Penalized-likelihood image reconstruction for digital holography

Conventional numerical reconstruction for digital holography using a filter applied in the spatial-frequency domain to extract the primary image may yield suboptimal image quality because of the loss in high-frequency components and interference from other undesirable terms of a hologram. We propose a new numerical reconstruction approach using a statistical technique. This approach reconstructs the complex field of the object from the real-valued hologram intensity data. Because holographic image reconstruction is an ill-posed problem, our statistical technique is based on penalized-likelihood estimation. We develop a Poisson statistical model for this problem and derive an optimization transfer algorithm that monotonically decreases the cost function at each iteration. Simulation results show that our statistical technique has the potential to improve image quality in digital holography relative to conventional reconstruction techniques.     

High-precision three-dimensional shape reconstruction via digital refocusing in multi-wavelength digital holography

Three-dimensional (3D) shape reconstructions and metrology measurements are often limited by depth-of-field constraints. Current focus-detection-based techniques are insufficient to profile out-of-focus 3D objects with high axial accuracy. Extended-focus imaging (EFI) techniques can improve the range and precision of such measurements. By incorporating digital refocusing with multiwavelength interferometry, a holographic imaging solution is presented in this paper to accurately measure 3D objects over a large depth range. Accuracy and repeatability of the proposed EFI technique are validated by digital simulations and refocusing experiments. A reconstruction example demonstrates the feasibility of high-precision 3D measurements of objects deeper than the system's classical depth of field.     

Multi-plane imaging for arbitrary reconstruction positions in digital holography

A novel method for multi-plane imaging in digital holography is proposed: holograms of objects located at various places are recorded and then reconstructed simultaneously through one-step Fresnel diffraction using the quadratic distorted phase factor (QDPF). The theory of one-step Fresnel diffraction with the QDPF is deduced and experimental results support the theoretical investigation.     

Image reconstruction only by phase data in phase-shifting digital holography

We describe data compression in phase-shifting digital holography. We demonstrate by experimentation that an image of a diffusely reflecting object can be reconstructed only by phase data of the derived complex amplitude. It is shown that reduction of the bit depth of the phase data does not seriously damage the image even down to 1 bit. We observe enhancement of halo in the image with low bit depths. This tendency is verified quantitatively by a one-dimensional simulation. Our procedure for smoothing the images that result from the data-compression methods is shown to be effective.     

Phase-error correction in digital holography

The quality of images computed from digital holograms or heterodyne array imaging is degraded by phase errors in the object and/or reference beams at the time of measurement. This paper describes computer simulations used to compare the performance of digital shearing laser interferometry and various sharpness metrics for the correction of such phase errors when imaging a diffuse object. These algorithms are intended for scenarios in which multiple holograms can be recorded with independent object speckle realizations and a static phase error. Algorithm performance is explored as a function of the number of available speckle realizations and signal-to-noise ratio (SNR). The performance of various sharpness metrics is examined in detail and is shown to vary widely. Under ideal conditions with >15 speckle realizations and high SNR, phase corrections better than lambda/50 root-mean-square (RMS) were obtained. Corrections better than lambda/10 RMS were obtained in the high SNR regime with as few as two speckle realizations and at object beam signal levels as low as 2.5 photons/speckle with six speckle realizations.     

Light-in-flight digital holography display

We present a digital speckle-pattern interferometric setup that can be operated at TV frame rates (30 ms) to display the locus of the points at which the optical-path difference between the reference and object beams is within the coherence length. Experimental results are shown.     

Parallel two-step phase-shifting digital holography

We propose a parallel two-step phase-shifting digital holography technique capable of instantaneous measurement of three-dimensional objects, with a view toward measurement of dynamically moving objects. The technique is based on phase-shifting interferometry. The proposed technique carries out the two-step phase-shifting method at one time and can be optically implemented by using a phase-shifting array device located in the reference beam. The array device has a periodic two-step phase distribution, and its configuration is simplified compared with that required for three-step and four-step parallel phase-shifting digital holographies. Therefore the optical system of the proposed technique is more suitable for the realization of a parallel phase-shifting digital holography system. We conduct both a numerical simulation and a preliminary experiment in the proposed technique. The results of the simulation and the experiment agree well with those of sequential phase-shifting digital holography, and results are superior to those obtained by conventional digital holography using the Fresnel transform alone. Thus the effectiveness of the proposed technique is verified.     

Parallel three-step phase-shifting digital holography

We propose parallel three-step phase-shifting digital holography as a technique capable of noiseless instantaneous measurement of three-dimensional objects based on phase-shifting interferometry. The proposed digital holography carries out three-step phase shifting at the same time by using a phase-shifting array device located in the reference beam. The array device has a periodic three-step phase distribution, and its configuration is simplified compared with that required for conventional parallel phase-shifting digital holography. Therefore the optical system of the proposed parallel phase-shifting digital holography is more suitable for the realization of the proposed holography. We conduct both a numerical simulation and a preliminary experiment. The results of the simulation and experiment agree well with those of the conventional phase-shifting method and are superior to the results obtained by conventional digital holography by using the Fresnel transform alone. Thus the effectiveness of the proposed technique is verified.     

数字同轴和数字离轴全息系统分析

利用最高空间频率分析法,通过逐点分析记录在 CCD 上的空间频率信息,研究了物体可允许记录的最大横向尺寸、最小记录距离、全息图的信息量、空间分辨力、再现像的横向分辨力、轴向分辨力及散斑大小,并得到了数学表达式。理论分析和实验结果表明,数字同轴全息系统放宽了对 CCD 分辨力的要求,有较高的分辨力,较低的散斑噪声、灵活、简单的系统结构及较高的 CCD 空间带宽利用率,在增强系统性能方面要优于数字离轴全息系统。这一研究为数字全息系统的设计和操作提供了一定的理论和实验指导。     

Quantitative space-bandwidth product analysis in digital holography

The space-bandwidth product (SBP) is a measure for the information capacity an optical system possesses. The two information processing steps in digital holography, recording, and reconstruction are analyzed with respect to the SBP. The recording setups for a Fresnel hologram, Fourier hologram, and image-plane hologram, which represent the most commonly used setup configurations in digital holography, are investigated. For the recording process, the required SBP to ensure the recording of the entire object information is calculated. This is accomplished by analyzing the recorded interference pattern in the hologram-plane. The paraxial diffraction model is used in order to simulate the light propagation from the object to hologram-plane. The SBP in the reconstruction process is represented by the product of the reconstructed field-of-view and spatial frequency bandwidth. The outcome of this analysis results in the best SBP adapted digital holographic setup.     

Effects of quantization in phase-shifting digital holography

We discuss quantization effects of hologram recording on the quality of reconstructed images in phase-shifting digital holography. We vary bit depths of phase-shifted holograms in both numerical simulation and experiments and then derived the complex amplitude, which is subjected to Fresnel transformation for the image reconstruction. The influence of bit-depth limitation in quantization has been demonstrated in a numerical simulation for spot-array patterns with linearly varying intensities and a continuous intensity object. The objects are provided with uniform and random phase modulation. In experiments, digital holograms are originally recorded at 8 bits and the bit depths are changed to deliver holograms at bit depths of 1 to 8 bits for the image reconstruction. The quality of the reconstructed images has been evaluated for the different quantization levels.     

Applications of short-coherence digital holography in microscopy

We present an optical system based on short-coherence digital holography suitable for the imaging of three-dimensional microscopic objects. The short temporal coherence properties of the light source allow optical sectioning of the sample. Proper reconstruction of different layers within biological samples is possible up to a depth of a few hundred micrometers, but multiple scattering and inhomogeneities in the refractive index reduce the imaging quality for deeper layers. We have studied the possibility of numerically correcting sample-induced aberrations, and we now propose a method of improving image quality. Numerical simulations and preliminary experimental results show that compensation of these aberrations is possible to some extent.     

小波变换在数字全息中的应用

数字全息是通过数字重构来同时获取被测物强度与相位,但记录时的激光散斑效应和重构时的零级衍射斑成为了这种方法的瓶颈。将小波变换引入数字全息,可直接消除零级衍射像,无需相移,也不需要采集多幅图像;小波非线性滤波器还可消除散斑噪声。模拟和实验结果表明,小波分析的引入,可以消除零级衍射影响,改善图像质量,提高测试分辨率。     

Digital holography using a digital photo-camera

The possibilities of running digital holography using commonly available digital zoom photo-cameras are studied. A new modified method of the holographic set-up exploiting the properties of a photo-camera is suggested. This method offers a straightforward and simple way of both digital hologram recording and reconstructing. In order to verify the feasibility of the method, the holograms acquired are digitally reconstructed using a computer code based on the fast Fourier transform algorithm. Experimental results obtained are presented and discussed.     

Full-field vibrometry with digital Fresnel holography

A setup that permits full-field vibration amplitude and phase retrieval with digital Fresnel holography is presented. Full reconstruction of the vibration is achieved with a three-step stroboscopic holographic recording, and an extraction algorithm is proposed. The finite temporal width of the illuminating light is considered in an investigation of the distortion of the measured amplitude and phase. In particular, a theoretical analysis is proposed and compared with numerical simulations that show good agreement. Experimental results are presented for a loudspeaker under sinusoidal excitation; the mean quadratic velocity extracted from amplitude evaluation under two different measuring conditions is presented. Comparison with time averaging validates the full-field vibrometer.     

Simultaneous two-wavelength Doppler phase-shifting digital holography

This paper presents a method based on the use of an image sensor for obtaining the complex amplitudes of beams diffracted from an object at two different wavelengths. The complex amplitude for each wavelength is extracted by the Doppler phase-shifting method. The principle underlying the proposed method is experimentally verified by using the method with two lasers having different wavelengths to measure the surface shape of a concave mirror.     

Remote metrology by comparative digital holography

A method for the remote comparison of objects with regard to their shape or response to a load is presented. The method allows interferometric sensitivity for comparing objects with different microstructure. In contrast to the well-known incoherent techniques based on inverse fringe projection this new approach uses the coherent optical wave field of the master object as a mask for the illumination of the sample object. The coherent mask is created by digital holography to allow instant access to the complete optical information of the master object at any place desired. The mask is reconstructed by a spatial light modulator (SLM). The optical reconstruction of digital holograms with SLM technology allows modification of reconstructed wavefronts with respect to improvement of image quality, the skilled introduction of additional information about the object (augmented reality), and the alignment of the master and test object.     

Encrypting three-dimensional information with digital holography

A method for optical encryption of three-dimensional (3D) information by use of digital holography is presented. A phase-shifting interferometer records the phase and amplitude information generated by a 3D object at a plane located in the Fresnel diffraction region with an intensity-recording device. Encryption is performed optically by use of the Fresnel diffraction pattern of a random phase code. Images of the 3D object with different perspectives and focused at different planes can be generated digital or optically after decryption with the proper key. Experimental results are presented.     

Phase-shifting digital holography with a low-coherence light source for reconstruction of a digital relief object hidden behind a light-scattering medium

Hiding image data with a light-scattering medium is effective as a basic data protection technique. The hidden image data can be observed only by using a low-coherence interference technique and is thus protected from unauthorized access. Unlike an intensity-distributed object, a digital relief object has no intensity distribution, making it possible to hide its existence by using a dilute light-scattering medium. To reconstruct the digital relief object through the light-scattering medium, we developed phase-shifting digital holography with a low-coherence light source. The experimental performance, including the spatial resolution and phase error of the reconstructed image, is estimated.