Coordination of cobalt(III), nickel(II), copper(II), palladium(II) and platinum(II) with N-ethyl-N′-(4′-methylthiazol-2′-yl)thiourea (HL)

Coordination complexes of formula [ML₂], [CoL₃], [Pd(HL)Cl₂], [CuLCl(H₂O)] and [CuL₂(H₂O)₂] {L=anion of N-ethyl-N^′-(4^′-methylthiazol-2′-yl)thiourea; M=Pt^II, Pd^II or Ni^II} were prepared and characterized by elemental analyses, magnetic susceptibilities, and by IR, NMR, electronic and mass spectral measurements.     

Hydrothermal Synthesis of Cd(II), Mn(II) and Ni(II) Coordination Polymers Derived from Benzopenone-2,4′-carboxylate and N-door Ligands

Three new coordination polymers [Cd(L)(4,4′-bipy)_0.5]_n (1), {[Mn(L)(bpp)]·H₂O}_n (2) and [Ni(L)(2,2′-bipy)(H₂O)₂]_n(3) [H₂L = Benzopenone-2,4′-dicarboxylic acid, 4,4′-bipy = 4,4′-bipy ridine, bpp = 1,3-di(4-pyridyl) propane and 2,2′-bipy = 2,2′-bipyridine] have been synthesized and structurally characterized by elemental analysis, IR and X-ray diffraction. Single-crystal X-ray analyses revealed that the H₂L ligand acts as a bridge, exhibiting three coordination modes to link metal ion: bidentate chelating, bis-monodentate, monodentate. Compound 1 has 3-connected metal–organic framework with the (6³) topology notation; Compounds 2 and 3 are one-dimensional chain structures. The luminescent properties for compound 1 was investigated.     

Carbonyl and chloro complexes of ruthenium(II) containing 3,3′-diester-2,2′-bipyridyl ligands

A series of 3,3′-dialkoxycarbonyl-2,2′-bipyridines (alkyl=Me, Et, i-Pr, i-Bu) has been prepared in good yield from 1,10-phenanthroline. The synthesis and characterization of the corresponding trans-(Cl)-Ru(L)(CO)₂Cl₂ and cis-Ru(L)₂Cl₂ complexes are described.     

Syntheses and Characterization of New Nano-porous Soft Copper(II) Metal–organic Framework and Nano-porous Two-dimensional Manganese(II) and Zinc(II) Coordination Polymers with 4,4′-Bipyridine and 2-Sulfobenzoic Acid

Three new Cu(II), Mn(II), and Zn(II) coordination polymers with 4,4′-bipyridine (4,4′-bipy) and 2-sulfobenzoic acid (2-H₂sb) ligands, [M(4,4′-bipy)(2-sb)(H₂O)]_n, have been synthesized and characterized by IR spectroscopy and elemental analyses. The structures were determined by single-crystal X-ray crystallography. The structural studies show that the metal atoms have six-coordinate geometry with a distorted octahedral environment constructed with 4,4′-bipy and 2-sb²⁻ linkers stacked over each other to generate a two-dimension motif. Self-assembly of these compounds in the solid state is likely caused by coordination and hydrogen-bonds. While polymers containing Zn(II) and Mn(II) have analogous structures, the Cu(II)-containing nano-porous soft metal–organic framework presents a different structure.     

Metal-Ion Type Effect on the Crystal Structure and Optical Properties of 2,2′-bipyridine Complexes of Pb(II) and Cd(II)

To investigate the effect of metal ion type on the crystal structure and optical and thermal behaviors of coordination compounds, two homometal and one heterometal 2,2′-bipyridine complexes of Pb(II) and Cd(II) have been synthesized and characterized by elemental analysis, PXRD, FT-IR and single crystal X-ray diffraction. Crystal structure analysis of heterometal coordination polymer, [Pb₂Cd(2,2′-bipy)₄(NO₃)₆]_n, displays the attendance of a centrosymmetric 1D coordination polymer that crystallizes in the triclinic system with the space group of \({\text{p}}_{1}^{ - }\). Thermal behavior of prepared coordination compounds was examined under air atmosphere by thermogravimetric analysis. The study of optical properties of compounds showed that metal ion type of coordination compounds is influential on their photophysical properties. Moreover, heterometal coordination polymer was doped into a PVK:PBD blend in two different concentrations as a light emitting material in the fabrication of two organic light-emitting diodes.     

4′-(Oxodiphenylphosphino)-2,2′:6′,2′′-terpyridine – crystal structure and complexes of cobalt(II) and cobalt(III)

The complex [Co(2)₂]²⁺ (2 = 4^′-(oxodiphenylphosphino)-2,2^′:6^′,2^′′-terpyridine) has been prepared either by the direct reaction of 2 with Co(II) or by careful oxidation of [Co(1)₂]²⁺(1 = 4^′-(diphenylphosphino)-2,2^′:6^′,2^′′-terpyridine). Further oxidation with H₂O₂ leads to [Co(2)₂]³⁺. The ¹H NMR spectra of the paramagnetic and diamagnetic [Co(2)₂]²⁺ and [Co(2)₂]³⁺ are reported. The crystal structure of ligand 1 has been determined; in the solid-state, 1 exhibits extensive intermolecular π–π stacking.     

Novel Polymeric Metal Complexes of 2,7-Bis[2-(2′-Pyridyl) Benzimidazole]- 9,9′-Dioctylfluorene with Cu(II)and Zn(II): Synthesis and Luminescence Properties

Abstract  A novel ligand, 2,7-bis[2-(2′-Pyridyl)benzimidazole]- 9,9′-dioctylfluorene (BPDOF) and its polymeric complexes with copper(II) and zinc(II) were successfully synthesized and characterized by ¹H NMR, FT-IR, elemental analysis, UV-vis, conductivity measurements and gel permeation chromatography. The UV–vis absorption, fluorescence spectra, and thermal properties of these complexes were investigated at room temperature. The experimental results show that polymeric metal complexes BPDOF-Cu(II) and BPDOF-Zn(II) emit purple/green luminescence at 430 and 509 nm in DMF solution and emit green luminescence at 495 and 527 nm in the solid state. Thermal properties measurement and analysis show that they have good thermal stabilities. Graphical Abstract  Synthesis route: 2,7-bis[2-(2′-Pyridyl) benzimidazole]- 9,9′-dioctylfluorene (BPDOF) was synthesized using 2-(2′-Pyridyl)benzimidazole and 2,7-dibromo-9,9′-dioctylfluorene by Ullmann condensation. Polymeric metal complexes of the corresponding were synthesized with CuCl₂ · 2H₂O, ZnCl₂.      

The dimeric and two-dimensional copper(II) complexes constructed from salicylic acid and 4,4′-bipyridine

Two novel complexes, [Cu₂(Hsal)₄(4,4^′-bipyridine)(H₂O)₂(DMF)₂] (1) (H₂sal=salicylic acid) and {[Cu(Hsal)₂(4,4^′-bipyridine)](H₂O)(H₂sal)}_n (2), were synthesized by layered-solution method and structurally characterized. Geometries of copper atoms in both complexes exhibit square pyramidal. Complex 1 is a dimer and hydrogen bonds between water and DMF molecules extend the structure into 1D hydrogen bonding network. Complex 2 consists of two-dimensional square framework structure.     

Synthesis,characterization and crystal structure of one Mn(II) complex with 4,4′-bisimidazolylbiphenyl and 4,4′-sulfonyldibenzoic acid

One new title compound [Mn₃(BIBP)(sdb)(NO₂⁻)₂(H₂O)₂]_n·2DMF (1) (BIBP = 4,4′-bisimidazolylbiphenyl, sdb = 4,4′-sulfonyldibenzoic acid) has been synthesized under hydrothermal condition. The title compound was characterized by IR spectra, thermal analysis, single crystal and powder X-ray diffraction. Magnetic susceptibility measurements indicate that compound 1 exhibits antiferromagnetic coupling interaction.     

Ion exchange and charge transport properties of polymeric tris(4-vinyl-4′-methyl-2,2′-bipyridine) ruthenium(II) films

Multiply charged electroactive anions [IrCl ₆ ^2? , Fe(CN) ₆ ^3? , and W(CN) ₈ ^4? ] are electrostatically incorporated in polymeric films of tris(4-vinyl-4′-methyl-2,2′-bipyridine) ruthenium(II) [poly-Ru(vbpy) ₃ ²⁺ ] from aqueous trifluoroacetate solution. Values of apparent diffusion coefficients (D _ct) and heterogenous electron transfer rates (k _et) are measured for these anions as a function of their relative concentration (Γ _M/Γ _Ru) in the film.D _ct andk _et decrease systematically asΓ _M/Γ _Ru increases in a manner that is independent of charge and chemical identity of the ion. This result suggests that a nonchemical process, presumably electrostatic cross-linking, limits diffusional motion and is responsible for the decrease inD _ct andk _et with increasing anion content. Protonated polyvinyl-pyridine films exhibit similar ranges and variations inD _ct andk _et, which suggest similar structures and mechanisms of charge transport for these films and poly-Ru(vbpy) ₃ ²⁺ .     

A unique three-dimensional coordination polymer constructed from 4,4′-biphenyldicarboxylate and zinc(II)

Zinc(II) coordination polymer [Zn(bpdc)]_n (bpdc=4,4^′-biphenyldicarboxylate) (1) with a unique entanglement PtS structure was synthesized by hydrothermal reaction of zinc nitrate and 4,4-biphenyldicarboxylic acid in aqueous sodium hydroxide solution.     

Oxidative cyclization and coordinate polymerization of N-benzoyl-N′-(2-pyridyl)thiourea with copper(II) chloride

A chloride-bridged one-dimensional Cu(II) coordination polymer is prepared by the treatment of N-benzoyl-N′-(2-pyridyl)thiourea with a large excess of Cu(II)Cl₂ in ethanol solution via oxidative cyclization and coordinate polymerization.     

Oxidation of Benzene Catalyzed by 2,2′-Bipyridine and 1,10-Phenantroline Cu(II) Complexes

The use of mononuclear Cu(II) 2,2′-bipyridine and 1,10-phenantroline complexes as catalysts in the oxidation of benzene, using hydrogen peroxide and tert-butyl hydroperoxide as oxidant in CH₃CN/H₂O solution is presented. The reactions were carried out at 25 and at 50 °C. The complexes [Cu(bipy)₃]Cl₂ · 6H₂O (1), [Cu(bipy)₂Cl]Cl · 5H₂O (2), [Cu(bipy)Cl₂] (3), [Cu(phen)₃]Cl₂ · 7H₂O (4), [Cu(phen)₂Cl]Cl · 5H₂O (5), [Cu(phen)Cl₂] (6) were able to oxidize benzene into phenol, hydroquinone and p-benzoquinone. Highest conversion (22%) was obtained using [Cu(Phen)Cl₂] (6) as catalyst.     

Syntheses and Characterization of Two New M(II)-5,5′-dimethyl-2,2′-bipyridine (M = Cd and Pb) Coordination Polymers and Study of Their Thermal and Electrochemical Properties

Two new cadmium(II) and lead(II)-thiocyanato coordination polymers with 5,5′-dimethyl-2,2′-bipyridine (5,5′-dm-2,2′-bpy) as chelating ligands were synthesized and characterized by elemental analysis, IR and ¹H NMR spectroscopy and by X-ray crystallography. Thermal and electrochemical properties were also studied as well. These complexes have formed formula [Cd(5,5′-dm-2,2′-bpy)(NCS)₂]_n (1) and [Pb(5,5′-dm-2,2′-bpy)(CH₃COO)(NCS)]_n (2). The coordination numbers of Cd^II in 1 and Pb^II in 2 are six (CdN₄S₂) and seven (PbN₃O₃S₂), respectively. In 2, “stereo-chemically active” electron lone pairs and the coordination spheres were hemidirected. Bridging properties of thiocyanato anions in 1 and 2 created one- and two-dimensional coordination polymers, respectively. The supramolecular features in these complexes were guided and controlled by weak directional intermolecular interactions.     

Two-dimensional assembling of 4,4′-bipyridine and 4,4′-azopyridine bridged iron (II) linear coordination polymers via hydrogen bond

Novel two-dimensional polymers, [Fe(L¹)(H₂O)₂(NCX)₂] · L¹ (L¹ = 4,4′-bipyridine (bipy)) (1, 2) and [Fe(L²)(CH₃OH)₂-(NCX)₂] · L² (L² = 4,4′-azopyridine (azpy)) (3) and X = S (1,3),Se (2), have been synthesized and characterized by X-ray crystallography. The structures reveal the formation of trans-L-bridged [Fe(NCX)₂(Y)₂] where Y = H₂O, CH₃OH linear chains assembled into two-dimensional networks by hydrogen bonds between the uncoordinated ligand L and the coordinated solvent molecules.     

Extraction of Copper(II) with N′,N′-Dialkylhydrazides of Benzoic and Phenylacetic Acids

This article is concerned with the study of the extraction of Cu(II), Co(II), Ni(II), and Zn(II) with N′,N′-dialkylhydrazides of benzoic and phenylacetic acids. The applied reagents are able to extract Cu(II) from ammoniac media efficiently. The influence of the length and structure of alkyl chains on the extraction of Cu(II) has been analyzed. It is shown that N′,N′-dibytil- and N′,N′-dihexylhydrazides of benzoic acid exhibit the most promise for extracting Cu(II) from ammoniac media, and N′,N′-dihexylhydrazide of phenylacetic acid as an extractant is worse than the analogous benzoic acid derivative. Copper stripping has been studied for various concentrations of H₂SO₄, and the copper extraction constants have been calculated. The data obtained indicate that the degree of Cu(II) extraction decreases with increasing concentration of ammonium salts.     

Adsorption Behavior of Cadmium(II) and Lead(II) on Mesoporous Silicate MCM‐41

Abstract

This investigation examines metal ion adsorption on mesoporous silicate, MCM‐41, synthesized from sodium silicate solution and cethyltrimethylammonium bromide (CTAB). MCM‐41 has potential as an adsorbent material, with a regular hexagonal pore structure, large specific surface area, and large pore volume. The MCM‐41 synthesized for this investigation is characterized using powder X‐ray diffraction and nitrogen adsorption and desorption isotherms data. The adsorption behavior for cadmium(II) and lead(II) onto MCM‐41 was studied by contacting the mesoporous silicate with an aqueous solution of metal salts and acetylacetone. Both Cd²⁺ and Pb²⁺ were found to quantitatively adsorb onto MCM‐41. The results of this study suggest that MCM‐41 may have applications in the recovery of toxic metals from waste waters.     

Iron versus ruthenium oxidation in 1,1′-bis(diphenylphosphino)ferrocene–ruthenium(II) complexes: EPR and spectroelectrochemical evidence

Oxidation of [Cp^*RuH(dppf)] (1), dppf=1,1′-bis(diphenylphosphino)ferrocene, and [(Cym)RuCl(dppf)](PF₆) (2), Cym=p-cymene, occurs at ruthenium for 1 but yields a ferrocenium species for compound 2.     

Removal efficiency of Pb(II), Zn(II), Cd(II) and Cu(II) from aqueous solution and natural water by ketoenol–pyrazole receptor functionalized silica hybrid adsorbent

In this study, we reported an efficient, alternative, and low-cost adsorbent for the efficient removal of Pb(II), Zn(II), Cd(II) and Cu(II) from water. The new hybrid material has been prepared by immobilizing a conjugated system (2Z)-1-(1,5-dimethyl-1H-pyrazol-3-yl)-3-hydroxybut-2-en-1-one on silica gel previously doped with 3-aminopropyltrimethoxysilane. The formed surface (SiNPz) was perfectly analyzed. Adsorption studies have demonstrated the ability to highlight the surface designed for efficient removal of above toxic metals from aqueous solutions using FAAS. The new material was used for the extraction of metals from natural water and showed efficiency results for toxic heavy metals.