pH of the solution. The results indicated that the adsorption percentage of the two cations increased with contact time, attaining equilibrium at 150 and 120 min for Cd²⁺ and Pb²⁺, respectively. At these optimal times, the adsorption capacity of Pb²⁺ and Cd²⁺ increased with increasing pH. Langmuir, Freundlich, Toth, Dubinin–Radushkevich, Sips, and Redlich–Peterson isotherm models were thereafter applied to understand the adsorption mechanism. The qe plot against C_e for the Toth isotherm model had the best fit with low error values and the highest correlation coefficient (R²) values of 0.9973 and 0.9953 for Pb²⁺ and Cd²⁺, respectively. Therefore, the isotherm study reveals that the adsorption mechanism involved is complex because of the presence of different interactions (such as ionic exchange and coagulation), yielding maximum adsorption capacities of 256 and 151 gm/L for Pb²⁺ and Cd²⁺, respectively. Generally, the polysaccharide extract exhibited higher adsorption capacity of Pb²⁺ than of Cd²⁺ under similar conditions. Besides the removal capacities reported in this study, the adsorbent regeneration and its reusability was also investigated. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43913.     

Removal of Cd2+ ions from aqueous solution using cassava starch–based superabsorbent polymers

A comprehensive feasibility study on the adsorption of Cd²⁺ ions by cassava starch–based superabsorbent polymers (CST‐SAPs) as the biosorbent was investigated as a function of adsorbent dosage, pH, initial concentration, contact time, and temperature. An orthogonal experiment and range analysis were applied to optimize the adsorption conditions. Adsorbent dosage and initial concentration were the most sensitive variables for adsorption capacity. The maximum adsorption value of Cd²⁺ ions was determined as 347.46 mg/g at pH 6.0, initial concentration of 200 mg/L, and contact temperature and time of 323 K and 6 h, respectively, with 0.1 g adsorbent dosage. The equilibrium data were well described by a Langmuir model, and the adsorption process was well fitted by pseudo‐second‐order kinetics. The Fourier transform infrared spectroscopy (FTIR) data confirmed that acrylic acid and acrylic amide grafted onto the cassava starch. The X‐ray diffraction and FTIR results for the Cd²⁺‐absorbed CST‐SAP (CST‐SAP‐Cd²⁺) samples showed that the CST‐SAP could effectively adsorb Cd²⁺ ions and that the characteristic groups were translocated by chelation. The scanning electron microscopy results for the CST‐SAP revealed that the surface of the polymer was rough, and the layered structure that was full of folds caused an enhanced specific surface; such conditions were beneficial to Cd²⁺ ion adsorption. It was concluded that the CST‐SAP was an excellent adsorbent for Cd²⁺ ion removal from aqueous solution. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44758.     

Competitive Adsorption of Ag+, Pb2+, Ni2+, and Cd2+ Ions on Vermiculite

Competitive adsorption of Ag⁺, Pb²⁺, Ni²⁺, and Cd² ions on vermiuculite in a binary, ternary, and quaternary mixture was investigated in batch experiments. The effects of the presence of Ag⁺, Ni²⁺, and Cd²⁺ ions on the adsorption of Pb²⁺ ions were investigated in terms of the equilibrium isotherm. Experimental results indicated that Pb²⁺ ions always favorably adsorbed on vermiculite over Ag⁺, Ni²⁺, and Cd²⁺ ions. The adsorption equilibrium data of Pb²⁺ ions better fitted the Langmuir model than the Freundlich model. The results showed that the pseudo-second-order kinetics model was in good agreement with the experimental results for all metal ions, and the adsorption rate among the metal ions followed Ag⁺ > Pb²⁺ > Ni²⁺ > Cd²⁺. The desorption and regenration study indicated that vermiculite can be used repeatedly and be suitable for the design of a continuous process.     

Functionalized nanostructured silica by tetradentate-amine chelating ligand as efficient heavy metals adsorbent : Applications to industrial effluent treatment

Organofunctionalized nanostructured silica SBA-15 with tri(2-aminoethyl)amine tetradentate-amine ligand was synthesized and applied as adsorbent for the removal of Cu²⁺, Pb²⁺, and Cd²⁺ from both synthetic wastewater and real paper mill and electroplating industrial effluents. The prepared materials were characterized by XRD, N₂ adsorption-desorption, TGA, and FT-IR analysis. The Tren-SBA-15 was found to be a fast adsorbent for heavy metal ions from single solution with affinity for Cu²⁺, Pb²⁺, than for Cd²⁺ due to the complicated impacts of metal ion electronegativity. The kinetic rate constant decreased with increasing metal ion concentration due to increasing of ion repulsion force. The equilibrium batch experimental data is well described by the Langmuir isotherm. The maximum adsorption capacity was 1.85 mmol g^?1 for Cu²⁺, 1.34 mmol g^?1 for Pb²⁺, and 1.08 mmol g^?1 for Cd²⁺ at the optimized adsorption conditions (pH=4, T=323 K, t=2 h, C₀=3 mmol L^?1, and adsorbent dose=1 g L^?1). All Gibbs energy was negative as expected for spontaneous interactions, and the positive entropic values from 103.7 to 138.7 J mol^?1 K^?1 also reinforced this favorable adsorption process in heterogeneous system. Experiment with real wastewaters showed that approximately a half fraction of the total amount of studied metal ions was removed within the first cycle of adsorption. Hence, desorption experiments were performed by 0.3M HCl eluent, and Tren-SBA-15 successfully reused for four adsorption/desorption cycles to complete removal of metal ions from real effluents. The regenerated Tren-SBA-15 displayed almost similar adsorption capacity of Cu²⁺, Pb²⁺, and Cd²⁺ even after four recycles. The results suggest that Tren-SBA-15 is a good candidate as an adsorbent in the removal of Cu²⁺, Pb²⁺, and Cd²⁺ from aqueous solutions.