Variations of the glass‐transition temperature in the imidization of poly(styrene‐co‐maleic anhydride)

The imidization of poly(styrene‐co‐maleic anhydride) (SMA) was conducted, and the glass‐transition temperatures (T_g's) of the resulting products were measured with differential scanning calorimetry. The contributions from functional groups of maleic anhydride, N‐phenylmaleamic acid, and N‐phenylmaleimide to T_g were examined. T_g increased in the order of SMA < styrene–N‐phenyl maleimide copolymer < styrene–N‐phenyl maleamic acid copolymer and followed the Fox equation. T_g of the imidized products of SMA could be controlled by the conversions of both ring‐opening and ring‐closing reactions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2418–2422, 2007     

Preparation of styrene‐maleic acid copolymers and its application in encapsulated pigment red 122 dispersion

Styrene‐maleic acid copolymers were synthesized by free radical polymerization. Encapsulated pigment red 122 dispersions were prepared by sedimentation with these copolymers. Effects of copolymer structure such as molar content of maleic acid, molecular weight, and the amount of copolymers on stability and particle size of dispersion were investigated. The results showed that encapsulated pigment dispersion with higher stability, smaller particle size, and narrower particle distribution could be achieved when the molar content of maleic acid was at 0.43 and the intrinsic viscosity was at 79.65 ml/g with amount of copolymers 10%. The encapsulated layer was about 5 nm which could be observed by TEM. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Phase structure and morphology of wollastonite‐reinforced polypropylene composites modified with SEBS and SEBS‐g‐MA elastomers

Supermolecular structure of isotactic polypropylene/wollastonite/styrenic rubber block copolymers composites were studied as a function of elastomeric poly‐ (styrene‐b‐ethylene‐co‐butylene‐b‐styrene) triblock copolymer (SEBS) and the SEBS grafted with maleic anhydride (SEBS‐g‐MA) content (from 0 to 20 vol%) by optical, scanning, and transmission electron microscopy, wide‐angle X‐ray diffraction and differential scanning calorimetry. Wollastonite particles disturbed the spherulitization of polypropylene matrix. Both elastomers affected the crystallization of polypropylene matrix mainly by solidification effect. Although SEBS‐g‐MA encapsulated wollastonite particles more expressive than SEBS forming thus core‐shell morphology in higher extent, scanning electron micrographs indicated more constrained wollastonite particles in fractured surfaces of composites with SEBS elastomer. Moreover, SEBS‐g‐MA disorientated wollastonite particles and affected reorientation of the polypropylene crystallites stronger than SEBS elastomer. POLYM. ENG. SCI., 47:2145–2154, 2007. © 2007 Society of Plastics Engineers     

Synthesis and characterization of alkali‐modified styrene‐maleic anhydride copolymer for dispersion of TiO2

A copolymer of styrene and maleic anhydride was synthesized by free radical polymerization at 80°C using N,N‐dimethylformamide (DMF) as solvent and benzoylperoxide as initiator. The monomer feed ratio of styrene to maleic anhydride was varied in the range of 1 : 1 : to 3 : 1. The polymer yield was found to decrease with increase in styrene in the feed. The molecular weight of copolymers which were formed by taking styrene to maleic anhydride ratio of 1 : 1, 2 : 1, and 3 : 1, as determined by Ostwald Viscometery were about 1862, 2015, and 2276 respectively. The acid values of abovementioned three copolymers were found to be 480, 357, and 295, respectively. The typical viscosity values of 20% solids in ammonical solution of copolymers formed by taking feed ratios of Sty : MAn as 1 : 1 and 2 : 1 were 26 and 136 cp, respectively. For the feed ratio 3 : 1, a gel was formed. The synthesized copolymers were hydrolyzed by alkalis, namely, NaOH, KOH, and NH₄OH. The dispersing ability of hydrolyzed styrene‐maleic anhydride (SMA) copolymers for dispersion of titanium dioxide was studied. The modified SMA copolymers were found to be effective dispersants for TiO₂. Among the three alkalis studied, the Sodium salts of SMA were found to give better dispersion. The copolymer having a 1 : 1 feed ratio showed the best dispersing ability for TiO₂ particles among the three ratios studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3194–3205, 2007     

Encapsulation of disperse dye by phase separation technique using poly(styrene‐maleic acid)

C.I. disperse dye blue 60 was encapsulated by poly(styrene‐maleic acid) using phase separation technique, followed by the preparation of the encapsulated disperse dye dispersion. The effects of process conditions on particle size of the dispersion were investigated. The results showed that the particle size of the encapsulated disperse dye dispersion was small, and the stability was excellent when mass ratio of poly(styrene‐maleic acid) to disperse dye (R_p/d), dropping speed of phase separation agent (D_s), disperse dye content in dispersion (C_d), and dispersing time (D_t) were about 20%, 7 mL/min, 5–7.5%, and 1.5 h, respectively. Transmission electron microscope (TEM), zeta potentials, and contact angle indicated that C.I. disperse dye blue 60 was successfully encapsulated by poly(styrene‐maleic acid). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Properties of copper phthalocyanine blue encapsulated with a copolymer of styrene and maleic acid

Copper phthalocyanine blue was encapsulated with a copolymer of styrene and maleic acid (PSMA) via a phase‐separation technique, and a PSMA‐encapsulated pigment dispersion was prepared. The effects of the additive on the stability of the dispersion were studied. Scanning electron microscopy photographs revealed that the particles in the PSMA‐encapsulated pigment dispersion were more uniform than those in a PSMA‐dispersed pigment dispersion. X‐ray photoelectron spectroscopy provided evidence that the PSMA‐encapsulated pigment acquired abundant carboxylic groups that could improve its wettability to water. Moreover, the results also indicated that the PSMA‐encapsulated pigment dispersion had improved color strength, its stability could be greatly influenced by the pH value and ion strength, and its apparent viscosity changed little with an increase in the shear rate. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Functional polymers for colloidal applications. XIV. Syntheses of styrene–maleic anhydride copolymers with different charges and their ability to disperse kaolinite particles

Four kinds of styrene/maleic–anhydride (SMA) copolymer‐derived dispersants with different charged forms were synthesized and characterized with ¹H‐NMR. These four different dispersants contained carboxylic acid groups and exhibited characteristics indicative of anionic, cationic, zwitterionic, or nonionic surfactants as pH was changed. The charge properties of these copolymers changes with pH, and their ability to disperse clay particles under low and high pH were assessed by measuring viscosity or sedimentation, as well as Scanning Electron Microscopy (SEM). The results showed that the dispersing abilities are functions of pH of the system. It was found that SMA‐N [Poly(styrene‐co‐β‐N,N‐dimethylpropylamino) maleic acid, sodium salt)] exhibits the best dispersing ability, the fastest rate of sedimentation, and the smallest sedimentation volume at pH = 2, and SMA‐Na [poly(styrene‐co‐maleic acid, disodium salt)] exhibits the better dispersing ability at pH = 7 and 12. In addition, the aggregation behavior of the dispersants characterized by fluorescence spectroscopy revealed that the degree of aggregation for all dispersants at high concentration increases in the order: SMA‐Na < SMA‐B [poly(styrene‐co‐B‐imino‐propyl‐N‐trimethylammonium acetate) maleic acid, disodium salt)] < SMA‐N < SMA‐Q [poly(styrene‐co‐β‐imino‐propyl‐N‐trimethylammonium sulfate) maleic acid, sodium salt)]. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 592–602, 2000     

Colloidal properties of copolymer‐encapsulated and surface‐modified pigment dispersion and its application in inkjet printing inks

A styrene–maleic acid copolymer (PSMA)‐encapsulated 2‐[(2‐methoxy‐4‐nitrophenyl) azo]‐N‐(2‐methoxyphenyl)‐3‐oxobutyramide (PY74) dispersion was prepared by the phase‐separation technique. A surface‐modified PY74 dispersion was prepared with PSMA sodium as a dispersant by the milling method. Furthermore, the two dispersions were applied to formulate pigment inks. The colloidal properties of these two dispersions were compared. The printing and color performance of the prepared inks were also investigated. The results show that the PSMA‐encapsulated PY74 dispersion with a small particle size had higher stabilities of NaCl concentration, pH value, and temperature than the surface‐modified PY74 dispersion. The apparent viscosity of the PSMA‐encapsulated PY74 dispersion changed little, while it changed greatly in the surface‐modified PY74 dispersion with an increase of the shear rate from 10 to 100 s⁻¹. The ink printing and color performance of printed Fabrics indicated that the PSMA‐encapsulated PY74 dispersion was more suitable for the preparation of inkjet printing ink than the surface‐modified PY74 dispersion. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Formation of thermosensitive copolymer beads having phosphinic acid groups and adsorption ability for metal ions

Hydrophilic thermosensitive copolymer beads having phosphinic acid groups were prepared by suspension copolymerization of acryloyloxypropyl n‐octylphosphinic acid (APPO), N‐isopropyl acrylamide (NIPAAm), and tetraethyleneglycol dimethacrylate (4G). The thermosensitivity and the adsorption ability of the copolymer beads for metal ions beads were studied. The APPO‐NIPAAm‐4G copolymer beads were obtained in a good yield by suspension copolymerization of monomers (APPO, NIPAAm, and 4G) dissolved in chloroform, in a saturated Na₂SO₄ aqueous solution in the presence of surfactant and MgCO₃. The APPO‐NIPAAm‐4G copolymer beads had higher adsorption ability for lanthanide metal ions (Eu³⁺, Sm³⁺, Nd³⁺, or La³⁺) than for main transition metal ions (Cu²⁺, Ni²⁺, or Co²⁺). Furthermore, it was also found that the APPO‐NIPAAm‐4G copolymer beads had selective adsorption ability between lanthanide metal ions, and the order of adsorption ability for lanthanide metal ions was as follows: Eu³⁺ > Sm³⁺ > Nd³⁺ > La³⁺. The selective adsorption for these metal ions from their mixed solutions was performed by both a batch method and a column method. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 449–460, 2006     

Poly(sulfobetaine)s and corresponding cationic polymers. IX. Synthesis and aqueous solution properties of zwitterionic poly(sulfobetaine) derived from a styrene–N,N‐dimethylaminopropyl maleamidic acid copolymer

A styrene–N,N‐dimethyl(maleamidic acid)propyl ammonium propane sulfonate (SDMMAAPS) copolymer was synthesized through an amidoacidation reaction of a styrene–maleic anhydride alternating copolymer with N,N‐dimethylaminopropylamine (ring‐opening reaction) and then reacted with propane sultone. The cloud point and minimum salt concentration (msc) of this ampholytic SDMMAAPS copolymer were determined in aqueous salt solutions. The effects of counterions on the cloud point and msc of SDMMAAPS were not entirely the same as those of other zwitterionic poly(sulfobetaine)s. The greatest difference from other poly(sulfobetaine)s, such as styrene–N,N‐dimethyl(maleimido propyl)ammonium propane sulfonate copolymers, was the carboxylic group on the polymer chain unit of SDMMAAPS. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1884–1889, 2003     

Poly(sulfobetaine)s and corresponding cationic polymers. X. Viscous properties of zwitterionic poly(sulfobetaine) derived from styrene–(N,N‐dimethylaminopropyl maleamidic acid) copolymer in aqueous salt solutions

A styrene–[N,N‐dimethyl (maleamidic acid) propyl ammonium propane sulfonate] (SDMMAAPS) copolymer was synthesized through an amidoacidation reaction of styrene–maleic anhydride (SMA) alternating copolymer with N,N‐dimethylaminopropylamine (ring‐opening reaction), which was then reacted with propane sultone. The effect of various salt solutions on the intrinsic viscosity of this ampholytic ADMMAAPS copolymer was investigated. The results showed that the effect of counter ions on the intrinsic viscosity of SDMMAAPS was not entirely similar to that of other zwitterionic poly(sulfobetaine)s. The greatest difference from other poly(sulfobetaine)s is the carboxylic group on the polymer chain unit of SDMMAAPS. The Huggins constants for SDMMAAPS in aqueous salt solutions, however, were also quite different from those of other sulfobetaine copolymers, such as styrene–N,N‐dimethyl (maleimido propyl) ammonium propane sulfonate] (SDMMAPS) copolymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 726–734, 2004     

Relationship between interfacial tension and dispersed‐phase particle size in polymer blends. II. PP/PA6

Simple blends with different viscosity ratios of the components as well as compatibilized blends varying both in type and content of the compatibilizers were used to study the relation between the interfacial tension and the dispersed‐phase particle size for PP/PA6 (80/20 wt %) blends in this work. Four compatibilizing systems including poly(ethylene‐co‐methacrylic acid) ionomers, a maleic anhydride‐grafted propylene copolymer, maleic anhydride‐grafted polypropylene, and a maleic anhydride‐grafted styrene ethylene butylene copolymer were used. For blends prepared in an internal mixer, a power‐law relation was found between the capillary number and the torque ratio of the blends' components. This relation was used to estimate the interfacial tension for the compatibilized blends. The relation between the steady‐state torque of the blends as a measure of viscosity and the estimated values of interfacial tension were also investigated. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 54–63, 2003     

Preparation of bimodal porous copolymer containing β‐cyclodextrin and its inclusion adsorption behavior

A novel insoluble bimodal porous polymer containing β‐cyclodextrin (β‐CD) was prepared to adsorb aromatic amine compound. The process involved copolymerization of styrene and methyl methacrylate with a maleic acid derivative of β‐CD, subsequently, above formed copolymer was foamed by supercritical CO₂. The chemical properties and physical structure of obtained copolymer was analyzed using Fourier transform infrared spectra, Thermal gravimetric analysis, X‐ray diffraction, scanning electron microscope, and N₂ adsorption techniques. The inclusion adsorption of aromatic amine compounds on β‐CD copolymer was carried out in a batch system. The quantities of aromatic amine compounds adsorbed on β‐CD copolymer reached equilibrium within 60 min. The adsorption kinetic could be fitted to a pseudo‐second‐order kinetic equation, and the linear correlation coefficients varied from 0.9828 to 0.9935. With the influence of molecular structure and hydrophobicity of the aromatic amine compound, the sequence of quantity of aromatic amine compounds adsorbed on β‐CD copolymer is p‐toluidine > aniline > benzidine > o‐toluidine. The adsorption equilibrium data of aromatic amine compound adsorbed on β‐CD copolymer were fitted to Freundlich and Langmuir models, respectively. The linear correlation coefficients of Langmuir model varied from 0.9516 to 0.9940, and the linear correlation coefficients of Freundlich varied from 0.9752 to 0.9976. It is concluded that Freundlich model fits better than Langmuir model, because the adsorption of aromatic amine compound on β‐CD copolymer is a chemical process. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of various added compatibilizers on the crystalline structure of polypropylene homopolymer/polybutylene terephthalate and polypropylene copolymer/polybutylene terephthalate polymer blends

Blends of semicrystalline isotactic polypropylene homopolymer and polypropylene copolymer with polybutylene terephthalate with different compatibilizers [i.e., styrene acrylonitrile, Surlyn, styrene–ethylene–butadiene styrene (SEBS), block copolymer and SEBS block copolymer grafted with maleic anhydride] were prepared by melt blending. Wide angle‐X‐ray scattering patterns of injection moldings were obtained. The crystallinity index and d‐spacing were calculated with different concentrations of different compatibilizers. X‐ray results in the structural investigation of the compatibilized blends correlated well with the different compatibilizer concentrations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1190–1193, 2003     

Preparation of spherical polymer beads of maleic anhydride–styrene–divinylbenzene and metal sorption of its derivatives

Compounds having acid anhydride moiety have been used for starting materials for many useful derivatives. Spherical crosslinked polymer beads of porous maleic anhydride–styrene–divinylbenzene copolymer are obtained by suspension polymerization. Glycerol is found to be a preferable dispersant to make spherical beads. The beads contained 93% of the anhydride and 7% of the free carboxyls. As one of applications, the beads were hydrolyzed or reacted with anhydrous hydrazine, and the metal sorption behavior of them was examined. The hydrolyzed beads show a similar sorption manner as a conventional cation exchange resin having carboxylic acid groups, but the hydrazide beads sorbed mercury (II) selectively over a wide pH range. This investigation suggests a simple preparative method for the insoluble spherical porous beads of the maleic anhydride copolymer.     

Poly(sulfobetaine)s and corresponding cationic polymers. VIII. Synthesis and aqueous solution properties of a cationic poly(methyl iodide quaternized styrene–n,n‐dimethylaminopropyl maleamidic acid) copolymer

A cationic poly(methyl iodide quaternized styrene–N,N‐dimethylaminopropylmaleamidic acid) copolymer was synthesized through amidoacidification reaction of styrene‐maleic anhydride copolymer with N,N‐dimethylaminopropylamine (ring‐opening reaction). Its properties in various aqueous salt solutions and pH solutions were studied by measurements of reduced viscosity and intrinsic viscosity. The results indicated that the reduced viscosity and intrinsic viscosity of this cationic polyelectrolyte were related to the type and concentration of the added salts and the results also showed a contrary tendency in some salts with monovalent acid groups to polyelectrolyte. At the same time, some salt ions were observed to strongly attract the quaternary ammonium group of the cationic polymeric side chain and resulted in agglomeration of the polymers. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1619–1626, 2001     

Preparation of HDPE/SEBS‐g‐MAH and its effect on mechanical properties of HDPE/wood flour composites

In this article, high density polyethylene/styrene‐ethylene‐butylene‐styrene block copolymer blends (HDPE/SEBS) grafted by maleic anhydride (HDPE/SEBS‐g‐MAH), which is an effective compatibilizer for HDPE/wood flour composites was prepared by means of torque rheometer with different contents of maleic anhydride (MAH). The experimental results indicated that MAH indeed grafted on HDPE/SEBS by FTIR analysis and the torque increased with increasing the content of maleic anhydride and dicumyl peroxide (DCP). Styrene may increase the graft reaction rate of MAH and HDPE/SEBS. When HDPE/SEBS MAH was added to HDPE/wood flour composites, tensile strength and flexural strength of composites can reach 25.9 and 34.8 MPa in comparison of 16.5 and 23.8 MPa (without HDPE/SEBS‐g‐MAH), increasing by 157 and 146%, respectively. Due to incorporation of thermoplastic elastomer in HDPE/SEBS‐g‐MAH, the Notched Izod impact strength reached 5.08 kJ m^?2, increasing by 145% in comparison of system without compatibilizer. That HDPE/SEBS‐g‐MAH improved the compatibility was also conformed by dynamic mechanical measurement. Scanning electron micrographs provided evidence for strong adhesion between wood flour and HDPE matrix with addition of HDPE/SEBS‐g‐MAH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Amphiphilic styrene–butadiene–styrene triblock copolymer grafted with polyoxyethylene

A styrene–butadiene–styrene triblock copolymer (SBS) was grafted with polyoxyethylene via a ring‐opening reaction of an epoxidized styrene–butadiene– styrene triblock copolymer (ESBS) with monocarboxylic‐group‐terminated methoxypoly(ethylene glycol) (CMPEG). The latter was prepared through the esterification of methoxypoly(ethylene glycol) with maleic anhydride. The optimum conditions for the preparation of the graft copolymer were studied. The graft copolymer was characterized with Fourier transform infrared spectrophotometry. Its water absorbency, oil absorbency, emulsifying property, phase‐transfer catalysis property in the Williamson solid–liquid reaction, and use as a compatibilizer in the blending of SBS with oil‐resistant chlorohydrin rubber (CHR) were also studied. The optimum conditions were a CMPEG/epoxy group molar ratio of 1.5, an N,N‐dimethyl aniline/ESBS concentration of 5 wt %, and an ESBS concentration of 12–14 g/100 mL at 75–80°C for 10 h. The polyoxyethylene content could reach 0.27 mmol/g. The graft copolymer absorbed a certain amount of water, fairly resisted kerosene, and possessed good emulsifying and phase‐transfer catalysis properties, both of which were enhanced with increasing polyoxyethylene graft content. The graft copolymer could be used as a compatibilizer for a blend of SBS and CHR. A 3 wt % concentration of the graft copolymer based on a 50/50 blend could increase both the tensile strength and ultimate elongation of the blend about 1.7 times. The blend behaved like an oil‐resistant thermoplastic elastomer. Scanning electron microscopy demonstrated the improved compatibility of the two components by the graft copolymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Compatibility effect of reactive copolymers on polypropylene/polyamide 6 blends from commingled plastic wastes

We report the compatibility effect on a recycled polypropylene/nylon (75/25) blend processed with reactive copolymers on the basis of morphological, mechanical, and rheological characteristics. Via a scanning electron microscopy investigation, we found improved surface morphologies with regular and fine domains in a recycled polypropylene/nylon (75/25) blend compatibilized with copolymers containing maleic anhydride as a reactive functional group [styrene–(ethylene/butylene)–styrene‐graft‐maleic anhydride copolymer and polypropylene‐graft‐maleic anhydride]. Large increases in both the mechanical and rheological properties with the addition of the styrene–(ethylene/butylene)–styrene‐graft‐maleic anhydride copolymer could be interpreted with respect to a specific structure at the interface, showing a strong interfacial adhesion between recycled polypropylene and nylon. To confirm the existence of this structure, we used various dynamic rheological parameters: the Cox–Merz rule, storage modulus, and phase angle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1188–1193, 2006     

Properties of modified poly(vinyl alcohol) membranes prepared by the grafting of new polyelectrolyte copolymers for water–ethanol mixture separation

For the preparation of a water‐selective membrane for the pervaporation separation of an azeotropic solution, a series of grafted copolymers were synthesized by the reaction of poly(vinyl alcohol) (PVA) with poly(sodium salt styrene sulfonic acid‐co‐maleic acid) (PSStSA‐co‐MA). The esterification was performed between the hydroxyl groups of PVA and the carboxylic groups of the copolymer with a heat treatment. PSStSA‐co‐MA was prepared with sodium salt styrene sulfonic acid and maleic anhydride copolymerization in dimethyl sulfoxide with azobisisobutyronitrile as an initiator. The reaction mechanism and resultant structure were confirmed with IR spectra. The effect of the heat‐treatment time on the gel content was investigated. The permeation flux decreased and the separation factor increased as the crosslinking agent content rose. A membrane containing 15 wt % PSStSA‐co‐MA was used for water–ethanol azeotropic solution pervaporation at 30°C, and a flux of 0.43 kg/m² h and a separation factor of 190 were obtained. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2854–2859, 2002