Mechanical,thermal, and microstructural properties of polypropylene/polyamide‐6/styrene‐ethylene‐butadiene‐styrene polymer alloys

Interfacial agents as compatibilizers have recently been introduced into polymer blends to improve the microstructure and mechanical properties of thermoplastics. In this way, it is possible to prepare a mixture of polymeric materials that can have superior mechanical properties over a wide temperature range. In this study, an incompatible blend of polypropylene (PP) and polyamide‐6 (PA₆) were made compatible by the addition of 10% styrene–ethylene–butadiene–styrene copolymer (SEBS). The mixing operation was conducted by using a twin‐screw extruder. The morphology and the compatibility of the mixtures were examined by SEM and DSC techniques. Furthermore, the elastic modulus, tensile and yield strengths, percentage elongation, hardness, melt flow index, Izod impact resistance, heat deflection temperature (HDT), and Vicat softening point values of polymer alloys of various ratios were determined. It was found that the addition of SEBS to the structures decreased the tensile strength, yield strength, elastic modulus, and hardness, whereas it increased the Izod impact strength and percentage elongation values. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3485–3491, 2003     

Cell‐Permeable β‐Peptide Inhibitors of p53/hDM2 Complexation

Look at what the cat(ionic motif) dragged in! We report a general strategy to increase the cell permeability of β³‐peptides. Introduction of a minimal cationic motif within the folded structure of a high‐affinity β³‐peptide ligand for hDM2 led to molecules with high 3₁₄‐helical structure, high hDM2 affinity and sufficient cell permeability to upregulate p53‐dependent genes in live mammalian cells. Minimally cationic β³‐peptides represent the critical first step towards a class of protease‐resistant peptidomimetics that might modulate intracellular biological pathways.

     

The reaction mechanism of diethyl‐2,3‐dicyano‐2,3‐di(p,m‐dimethoxylphenyl) succinate with styrene

The radical polymerization of styrene (ST) can be initiated by diethyl‐2,3‐dicyano‐2,3‐di(dimethoxyphenyl) succinate (ECPS). The reaction mechanism has been studied by means of UV, H¹‐NMR, product analysis, gel permeation chromatography, electronic spin resonance (ESR), and the conversion of monomer via time. These experimental results indicate that ECPS probably takes the place of complex with ST, and the complex interaction between ECPS and ST can take advantage of the dissociation of the C C bond. The complex interaction and thermal effect are the important factors causing the dissociation of C C bond. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1140–1145, 1999     

Thermal degradation kinetics of thermotropic poly(p‐oxybenzoate‐co‐p,p′‐biphenylene terephthalate) fiber

An advanced heat‐resistant fiber (trade name Ekonol) spun from a nematic liquid crystalline melt of thermotropic wholly aromatic poly(p‐oxybenzoate‐p,p′‐biphenylene terephthalate) has been subjected to a dynamic thermogravimetry in nitrogen and air. The thermostability of the Ekonol fiber has been studied in detail. The thermal degradation kinetics have been analyzed using six calculating methods including five single heating rate methods and one multiple heating rate method. The multiple heating‐rate method gives activation energy (E), order (n), frequency factor (Z) for the thermal degradation of 314 kJ mol⁻¹, 4.1, 7.02 × 10²⁰ min⁻¹ in nitrogen, and 290 kJ mol⁻¹, 3.0, 1.29 × 10¹⁹ min⁻¹ in air, respectively. According to the five single heating rate methods, the average E, n, and Z values for the degradation were 178 kJ mol⁻¹, 2.1, and 1.25 × 10¹⁰ min⁻¹ in nitrogen and 138 kJ mol⁻¹, 1.0, and 6.04 × 10⁷ min⁻¹ in air, respectively. The three kinetic parameters are higher in nitrogen than in air from any of the calculating techniques used. The thermostability of the Ekonol fiber is substantially higher in nitrogen than in air, and the decomposition rate in air is higher because oxidation process is occurring and accelerates thermal degradation. The isothermal weight‐loss results predicted based on the nonisothermal kinetic data are in good agreement with those observed experimentally in the literature. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1923–1931, 1999     

Rheological,thermal, and morphological properties of low‐density polyethylene/ultra‐high‐molecular‐weight polyethylene and linear low‐density polyethylene/ultra‐high‐molecular‐weight polyethylene blends

The dynamic rheological behavior of low‐density polyethylene (LDPE)/ultra‐high‐molecular‐weight polyethylene (UHMWPE) blends and linear low‐density polyethylene (LLDPE)/UHMWPE blends was measured in a parallel‐plate rheometer at 180, 190, and 200°C. Analysis of the log–additivity rule, Cole–Cole plots, Han curves, and Van Gurp curves of the LDPE/UHMWPE blends indicated that the blends were miscible in the melt. In contrast, the rheological properties of LLDPE/UHMWPE showed that the miscibility of the blends was decided by the composition of LLDPE. The differential scanning calorimetry results and scanning electron microscopy photos of the LLDPE/UHMWPE blends were consistent with the rheological properties, whereas with regard to the thermal and morphological properties of LDPE/UHMWPE blends, the results reveal three endothermic peaks and phase separation, which indicated a liquid–solid phase separation in the LDPE/UHMWPE blends. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation,characterization, and polymerization of chromium complexes‐grafted Al/SBA‐15 and Ti/SBA‐15 nanosupports

Ethylene polymerization catalysts have been prepared by grafting chromium (III) nitrate onto Al/SBA‐15 and Ti/SBA‐15 mesoporous materials. A combination of XRD, nitrogen adsorption, TEM, and inductively coupled plasma‐atomic emission spectroscopy (ICP‐AES), were used to characterize the catalysts. Polymerization activity of Cr/SBA‐15 catalyst is significantly improved by Al or Ti insertion to the supports. Particularly, the chromium catalyst prepared with Ti/SBA‐15 support is more active than Al/SBA‐15 catalyst. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

2‐Acylaminopyridin‐4‐ylimidazoles as p38 MAP Kinase Inhibitors: Design,Synthesis, and Biological and Metabolic Evaluations

Targeting cytokines has become an important focus in the treatment of many inflammatory disorders. p38 MAP kinase (MAPK) is the key enzyme in regulating the biosynthesis and release of pro‐inflammatory cytokines such as IL‐1β and TNFα. Inhibition of p38 MAPK results in decreased expression of these cytokines. Tri‐ and tetrasubstituted pyridinylimidazoles are potent inhibitors of p38 MAPK. Substitution on the pyridinyl moiety allows the design of inhibitors that show increased selectivity and activity by targeting the enzyme's hydrophobic region II. The objective of this study was to synthesize novel 1,2,4,5‐tetrasubstituted imidazole derivates and to characterize them not only for their ability to inhibit p38 MAPK and modulate cytokine release in human whole blood, but also to evaluate their metabolic stability. Biological data and metabolic studies demonstrate that the introduction of a 2‐acylamino function at C2 of the pyridine results in highly efficient and metabolically stable inhibitors relative to C2‐alkylamino derivatives. A series of novel candidates was investigated for metabolic stability in human liver microsomes and in human whole blood. Additionally, metabolic S‐oxidation was investigated, and possible metabolites were synthesized.     

Interfacial Modification of Polystyrene‐block‐polybutadiene‐block‐polystyrene/Magnesium Hydroxide Composites, 1

Composites based on polystyrene‐block‐polybutadiene‐block‐polystyrene (SBS triblock thermoplastic elastomer) and magnesium hydroxide (Mg(OH)₂) (5–60 wt.‐%) have been prepared by twin screw extrusion. Interfacial modifiers included dispersants, i.e., isostearic acid, oleic acid, stearic acid; and coupling agents, i.e., maleanised polybutadiene and vinyltriethoxysilane. In each case, approximately one monolayer of treatment was used. A dual bore motor driven extrusion rheometer was used for assessment shear and elongation flow behavior (Cogswell's method) over a shear rate range of 100 s^?1 to 5 000 s^?1. Untreated filler and filler treated with coupling agents gave composites that become increasingly pseudoplastic as filler level increased. Fatty acid structure was shown to have some influence over the level of melt viscosity reduction normally associated with such treatments; stearic acid gave the most pronounced reduction in melt viscosity possibly due to the tightly packed monolayer. Elongational flow properties, determined using Cogswell's method, indicated significant chain extension/branching of the bulk matrix when high levels of untreated filler were present and long range filler‐matrix interaction in composites modified with maleanised polybutadiene.

Elongational viscosity versus extensional stress (obtained by Cogswell's method) for SBS blended with filler surface treatments (□) unfilled matrix, and unfilled matrix plus (?) Hⁱst and (?) MPBD.     

Preparation,characterization, and lithographic applications of glycidyl methacrylate/methacrylic acid/t‐butyl‐4‐vinylphenyl carbonate terpolymers

At present, most negative working lithographic plates use organic solvents as a developing medium. These developers have the obvious disadvantages of toxicity, fire risk, and are more expensive than the aqueous developers. This work describes the synthesis and characterization of materials that have similar photoactive properties to existing materials, but are soluble in water or aqueous medium rather than organic solvents. These materials are terpolymers comprising of one sort of material to induce water solubility, such as methacrylic acid (MAA) and another material to give the photoactive response such as glycidyl methacrylate (GMA). The tertiary‐butyl‐4‐vinyl phenyl carbonate (t‐BOCVP) was added as a chemically amplifying agent. Various terpolymers were prepared via free‐radical solution polymerization, typically in methyl ethyl ketone (MEK). Crosslinking reaction was induced using mixed arylsulphonium hexafluoroantimonate (MAS+ ‐SbF) as a photogenerating acid. It was found that the films of the terpolymer containing 85 mol % of GMA unit with the addition of 5 mol % rather than 2 mol % of the t‐BOCVP in the feed ratio gave good acid resistance and good adhesion to the surface of the zinc plate. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Live‐Cell Studies of p300/CBP Histone Acetyltransferase Activity and Inhibition

Histone acetyltransferase enzymes (HATs) are important therapeutic targets, but there are few cell‐based assays available for evaluating the pharmacodynamics of HAT inhibitors. Here we present the application of a FRET‐based reporter, Histac, in live‐cell studies of p300/CBP HAT inhibition, by both genetic and pharmacologic disruption. shRNA knockdown of p300/CBP led to increased Histac FRET, thus suggesting a role for p300/CBP in the acetylation of the histone H4 tail. Additionally, we describe a new p300/CBP HAT inhibitor, C107, and show that it can also increase cellular Histac FRET. Taken together, these studies provide a live‐cell strategy for identifying and evaluating p300/CBP inhibitors.     

Physical aging of poly(diethylene glycol‐p,p′bibenzoate)

The structure of a quenched sample of a liquid crystalline polyester, poly(diethylene glycol‐p,p′‐bibenzoate) (PDEB), and its physical aging was studied by microhardness methods (MH), wide‐angle X‐ray scattering (WAXS), and positron annihilation lifetime spectroscopy (PALS). It was established that the smectic layers in the liquid crystalline domain are oriented parallel to the sample plane. Physical aging leads to an increase of either the Vickers microhardness, directly related to the elastic modulus of the material, or the total microhardness, which includes all the components of the overall deformation. These mechanical changes are due to a decrease in the sizes of nanopores and the consequential increase of the density of the disordered phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2363–2368, 2002     

Gasoline permeation behavior and mechanical properties of polyamide 6/nanoclay,polyamide 6/PE‐g‐maleic anhydride blend,and polyamide 6/PE‐g‐maleic anhydride/clay nanocomposite

In this article, polyamide 6 (PA6)/clay nanocomposites, PA6/polyethylene grafted maleic anhydride (PE‐g‐MA) blends, and PA6/PE‐g‐MA/clay nanocomposites were prepared and their gasoline permeation behavior and some mechanical properties were investigated. In PA6/clay nanocomposites, cloisite 30B was used as nanoparticles, with weight percentages of 1, 3, and 5. The blends of PA6/PE‐g‐MA were prepared with PE‐g‐MA weight percents of 10, 20, and 30. All samples were prepared via melt mixing technique using a twin screw extruder. The results showed that the lowest gasoline permeation occurred when using 3 wt % of nanoclay in PA6/clay nanocomposites, and 10 wt % of PE‐g‐MA in PA6/PE‐g‐MA blends. Therefore, a sample of PA6/PE‐g‐MA/clay nanocomposite containing 3 wt % of nanoclay and 10 wt % of PE‐g‐MA was prepared and its gasoline permeation behavior was investigated. The results showed that the permeation amount of PA6/PE‐g‐MA/nanoclay was 0.41 g m^?2 day^?1, while this value was 0.46 g m^?2 day^?1 for both of PA6/3wt % clay nanocomposite and PA6/10 wt % PE‐g‐MA blend. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40150.     

Synthesis of EP‐POSS mixture and the properties of EP‐POSS/epoxy,SiO2/epoxy,and SiO2/EP‐POSS/epoxy nanocomposite

The hybrid material of EP‐POSS mixture was synthesized by the hydrolysis and condensation of (γ‐glycidoxypropyl) trimethoxysilane. A series of binary systems of EP‐POSS/epoxy blends, epoxy resin modified by silica nanoparticles (SiO₂/epoxy), and ternary system of SiO₂/EP‐POSS/epoxy nanocomposite were prepared. The dispersion of SiO₂ in the matrices was evidenced by transmission electron micrograph, and the mechanical properties, that is, flexural strength, flexural modulus, and impact strength were examined for EP‐POSS/epoxy blends, SiO₂/epoxy, and SiO₂/EP‐POSS/epoxy, respectively. The fractured surface of the impact samples was observed by scanning electron micrograph. Thermogravimetry analysis were applied to investigate the different thermal stabilities of the binary system and ternary system by introducing EP‐POSS and SiO₂ to epoxy resin. The results showed that the impact strength, flexural strength, and modulus of the SiO₂/EP‐POSS/epoxy system increased around by 57.9, 14.1, and 44.0% compared with the pure epoxy resin, T_i, T_max and the residues of the ternary system were 387°C, 426°C, and 25.2%, increased remarkably by 20°C, 11°C and 101.6% in contrast to the pure epoxy resin, which was also higher than the binary systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 810‐819, 2013     

Mechanical properties,flame retardancy,hot‐air ageing,and hot‐oil ageing resistance of ethylene‐vinyl acetate rubber/hydrogenated nitrile‐butadiene rubber/magnesium hydroxide composites

The mechanical properties, flame retardancy, hot‐air ageing, and hot‐oil ageing resistance of ethylene‐vinyl acetate rubber (EVM)/hydrogenated nitrile‐butadiene rubber (HNBR)/magnesium hydroxide (MH) composites were studied. With increasing HNBR fraction, elongation at break and tear strength of the EVM/HNBR/MH composites increased, whereas the limited oxygen index and Shore A hardness decreased slightly. Hot‐air ageing resistance and hot‐oil ageing resistance of the composites became better with increasing HNBR fraction. Thermal gravimetric analysis results demonstrated that the presence of MH and low HNBR fraction could improve the thermal stability of the composites. Differential scanning calorimeter revealed that the glass transition temperature (T_g) of the composites shifted toward low temperatures with increasing HNBR fraction, which was also confirmed by dynamic mechanical thermal analysis. Atomic force microscope images showed MH has a small particle size and good dispersion in the composites with high HNBR fraction. The flame retardancy, extremely good hot‐oil ageing, and hot‐air ageing resistance combined with good mechanical properties performance in a wide temperature range (?30°C to 150°C) make the EVM/HNBR/MH composites ideal for cables application. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Acid‐dye‐dyeable polyacrylonitrile/ poly(N,N‐dilkylaminoethylacrylate) acrylic blend fiber

An acid‐dye‐dyeable polyacrylonitrile/poly (N,N‐dilkylaminoethylacrylate) blend fiber was prepared. On the basis of research for the dye uptake, color strength, tensile strength, and breaking elongation of the polyacrylonitrile/poly (N,N‐dilkylaminoethylacrylate) blend fiber, it was found that the blend fiber and its fabrics for acid dyes possessed favorable dyeability and mechanical properties. The effect of the polyacrylonitrile ratio on the blend fiber was examined. The optimum dyeing‐process parameters were determined. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Melting behavior,nonisothermal crystallization kinetics,and morphology of PP/nylon 11/EPDM‐g‐MAH blends

The melting behavior, nonisothermal crystallization behavior, and morphology of pure polypropylene (PP) and its blends were investigated by differential scanning calorimetry and polarized optical microscopy. The nonisothermal crystallization kinetics was analyzed using the Avrami equation modified by Jeziorny and the equation combining the Avrami and Ozawa method. The surface fold free energy and the effective activation energy for both PP and its blends were obtained by Hoffman‐Lauritzen theory and Vyazovkin's approach, respectively. The results showed that the presence of nylon 11 hindered the mobility of PP chains but accelerated the overall crystallization rate. The POM observation confirmed that the addition of nylon 11 decreased the spherulites size of PP matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

End‐Grained Wood/Polyurethane Composites, 3 – Isocyanate‐Free Route

End‐grained wood/polyurethane composites were obtained by a water‐based one‐pot process free of diisocyanates. Wood was impregnated with both PEG and CBC‐functionalized PEG as a coupling agent. A thorough study of the CBC‐mediated end‐groups conversion of PEG was achieved. It came out that functionalization conditions strongly affected the polyurethane chain extension and its grafting onto the wood structure. Antiswelling efficiency measurements showed that the one‐pot procedure allowed to reach comparable dimensional stabilization than the diisocyanate‐based process previously described. Morphological analysis demonstrated that such an improvement was attributable to the formation of cell wall‐bulked WPCs.

     

Morphology,crystallization, and thermal behavior of isotactic polypropylene/propylene‐g‐styrene blends

Optical microscopy, differential scanning calorimetry, and small angle X‐ray scattering techniques were used to study the influence of the crystallization conditions on morphology and thermal behavior of samples of binary blends constituted of isotactic polypropylene (iPP) and a novel graft copolymer of unsaturated propylene with styrene (uPP‐g‐PS) isothermally crystallized from melt, at relatively low undercooling, in a range of crystallization temperatures of the iPP phase. It was shown that, irrespective of composition, no fall in the crystallinity index of the iPP phase was observed. Notwithstanding, spherulitic texture and thermal behavior of the iPP phase in the iPP/uPP‐g‐PS materials were strongly modified by the presence of copolymer. Surprisingly, iPP spherulites crystallized from the blends showed size and regularity higher than that exhibited by plain iPP spherulites. Moreover, the amount of amorphous material located in the interspherulitic amorphous regions decreased with increasing crystallization temperature, and for a given crystallization temperature, with increasing uPP‐g‐PS content. Also, relevant thermodynamic parameters, related to the crystallization process of the iPP phase from iPP/uPP‐g‐PS melts, were found, composition dependent. The equilibrium melting temperature and the surface free energy of folding of the iPP lamellar crystals grown in the presence of uPP‐g‐PS content up to 5% (wt/wt) were, in fact, respectively slightly lower and higher than that found for the lamellar crystals of plain iPP. By further increase of the copolymer content, both the equilibrium melting temperature and surface free energy of folding values were, on the contrary, depressed dramatically. The obtained results were accounted for by assuming that the iPP crystallization process from iPP/uPP‐g‐PS melts could occur through molecular fractionation inducing a combination of morphological and thermodynamic effects. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2286–2298, 2001     

Environmentally sensitive hydrogels: N‐isopropyl acrylamide/Acrylamide/ Mono‐, Di‐, Tricarboxylic acid crosslinked polymers

Environmentally sensitive hydrogels responsive to various stimuli such as temperature, pH, ionic strength of the medium and the solvent were prepared by using N‐isopropyl acrylamide (NIPAM), acrylamide (AAm) and monomers that have various number of carboxylic acid (XA) functionality using N,N′‐methylene bisacrylamide (Bis) as crosslinker. Hydrogels were prepared via free radical polymerization reaction in aqueous solution. P(NIPAAm‐co‐AAm) and p(NIPAAm‐co‐AAm)/XA hydrogels that contain monoprotic crotonic acid (CA) exhibit a lover critical solution temperature (LCST) at 28°C, whereas p(NIPAAm‐co‐AAm)/IA (IA:itaconic acid), and P(NIPAAm‐co‐AAm)/ACA (ACA:acotonic acid) hydrogels exhibit a lover critical solution temperature at 30.7°C and 34.4°C, respectively. Spectroscopic and thermal analyses were performed for the structural and thermal characterizations of the prepared hydrogel. The swelling experiments as equilibrium swelling percentages by gravimetrically were carried out in different solvents, at different solutions temperature, pH, and ionic strengths to determine their effects on swelling characteristic of hydrogels. POLYM. ENG. SCI., 55:843–851, 2015. © 2014 Society of Plastics Engineers