Biophysical Features of Bacillithiol,the Glutathione Surrogate of Bacillus subtilis and other Firmicutes

Bacillithiol (BSH) is the major low‐molecular‐weight (LMW) thiol in many low‐G+C Gram‐positive bacteria (Firmicutes). Evidence now emerging suggests that BSH functions as an important LMW thiol in redox regulation and xenobiotic detoxification, analogous to what is already known for glutathione and mycothiol in other microorganisms. The biophysical properties and cellular concentrations of such LMW thiols are important determinants of their biochemical efficiency both as biochemical nucleophiles and as redox buffers. Here, BSH has been characterised and compared with other LMW thiols in terms of its thiol pK_a, redox potential and thiol–disulfide exchange reactivity. Both the thiol pK_a and the standard thiol redox potential of BSH are shown to be significantly lower than those of glutathione whereas the reactivities of the two compounds in thiol–disulfide reactions are comparable. The cellular concentration of BSH in Bacillus subtilis varied over different growth phases and reached up to 5 mM , which is significantly greater than previously observed from single measurements taken during mid‐exponential growth. These results demonstrate that the biophysical characteristics of BSH are distinctively different from those of GSH and that its cellular concentrations can reach levels much higher than previously reported.     

Synthesis of novel thermo‐ and redox‐sensitive polypeptide hydrogels

Multi‐responsive hydrogels have recently received considerable attention for bioapplications. Here, novel temperature‐ and redox‐responsive polypetide hydrogels have been developed. Thermo‐sensitive hydrogels based on poly(ethyleneglycol)‐block ‐poly(γ‐propargyl‐l ‐glutamate) (PEG‐PPLG ) were first synthesized by the ring opening polymerization of γ‐propargyl‐l ‐glutamate N ‐carboxyanhydride (PLG‐NCA ) with amino group terminated PEG monomethyl ether (mPEG‐NH₂ ) as macroinitiator and were then functionalized via the ‘thiol‐yne’ click reaction between the propargyl pendents and the thiol‐containing 1‐propanethiol. The sol ? gel phase transition of the obtained copolymer aqueous solution in response to temperature change was studied. The mass loss of the hydrogel in vitro was accelerated in the presence of H₂O₂ , exhibiting a redox‐responsive property. Further, the methyl thiazolyl tetrazolium viability results revealed that this polypetide hydrogel has excellent biocompatibility, presenting potential applications in the biomedical field. © 2016 Society of Chemical Industry     

Highly Regio‐ and Stereoselective Iodohydroxylation of 1,2‐Allenylic Sulfoxides in the Presence of Benzyl Thiol

The iodohydroxylation of 1,2‐allenyl sulfoxides with iodine in the presence of benzyl thiol afforded 3‐hydroxy‐2‐iodo‐2(E)‐alkenyl sulfides in good yields and high regio‐ and stereoselectivities. In this reaction it was observed that the sulfoxide functionality was reduced to sulfide and the water in the reaction mixture plays an important role for the stereoselectivity observed. A mechanism involving the attack of benzyl thiol at the positively charged sulfur atom in the five‐membered intermediate 2 has been proposed.     

Curing kinetics of a “green” thiol‐containing resin: Oligo(ethylene‐2‐mercaptosuccinate)

This work focuses on examining the curing process of neat oligo(ethylene‐2‐mercaptosuccinate) using differential scanning calorimetry (DSC), rheology, and Fourier transform infrared (FTIR) spectroscopy. The thiol‐containing resin offers much promise as a bioabsorbable polymer in medical field and as a reusable thermoset in sustainable applications. Although curing between thiol groups has been investigated in solutions, studies of neat materials without solvent are rare. Here, the evolution of glass transition temperature (T_g), complex shear modulus (G*), gelation, and chemical structure are monitored as a function of isothermal curing time and temperature. Both T_g and G* increase with curing, indicating the formation of polymer networks. The conversion of the cure is determined from the DiBenedetto equation and is found to follow a second‐order plus second‐order autocatalytic reaction model. Importantly, the intensity of the S–H bond absorption decreases with the extent of curing, which confirms the curing mechanism, i.e., disulfide formation between the thiol groups. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43205.     

Enthalpy relaxation of photopolymerized multilayered thiol‐ene films

Multilayered thiol‐ene network films with two and three different components were fabricated by spin coating and photopolymerization. The distinctive glass transition temperatures of each layer component were observed at corresponding glass transition regions of each bulk sample. Sub‐T_g aging of 10‐, 21‐, and 32‐layered thiol‐ene films was investigated in terms of enthalpy relaxation. Enthalpy relaxation of each layer component occurred independently and presented the characteristic time and temperature dependency. Overlapped unsymmetrical bell‐shaped enthalpy relaxation distribution having peak maximum at T_g‐10°C of each layer component was observed, resulting in broad distribution of enthalpy relaxation over wide temperature range. In addition, enthalpy relaxation of each layer component in the multilayered thiol‐ene films was significantly accelerated comparing to that of bulk thiol‐ene samples. Dynamic mechanical thermal properties of multilayered thiol‐ene films also showed two and three separated glass transition temperature. However, for 32‐layered thiol‐ene film consisting of three different layer components, glass transition and damping region are overlapped and the width is extended more than 100°C. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A Single‐Electrode,Dual‐Potential Ferrocene–PNA Biosensor for the Detection of DNA

A Fc–PNA biosensor (Fc: ferrocenyl, C₁₀H₉Fe) was designed by using two electrochemically distinguishable recognition elements with different molecular information at a single electrode. Two Fc–PNA capture probes were therefore synthesized by N‐terminal labeling different dodecamer PNA sequences with different ferrocene derivatives by click chemistry. Each of the two strands was thereby tethered with one specific ferrocene derivative. The two capture probes revealed quasi‐reversible redox processes of the Fc^0/+ redox couple with a significant difference in their electrochemical half‐wave potentials of ΔE_1/2=160 mV. A carefully designed biosensor interface, consisting of a ternary self‐assembled monolayer (SAM) of the two C‐terminal cysteine‐tethered Fc–PNA capture probes and 6‐mercaptohexanol, was electrochemically investigated by square wave (SWV) and cyclic voltammetry (CV). The biosensor properties of this interface were analyzed by studying the interaction with DNA sequences that were complementary to either of the two capture probes by SWV. Based on distinct changes in both peak current and potential, a parallel identification of these two DNA sequences was successful with one interface design. Moreover, the primary electrochemical response could be converted by a simple mathematical analysis into a clear‐cut electrochemical signal about the hybridization event. The discrimination of single‐nucleotide polymorphism (SNP) was proven with a chosen single‐mismatch DNA sequence. Furthermore, experiments with crude bacterial RNA confirm the principal suitability of this dual‐potential sensor under real‐life conditions.     

Preparation of All Polyester‐Based Semi‐IPN Elastomers Containing Self‐Associative or Non‐Associative Guest Chains via Post‐Blending Cross‐Linking

Mechanical properties of semi‐interpenetrating polymer network (semi‐IPN) elastomers consisting of chemical networks and self‐associative/non‐associative guest chains are demonstrated. Amorphous low T_g polyesters with thiol side groups (PE‐SH) are first synthesized by melt polycondensation. PE‐SH are then converted to polyesters containing COOH side groups (PE‐COOH) and amide side groups (PE‐amide) through Michael addition reaction of thiol groups with acrylic acid and acrylamide, respectively. Homogeneous semi‐IPN elastomers are obtained by thermal cross‐linking for bulk mixtures of PE‐COOH and PE‐amide in the presence of diepoxy cross‐linkers, where COOH and epoxy groups are reacted to form chemical cross‐links while the amide units form self‐complementary hydrogen bonds. Another sample containing non‐associative chains is also prepared by using polyester with N,N‐dimethylamide units, instead of PE‐amide. Dynamic mechanical analysis reveals that guest chain incorporation systematically brings plateau modulus reduction and a unique relaxation with higher tan δ value depending on the fraction and nature of guest chains. Tensile properties are also affected by the fraction and nature of guest chains; the incorporation of hydrogen bonded chains are beneficial to enhance breaking elongation and toughness without the sacrifice of maximum stress. The knowledge found in this work will be thus beneficial for creating tough soft materials with damping applications.     

Influence of mediator immobilization on the electrochemically assisted microbial dechlorination of trichloroethene (TCE) and cis‐dichloroethene (cis‐DCE)

BACKGROUND: A bioelectrochemical process for trichloroethene (TCE) dechlorination was developed. In this new process, a solid‐state electrode polarized to ?450 mV versus the standard hydrogen electrode (SHE), in combination with a redox mediator (i.e., methyl viologen, MV) is employed as an electron donor for the microbial reductive dechlorination of TCE. In this study we compared the performance of the process with the redox mediator immobilized at the surface of electrodes or dissolved in the bulk liquid, using both a culture highly enriched in Desulfitobacterium spp., capable of dechlorinating TCE to cis‐dichloroethene (cis‐DCE), and a culture highly enriched in Dehalococcoides spp. capable of dechlorinating cis‐DCE to ethene. RESULTS: Short‐term potentiostatic (?450 mV versus SHE) experiments showed that TCE or cis‐DCE was dechlorinated both in the presence of soluble (500 µmol L^?1) and immobilized MV. However, TCE or cis‐DCE dechlorination rates with MV‐modified electrodes were remarkably lower than with soluble MV. Both cultures produced significant amounts of H₂ in the presence of electrically reduced, soluble MV, whereas no H₂ was produced when the mediator was immobilized at the electrode surface, regardless of the potential applied to the electrode, in the range ?425 to ?500 mV versus SHE. CONCLUSIONS: The process, operated with modified electrodes, supports the microbial dechlorination of TCE to ethene. Immobilization not only allows retention of the mediator within the system, but also increases process efficiency by preventing bioelectrochemical H₂ formation. On the other hand, strategies to increase dechlorination rates with modified electrodes need to be developed. Copyright © 2009 Society of Chemical Industry     

PEGylated hollow pH‐responsive polymeric nanocapsules for controlled drug delivery

Novel pH‐responsive PEGylated hollow nanocapsules (HNCaps) were fabricated through a combination of distillation–precipitation copolymerization and surface thiol–ene ‘click’ grafting reaction. For this purpose, SiO₂ nanoparticles were synthesized using the Stöber approach, and then modified using 3‐(trimethoxysilyl)propyl methacrylate (MPS). Afterward, a mixture of triethyleneglycol dimethacrylate (as crosslinker), acrylic acid (AA; as pH‐responsive monomer) and MPS‐modified SiO₂ nanoparticles (as sacrificial template) was copolymerized using the distillation–precipitation approach to afford SiO₂@PAA core–shell nanoparticles. The SiO₂ core was etched from SiO₂@PAA using HF solution, and the obtained PAA HNCaps were grafted with a thiol‐end‐capped poly(ethylene glycol) (PEG) through a thiol–ene ‘click’ reaction to produce PAA‐g‐PEG HNCaps. The fabricated HNCaps were loaded with doxorubicin hydrochloride (DOX) as a model anticancer drug, and their drug loading and encapsulation efficiencies as well as pH‐dependent drug release behavior were investigated. The anticancer activity of the drug‐loaded HNCaps was extensively evaluated using MTT assay against human breast cancer cells (MCF7). The cytotoxicity assay results as well as superior physicochemical and biological features of the fabricated HNCaps mean that the developed DOX‐loaded HNCaps have excellent potential for cancer chemotherapy. © 2020 Society of Chemical Industry     

A thiol‐ene clickable hyperbranched polyester via a simple single‐step melt trans‐esterification process

Self‐condensation of AB₂ type monomers (containing one A‐type and two B‐type functional groups) generates hyperbranched (HB) polymers that carry numerous B ‐type end‐groups at their molecular periphery; thus, development of synthetic methods that directly provide quantitatively transformable peripheral B groups would be of immense value as this would provide easy access to multiply functionalized HB systems. A readily accessible AB₂ monomer, namely diallyl, 5‐(4‐hydroxybutoxy)isophthalate was synthesized, which on polymerization under standard melt‐transesterfication conditions yielded a peripherally clickable HB polyester in a single step; the allyl groups were quantitatively reacted with a variety of thiols using the facile photoinitiated “thiol‐ene” reaction to generate a wide range of derivatives, with varying solubility and thermal properties. Furthermore, it is shown that the peripheral allyl double bonds can also be readily epoxidized using meta‐chloroperoxybenzoic acid to yield interesting HB systems, which could potentially serve as a multifunctional cross‐linking agent in epoxy formulations. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40248.     

Preparation of epoxy‐ended hyperbranched polymers with precisely controllable degree of branching by thiol‐ene Michael addition

Epoxy‐ended hyperbranched polymers (EHPs) have a wide range of applications due to their outstanding performances. Because their microstructures are not positively identified, it is very difficult to ascertain the reinforcing and toughening mechanisms of EHPs and their interface interaction with other matrixes. Controllable synthesis of EHPs with precise degree of branching (DB) remains to be a major challenge. Here, a method for preparing novel nitrogen‐phosphor skeleton epoxy‐ended hyperbranched polymers (NPEHP) with controllable DB by a thiol‐ene Michael addition between thiol‐ended hyperbranched polymers (NPHSH) and glycidyl methacrylate have been firstly reported. NPHSH is synthesized by an esterification between hydroxyl‐ended hyperbranched polymers (NPHOH) and 3‐mercaptopropionic acid. NPHOH is prepared by a thiol‐ene Michael addition between methacrylate group of a monomer and thiol group of linear monomer (AB) and/or branched monomer (AB₂). The molar ratio between the AB and AB₂ monomers controls the DB of the products. The ¹H NMR spectra analysis of NPHOH shows that their experimentally determined DBs are very close to their theoretical values, indicating good controllability of their DBs. The narrow molecular weight distributions of NPHOH, NPHSH, and NPEHP suggest high efficiency of the thiol‐ene Michael addition. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44277.     

Lignin peroxidase‐catalyzed polymerization and detoxification of toxic halogenated phenols

Halogenated phenols and bisphenols are recognized as being recalcitrant in conventional biological treatments. The current research evaluated lignin peroxidase‐catalyzed oxidation and polymerization as a potential alternative for their detoxification. Gel permeation–HPLC analysis demonstrated the formation of dimers, trimers and tetramers upon oxidation of the target substrates. Polymerization was accompanied by effective detoxification of the aqueous phase during oxidation of 2,4‐dibromophenol, the extent of which correlated with the extent of oxidation and polymerization. Steady state kinetic measurements at a saturating concentration of H₂O₂ revealed high K_m values (270–1100 µmol dm^?3) for the target substrates, reflecting the strong electron‐withdrawing properties of halogen substituents, which increase the oxidation potential of the phenols, resulting in thermodynamically less favorable reactions. However, k_cat values were not dissimilar from non‐halogenated phenols and the rapid oxidation and polymerization suggests that low retention times could be expected in a continuous process for their treatment, in contrast to conventional biological methods. The operational stability of lignin peroxidase was significantly improved by inclusion of redox mediators, which resulted in enhanced oxidation and more rapid reaction rates. However, due to their inherent toxicity, the use of redox mediators impeded toxicity assays. The findings highlight the potential of lignin peroxidase as a possible alternative for the high‐rate treatment of industrial wastewater when conventional methods are ineffective. Copyright © 2003 Society of Chemical Industry     

Electrochemical and mARC‐Catalyzed Enzymatic Reduction of para‐Substituted Benzamidoximes: Consequences for the Prodrug Concept “Amidoximes instead of Amidines”

The mitochondrial amidoxime reducing component (mARC) activates amidoxime prodrugs by reduction to the corresponding amidine drugs. This study analyzes relationships between the chemical structure of the prodrug and its metabolic activation and compares its enzyme‐mediated vs. electrochemical reduction. The enzyme kinetic parameters K_M and V_max for the N‐reduction of ten para‐substituted derivatives of the model compound benzamidoxime were determined by incubation with recombinant proteins and subcellular fractions from pig liver followed by quantification of the metabolites by HPLC. A clear influence of the substituents at position 4 on the chemical properties of the amidoxime function was confirmed by correlation analyses of ¹H NMR chemical shifts and the redox potentials of the 4‐substituted benzamidoximes with Hammett’s σ. However, no clear relationship between the kinetic parameters for the enzymatic reduction and Hammett’s σ or the lipophilicity could be found. It is thus concluded that these properties as well as the redox potential of the amidoxime can be largely ignored during the development of new amidoxime prodrugs, at least regarding prodrug activation.     

Gadolinium‐conjugated FA‐PEG‐PAMAM‐COOH nanoparticles as potential tumor‐targeted circulation‐prolonged macromolecular MRI contrast agents

The aim of research is to develop potential tumor‐targeted circulation‐prolonged macromolecular magnetic resonance imaging (MRI) contrast agents without the use of low molecular gadolinium (Gd) ligands. The contrast agents were based on polymer–metal complex nanoparticles with controllable particle size to achieve the active and passive tumor‐targeted potential. In particular, poly (amidoamine) (PAMAM) dendrimer with 32 carboxylic groups was modified with folate‐conjugated poly (ethyleneglycol) amine (FA‐PEG‐NH₂, M_w: 2 k and 4 kDa). FA‐PEG‐PAMAM‐Gd macromolecular MRI contrast agents were prepared by the complex reaction between the carboxylic groups in PAMAM and GdCl₃. The structure of FA‐PEG‐PAMAM‐COOH was confirmed by nuclear magnetic resonance (¹H‐NMR), Fourier transform infrared (FTIR) spectra, and electrospray ionization mass spectra (ESI‐MS). The mass percentage content of Gd (III) in FA‐PEG‐PAMAM‐Gd was measured by inductively coupled plasma‐atomic emission spectrometer (ICP‐AES). The sizes of these nanoparticles were about 70 nm measured by transmission electron microscopy, suggestion of their passive targeting potential to tumor tissue. In comparison with clinically available small molecular Gadopentetate dimeglumine, FA‐PEG‐PAMAM‐Gd showed comparable cytotoxicity and higher relaxation rate, suggestion of their great potential as tumor‐targeted nanosized macromolecular MRI contrast agents due to the overexpressed FA receptor in human tumor cell surfaces. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of polydimethylaminoethyl methacrylate grafted attapulgite via ceric ion‐induced redox polymerization

Hybrid nanocomposites consisting of polydimethylaminoethyl methacrylate (PDMAEMA) and attapulgite (ATP) were prepared by using a surface thiol‐Ce (IV) redox initiation system via graft from approach. Initially, ATP was chemically modified with γ‐mercaptopropyltrimethoxysilane (MTS) to anchor thiol groups on the surface (ATP‐MTS). Subsequently, surface‐initiated polymerization of dimethylaminoethyl methacrylate was performed by using ATP‐MTS and cerium (IV) ammonium nitrate (CAN) in aqueous nitric acid (HNO₃) to afford hybrid particles (ATP‐g‐PDMAEMA). Evidence of grafting of PDMAEMA was confirmed by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), and Thermogravimetric Analysis (TGA). The crystal structure of PDMAEMA grafted ATP was characterized by X‐ray diffraction (XRD) analysis. Morphology of ATP‐g‐PDMAEMA was observed by transmission electron microscopy (TEM). The effects of concentration of Ce (IV), HNO₃, and reaction temperature were examined by determining the percentage of grafting (PG). With other condition kept constant, the optimum conditions were obtained as follows: the reaction temperature was 50°C, Ce (IV) and HNO₃ concentrations were 12.5 mmol/L and 1 mol/L, respectively, when 0.2 g of ATP‐MTS, 1 mL of DMAEMA, and 4 mL of aqueous solution were used. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42762.     

“One‐pot” synthesis of well‐defined functional copolymer and its application as tumor‐targeting nanocarrier in drug delivery

A one‐pot synthesis is developed for PEG₆₀₀‐b‐poly(glycerol monoacrylate) (PEG₆₀₀‐b‐PGA), by which folate and superparamagnetic iron oxide nanoparticles (SPIONs) are assembled to form folic acid‐conjugated magnetic nanoparticles (FA‐MNPs) as a tumor targeting system. The synthesis consists of a “click” reaction and atom transfer radical polymerization (ATRP) to obtain the well‐defined furan‐protected maleimido‐terminated PEG₆₀₀‐b‐poly(solketal acrylate) (PEG₆₀₀‐b‐PSA) copolymer. After deprotection, the key copolymer N‐maleimido‐terminated PEG₆₀₀‐b‐PGA is successfully conjugated with thiol derivatives of folate and FITC, respectively. FA‐MNPs are developed by assembling of the resulting polymer FA‐PEG₆₀₀‐b‐PGA with SPIONs, and characterized for their size, surface charge, and superparamagnetic properties. To investigate the cellular uptake of the nanoparticles by Hela cells and φ2 cells using fluoresce technique, FA‐FITC‐MNPs are also obtained by assembling of FA‐PEG₆₀₀‐b‐PGA, FITC‐PEG₆₀₀‐b‐PGA with SPIONs. Qualitative and quantitative determinations of FA‐FITC‐MNPs show that the particles specifically internalized to Hela cells. No significant cytotoxicity is observed for these two kinds of cell lines. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40405.     

Thiol‐ene photofunctionalization of 1,4‐polymyrcene

1,4‐Polymyrcene was synthesized by anionic polymerization of β‐myrcene and was subjected to photochemical functionalization with various thiols (i.e. methyl thioglycolate, methyl 3‐mercaptopropionate, butyl 3‐mercaptopropionate, ethyl 2‐mercaptopropionate and 2‐methyl‐2‐propanethiol) using benzophenone/UV light as the radical source. The yield of thiol addition to the trisubstituted double bonds of 1,4‐polymyrcene decreased in the order 1° thiol (ca 95%) > 2° thiol (ca 80%) > 3° thiol (<5%), due to the reversibility of the thiol‐ene reaction. Remarkably, thiol addition to the side‐chain double bonds was 8 ? 10 times (1° thiol) or 24 times (2° thiol) faster than to the main‐chain double bonds, which can be explained by the different accessibility of the double bonds and steric hindrance. Despite the use of a 10‐fold excess of thiol with respect to myrcene units, the thiol‐ene addition was accompanied by chain coupling reactions, which in the extreme case of 3° thiol (or in the absence of thiol) resulted in the formation of insoluble crosslinked material. As an example, a methyl‐thioglycolate‐functionalized 1,4‐polymyrcene was saponified/crosslinked to give submicron polyelectrolyte particles in dilute alkaline solution. © 2018 Society of Chemical Industry     

Bifunctional poly(ethylene glycol) based crosslinked network polymers as electrolytes for all‐solid‐state lithium ion batteries

Polymer electrolyte based lithium ion batteries represent a revolution in the battery community due to their intrinsic enhanced safety, and as a result polymer electrolytes have been proposed as a replacement for conventional liquid electrolytes. Herein, the preparation of a family of crosslinked network polymers as electrolytes via the ‘click‐chemistry’ technique involving thiol‐ene or thiol‐epoxy is reported. These network polymer electrolytes comprise bifunctional poly(ethylene glycol) as the lithium ion solvating polymer, pentaerythritol tetrakis (3‐mercaptopropionate) as the crosslinker and lithium bis(trifluoromethane)sulfonimide as the lithium salt. The crosslinked network polymer electrolytes obtained show low T_g, high ionic conductivity and a good lithium ion transference number (ca 0.56). In addition, the membrane demonstrated sterling mechanical robustness and high thermal stability. The advantages of the network polymer electrolytes in this study are their harmonious characteristics as solid electrolytes and the potential adaptability to improve performance by combining with inorganic fillers, ionic liquids or other materials. In addition, the simple formation of the network structures without high temperatures or light irradiation has enabled the practical large‐area fabrication and in situ fabrication on cathode electrodes. As a preliminary study, the prepared crosslinked network polymer materials were used as solid electrolytes in the elaboration of all‐solid‐state lithium metal battery prototypes with moderate charge–discharge profiles at different current densities leaving a good platform for further improvement. © 2018 Society of Chemical Industry     

Chiral Scandium‐Catalysed Enantioselective Ring‐Opening of meso‐Epoxides with N‐Heterocycle,Alcohol and Thiol Derivatives in Water

In the presence of catalytic amounts of Sc(OSO₃C₁₂H₂₅)₃ and a chiral bipyridine ligand, asymmetric ring‐opening of meso‐epoxides with aromatic N‐heterocycles, an alcohol and thiols proceeded smoothly to afford the corresponding products in moderate to good yields (34–85 %) with high to excellent enantioselectivities (74–96 % ee). Water was used as the sole and essential solvent in these important enantioselective transformations.     

Synthesis and thiol–ene photopolymerization of (meth)allyl‐terminated polysulfides

Thiol‐terminated polysulfides (PS) are cured by mixing with an oxidant, resulting in limited shelf‐ and/or pot‐life, depending on whether formulated as a one‐ or two‐component system. Mixtures of thiol‐ and alkene‐terminated polysulfides offer the potential for an on‐demand curing process through thiol–ene photopolymerization. Thiol end groups of commercial polysulfides, PS‐1 (1000 g/mol) and PS‐2 (3000 g/mol), were converted to alkene by reaction with (meth)allyl bromide. Photopolymerizations were performed by irradiating films of equimolar thiol:ene mixtures at 320–500 nm (30 mW/cm²) in the presence of 5 wt % 2,2‐dimethoxy‐2‐phenyl‐acetophenone (DMPA). Reaction kinetics were measured using real‐time FTIR by monitoring absorbances at 3075 cm^?1 (alkene) or 2550 cm^?1 (thiol). In the absence of any reactive diluent, mixtures of thiol and alkene polysulfides failed to gel notwithstanding high reaction conversion (>90%). Partial or total replacement of the thiol polysulfide component with pentaerythritol tetrakis(3‐mercaptopropionate) (PETMP) yielded solid elastomeric films and ultimate reaction conversions of 80–96% after 5 min irradiation. Crosshatch adhesion measured on glass, aluminum, and steel was very poor (0B) for (meth)allyl PS‐1/PETMP and poor (2B) for (meth)allyl PS‐2/PETMP without adhesion promoters. (3‐Mercaptopropyl)trimethoxysilane (1 wt %) significantly improved adhesion of (meth)allyl PS‐2/PETMP on all substrates (4B) but yielded no improvement for (meth)allyl‐terminated PS‐1/PETMP. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45523.