An iron‐based reverse ATRP process for the living radical polymerization of acrylonitrile

A hexa‐substituted ethane thermal iniferter, diethyl‐2,3‐dicyano‐2,3‐di(p‐tolyl) succinate (DCDTS), was firstly used as the initiator in the reverse atom transfer radical polymerization (RATRP) of acrylonitrile. FeCl₃ coordinated by isophthalic acid (IA) was used as the catalyst in this system. The polymerization in N,N‐dimethylformamide not only shows the best control of molecular weight and its distribution but also provides rather rapid reaction rate with the ratio of [AN] : [DCDTS] : [FeCl₃] : [IA] at 500 : 1 : 2 : 4. The polymers obtained were end‐functionalized by chlorine atom, and they were used as macroinitiators to proceed the chain extension polymerization in the presence of FeCl₂/IA catalyst system via a conventional ATRP process and polyacrylonitrile obtained was with M_n = 39,260, PDI = 1.25. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of well‐defined poly(methyl methacrylate) nanoparticles by reverse atom transfer radical polymerization in a microemulsion

Well‐defined poly(methyl methacrylate) (PMMA) with an α‐isobutyronitrile group and an ω‐bromine atom as the end groups was synthesized by the microemulsion polymerization of methyl methacrylate (MMA) at 70°C with a 2,2′‐azobisisobutyronitrile/CuBr₂/2,2′‐bipyridine system. The conversion of the polymerization reached 81.9%. The viscosity‐average molecular weight of PMMA was high (380,000), and the polydispersity index was 1.58. The polymerization of MMA exhibited some controlled radical polymerization characteristics. The mechanism of controlled polymerization was studied. The presence of hydrogen and bromine atoms as end groups of the obtained PMMA was determined by ¹H‐NMR spectroscopy. The shape and size of the final polymer particles were analyzed by scanning probe microscopy, and the diameters of the obtained particles were usually in the range of 60–100 nm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3670–3676, 2006     

Reverse atom transfer radical polymerization of methyl methacrylate in different solvents

The reverse atom transfer radical polymerization of methyl methacrylate was investigated in different solvents: xylene, N,N‐dimethylformamide, and pyridine. The polymerizations were uncontrolled, using 2,2′‐bipyridine as a ligand in xylene and pyridine because the catalyst (CuBr₂/2,2′‐bipyridine complex) had poor solubility in the xylene system. In the pyridine system, the solubility of the catalyst increased, but the solvent could complex with CuBr₂, which influenced the control of the polymerization. In the N,N‐dimethylformamide system, the catalyst could be dissolved in the solvent completely, but the ? N(CH₃)₂ group in N,N‐dimethylformamide could also complex with CuBr₂, so the polymerization could not be well controlled. The ligand of 4,4′‐di(5‐nonyl)‐2,2′‐bipyridine was also investigated in xylene; the introduction of the ? CH(C₄H₉)₂ group enabled the CuBr₂/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine complex to easily dissolve in xylene, and the polymerizations were well controlled. The number‐average molecular weight increased linearly with the monomer conversion from 4280 to 14,700. During the whole polymerization, the polydispersities were quite low (1.07–1.10). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization initiated by 1,1,2,2‐tetraphenyl‐1,2‐ethanediol/FeCl3/triphenylphosphine

FeCl₃ coordinated by triphenylphosphine was first used as the catalyst in the 1,1,2,2‐tetraphenyl‐1,2‐ethanediol‐initiated reverse atom transfer radical polymerization of acrylonitrile. A FeCl₃/triphenylphosphine ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided a rather rapid reaction rate. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 62.4 kJ/mol. When FeCl₃ was replaced with CuCl₂, the reverse atom transfer radical polymerization of acrylonitrile did not show prominent living characteristics. To demonstrate the active nature of the polymer chain end, the polymers were used as macroinitiators to advance the chain‐extension polymerization in the presence of a CuCl/2,2′‐bipyridine catalyst system via a conventional atom transfer radical polymerization process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4041–4045, 2007     

Kinetic study of atom transfer radical polymerization of methyl methacrylate in ionic liquids

The kinetics of methyl methacrylate (MMA) homopolymerization performed by atom transfer radical polymerization (ATRP) is investigated in detail using ethyl‐2‐bromopropionate (EPN‐Br) as initiator, CuBr as catalyst, and pentamethyldiethylenetriamine (PMDETA) as ligand in ionic liquids (ILs) and acetonitrile. ILs in this research covered two different substitutional imidazolium cations and anions including halogen and halogen‐free ones. The typical cations include 1‐butyl‐3‐methylimidazolium, 1‐ethyl‐3‐methylimidazolium and the typical anions include bromide, tetrafluoroborate. The effects of solvents, temperature, and reaction ingredients ratios on the polymerization kinetics are all investigated in this article and the apparent energy of activation (ΔE) calculated for the ATRP of MMA in 1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate is 6.95 KJ/mol. The number‐average molecular weights (M_n) increase linearly with conversion but are much higher than the theoretical values. It is probably due to the low concentration of deactivator at the early stage of polymerization and the lower bond energy of C‐Br in PMMA‐Br than that in EPN‐Br. Moreover, the catalyst is easily separated from the polymer and the regenerated catalyst is reused for more than three times. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

High‐conversion catalytic chain transfer polymerization of methyl methacrylate

In this work the effects of conversion on the apparent catalyst activity in the catalytic chain transfer polymerization of methyl methacrylate are reported. Several mechanisms are discussed that may explain the experimental observations. The discussion is supported with computer simulations using Predici software. It is shown that the experimental decrease in weight average molecular weight with conversion is smaller than the decrease obtained in simulations. The most likely cause for this discrepancy is slow catalyst deactivation. The half‐life of CoBF under the reported conditions was determined to be about 10 h. Furthermore, the effect of acetic acid (HAc) and benzoyl peroxide (BPO) on the evolution of the molecular weight distribution is investigated. Both HAc and BPO enhance catalyst deactivation. For HAc, catalyst deactivation scales with the square root of its concentration. BPO‐ enhanced deactivation depends linearly on its concentration. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1375–1388, 2004     

Surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate from carbon fibre

Surface modification of carbon fibre (CF) by well‐defined polymer brushes was carried out using the ‘grafting from’ method. Poly(methyl methacrylate)‐grafted carbon fibre (CF‐PMMA) was successfully prepared by surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate (MMA) from the macro‐initiator, bromo‐acetic ester‐modified carbon fibre (CF‐BrA), with the complex of 1,10‐phenanthroline and Cu(I)Br as catalyst. The percentage of grafting (PG%) and the conversion of monomer (C%) increased linearly with increasing of polymerization time, and reached 24.0 % and 6.7 %, respectively, after a polymerization time of 6 h, calculated from the elemental analyses (EA). The structural and surface morphological analyses were conducted with Fourier‐transform infrared (FTIR) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Copyright © 2005 Society of Chemical Industry     

MMA的原子转移自由基聚合新体系

以α－溴异丁酸乙酯为引发剂，研究了不同体系的甲基丙烯酸甲酯的原子自由基聚合，考察了配位剂及溶剂对聚合的影响。并且采用新的聚合体系，以溴异丁酸乙酯／CuBr/CuBr2/NNN为引发体系，二苯醚为溶剂，成功地实现MMA的ATRP。     

Effect of ferrocene moieties on the copper‐based atom transfer radical polymerization of methyl methacrylate

The atom transfer radical polymerization (ATRP) of methyl methacrylate catalyzed by copper–tripodal complexes with ferrocene moieties (CuX/TRENFcImine, where X is Br or Cl, and TRENFcImine is tris‐[2‐(ferrocenylmethyleneimino)ethyl]amine) was investigated to understand the effect of redox active moieties on the performance of ATRP catalysts. The CuBr/TRENFcImine system was highly active, with 82% conversion in 2 h. However, the polymerization became slower at higher molar ratios of monomer to catalyst. The polydispersity index was broad, and the initiation efficiency was relatively low. On the basis of the conformational analysis, the highly active and less controlled polymerization was probably caused by the electronic effect rather than the steric effect on the ferrocene moieties, which led to the higher and lower values in the activation and deactivation steps, respectively. The polydispersity index was improved by the addition of CuBr₂, but this led to slower rates of polymerization. The effect of halide groups on ATRP caused a faster rate in the CuBr/TRENFcImine polymerization system than in the CuCl/TRENFcImine system. The higher molar ratio of monomer to catalyst had no significant effect on the CuCl/TRENFcImine system. Nonetheless, the trace of water in the CuCl₂·2H₂O system accelerated the rate of propagation, which led to a higher molecular weight. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of amphiphilic poly(methyl methacrylate)‐block‐poly(methacrylic acid) diblock copolymers by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of 1‐(butoxy)ethyl methacrylate (BEMA) was carried out using CuBr/2,2′‐bipyridyl complex as catalyst and 2‐bromo‐2‐methyl‐propionic acid ester as initiator. The number average molecular weight of the obtained polymers increased with monomer conversion, and molecular weight distributions were unimodal throughout the reaction and shifted toward higher molecular weights. Using poly(methyl methacrylate) (PMMA) with a bromine atom at the chain end, which was prepared by ATRP, as the macro‐initiator, a diblock copolymer PMMA‐block‐poly [1‐(butoxy)ethyl methacrylate] (PMMA‐b‐PBEMA) has been synthesized by means of ATRP of BEMA. The amphiphilic diblock copolymer PMMA‐block‐poly(methacrylic acid) can be further obtained very easily by hydrolysis of PMMA‐b‐PBEMA under mild acidic conditions. The molecular weight and the structure of the above‐mentioned polymers were characterized with gel permeation chromatography, infrared spectroscopy and nuclear magnetic resonance. Copyright © 2005 Society of Chemical Industry     

Atom transfer radical polymerization of lauryl methacrylate

The atom transfer radical polymerization (ATRP) of lauryl methacrylate (LMA) with an ethyl 2‐bromobutyrate/CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine initiation system was successfully carried out in toluene, and poly(lauryl methacrylate) with a low polydispersity (1.2 < weight‐average molecular weight/number‐average molecular weight < 1.5) was obtained. Plots of ln ([M])₀/([M]) versus time and plots of the molecular weight versus conversion showed a linear dependence, indicating a constant number of propagating species throughout the polymerization. The rate of polymerization was 0.56‐order with respect to the concentration of the initiator and 1.30‐order with respect to the concentration of the Cu(I) catalyst. In addition, the effect of the solvent on the polymerization was investigated, and the thermodynamic data and activation parameters for the solution ATRP of LMA were reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1117–1125, 2003     

Photo‐induced controlled radical polymerization of methyl methacrylate mediated by photosensitive nitroxides

Photosensitive nitroxides bearing different chromophore groups (benzophenone, naphthalene and quinoline) were synthesized and characterized. The photochemical properties of the synthesized products were investigated by UV?visible and fluorescence measurements. The results indicated that an efficient energy transfer from the chromophore moiety to the nitroxide radical moiety could occur within the molecular distances. The photo‐induced nitroxide‐mediated polymerization of methyl methacrylate (MMA) was performed using the photosensitive nitroxide/2,2‐dimethoxy‐2‐phenyl acetophenone as a bimolecular mediated system. The controlled character of the polymerization was confirmed by the linear tendency of molecular weight evolution with narrow molecular weight distribution (1.3?1.4). The experimental conditions, such as type of chromophore, initiator concentration and molar ratio of initiator/nitroxide, are discussed for a better understanding of the mechanism of the controlled polymerization. Using the polymerization products as macroinitiator, the chain extension reaction of MMA turned out to be able to re‐initiate further polymerization of the monomer. © 2014 Society of Chemical Industry     

Synthesis of crosslinked polyacrylonitrile via atom transfer radical polymerization with activators regenerated by electron transfer and use of the resin in mercury removal after modification

Crosslinked polyacrylonitrile (PAN) was synthesized with divinylbenzene as the crosslinker with an iron(III)‐mediated atom transfer radical polymerization method with activators regenerated by electron transfer. The polymerization exhibited first‐order kinetics with respect to the polymerization time. Hydroxylamine hydrochloride (NH₂OH·HCl) was used to modify the cyano groups of the crosslinked PAN to obtain amidoxime (AO) groups. The AO‐crosslinked PAN was used to remove Hg(II). The optimum pH, adsorption kinetics, and adsorption isotherms were investigated. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Atom transfer radical bulk polymerization of methyl methacrylate under microwave irradiation

Microwave irradiation (MI) was applied to the atom transfer radical bulk polymerization of methyl methacrylate. The influence of the amount of the refluxing solvent used for controlling the polymerization temperature, irradiation power, irradiation time, and initiator concentration on the conversion, molecular weight, and molecular weight distribution of the polymers was studied with a benzyl chloride/cuprous chloride/2,2′‐bipyridyl initiation system and compared with the corresponding conventional heating (CH) process. In comparison with CH, the results can be summarized as follows. The polymerization rate for reaching 70% conversion increased 2.6–5.1 times under an irradiation power of 270–630 W. The apparent increasing rate constant was much larger than that with CH and increased with the irradiation power. MI produced a higher polymerization rate and conversion even if the concentration of the initiation system was very low (initial monomer concentration/initial initiator concentration = 200:0.33 mol/mol) and the polydispersity index (DI) was narrower; however, CH yielded almost no polymers. MI promoted the activities of the catalyst and monomer, and its initiation efficiency was higher than that with CH and increased with the irradiation power. MI obviously played an important role in promoting the polymerization rate of atom transfer radical polymerization (ATRP). MI reduced the concentration of the initiation system and perhaps made ATRP controlled (cf. uncontrolled ATRP with CH); at the same time, it made the DI values of the polymers narrower. In comparison with the initiation efficiencies found with benzyl bromide and 2,2′‐azobisisobutyronitrile used as initiators, the initiation efficiency with p‐toluene sulfonyl chloride used as an initiator was higher; moreover, DI was much narrower (1.17), and the polymerization rate was greater. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1787–1793, 2003     

Reverse atom transfer radical polymerization of acrylonitrile under microwave irradiation

Reverse atom transfer radical polymerization was first used to successfully synthesize polyacrylonitrile under microwave irradiation. FeCl₃, coordinated by isophthalic acid, was used as the catalyst, and 2,2′‐azobisisoheptonitrilewas used as the initiator. N,N‐Dimethylformamide was used as the solvent to improve the solubility of the ligand. Under the same experimental conditions, the apparent rate constant under microwave irradiation was higher than that under conventional heating. The polymerization not only showed the best control of the molecular weight and its distribution but also provided a rather rapid reaction rate with the [acrylonitrile]/[2,2′‐azobisisoheptonitrile]/[FeCl₃]/[isophthalic acid] ratio of 300 : 1 : 1 : 2. The polymers obtained were used as macroinitiators to initiate the chain extension and successfully synthesize acrylonitrile polymers with a molecular weight higher than 50,000 and a narrow polydispersity as low as 1.30. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Atom transfer radical polymerization of methyl methacrylate induced by an initiator derived from an ionic liquid

An ionic liquid, 1‐(2‐bromoisobutyryloxyethyl)‐3‐methylimidazolium hexafluorophosphate, was synthesized to act as the initiator of the atom transfer radical polymerization of methyl methacrylate (MMA). By a combination with CuBr and pentamethyldiethylenetriamine, the ionic liquid initiated the free radical polymerization of MMA to proceed in a controlled way over a wide temperature range of 0 to 60 °C. The number‐average molecular weight of the poly(methyl methacrylate) (PMMA) increased with monomer conversion and the polydispersity was relatively narrow. End‐group analysis by proton NMR indicated the presence of the initiator fragments at the ends of the polymer main chain. Lowering the reaction temperature had the result of increasing the content of rr triads. The glass transition temperature was higher for PMMA obtained at lower temperature than at higher temperature. The solubility of the PMMA in methanol increased with the incorporation of imidazolium groups in the polymer. Copyright © 2006 Society of Chemical Industry     

Effects of the solvent polarity on the atom transfer radical polymerization of methyl methacrylate initiated by 4‐(chloromethyl)phenyltrimethoxysilane

The controllability of the atom transfer radical polymerization of methyl methacrylate in the polar solvent N,N‐dimethylformamide and the nonpolar solvent xylene with 4‐(chloromethyl)phenyltrimethoxysilane as an initiator and with CuCl/2,2′‐bipyridine and CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as catalyst systems was studied. Gel permeation chromatography analysis established that in the nonpolar solvent xylene, much better control of the molecular weight and polydispersity of poly(methyl methacrylate) was achieved with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system than with the CuCl/2,2′‐bipyridine as catalyst system. In the polar solvent N,N‐dimethylformamide, unlike in xylene, the polymerization was more controllable with the CuCl/2,2′‐bipyridine catalyst system than with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2751–2754, 2007     

Synthesis of poly(aryl ether sulfone)‐graft‐polystyrene and poly(aryl ether sulfone)‐graft‐[polystyrene‐block‐poly(methyl methacrylate)] through atom transfer radical polymerization

A new graft copolymers poly(aryl ether sulfone)‐graft‐polystyrene (PSF‐g‐PS) and poly(aryl ether sulfone)‐graft‐[polystyrene‐block‐poly(methyl methacrylate)] (PSF‐g‐(PS‐b‐PMMA)) were successfully prepared via atom transfer radical polymerisation (ATRP) catalyzed by FeCl₂/isophthalic acid in N,N‐dimethyl formamide. The products were characterized by GPC, DSC, IR, TGA and NMR. The characterization data indicated that the graft copolymerization was accomplished via conventional ATRP mechanism. The effect of chloride content of the macroinitiator on the graft copolymerization was investigated. Only one glass transition temperature (T_g) was detected by DSC for the graft copolymer PSF‐g‐PS and two glass transition temperatures were observed in the DSC curve of PSF‐g‐(PS‐b‐PMMA). The presence of PSF in PSF‐b‐PS or PSF‐g‐(PS‐b‐PMMA) was found to improve thermal stabilities. © 2002 Society of Chemical Industry     

Fe‐mediated ARGET atom transfer radical polymerization of methyl methacrylate in ionic liquid‐based microemulsion

Poly(methyl methacrylate) (PMMA) was synthesized by activator regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP) of MMA in ionic liquid‐based microemulsion with polyoxyethylene sorbitan monooleate (Tween 80) as surfactant. The polymerization was carried out at 25°C with CCl₄ as initiator, FeCl₃·6H₂O/N,N,N′,N′‐tetramethyl‐1,2‐ethanediamine (TMEDA) as catalyst complex in the presence of reducing agent ascorbic acid (VC). The polymerization kinetics showed the feature of controlled/″living″ process as evidenced by a linear first‐order plot. The well‐controlled polymers were obtained with narrow polydispersity indices and the ionic liquid‐based microemulsions were transparent with a particle size less than 30 nm. The obtained polymer was characterized by ¹H NMR and gel permeation chromatography. The chain extension was successfully achieved by the obtained PMMA macroinitiator/FeCl₃·6H₂O/TMEDA/VC initiator system based on ARGET ATRP method. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Evaluation of bis(2‐pyridinal)ethylenediimine as ligand for atom transfer radical polymerization of methyl methacrylate: influence of polar solvents

Bis(2‐pyridinal)ethylenediimine was used as a ligand for copper‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate. Reactions were performed at molar ratios of monomer:initiator:catalyst of 100:1:0.5 and catalyst:ligand ratios of 1:1 and 1:2. Polymerization reactions were performed in bulk as well as in the presence of polar solvents such as dimethylformamide and acetonitrile. Reactions carried out in bulk resulted in polymerizations with poor control due to the low solubility of the copper complex in the monomer. The control was however improved by carrying out the reactions in solution using either dimethylformamide or acetonitrile as solvent. Copyright © 2003 Society of Chemical Industry