Dynamic rheological and morphological study of the compatibility of thermoplastic polyurethane/ethylene–octene copolymer blends

Two grafted ethylene–octene copolymers [POEs; i.e., POE‐g‐maleic anhydried (MAH) and aminated POE (denoted by POE‐g‐NH₂) were used as compatibilizers in immiscible blends of thermoplastic polyurethane (TPU) and POE. The effects of the compatibilizers on the dynamic rheological properties and morphologies of the TPU/POE blends were investigated. The characteristic rheological behaviors of the blends indicated that the strong interactions between the two phases were due to the compatibilization. Microstructural observation confirmed that the compatibilizers were located at the interface in the blends and formed a stable interfacial layer and smaller dispersed phase particle size. Compared with POE‐g‐MAH, POE‐g‐NH₂ exhibited a better compatibilization effect in the TPU/POE blends. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The study of morphology,thermal and thermo‐mechanical properties of compatibilized TPU/SAN blends

The compatibilizing efficiency of three different compatibilizers in thermoplastic polyurethane/styrene‐co‐acrylonitrile (TPU/SAN) blends was investigated after their incorporation via melt‐mixing. The compatibilizers studied were poly‐ε‐caprolactone (PCL), a mixture of polystyrene‐block‐polycaprolactone (PS‐b‐PCL) and polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA), and a mixture of polyisoprene‐block‐polycaprolactone (PI‐b‐PCL) and polybutadiene‐block‐poly(methyl methacrylate) (PB‐b‐PMMA). All compatibilizers were synthesized by living anionic polymerization. Investigations of thermal and thermo‐mechanical properties performed by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DTMA), respectively, were systematically classified into two groups, i.e. blends of TPU or SAN with 20 wt% of different compatibilizers (so‐called limit conditions) and TPU/SAN 25/75 blends with 5 wt% of different compatibilizers. In order to determine the compatibilizer's location, morphology of TPU/SAN 25/75 blends was studied with transmission electron microscopy (TEM). Different compatibilization activity was found for different systems. Blends compatibilized with PCL showed superior properties over the other blends. Polym. Eng. Sci. 44:838–852, 2004. © 2004 Society of Plastics Engineers.     

Polyoxymethylene/thermoplastic polyurethane blends compatibilized with multifunctional chain extender

Novel compatibilized polyoxymethylene/thermoplastic polyurethane (POM/TPU) blends are successfully developed using multifunctional chain extender, Joncryl ADR‐4368, as the compatibilizer. The outstanding compatibilization efficiency of Joncryl on POM/TPU blend was demonstrated by its even higher mechanical properties with only 0.5 wt % of Joncryl than those with 5 wt % of three commonly used compatibilizers. Addition of only 0.5 wt % Joncryl can double the impact strength and significantly improve its tensile strength and flexural strength for POM/TPU (75/25) blend. SEM images show that Joncryl can reduce TPU particle size and enhance the interfacial interactions between POM and TPU. The interparticle distance of TPU in POM/TPU/Joncryl blends was calculated as 0.2 μm, quite close to the critical matrix ligament thickness of POM/TPU blends (0.18 μm). The impact force profile vividly shows that the addition of Joncyl in POM/TPU blends can dramatically increase the total impact energy absorbed by this blend system and enhance the interfacial interactions between POM and TPU. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Study on the microstructures and mechanical behaviour of compatibilized polypropylene/polyamide‐6 blends

A series of blends of polypropylene (PP)–polyamide‐6 (PA6) with either reactive polyethylene–octene elastomer (POE) grafted with maleic anhydride (POE‐g‐MA) or with maleated PP (PP‐g‐MA) as compatibilizers were prepared. The microstructures and mechanical properties of the blends were investigated by means of tensile and impact testing and by scanning electron microscopy and transmission electron microscopy. The results indicated that the miscibility of PP–PA6 blends was improved with the addition of POE‐g‐MA and PP‐g‐MA. For the PP/PA6/POE‐g‐MA system, an elastic interfacial POE layer was formed around PA6 particles and the dispersed POE phases were also observed in the PP matrix. Its Izod impact strength was four times that of pure PP matrix, whilst the tensile strength and Young's modulus were almost unchanged. The greatest tensile strength was obtained for PP/PA6/PP‐g‐MA blend, but its Izod impact strength was reduced in comparison with the pure PP matrix. © 2002 Society of Chemical Industry     

Investigation of structure and mechanical properties of toughened poly(l‐lactide)/thermoplastic poly(ester urethane) blends

In this study, poly(l ‐lactide) (PLA) is melt‐blended with thermoplastic polyurethane (TPU) to modify the brittleness of PLA. An aliphatic ester‐based TPU was selected in order to have an ester sensitivity for degradation and an inherent biocompatibility. Using this compatible TPU, there was no need to apply problematic compatibilizers, so the main positive properties of PLA such as biocompatibility and degradability were not challenged. The detected microstructure of PLA/TPU blends showed that when the TPU content was lower than 25 wt %, the structure appeared as sea‐islands, but when the TPU content was increased, the morphology was converted to a cocontinuous microstructure. A higher interfacial surface area in the blend with 25 wt % TPU (PLA25) resulted in a higher toughness and abrasion resistance. The various analyses confirmed interactions and successful coupling of two phases and confirmed that melt‐blending of PLA with the aliphatic ester‐based TPU is a convenient, cost‐effective, and efficient method to conquer the brittleness of PLA. The prepared blends are general‐purpose plastics, but PLA25 showed an optimum mechanical strength, toughness, and biocompatibility suitable for a wide range of applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43104.     

Study of morphology influence on rheological properties of compatibilized TPU/SAN blends

The compatibilizing efficiency of three different compatibilizers on the thermoplastic polyurethane/styrene‐co‐acrylonitrile (TPU/SAN) blends properties was investigated after compatibilizer's incorporation via melt‐mixing. The compatibilizers studied were as follows: poly‐ε‐caprolactone (PCL) of different molecular weight (M_w), a mixture of polystyrene‐block‐polycaprolactone (PS‐b‐PCL) and polystyrene‐block‐poly (methyl methacrylate) (PS‐b‐PMMA), and a mixture of polyisoprene‐block‐polycaprolactone (PI‐b‐PCL) and polybutadiene‐block‐poly (methyl methacrylate) (PB‐b‐PMMA). In our study, the effect of 5 wt % added compatibilizers on TPU/SAN blends morphology was examined. The transmission electron microscopy (TEM) was used to study the morphology at different length scales and to determine the compatibilizer's location. Investigations showed the different improvement of properties, because of the different incorporation of compatibilizers in the polymer blend. The morphology influence on the rheological behavior of compatibilized blends was investigated with a stress‐controlled rheometer (Rheometric Dynamic Stress Rheometer, SR‐500). Different compatibilization activity was found for different system. It was also found that compatibilization activity of added compatibilizer strongly depends on the comaptibilizer's M_w. Blends compatibilized with PCL showed superior properties as compared with the other examined blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2303–2316, 2006     

Effect of interfacial interaction on the crystallization and mechanical properties of PP/nano‐CaCO3 composites modified by compatibilizers

To investigate the effect of interfacial interaction on the crystallization and mechanical properties of polypropylene (PP)/nano‐CaCO₃ composites, three kinds of compatibilizers [PP grafted with maleic anhydride (PP‐g‐MA), ethylene–octene copolymer grafted with MA (POE‐g‐MA), and ethylene–vinyl acetate copolymer grafted with MA (EVA‐g‐MA)] with the same polar groups (MA) but different backbones were used as compatibilizers to obtain various interfacial interactions among nano‐CaCO₃, compatibilizer, and PP. The results indicated that compatibilizers encapsulated nano‐CaCO₃ particles, forming a core–shell structure, and two interfaces were obtained in the compatibilized composites: interface between PP and compatibilizer and interface between compatibilizer and nano‐CaCO₃ particles. The crystallization and mechanical properties of PP/nano‐CaCO₃ composites were dependent on the interfacial interactions of these two interfaces, especially the interfacial interaction between PP and compatibilizer. The good compatibility between PP chain in PP‐g‐MA and PP matrix improved the dispersion of nano‐CaCO₃ particles, favored the nucleation effect of nano‐CaCO₃, increased the tensile strength and modulus, but reduced the ductility and impact strength of composites. The partial compatibility between POE in POE‐g‐MA and PP matrix had little effect on crystallization and mechanical properties of PP/nano‐CaCO₃ composites. The poor compatibility between EVA in EVA‐g‐MA and PP matrix retarded the nucleation effect of nano‐CaCO₃, and reduced the tensile strength, modulus, and impact strength. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of the compatibilizer on the morphology and properties of dynamically cured PP/POE/epoxy blends

Dynamic vulcanization was successfully applied to epoxy resin reinforced polypropylene (PP)/ethylene‐octene copolymer (POE) blends, and the effects of different compatibilizers on the morphology and properties of dynamically cured PP/POE/epoxy blends were studied. The results show that dynamically cured PP/POE/epoxy blends compatibilized with maleic anhydride‐grafted polypropylene (MAH‐g‐PP) have a three‐phase structure consisting of POE and epoxy particles dispersed in the PP continuous phase, and these blends had improved tensile strength and flexural modulus. While using maleic anhydride‐grafted POE (MAH‐g‐POE) as a compatibilizer, the structure of the core‐shell complex phase and the PP continuous phase showed that epoxy particles could be embedded in MAH‐g‐POE in the blends, and gave rise to an increase in impact strength, while retaining a certain strength and modulus. DSC analysis showed that the epoxy particles in the blends compatibilized with MAH‐g‐PP were more efficient nucleating agents for PP than they were in the blends compatibilized with MAH‐g‐POE. WAXD analysis shows that compatibilization do not disturb the crystalline structure of PP in the blends. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Interaction of thermoplastic polyurethane with polyamide 1212 and its influence on the thermal and mechanical properties of TPU/PA1212 blends

To improve the heat resistance of polyester‐based thermoplastic polyurethane (TPU), in the present work, polyamide 1212 (PA1212) was chosen as a modifier and a series of TPU/PA1212 blends with different compositions were prepared using a twin screw extruder. The solubility parameters, characteristic of chemical structures, hydrogen‐bonding interaction, as well as interfacial tension of the single component and blends were taken into account to describe the good compatibility of TPU/PA1212 blends. The effect of PA1212 content on the rheological behaviors, morphology, mechanical, and thermal properties of TPU/PA1212 blends were systematically investigated with scanning electron microscope, tensile strength measurement, thermal gravimetry analysis, differential scanning calorimetry, and Vicat softening temperature (VST). The results showed that PA1212 formed submicron dispersion domains in the TPU matrix, indicating good compatibility between TPU and PA1212. A slight increase of the tensile strength was achieved as PA1212 content is relatively low. Because of the strong hydrogen‐bonding interaction between TPU and PA1212, the thermal stability of the blends is improved, and VST values rise up from about 80 (pure TPU) to 100°C, showing attractive potential application. POLYM. ENG. SCI., 2008. © 2007 Society of Plastics Engineers     

Influence of composition and phase morphology on rheological properties of polypropylene/poly(ethylene‐co‐octene) blends

In this article, the phase morphology and rheological properties of polypropylene (PP)/poly(ethylene‐co‐octene) (POE) blends with a droplet‐matrix microstructure were studied by scanning electron microscopy and rheological experiments. The data were analyzed to yield the variations of rheological behavior with blend composition and insight into the microstructure of PP/POE blends. The Palierne's emulsion type model was used to extract information on rheological properties, and the interfacial tensions between the PP and POE were determined by fitting the experimental data with this model. The results indicated that the interfacial tensions were shown to depend on blend composition and temperature. Rheological properties of PP/POE blends were investigated in a systemic way with varying shear histories. The results showed that shear history had an important effect on the rheological properties of the blends due to the dispersed phase (POE) domains refined with increasing preshear rate and preshear time. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

In situ compatibilization of polystyrene/polyolefin elastomer blends by the Friedel–Crafts alkylation reaction

Blends of polystyrene (PS) with polyolefin elastomer (POE) were prepared by a reactive extrusion method. In order to increase the compatibility of the two blending components, a Lewis acid catalyst, aluminium chloride (AlCl₃), was adopted to initiate the Friedel–Crafts alkylation reaction. Fourier‐transform infrared (FTIR) spectra of the PS/POE/AlCl₃ blends extracted with butanone verified the graft structure between the PS and POE. Because the in situ generated PS‐graft‐POE copolymers acted as compatibilizers, the mechanical properties of PS/POE blends were greatly improved. For example, after compatibilization, the Charpy impact strength of an 80/20 (wt%) PS/POE blend was increased from 6.29 to 8.50 kJ m^?2. Scanning electron microscopy (SEM) showed that the size of the droplets decreased from 9–10 µm to less than 2 µm with the addition of AlCl₃. Gel permeation chromatography (GPC) showed competition between the grafting reaction and the degradation of blending components in the presence of AlCl₃. Copyright © 2005 Society of Chemical Industry     

Structure and properties of in situ compatibilized polystyrene/polyolefin elastomer blends

To increase the compatibility of polystyrene (PS) and polyolefin elastomer (POE) blends, a Lewis acid catalyst, aluminum chloride (AlCl₃), was adopted to initiate the Friedel–Crafts alkylation reaction for the formation of PS‐graft‐POE copolymer. Dynamic mechanical analysis indicated that PS/POE and PS/POE/AlCl₃ blends are partially miscible, and the formation of PS‐graft‐POE copolymer increased the compatibility between PS and POE. Scanning electron microscope and transmission electron microscope results showed that the domain size of the blends decreased dramatically and the size distribution became more uniform with the addition of AlCl₃. Such in situ compatibilization also induced hindrance to the macromolecular chain movement, as reflected by the results of the dynamic rheological analysis. The dynamic rheological behaviors of PS/POE and PS/POE/AlCl₃ blends under different temperature showed that in situ compatibilization weakened the effects of thermooxidation on PS/POE blends. Moreover, in situ compatibilization decreased the activation energy of viscous flow and reduced the influence of temperature on PS/POE blends. POLYM. ENG. SCI., 47:951–959, 2007. © 2007 Society of Plastics Engineers     

Dynamic mechanical properties and morphology of high‐density polyethylene/CaCO3 blends with and without an impact modifier

Dynamic mechanical analysis and differential scanning calorimetry were used to investigate the relaxations and crystallization of high‐density polyethylene (HDPE) reinforced with calcium carbonate (CaCO₃) particles and an elastomer. Five series of blends were designed and manufactured, including one series of binary blends composed of HDPE and amino acid treated CaCO₃ and four series of ternary blends composed of HDPE, treated or untreated CaCO₃, and a polyolefin elastomer [poly(ethylene‐co‐octene) (POE)] grafted with maleic anhydride. The analysis of the tan δ diagrams indicated that the ternary blends exhibited phase separation. The modulus increased significantly with the CaCO₃ content, and the glass‐transition temperature of POE was the leading parameter that controlled the mechanical properties of the ternary blends. The dynamic mechanical properties and crystallization of the blends were controlled by the synergistic effect of CaCO₃ and maleic anhydride grafted POE, which was favored by the core–shell structure of the inclusions. The treatment of the CaCO₃ filler had little influence on the mechanical properties and morphology. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3907–3914, 2007     

Blends of thermoplastic polyurethane and polypropylene. I. Mechanical and phase behavior

Pure thermoplastic polyurethane (TPU), polypropylene (PP), and TPU/PP blends with different weight ratios prepared in a twin‐screw extruder were investigated by dynamic mechanical analysis (DMA), the universal tester for mechanical investigation, and by wide‐angle X‐ray diffraction (WAXD). The addition of PP above 20 wt % to the TPU stepwise changed the ductility and Young's modulus, i.e., apparently a kind of ductile → brittle transition occurred between TPU/PP 80/20 and TPU/PP 60/40 blends. This fact and the result of analysis of WAXD curves indicated matrix → dispersed phase inversion in this concentration region. TPU melt enabled easier migration of the PP chains and prolonged crystallization of PP matrix during solidification process affecting thus crystallite size, orientation, and crystallinity. In accordance to this fact, DMA results indicated partial miscibility of PP with polyurethane in the TPU/PP blends due to the lack of interfacial interaction and adhesion between the nonpolar crystalline PP and polar TPU phases. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 3980–3985, 2007     

PVC／TPU／SBS—g—MMA共混体系研究

制备了ＳＢＳ－ｇ－ＭＭＡ系列接枝共聚物,并对其进行了表征。以ＳＢＳ－ｇ－ＭＭＡ作为ＰＶＣ／ＴＰＵ共混体系的增容剂,对不同配比的ＰＶＣ／ＴＰＵ／ＳＢＳ－ｇ－ＭＭＡ共混体系的物理力学性能、流变性等进行了研究。结果表明,ＳＢＳ－ｇ－ＭＭＡ接枝共聚物对ＰＶＣ／ＴＰＵ共混体系起到了明显的增容作用。     

Properties and preparation of olefin block copolymer/thermoplastic polyurethane blends

The properties of olefin block copolymer (OBC)/thermoplastic polyurethane (TPU) blends with or without maleic anhydride (MA) modification were characterized and compared. Compared with the OBC/TPU blends, OBC‐g‐MA/TPU blends displayed finer morphology and reduced domain size in the dispersed phase. The crystallization temperatures of TPU decreased significantly from 155.9 °C (OBC/TPU) to 117.5 °C (OBC‐g‐MA/TPU) at low TPU composition in the blends, indicating the inhibition of crystallization through the sufficient interaction of modified OBC with TPU composition. The modified systems showed higher thermal stability than the unmodified systems over the investigated temperature range due to the enhanced interaction through inter‐bonding. The highest improvement in tensile strength was more than fivefold for OBC‐g‐MA/TPU (50/50) in comparison with its unmodified blend via the enhanced interfacial interaction between OBC‐g‐MA and TPU. This also led to the highest Young's modulus of 77.8 ± 3.9 MPa, about twofold increase, among the investigated blend systems. A corresponding improvement on the ductility was also observed for modified blends. The modification did not vary the glass transition temperature and crystalline structure much, thus the improvement in the mechanical properties was mainly attributed to the improved compatibility and interaction from the compatibilization effect as well as increased viscosity from the crosslinking effect for modified blends. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43703.     

Effects of compatibilizer and testing speed on the mechanical and morphology behaviors of co‐continuous amorphous copolyester‐polyoxymethylene blends

Co‐continuous amorphous copolyester (PETG)/polyoxymethylene (POM) (50/50 wt%/wt%) blends were prepared using a twin screw extruder followed compression molding. Two types of thermoplastic polyurethane (TPU) (i.e., polyester‐based and polyether‐based) were used to compatibilize the blends system. The thermal properties were characterized by using differential scanning calorimetry (DSC). The mechanical properties of the co‐continuous PETG/POM blends were studies through flexural and single‐edge notch tensile test (SEN‐T). The SEN‐T test was performed at three different testing speeds; 1, 100, and 500 mm/min. Scanning electron microscope (SEM) was used to access the fracture surface morphology. The flexural strength of the PETG/POM blends was decreased in the presence of TPU. This was attributed to the elastomeric nature of the TPU. The compatibilizing effects of TPU on the PETG/POM blends were proven by moderate improvement in the fracture toughness and confirmed by the SEM observation. The SEN‐T fractured surface of the compatibilized blends showed gross matrix shear yielding as compared to the uncompatibilized system. The K_c values of the PETG/POM blends decreased as the testing speed increased. The optimum toughening effect was observed in PETG/POM blends compatibilized with polyether‐based TPU at testing speed of 100 mm/min. The polyether‐based TPU is a more efficient compatibilizer, because the amount required is one‐half that of the polyester‐based counterpart to achieve the same K_c value. This was attributed to the elastomeric nature of the polyether‐based TPU. The softer nature of polyether‐based TPU could provide better toughening effect than the polyester‐based TPU, which is relatively harder in nature. POLYM. ENG. SCI., 45:710–719, 2005. © 2005 Society of Plastics Engineers     

红外光谱法研究TPU/SEBS的相容性

采用傅里叶变换红外光谱仪、扫描电子显微镜和热重分析仪,研究了3种不同类型增容剂——马来酸酐接枝聚丙烯（PP-g-MAH）、双乙撑酰胺（EBS）及自制增容剂对热塑性聚氨酯弹性体/氢化苯乙烯丁二烯苯乙烯三嵌段共聚物（TPU/SEBS）的氨基特征峰红移影响,进而研究了增容效果。结果表明,3种增容剂中自制增容剂增容效果最佳,且当其添加量为 6 %(质量分数,下同)时,氨基特征峰红移程度最大达到28 cm-1;添加自制增容剂共混体系粒子分散最为均匀;分别添加PP-g-MAH、EBS、自制增容剂时,SEBS的分解温度由438.81 ℃分别上升至441.79、443.68、447.03 ℃,其中添加自制增容剂的共混体系热稳定性最好。     

Influence of the morphology and viscoelasticity on the thermomechanical properties of poly(lactic acid)/thermoplastic polyurethane blends compatibilized with ethylene-ester copolymer

Viscoelastic, interfacial properties, and morphological data were employed to predict the thermal and mechanical properties of compatibilized poly(lactic acid) (PLA)/thermoplastic polyurethane (TPU) blends. The combination of interfacial thickness measured by contact angle and entanglement density determined by dynamical mechanical analysis analyze data was employed to evaluate the mechanical behavior of PLA/TPU blends with and without ethylene-butyl acrylate-glycidyl methacrylate (EBG) compatibilization agent. The PLA/TPU blend (70/30 wt %) was prepared in a Haake internal mixer at 190 °C and compatibilized with different contents of EBG. The evaluation of the interfacial properties revealed an increase in the interfacial layer thickness of the PLA/TPU blend with EBG. The scanning electronic microscopy images showed a drastic reduction in the size of the dispersed phase by increasing the compatibilizer agent EBG content in the blend. The compatibilization of the PLA/TPU blends improved both the Izod impact strength and yield stress by 38 and 33%, respectively, in comparison with neat PLA/TPU blend. The addition of EBG into PLA/TPU blends significantly increased the entanglement density and the PLA toughening but resulted in a decrease of PLA deformation at break. The PLA and TPU glass transitions were affected by the EBG, suggesting that the PLA and TPU domains were partially miscible. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48926.     

Compatibilizer in waste tire powder and low‐density polyethylene blends and the blends modified asphalt

With the increasing ratio of waste tire powder (WTP) to low‐density polyethylene (LDPE), the hardness and tensile strength of the WTP/LDPE blends decreased while the elongation at break increased. Five kinds of compatibilizers, such as maleic anhydride‐grafted polyethylene (PE‐g‐MA), maleic anhydride‐grafted ethylene‐octene copolymer (POE‐g‐MA), maleic anhydride‐grafted linear LDPE, maleic anhydride‐grafted ethylene vinyl‐acetate copolymer, and maleic anhydride‐grafted styrene‐ethylene‐butylene‐styrene, were incorporated to prepare WTP/LDPE blends, respectively. PE‐g‐MA and POE‐g‐MA reinforced the tensile stress and toughness of the blends. The toughness value of POE‐g‐MA incorporating blends was the highest, reached to 2032.3 MJ/m³, while that of the control was only 1402.9 MJ/m³. Therefore, POE‐g‐MA was selected as asphalt modifier. The toughness value reached to the highest level when the content of POE‐g‐MA was about 8%. Besides that the softening point of the modified asphalt would be higher than 60°C, whereas the content of WTP/LDPE blend was more than 5%, and the blends were mixed by stirring under the shearing speed of 3000 rpm for 20 min. Especially, when the blend content was 8.5%, the softening point arrived at 82°C, contributing to asphalt strength and elastic properties in a wide range of temperature. In addition, the swelling property of POE‐g‐MA/WTP/LDPE blend was better than that of the other compalibitizers, which indicated that POE‐g‐MA /WTP/LDPE blend was much compatible with asphalt. Also, the excellent compatibility would result in the good mechanical and processing properties of the modified asphalt. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011