Albumin-Coated Single-Core Iron Oxide Nanoparticles for Enhanced Molecular Magnetic Imaging (MRI/MPI)

Colloidal stability of magnetic iron oxide nanoparticles (MNP) in physiological environments is crucial for their (bio)medical application. MNP are potential contrast agents for different imaging modalities such as magnetic resonance imaging (MRI) and magnetic particle imaging (MPI). Applied as a hybrid method (MRI/MPI), these are valuable tools for molecular imaging. Continuously synthesized and in-situ stabilized single-core MNP were further modified by albumin coating. Synthesizing and coating of MNP were carried out in aqueous media without using any organic solvent in a simple procedure. The additional steric stabilization with the biocompatible protein, namely bovine serum albumin (BSA), led to potential contrast agents suitable for multimodal (MRI/MPI) imaging. The colloidal stability of BSA-coated MNP was investigated in different sodium chloride concentrations (50 to 150 mM) in short- and long-term incubation (from two hours to one week) using physiochemical characterization techniques such as transmission electron microscopy (TEM) for core size and differential centrifugal sedimentation (DCS) for hydrodynamic size. Magnetic characterization such as magnetic particle spectroscopy (MPS) and nuclear magnetic resonance (NMR) measurements confirmed the successful surface modification as well as exceptional colloidal stability of the relatively large single-core MNP. For comparison, two commercially available MNP systems were investigated, MNP-clusters, the former liver contrast agent (Resovist), and single-core MNP (SHP-30) manufactured by thermal decomposition. The tailored core size, colloidal stability in a physiological environment, and magnetic performance of our MNP indicate their ability to be used as molecular magnetic contrast agents for MPI and MRI.     

Biological Properties of Iron Oxide Nanoparticles for Cellular and Molecular Magnetic Resonance Imaging

Superparamagnetic iron-oxide particles (SPIO) are used in different ways as contrast agents for magnetic resonance imaging (MRI): Particles with high nonspecific uptake are required for unspecific labeling of phagocytic cells whereas those that target specific molecules need to have very low unspecific cellular uptake. We compared iron-oxide particles with different core materials (magnetite, maghemite), different coatings (none, dextran, carboxydextran, polystyrene) and different hydrodynamic diameters (20–850 nm) for internalization kinetics, release of internalized particles, toxicity, localization of particles and ability to generate contrast in MRI. Particle uptake was investigated with U118 glioma cells und human umbilical vein endothelial cells (HUVEC), which exhibit different phagocytic properties. In both cell types, the contrast agents Resovist, B102, non-coated Fe₃O₄ particles and microspheres were better internalized than dextran-coated Nanomag particles. SPIO uptake into the cells increased with particle/iron concentrations. Maximum intracellular accumulation of iron particles was observed between 24 h to 36 h of exposure. Most particles were retained in the cells for at least two weeks, were deeply internalized, and only few remained adsorbed at the cell surface. Internalized particles clustered in the cytosol of the cells. Furthermore, all particles showed a low toxicity. By MRI, monolayers consisting of 5000 Resovist-labeled cells could easily be visualized. Thus, for unspecific cell labeling, Resovist and microspheres show the highest potential, whereas Nanomag particles are promising contrast agents for target-specific labeling.     

Magnetic Resonance Imaging of Tumor-Infiltrating Lymphocytes by Anti-CD3-Conjugated Iron Oxide Nanoparticles

Immune checkpoint blockade, considered a revolutionary approach in cancer treatment, is only effective in patients with high tumor-infiltrating lymphocytes (TILs). This work aimed to investigate the feasibility of targeted contrast agent (CA) based on dextran-coated superparamagnetic iron oxide nanoparticles (SPIONs-DEX) for TILs detection by magnetic resonance imaging (MRI) studies. To do so, we synthesized an MRI CA by conjugating SPIONs-DEX to an anti-CD3 monoclonal antibody via cyanogen bromide as a cross-linker. In vitro assessments demonstrated the higher labeling efficiency of the developed CA to CD3+ lymphocytes compared to SPIONs-DEX. In vivo MRI of a xenograft model of CD3+ lymphocytes revealed the significant signal loss after the intravenous injection of the bioconjugate by ∼34 % and 21 % in T₂*-weighted and T₂-weighted images, respectively. The histopathological evaluation of xenograft tumors confirmed the labeling of lymphocytes by the targeted CA. This approach could open up a new horizon in the non-invasive assessment of TILs to identify patients eligible for immunotherapy.     

Highly Bright Silica-Coated InP/ZnS Quantum Dot-Embedded Silica Nanoparticles as Biocompatible Nanoprobes

Quantum dots (QDs) have outstanding optical properties such as strong fluorescence, excellent photostability, broad absorption spectra, and narrow emission bands, which make them useful for bioimaging. However, cadmium (Cd)-based QDs, which have been widely studied, have potential toxicity problems. Cd-free QDs have also been studied, but their weak photoluminescence (PL) intensity makes their practical use in bioimaging challenging. In this study, Cd-free QD nanoprobes for bioimaging were fabricated by densely embedding multiple indium phosphide/zinc sulfide (InP/ZnS) QDs onto silica templates and coating them with a silica shell. The fabricated silica-coated InP/ZnS QD-embedded silica nanoparticles (SiO₂@InP QDs@SiO₂ NPs) exhibited hydrophilic properties because of the surface silica shell. The quantum yield (QY), maximum emission peak wavelength, and full-width half-maximum (FWHM) of the final fabricated SiO₂@InP QDs@SiO₂ NPs were 6.61%, 527.01 nm, and 44.62 nm, respectively. Moreover, the brightness of the particles could be easily controlled by adjusting the amount of InP/ZnS QDs in the SiO₂@InP QDs@SiO₂ NPs. When SiO₂@InP QDs@SiO₂ NPs were administered to tumor syngeneic mice, the fluorescence signal was prominently detected in the tumor because of the preferential distribution of the SiO₂@InP QDs@SiO₂ NPs, demonstrating their applicability in bioimaging with NPs. Thus, SiO₂@InP QDs@SiO₂ NPs have the potential to successfully replace Cd-based QDs as highly bright and biocompatible fluorescent nanoprobes.     

氧化铁磁性纳米粒子的表面修饰及应用

氧化铁磁性纳米粒子因其优异的性能,广泛应用于环境分离、生物活性物质的富集和分离等领域,近年来引起了广泛的关注和研究。文章总结了氧化铁肱性纳米粒子表面修饰方法及相关应用,并对其前号进行了展望。     

Magnetic Fluorescent Quantum Dots Nanocomposites in Food Contaminants Analysis: Current Challenges and Opportunities

The presence of food contaminants can cause foodborne illnesses, posing a severe threat to human health. Therefore, a rapid, sensitive, and convenient method for monitoring food contaminants is eagerly needed. The complex matrix interferences of food samples and poor performance of existing sensing probes bring significant challenges to improving detection performances. Nanocomposites with multifunctional features provide a solution to these problems. The combination of the superior characteristics of magnetic nanoparticles (MNPs) and quantum dots (QDs) to fabricate magnetic fluorescent quantum dots (MNPs@QDs) nanocomposites are regarded as an ideal multifunctional probe for food contaminants analysis. The high-efficiency pretreatment and rapid fluorescence detection are concurrently integrated into one sensing platform using MNPs@QDs nanocomposites. In this review, the contemporary synthetic strategies to fabricate MNPs@QDs, including hetero-crystalline growth, template embedding, layer-by-layer assembly, microemulsion technique, and one-pot method, are described in detail, and their advantages and limitations are discussed. The recent advances of MNPs@QDs nanocomposites in detecting metal ions, foodborne pathogens, toxins, pesticides, antibiotics, and illegal additives are comprehensively introduced from the perspectives of modes and detection performances. The review ends with current challenges and opportunities in practical applications and prospects in food contaminants analysis, aiming to promote the enthusiasm for multifunctional sensing platform research.     

纳米氧化铁的制备及其掺杂效应

纳米氧化铁作为气敏材料得到广泛重视。本文重点介绍了近年来应用比较普遍的合成纳米氧化铁的方法,如:溶胶—凝胶法、共沉淀法、水热法、水解法,并指出了各种方法的优缺点;同时,介绍了在掺杂了不同的物质后纳米氧化铁具有的独特的气敏性能;最后,对氧化铁基气敏元件的烧成工艺进行了比较。     

Accumulation and Toxicity of Superparamagnetic Iron Oxide Nanoparticles in Cells and Experimental Animals

The uptake and distribution of negatively charged superparamagnetic iron oxide (Fe₃O₄) nanoparticles (SPIONs) in mouse embryonic fibroblasts NIH3T3, and magnetic resonance imaging (MRI) signal influenced by SPIONs injected into experimental animals, were visualized and investigated. Cellular uptake and distribution of the SPIONs in NIH3T3 after staining with Prussian Blue were investigated by a bright-field microscope equipped with digital color camera. SPIONs were localized in vesicles, mostly placed near the nucleus. Toxicity of SPION nanoparticles tested with cell viability assay (XTT) was estimated. The viability of NIH3T3 cells remains approximately 95% within 3–24 h of incubation, and only a slight decrease of viability was observed after 48 h of incubation. MRI studies on Wistar rats using a clinical 1.5 T MRI scanner were showing that SPIONs give a negative contrast in the MRI. The dynamic MRI measurements of the SPION clearance from the injection site shows that SPIONs slowly disappear from injection sites and only a low concentration of nanoparticles was completely eliminated within three weeks. No functionalized SPIONs accumulate in cells by endocytic mechanism, none accumulate in the nucleus, and none are toxic at a desirable concentration. Therefore, they could be used as a dual imaging agent: as contrast agents for MRI and for traditional optical biopsy by using Prussian Blue staining.     

Theranostic Platforms Based on Silica and Magnetic Nanoparticles Containing Quinacrine,Chitosan, Fluorophores,and Quantum Dots

In this paper, we describe the synthesis of multilayer nanoparticles as a platform for the diagnosis and treatment of ischemic injuries. The platform is based on magnetite (MNP) and silica (SNP) nanoparticles, while quinacrine is used as an anti-ischemic agent. The synthesis includes the surface modification of nanoparticles with (3-glycidyloxypropyl)trimethoxysilane (GPMS), the immobilization of quinacrine, and the formation of a chitosan coating, which is used to fix the fluorophore indocyanine green (ICG) and colloidal quantum dots AgInS₂/ZnS (CQDs), which serve as secondary radiation sources. The potential theranostic platform was studied in laboratory animals.     

Starch-Coated Magnetic Iron Oxide Nanoparticles for Affinity Purification of Recombinant Proteins

Starch-coated magnetic iron oxide nanoparticles have been synthesized by a simple, fast, and cost-effective co-precipitation method with cornstarch as a stabilizing agent. The structural and magnetic characteristics of the synthesized material have been studied by transmission electron microscopy, Mössbauer spectroscopy, and vibrating sample magnetometry. The nature of bonds between ferrihydrite nanoparticles and a starch shell has been examined by Fourier transform infrared spectroscopy. The data on the magnetic response of the prepared composite particles have been obtained by magnetic measurements. The determined magnetic characteristics make the synthesized material a good candidate for use in magnetic separation. Starch-coated magnetic iron oxide nanoparticles have been tested as an affinity sorbent for one-step purification of several recombinant proteins (cardiac troponin I, survivin, and melanoma inhibitory activity protein) bearing the maltose-binding protein as an auxiliary fragment. It has been shown that, due to the highly specific binding of this fragment to the starch shell, the target fusion protein is selectively immobilized on magnetic nanoparticles and eluted with the maltose solution. The excellent efficiency of column-free purification, high binding capacity of the sorbent (100–500 µg of a recombinant protein per milligram of starch-coated magnetic iron oxide nanoparticles), and reusability of the obtained material have been demonstrated.     

Magnetic Iron Oxide Nanoparticles for Multimodal Imaging and Therapy of Cancer

Superparamagnetic iron oxide nanoparticles (SPION) have emerged as an MRI contrast agent for tumor imaging due to their efficacy and safety. Their utility has been proven in clinical applications with a series of marketed SPION-based contrast agents. Extensive research has been performed to study various strategies that could improve SPION by tailoring the surface chemistry and by applying additional therapeutic functionality. Research into the dual-modal contrast uses of SPION has developed because these applications can save time and effort by reducing the number of imaging sessions. In addition to multimodal strategies, efforts have been made to develop multifunctional nanoparticles that carry both diagnostic and therapeutic cargos specifically for cancer. This review provides an overview of recent advances in multimodality imaging agents and focuses on iron oxide based nanoparticles and their theranostic applications for cancer. Furthermore, we discuss the physiochemical properties and compare different synthesis methods of SPION for the development of multimodal contrast agents.     

High-Performance and Stable Perovskite Solar Cells Using Carbon Quantum Dots and Upconversion Nanoparticles

Upconversion nanoparticles (UCNPs) and carbon quantum dots (CQDs) have recently received a lot of attention as promising materials to improve the stability and efficiency of perovskite solar cells (PSCs). This is because they can passivate the surfaces of perovskite-sensitive materials and act as a spectrum converter for sunlight. In this study, we mixed and added both promising nanomaterials to PSC layers at the ideal mixing ratios. When compared to the pristine PSCs, the fabricated PSCs showed improved power conversion efficiency (PCE), from 16.57% to 20.44%, a higher photocurrent, and a superior fill factor (FF), which increased from 70% to 75%. Furthermore, the incorporation of CQDs into the manufactured PSCs shielded the perovskite layer from water contact, producing a device that was more stable than the original.     

Magnetic Iron Oxide Nanoparticles: Synthesis and Surface Functionalization Strategies

Surface functionalized magnetic iron oxide nanoparticles (NPs) are a kind of novel functional materials, which have been widely used in the biotechnology and catalysis. This review focuses on the recent development and various strategies in preparation, structure, and magnetic properties of naked and surface functionalized iron oxide NPs and their corresponding application briefly. In order to implement the practical application, the particles must have combined properties of high magnetic saturation, stability, biocompatibility, and interactive functions at the surface. Moreover, the surface of iron oxide NPs could be modified by organic materials or inorganic materials, such as polymers, biomolecules, silica, metals, etc. The problems and major challenges, along with the directions for the synthesis and surface functionalization of iron oxide NPs, are considered. Finally, some future trends and prospective in these research areas are also discussed.     

In Vitro/In Vivo Toxicity Evaluation and Quantification of Iron Oxide Nanoparticles

Increasing biomedical applications of iron oxide nanoparticles (IONPs) in academic and commercial settings have alarmed the scientific community about the safety and assessment of toxicity profiles of IONPs. The great amount of diversity found in the cytotoxic measurements of IONPs points toward the necessity of careful characterization and quantification of IONPs. The present document discusses the major developments related to in vitro and in vivo toxicity assessment of IONPs and its relationship with the physicochemical parameters of IONPs. Major discussion is included on the current spectrophotometric and imaging based techniques used for quantifying, and studying the clearance and biodistribution of IONPs. Several invasive and non-invasive quantification techniques along with the pitfalls are discussed in detail. Finally, critical guidelines are provided to optimize the design of IONPs to minimize the toxicity.     

Dual Loading of Doxorubicin and Magnetic Iron Oxide into PLA-TPGS Nanoparticles: Design,in vitro Drug Release Kinetics,and Biological Effects on Cancer Cells

The multifunctional nano drug delivery system (MNDDS) has much revolutionized in cancer treatment, aiming to eliminate many disadvantages of conventional formulations. This paper herein proposes and demonstrates MNDDS inspired by poly(lactide)-tocopheryl polyethylene glycol succinate (PLA-TPGS) copolymer co-loaded Doxorubicin and magnetic iron oxide nanoparticles (MIONs) with a 1 : 1 (w/w) optimal ratio. In vitro drug release kinetics of Doxorubicin from this nanosystem fitted best to the Weibull kinetic model and can be described by the classical Fickian diffusion mechanism under acidic pH conditions. The combination of MIONs and Doxorubicin in the PLA-TPGS copolymer has maintained the fluorescence properties of Doxorubicin and good cell penetration, especially inside the nucleus and its vicinity. Moreover, different cell cycle profiles were observed in HeLa cell lines treated with MNDDSs.     

Microwave-Assisted Synthesis of Glutathione-Capped CdTe/CdSe Near-Infrared Quantum Dots for Cell Imaging

These glutathione (GSH)-conjugated CdTe/CdSe core/shell quantum dot (QD) nanoparticles in aqueous solution were synthesized using a microwave-assisted approach. The prepared type II core/shell QD nanoparticles were characterized by UV–Vis absorption, photoluminescence (PL) spectroscopy, X-ray powder diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM). Results revealed that the QD nanoparticles exhibited good dispersity, a uniform size distribution and tunable fluorescence emission in the near-infrared (NIR) region. In addition, these nanoparticles exhibited good biocompatibility and photoluminescence in cell imaging. In particular, this type of core/shell NIR QDs may have potential applications in molecular imaging.     

基于CdSe/ZnS量子点荧光猝灭法测定硫胺素

以CdSe/ZnS量子点为荧光探针,基于硫胺素(VB1)与CdSe/ZnS量子点间通过静电作用而有效猝灭CdSe/ZnS量子点荧光强度的机制,建立了一种可快速测定VB1的荧光检测方法.在最优实验条件下(pH 7.4,反应时间25 min),硫胺素(VB1)浓度在0.01 ～1 μmol/L时,CdSe/ZnS量子点荧光猝灭变化强度与硫胺素(VB1)浓度呈良好的线性关系:F0/F=0.67cCB1+1.05(R=0.999 2),方法检出限为5.1×10-3 μmol/L,相对标准偏差为1.09％.该方法可用于人体尿样中VB1的快速测定.     

Direct Generation of Mn‐Doped ZnS Quantum Dots/Alginate Nanocomposite Beads Based on Gelation and In Situ Synthesis of Quantum Dots

Herein, a concise and novel method is developed to directly generate Mn‐doped ZnS QDs/alginate nanocomposite beads. In this method, the ionic gelation of alginate is employed to produce alginate gel beads in a solution of Zn²⁺ and Mn²⁺ ions. Subsequently, the gel beads serve as the reaction support for in situ synthesis of Mn‐doped ZnS QDs in the beads through the reaction of sodium sulfide with Zn²⁺ and Mn²⁺ ions. The method has many benefits such as the simple preparation, the environmentally friendly process, the mild conditions, and the easy post‐treatment for the beads. The resulting QDs/alginate beads are homogeneous and stable gel spheres which show clear fluorescence. TEM images demonstrate that Mn‐doped ZnS QDs are homogeneously distributed within the QDs/alginate nanocomposite, and their average size is 2.4 ± 0.3 nm. Potentially, the QDs/alginate beads can be utilized for fluorescence bioimaging, as well as fluorescence detection toward metal ions.     

二氧化锡量子点的制备、表征及缺陷研究

以SnCl4·5H2O为原料、三重蒸馏水为溶剂,结合溶胶凝胶法与水热法合成了9种不同粒径的SnO2量子点胶体及其对应的粉末颗粒。分析了不同合成条件对量子点的影响,用XRD和TEM对其粉末结构和形貌进行了表征,对SnO2纳米粒子的Uv-Vis光谱以及光致发光光谱进行了分析,计算了量子点粒径大小以及禁带宽度,并对其荧光发光机理进行了探讨。结果表明,合成的Sn02量子点的粒径为3．2～4．6nm,粒径分布均匀,分散性较好。SnO2纳米粒子光致发光在430nm、530nm和600nm处有发光峰,分别是由锡间隙、单电子氧缺陷以及表面态引起的深能级跃迁所致。     

Diagnosis of Prostate Cancer and Prostatitis Using near Infra-Red Fluorescent AgInSe/ZnS Quantum Dots

The link between the microbiome and cancer has led researchers to search for a potential probe for intracellular targeting of bacteria and cancer. Herein, we developed near infrared-emitting ternary AgInSe/ZnS quantum dots (QDs) for dual bacterial and cancer imaging. Briefly, water-soluble AgInSe/ZnS QDs were synthesized in a commercial kitchen pressure cooker. The as-synthesized QDs exhibited a spherical shape with a particle diameter of 4.5 ± 0.5 nm, and they were brightly fluorescent with a photoluminescence maximum at 705 nm. The QDs showed low toxicity against mouse mammary carcinoma (FM3A-Luc), mouse colon carcinoma (C26), malignant fibrous histiocytoma-like (KM-Luc/GFP) and prostate cancer cells, a greater number of accumulations in Staphylococcus aureus, and good cellular uptake in prostate cancer cells. This work is an excellent step towards using ternary QDs for diagnostic and guided therapy for prostate cancer.