Antivirulence Isoquinolone Mannosides: Optimization of the Biaryl Aglycone for FimH Lectin Binding Affinity and Efficacy in the Treatment of Chronic UTI

Uropathogenic E. coli (UPEC) employ the mannose‐binding adhesin FimH to colonize the bladder epithelium during urinary tract infection (UTI). Previously reported FimH antagonists exhibit good potency and efficacy, but low bioavailability and a short half‐life in vivo. In a rational design strategy, we obtained an X‐ray structure of lead mannosides and then designed mannosides with improved drug‐like properties. We show that cyclizing the carboxamide onto the biphenyl B‐ring aglycone of biphenyl mannosides into a fused heterocyclic ring, generates new biaryl mannosides such as isoquinolone 22 (2‐methyl‐4‐(1‐oxo‐1,2‐dihydroisoquinolin‐7‐yl)phenyl α‐d ‐mannopyranoside) with enhanced potency and in vivo efficacy resulting from increased oral bioavailability. N‐Substitution of the isoquinolone aglycone with various functionalities produced a new potent subseries of FimH antagonists. All analogues of the subseries have higher FimH binding affinity than unsubstituted lead 22 , as determined by thermal shift differential scanning fluorimetry assay. Mannosides with pyridyl substitution on the isoquinolone group inhibit bacteria‐mediated hemagglutination and prevent biofilm formation by UPEC with single‐digit nanomolar potency, which is unprecedented for any FimH antagonists or any other antivirulence compounds reported to date.     

Kinetic Properties of Carbohydrate–Lectin Interactions: FimH Antagonists

The lectin FimH is terminally expressed on type 1 pili of uropathogenic Escherichia coli (UPEC), which is the main cause of urinary tract infections (UTIs). FimH enables bacterial adhesion to urothelial cells, the initial step of infection. Various mannose derivatives have been shown to antagonize FimH and are therefore considered to be promising therapeutic agents for the treatment of UTIs. As part of the preclinical development process, when the kinetic properties of FimH antagonists were examined by surface plasmon resonance, extremely low dissociation rates (k_off) were found, which is uncommon for carbohydrate–lectin interactions. As a consequence, the corresponding half‐lives (t_1/2) of the FimH antagonist complexes are above 3.6 h. For a therapeutic application, extended t_1/2 values are a prerequisite for success, since the target occupancy time directly influences the in vivo drug efficacy. The long t_1/2 value of the tested FimH antagonists further confirms their drug‐like properties and their high therapeutic potential.     

The Tyrosine Gate of the Bacterial Lectin FimH: A Conformational Analysis by NMR Spectroscopy and X‐ray Crystallography

Urinary tract infections caused by uropathogenic E. coli are among the most prevalent infectious diseases. The mannose‐specific lectin FimH mediates the adhesion of the bacteria to the urothelium, thus enabling host cell invasion and recurrent infections. An attractive alternative to antibiotic treatment is the development of FimH antagonists that mimic the physiological ligand. A large variety of candidate drugs have been developed and characterized by means of in vitro studies and animal models. Here we present the X‐ray co‐crystal structures of FimH with members of four antagonist classes. In three of these cases no structural data had previously been available. We used NMR spectroscopy to characterize FimH–antagonist interactions further by chemical shift perturbation. The analysis allowed a clear determination of the conformation of the tyrosine gate motif that is crucial for the interaction with aglycone moieties and was not obvious from X‐ray structural data alone. Finally, ITC experiments provided insight into the thermodynamics of antagonist binding. In conjunction with the structural information from X‐ray and NMR experiments the results provide a mechanism for the often‐observed enthalpy–entropy compensation of FimH antagonists that plays a role in fine‐tuning of the interaction.     

FimH antagonists: structure-activity and structure-property relationships for biphenyl α-D-mannopyranosides

Urinary tract infections (UTIs) are caused primarily by uropathogenic Escherichia coli (UPEC), which encode filamentous surface‐adhesive organelles called type 1 pili. FimH is located at the tips of these pili. The initial attachment of UPEC to host cells is mediated by the interaction of the carbohydrate recognition domain (CRD) of FimH with oligomannosides on urothelial cells. Blocking these lectins with carbohydrates or analogues thereof prevents bacterial adhesion to host cells and therefore offers a potential therapeutic approach for prevention and/or treatment of UTIs. Although numerous FimH antagonists have been developed so far, few of them meet the requirement for clinical application due to poor pharmacokinetics. Additionally, the binding mode of an antagonist to the CRD of FimH can switch from an in‐docking mode to an out‐docking mode, depending on the structure of the antagonist. In this communication, biphenyl α‐D ‐mannosides were modified to improve their binding affinity, to explore their binding mode, and to optimize their pharmacokinetic properties. The inhibitory potential of the FimH antagonists was measured in a cell‐free competitive binding assay, a cell‐based flow cytometry assay, and by isothermal titration calorimetry. Furthermore, pharmacokinetic properties such as log D, solubility, and membrane permeation were analyzed. As a result, a structure–activity and structure–property relationships were established for a series of biphenyl α‐D ‐mannosides.     

Yersiniabactin Siderophore of Crohn’s Disease-Associated Adherent-Invasive Escherichia coli Is Involved in Autophagy Activation in Host Cells

Background: Adherent-invasive Escherichia coli (AIEC) have been implicated in the etiology of Crohn’s disease. The AIEC reference strain LF82 possesses a pathogenicity island similar to the high pathogenicity island of Yersinia spp., which encodes the yersiniabactin siderophore required for iron uptake and growth of the bacteria in iron-restricted environment. Here, we investigated the role of yersiniabactin during AIEC infection. Methods: Intestinal epithelial T84 cells and CEABAC10 transgenic mice were infected with LF82 or its mutants deficient in yersiniabactin expression. Autophagy was assessed by Western blot analysis for p62 and LC3-II expression. Results: Loss of yersiniabactin decreased the growth of LF82 in competitive conditions, reducing the ability of LF82 to adhere to and invade T84 cells and to colonize the intestinal tract of CEABAC10 mice. However, yersiniabactin deficiency increased LF82 intracellular replication. Mechanistically, a functional yersiniabactin is necessary for LF82-induced expression of HIF-1α, which is implicated in autophagy activation in infected cells. Conclusion: Our study highlights a novel role for yersiniabactin siderophore in AIEC–host interaction. Indeed, yersiniabactin, which is an advantage for AIEC to growth in a competitive environment, could be a disadvantage for the bacteria as it activates autophagy, a key host defense mechanism, leading to bacterial clearance.     

Improvement of Aglycone π-Stacking Yields Nanomolar to Sub-nanomolar FimH Antagonists

Antimicrobial resistance has become a serious concern for the treatment of urinary tract infections. In this context, an anti-adhesive approach targeting FimH, a bacterial lectin enabling the attachment of E. coli to host cells, has attracted considerable interest. FimH can adopt a low/medium-affinity state in the absence and a high-affinity state in the presence of shear forces. Until recently, mostly the high-affinity state has been investigated, despite the fact that a therapeutic antagonist should bind predominantly to the low-affinity state. In this communication, we demonstrate that fluorination of biphenyl α-d -mannosides leads to compounds with perfect π–π stacking interactions with the tyrosine gate of FimH, yielding low nanomolar to sub-nanomolar K_D values for the low- and high-affinity states, respectively. The face-to-face alignment of the perfluorinated biphenyl group of FimH ligands and Tyr48 was confirmed by crystal structures as well as ¹H,¹⁵N-HSQC NMR analysis. Finally, fluorination improves pharmacokinetic parameters predictive for oral availability.     

Antibacterial Thin Film Composite Polyamide Membranes Prepared by Sequential Interfacial Polymerization

In this work, thin film composite polyamide (PA) membranes are modified by polyethyleneimine (PEI) and 2,6‐diaminopyridine (DAP) through sequential interfacial polymerization to fabricate contact active antibacterial membranes. The modified membranes show improved hydrophilicity and enhancement of zeta potential. Upon tethering with PEI and DAP onto the PA membranes, the membrane flux increases from 35.7 to 46.7 and 50.0 L m^?2 h^?1, respectively. Further the salt rejection rate improves from 96.6% to 98.0% and 98.8%, respectively. The PA‐PEI membranes have a better antibacterial performance than PA‐DAP, with a bacteria killing ratio for both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) over 96.7%, while a commercial LC LE‐4040 membrane presents bacteria killing ratio of 13.3% for E. coli and 8.4% for S. aureus, respectively.     

Facile Fabrication of Povidone Iodine-Embedded Polytetrafluoroethylene Superhydrophobic Films with Improved Antiadhesive and Bactericidal Properties in Bacterial Environments

It remains a challenge to maintain the antiadhesion properties of superhydrophobic films after exposure to bacterial environments. In this work, superhydrophobic bactericidal polymer films via the simple incorporation of polyvinylpyrrolidone-iodine (PVP-I) or iodine into polytetrafluoroethylene (PTFE) are fabricated to improve their antiadhesive and antibacterial capability. Superhydrophobic iodine-embedded films, polytetrafluoroethylene/polyvinylpyrrolidone-iodine and polytetrafluoroethylene-iodine (PTFE/PVP-I and PTFE-I), show excellent antiadhesive and bactericidal performances even post exposure to bacterial solutions as compared to iodine-free counterparts by controlling the release of iodine. Especially, superhydrophobic PTFE/PVP-I films display a more sustained iodine release profile and significant antibacterial properties against gram-positive (S. aureus, methicillin-resistant S. aureus (MRSA)) and gram-negative (E. coli) bacteria. Such a facile combination of antiseptic agents and superhydrophobic surface could be widely used for antiseptic biomedical applications.     

Synthesis and water absorbency of polyampholytic hydrogels with antibacterial activity

Amphoteric terpolymers of acrylic acid (AA), acrylamide (AM), and N,N′‐dimethyl‐N‐ethylmeth‐acryloxylethylammoniumbromide (DMAEA‐EB) with varied compositions P[AA‐AM‐(DMAEA‐EB)] were synthesized by inverse suspension polymerization. The components of P[AA‐AM‐(DMAEA‐EB)] were verified by FTIR spectroscopy. The water absorption ability and antibacterial activity of the copolymer against Escherichia coli(E. coli) and Staphylococcus hyicus(S. hyicus) suspended in sterilized physiological saline were investigated. The introduction of  N⁺R₄ may increase the water absorbency of P[AA‐AM‐(DMAEA‐EB)] in some degree because of the excellent hydrophilicity of  N⁺R₄. The AA‐AM‐(DMAEA‐EB) hydrogels exhibited high antibacterial activity against bacteria tested. The process of adsorption between live bacteria cells and resins was at least partially reversible. A peak of antibacterial efficiency existed with increasing contact time. The resin killed 96.6% E. coli organisms and 90.3% S. hyicus organisms, respectively, within 30 min of contact at dosage of 0.1g. The concentration of DMAEA‐EB has a special effect on the antibacterial activity of the polyampholytic hydrogels, which is different from polycation. It was observed that the antibacterial activity of the resin with 2 mol % of DMAEA‐EB is superior to the copolymers tested with other compositions. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effects of UV weathering on the mechanical and antibacterial performance of peroxide‐cured silicone rubber containing biocide HPQM

2‐Hydroxypropyl‐3‐piperazinyl‐quinoline carboxylic acid methacrylate (HPQM) was used as a biocide in a silicone rubber compound. Antibacterial and mechanical performance of the compound was assessed before and after exposure to UV light for different times. Drop‐plate and halo tests were employed to evaluate qualitatively and quantitatively the antibacterial performance of the compound against Escherichia coli (E. coli, ATCC 25922) and Staphylococcus aureus (S. aureus, ATCC 25923). The results showed that the cure characteristics and the physical and mechanical properties of the HPQM‐containing rubber compound were strongly affected by the UV light. The tensile properties and hardness increased with UV aging. The lightness (L*) of the rubber compound without HPQM did not change with UV exposure, whereas that for the compound with HPQM decreased with UV exposure. The longer the contact time, the better the ability for killing the bacteria. After experiencing initial UV aging for 3 days, the rubber compound with HPQM showed an effective killing ability. However, after prolonged UV exposure, the antibacterial efficacy was reduced as a result of HPQM removal from the rubber surface during the condensation stage and a post‐curing reaction of the residual peroxide in the rubber compound. Under UV light, the silicone rubber compound with HPQM had a greater preference for killing the E. coli. J. VINYL ADDIT. TECHNOL., 20:49–56, 2014. © 2014 Society of Plastics Engineers     

Synthesis of PEGylated chitosan copolymers as efficiently antimicrobial coatings for leather

In this work, poly(ethylene glcycol)‐grafted chitosan (PEG‐g‐CS) was synthesized by conjugating PEG to the chitosan (CS) backbone. Such PEGylated CS copolymer was further characterized by FTIR and ¹H NMR, and the results demonstrated the successful synthesis. After PEGylation, the water solubility of CS was significantly improved due to the hydrophilicity of the PEG polymer. Therefore, this PEGylated CS was prepared as water borne coating for leather surface. The morphology and hydrophilicity of this coating on leather was studied by SEM and water contact angle measurement. Furthermore, the antimicrobial activity of PEGylated CS coating was investigated by measuring its minimum inhibitory concentration and the inhibition zone of coated leather against Gram‐negative Escherichia coli and Gram‐positive Staphylococcus aureus, respectively. Compared to CS coating, such PEG‐g‐CS coating exhibited better antimicrobial property, which indicated the synergetic effect of the antimicrobial property of CS and the antiadhesive property of PEG. Thus, this PEGylated CS copolymer can be used as efficiently antimicrobial coating for leather product. © 2016 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43465.     

Efficiency of silver‐based antibacterial additives and its influence in thermoplastic elastomers

Styrene‐butylene/ethylene‐styrene‐based thermoplastic elastomers (TPE) are polymers with soft touch properties that are widely used for manufacturing devices that involve hand contact. However, when contaminated with microorganisms these products can contribute to spreading diseases. The incorporation of antibacterial additives can help maintain low bacteria counts. This work evaluated the antibacterial action of TPE loaded with silver ions and silver nanoparticles. The additives nanosilver on fumed silica (NpAg_silica), silver phosphate glass (Ag⁺_phosphate), and bentonite organomodified with silver (Ag⁺_bentonite) were added to the TPE formulation. The compounds were evaluated for tensile and thermal properties and antimicrobial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). All the additives eliminated over 90% of E. coli, but only NpAg_silica killed more than 80% of S. aureus population. The better effect of NpAg_silica was attributed to the additive's high specific surface area, which promoted greater contact with bacteria cells. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43956.     

Surface grafting of polyester fiber with chitosan and the antibacterial activity of pathogenic bacteria

Three polyesters—poly(ethylene terephthalate), poly(2‐methyl‐1,3‐propylene terephthalate‐co‐ethylene terephthalate), and poly(1,4‐cyclohexylene terephthalate‐co‐ethylene terephthalate)—were preirradiated with ⁶⁰Co‐γ‐rays. Then, acrylic acid and N‐vinylformamide were grafted to these irradiated fibers. Fibers grafted with N‐vinylformamide were further hydrolyzed with acid so that the amide groups would convert into amino groups, and they were treated with glutaraldehyde so that aldehyde groups would be introduced. Chitosan or chitooligosaccharide was then grafted to these fibers via either esterification or imine formation. Four pathogenic bacteria—methicillin‐resistant Staphylococcus aureus‐1 (MRSA), Staphylococcus aureus‐2, Escherichid coli, and Pseudomonas aeruginosa—were tested to determine the antibacterial activities of chitosan‐grafted and chitooligosaccharide‐grafted fibers. The results showed that grafting chitosan via imine formation could achieve a higher surface density for amino groups and give higher antibacterial activity to those four bacteria tested. The antibacterial activity for E. coli was the highest and that for MRSA was the lowest among the four bacteria tested. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2977–2983, 2002     

Synthesis and Antimicrobial Activities of Oximes Derived from O-Benzylhydroxylamine as FabH Inhibitors

Forty‐three oxime derivatives were synthesized by allowing O‐benzylhydroxylamines to react with primary benzaldehydes or salicylaldehydes; these products were gauged as potential inhibitors of β‐ketoacyl‐(acyl‐carrier‐protein) synthase III (FabH). Among the 43 compounds, 38 are reported herein for the first time. These compounds were assayed for antimicrobial activities against Escherichia coli, Pseudomonas aeruginosa, Pseudomonas fluorescens, Bacillus subtilis, Staphylococcus aureus, and Enterococcus faecalis. Compounds with prominent antibacterial activities were tested for their E. coli FabH inhibitory activities. 3‐((2,4‐Dichlorobenzyloxyimino)methyl)benzaldehyde O‐2,4‐dichlorobenzyl oxime ( 44 ) showed the best antibacterial activity, with minimum inhibitory concentrations of 3.13–6.25 μg mL^?1 against the tested bacterial strains, exhibiting the best E. coli FabH inhibitory activity, with an IC₅₀ value of 1.7 mM . Docking simulations were performed to position compound 44 into the E. coli FabH active site in order to determine the most probable binding conformation.     

Transformation of bile acids and sterols by clostridia (fusiform bacteria) in Wistar rats

The effects on bile acid and sterol transformation of clostridia (fusiform bacteria), the dominant intestinal bacteria in rodents (ca. 10¹⁰ counts per g wet feces) were examined in Wistar rats. After inoculation of clostridia into germ-free rats and into rats previously inoculated solely with Escherichia coli, most of the endogenous bile acids were deconjugated, and cholic acid and chenodeoxycholic acid were 7α-dehydroxylated to deoxycholic acid and lithocholic acid, respectively. Tauro-β-muricholic acid, another major bile acid in rats, was deconjugated, but only part of it (ca. 30%) was transformed into hyodeoxycholic acid. Cholesterol and sitosterol were also reduced to coprostanol and sitostanol, respectively. Escherichia coli transformed neither bile acids nor sterols. These data suggest that clostridia play an imporant role in the formation of secondary bile acids and coprostanol in rats.     

Disinfection of recycled red‐meat‐processing wastewater by ozone

Ozonation of a real red‐meat‐processing wastewater was conducted in a semi‐batch reactor to explore the possibility of the water reuse. The experimental results revealed that ozone was very effective in disinfection of the red‐meat‐processing wastewater. After 8 min of ozonation with an applied ozone dose of 23.09 mg min^?1 liter^?1 of wastewater, 99% of aerobic bacteria, total coliforms and Escherichia coli were inactivated. Empirical models were developed to predict the microbial inactivation efficacy of ozone from the CT values for the real red‐meat‐processing wastewater. A correlation was also derived to estimate the CT values from the applied ozone dose and the ozone contact time. The results also revealed that under the ozonation condition for 99% inactivation of aerobic bacteria, total coliforms and E coli, the decrease in the chemical oxygen demand and the 5‐day biological oxygen demand of the wastewater were 10.7% and 23.6%, respectively. However, ozonation under this condition neither improved the light transmission nor reduced the total suspended solids (TSS) despite of the decolorization of the wastewater after ozonation. Copyright © 2005 Society of Chemical Industry     

Adsorption and antibacterial activity of silver‐dispersed carbon aerogels

Silver‐dispersed carbon aerogels (Ag/CAs) were obtained by the direct immersion of organic aerogels in aqueous AgNO₃ solutions and then carbonization of the resulting material under a nitrogen atmosphere. The adsorption and antibacterial activity of Escherichia coli and Staphylococcus aureus on Ag/CAs were studied by the measurement of the amount of viable bacteria in suspensions and scanning electron microscopy (SEM) observations. The adsorbed amount of bacteria on samples without silver increased with an increase in the carbonization temperature and contact time. SEM studies showed that the adsorption capacity of Ag/CAs decreased with an increase in the silver content; this was considered to be mainly due to the dissolution behavior of bacteria by silver ions. The antibacterial test showed that 2.5 mg of Ag/CAs with more than 3.6% Ag could inhibit the growth of 10⁵ cfu/mL E. coli in 10 mL of a Mueller–Hinton broth culture, but in the case of S. aureus, 10‐mg samples just got the same antibacterial effect. An antibacterial persistency test showed that 25 mg of Ag/CAs with 6.5% Ag could kill 50 mL of 10⁵ cfu/mL E. coli eight times. These results indicate that Ag/CAs possess strong and long‐term antibacterial activity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1030–1037, 2006     

Biochemical Investigation of 3-Sulfopropionaldehyde Reductase HpfD

Sulfoquinovose is the polar headgroup of plant sulfolipids and is a globally abundant organosulfur compound, and its degradation by bacteria is an important component of the sulfur cycle. Sulfoquinovose degradation by certain bacteria, including Escherichia coli, produces dihydroxypropanesulfonate (DHPS), which is further converted by anaerobic bacteria into 3-hydroxypropanesulfonate (3-HPS), through the catalytic action of DHPS dehydratase (a member of the glycyl radical enzyme family), and sulfopropionaldehyde reductase HpfD (a member of the metal-dependent alcohol dehydrogenase family). Here we report biochemical investigation of Hungatella hathewayi HpfD. In addition to 3-HPS, HpfD also displayed high catalytic activities for NAD⁺-dependent oxidation of 4-hydroxybutanesulfonate (4-HBS) and γ-hydroxybutyrate (GHB). The highest activity was obtained with Fe²⁺ or Mn²⁺ as the divalent metal cofactor. Bioinformatics studies suggest that, in addition to DHPS degradation, 3-HPS and γ-aminobutyrate (GABA) degradations also involve HpfD homologs.     

ABCG5/G8 Deficiency in Mice Reduces Dietary Triacylglycerol and Cholesterol Transport into the Lymph

The adenosine triphosphate‐binding cassette (ABC) transporter G5/G8 is critical in protecting the body from accumulating dietary plant sterols. Expressed in the liver and small intestine, it transports plant sterols into the biliary and intestinal lumens, thus promoting their excretion. The extent to which G5/G8 regulates cholesterol absorption remains unclear. G5/G8 is also implicated in reducing the absorption of dietary triacylglycerols (TAG) by unknown mechanisms. We hypothesized that G5/G8 suppresses the production of chylomicrons, and its deficiency would enhance the absorption of both dietary TAG and cholesterol. The aim of this study was to investigate the effects of G5/G8 deficiency on lipid uptake and secretion into the lymph under steady‐state conditions. Surprisingly, compared with wild‐type mice (WT) (n = 9), G5/G8 KO (n = 13) lymph fistula mice given a continuous intraduodenal infusion of [3H]‐TAG and [14C]‐cholesterol showed a significant (P < 0.05) reduction in lymphatic transport of both [³H]‐TAG and [¹⁴C]‐cholesterol, concomitant with a significant (P < 0.05) increase of [³H]‐TAG and [¹⁴C]‐cholesterol accumulated in the intestinal lumen. There was no difference in the total amount of radiolabeled lipids retained in the intestinal mucosa between the two groups. G5/G8 KO mice given a bolus of TAG showed reduced intestinal TAG secretion compared with WT, suggesting an independent role for G5/G8 in facilitating intestinal TAG transport. Our data demonstrate that G5/G8 deficiency reduces the uptake and secretion of both dietary TAG and cholesterol by the intestine, suggesting a novel role for the sterol transporter in the formation and secretion of chylomicrons.