Metal‐ion‐retention properties of the poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine) resin

The water‐insoluble resin poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine), through a radical polymerization solution, was synthesized with ammonium persulfate as an initiator and N,N‐methylene bisacrylamide as a crosslinking reagent. The metal‐ion‐retention properties were studied by batch and column equilibrium procedures for the following metal ions: Hg(II), Cu(II), Cd(II), Zn(II), Pb(II), and Cr(III). These properties were investigated under competitive and noncompetitive conditions. The effects of the pH, maximum retention capacity, and regeneration capacity were studied. The resin showed a high retention ability for Hg(II) ions at pH 2.0. The retention of Hg(II) ions from a mixture of ions was greater than 90%. The resin showed a high selectivity for Hg(II) with respect to other metal ions. The Hg(II)‐loaded resin was able to be recovered with 4M HClO₄. The retention capacity was kept after four cycles of adsorption and desorption. The retention properties for Hg(II) were very similar with the batch and column methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3556–3562, 2003     

Thermal,catalytic, antimicrobial,and chelating aspects of phenolic resin and its polychelates with f‐block elements

The polymeric ligand (resin) was synthesized by condensation of 2‐hydroxy‐4‐ethoxybenzophenone with ethane diol in the presence of polyphosphoric acid as a catalyst at 145°C for 10 h. The synthesized resin was used to study its ion exchange efficiency and to synthesize its polychelates with 4f‐block elements. The resin and its polychelates were characterized on the basis of elemental analyses, electronic spectra, magnetic susceptibilities, IR, NMR, and thermogravimetric analyses. The molecular weight was determined using number–average molecular weight (M_n ) by a vapor pressure osmometry (VPO) method. Ion‐exchange studies at various concentrations of different electrolytes, pH, and rate have been carried out for f‐block elements. Antimicrobial activity of all polychelates and catalytic activity of selected polychelates in organic synthesis have been studied. It is observed that resin can be used as an ion‐exchanger and polychelates are found to be an efficient catalysts and antimicrobial agents. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Studies on poly(8‐hydroxy‐4‐azoquinolinephenylmethacrylate) and its metal complexes

8‐Hydroxy‐4‐azoquinolinephenylmethacrylate (8H4AQPMA) was prepared and polymerized in ethyl methyl ketone (EMK) at 65°C using benzoyl peroxide as free radical initiator. Poly(8‐hydroxy‐4‐azoquinolinephenylmethacrylate) poly(8H4AQPMA) was characterized by infrared and nuclear magnetic resonance techniques. The molecular weight of the polymer was determined by gel permeation chromatography. Cu(II) and Ni(II) complexes of poly(8H4AQPMA) were prepared. Elemental analysis of polychelates suggests that the metal‐ligand ratio is about 1 : 2. The polychelates were further characterized by infrared spectra, X‐ray diffraction, spectral studies, and magnetic moments. Thermal analyses of the polymer and polychelates were carried out in air. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1516–1522, 2006     

New antimicrobial polyurea: Synthesis,characterization, and antibacterial activities of polyurea‐containing thiosemicarbazide–metal complexes

A novel class of polymer–metal complexes was prepared by the condensation of a polymeric ligand with transition‐metal ions. The polymeric ligand was prepared by the addition polymerization of thiosemicarbazides with toluene 2,4‐diisocyanate in a 1 : 1 molar ratio. The polymeric ligand and its polymer–metal complexes were characterized by elemental analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, and ¹³C‐NMR and ¹H‐NMR spectroscopy. The geometries of the central metal ions were determined by electronic spectra (UV–visible) and magnetic moment measurement. The antibacterial activities of all of the synthesized polymers were investigated against Bacillus subtilis and Staphylococcus aureus (Gram positive) and Escherichia coli and Salmonella typhi (Gram negative). These compounds showed excellent antibacterial activities against these bacteria with the spread plate method on agar plates, and the number of viable bacteria were counted after 24 h of incubation period at 37°C. The antibacterial activity results revealed that the Cu(II) chelated polyurea showed a higher antibacterial activity than the other metal‐chelated polyureas. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, ion-exchange and antimicrobial study of poly[(2-hydroxy-4-methoxy benzophenone) ethylene] resin and its polychelates with lanthanides(III)

The polymeric ligand (resin) was prepared from 2-hydroxy-4-methoxybenzophenone with Ethane Diol in the presence of polyphosphoric acid as a catalyst on constant heating at 160 °C constant heating for 13 h. The poly[(2-hydroxy-4-methoxybenzophenone) ethylene] (HMBP-ED) form 1:2 metal:ligand polychelates with La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III) and Dy(III). The polymeric ligand and its polychelates were characterized on the basis of elemental analyses, electronic spectra, magnetic susceptibilities, IR-spectroscopy, NMR and thermogravimetric analyses. The molecular weight was determined using number average molecular weight $(\overline{M}\text{n})$ by a vapour pressure osmometry (VPO) method. All the polychelates are paramagnetic in nature except La(III). Ion-exchange studies at different electrolyte concentrations, pH and rate have been carried out for lanthanides(III) metal ions.     

Studies of poly(8‐hydroxy‐4‐azoquinolinephenol‐formaldehyde) and its metal complexes

Poly(8‐hydroxy‐4‐azoquinolinephenol‐formaldehyde) resin (8H4AQPF) was prepared by condensing 8‐hydroxy 4‐azoquinoline phenol with formaldehyde (1 : 1 mol ratio) in the presence of oxalic acid. Polychelates were obtained when the DMF solution of poly(8H4AQPF) containing a few drops of ammonia was treated with the aqueous solution of Cu(II) and Ni(II) ions. The polymeric resin and polymer–metal complexes were characterized with elemental analysis and spectral studies. The elemental analysis of the polymer–metal complexes suggested that the metal‐to‐ligand ratio was 1 : 2. The IR spectral data of the polychelates indicated that the metals were coordinated through the nitrogen and oxygen of the phenolic ? OH group. Diffuse reflectance spectra, electron paramagnetic resonance, and magnetic moment studies revealed that the polymer–metal complexes of the Cu(II) complexes were square planar and those of the Ni(II) complexes were octahedral. X‐ray diffraction studies revealed that the polymer metal complexes were crystalline. The thermal properties of the polymer and polymer–metal complexes were also examined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1506–1510, 2006     

Preparation,characterization, and metal ion retention capacity of Co(II) and Ni(II) from poly(p‐HO‐ and p‐Cl‐phenylmaleimide‐co‐2‐hydroxypropylmethacrylate) using the ultra filtration technique

p‐Chlorophenylmaleimide and p‐hydroxyphenylmaleimide with 2‐hydroxypropyl methacrylate were synthesized by radical polymerization, and the metal ion retention capacity and thermal behavior of the copolymers were evaluated. The copolymers were obtained by solution radical polymerization with a 0.50 : 0.50 feed monomer ratio. The maximum retention capacity (MRC) for the removal of two metal ions, Co(II) and Ni(II) in aqueous phase were determined using the liquid‐phase polymer based retention technique. Inorganic ion interactions with the hydrophilic polymer were determined as a function of pH. The metal ion retention capacity does not depend strongly on the pH. Metal ion retention increased with an increase of pH for a copolymer composition 0.50 : 0.50. At different pH, the MRC of the poly(p‐chlorophenylmaleimide‐co‐2‐hydroxypropylmethacrylate) for Co(II) and Ni(II) ions varied from 44.1 to 48.6 mg/g and from 41.5 mg/g to 46.0 mg/g, respectively; while the MRC of poly(p‐hydroxyphenylmaleimide‐co‐2‐hydroxypropyl methacrylate) for Co(II) and Ni(II) ions varied from 28.4 to 35.6 mg/g and from 27.2 to 30.8 mg/g, respectively. The copolymers and copolymer–metal complexes were characterized by elemental analysis, FT‐IR, ¹H NMR spectroscopy, and thermal behavior. The thermal behavior of the copolymer and polymer–metal complexes were studied using differential scanning calorimetry and thermogravimetry techniques under nitrogen atmosphere. The thermal decomposition temperature and T_g were influenced by the binding‐metal ion on the copolymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and characterization of poly(1,3‐thiazol‐2‐yl‐carbomoyl) methyl methacrylate: Its metal complexes and antimicrobial activity studies

Poly(1,3‐thiazol‐2‐yl‐carbomoyl) methyl methacrylate [poly(TCMMA)] is prepared in dimethyl sulfoxide using 2,2′‐azobisisobutyronitrile as an initiator at 60°C. Poly(TCMMA) is characterized by IR and ¹H‐NMR spectroscopic techniques. Cadmium(II), copper(II), and nickel(II) chelates of poly(TCMMA) were synthesized. An elemental analysis of the polychelates suggests a metal/ligand ratio of 1:2. The polychelates are further characterized by IR and magnetic susceptibility measurements. The thermal properties of the polymer and metal chelates are also discussed. The molecular weights of the poly(TCMMA) are determined by the gel permeation chromatography technique. The antimicrobial activities of the polymer and metal chelates are tested against Staphylococcus aureus COWAN I (bacteria), Escherichia coli ATCC 25922 (bacteria), Listeria monocytogenes SCOTTA (bacteria), Bacillus subtilis LMG (bacteria), Enterobacter aeroginosa CCM 2531 (bacteria), Klebsiela pneumania FMCS (bacteria), Candida albicans CCM 314 (Mayo yeast), and Saccharamyces cerevisiae UGA 102 (Mayo yeast). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3244–3251, 2003     

Synthesis,characterization, and ligating behavior of poly[N,N‐p‐phenylene bisacryl (methacryl)amide]

Monomers of diacylated amine were synthesized by the reaction of acryloyl chloride or methacryloyl chloride with p‐phenylenediamine. Heating DMF solution of these monomers at 75°C in the presence of AIBN as an initiator gave the corresponding polymer. The solid metallopolymer complexes with different metal salts were isolated either by the in situ addition of the monomer, metal salt, and initiator at 75°C or by the reaction of the isolated polymer with the metal salt at 150°C. The monomers, polymers, and their metallopolymer compounds were characterized using elemental analysis, IR, NMR (¹H and ¹³C), and MS spectral measurements in addition to thermal analysis. The IR data showed that the coordinating atoms of the polymer are dependent on the reaction temperature. The ion selectivity of the isolated polymers toward different metal ions either for a single metal ion or in a mixture as aqueous solutions are studied by the batch techniques. Energy dispersive spectroscopy (EDS) measurements showed that both polymers are more selective to Hg²⁺ and Pb²⁺. The morphology of the polymers and their metallopolymer complexes at different temperature was also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2412–2422, 2006     

Trace metal ion retention properties of crosslinked poly(4‐vinylpyridine) and poly(acrylic acid)

The crosslinked resins poly(4‐vinylpiridine) (PVPy) and poly(acrylic acid) (PAA) were obtained by radical polymerization. PVPy shows monodentate ligands and PAA at basic pH is basically as acrylate anion, which can contain end‐carboxylates groups or form a bridge acting as mono‐ or bidentate ligands. The retention properties for trace metal ions from saline aqueous solutions and natural seawaters of these two resins were investigated by Batch equilibrium procedure. The metal ions studied were Cu(II), Pb(II), Cd(II), and Ni(II). The following effects were studied: pH, contact time, amount of the adsorbent, temperature, and salinity. The resin PVPy showed a high affinity for Cd(II) and PAA for Cu(II) and Cd(II). The metal ions were determined in the filtrate by atomic absorption spectrometry. By the treatment of the loaded resin with 4M HNO₃, it was possible to remove completely the Cu(II) ions. The retention properties of the resins were studied for trace metal ions present in the natural seawaters. Both resins showed a high affinity for Cd(II) when the natural seawater contained Cu(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2908–2916, 2004     

Resin I: Synthesis,characterization, and ion‐exchange properties of terpolymer resins derived from 2,4‐dihydroxypropiophenone,biuret, and formaldehyde

Terpolymers (2,4‐DHPBF) were synthesized by the condensation of 2,4‐dihydro‐xypropiophenone, biuret, and formaldehyde in the presence of acid catalyst with varying the molar ratio of reacting monomers. Terpolymer composition has been determined on the basis of their elemental analysis and their number–average molecular weight of these resin were determined by conductometric titration in nonaqueous medium. The viscosity measurements were carried out in N,N‐dimethyl formamide which indicate normal behavior. IR spectra were studied to elucidate the structure. The terpolymer resin has been further characterized by UV–visible and ¹H‐NMR spectra. The newly synthesized terpolymers proved to be selective chelating ion‐exchange terpolymers for certain metals. The chelating ion‐exchange properties of this terpolymer was studied for Fe (III), Cu (II), Hg (II), Cd (II), Co (II), Zn (II), Ni (II), and Pb (II) ions. A batch equilibrium method was employed in the study of the selectivity of metal ion uptake involving the measurement of the distribution of a given metal ion between the terpolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The terpolymer showed a higher selectivity for Fe (III), Hg (II), Cd (II), and Pb (II) ions than for Cu (II), Co (II), Zn (II), and Ni (II) ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of chelating resins with amino moieties and application on removal of copper(II) from EDTA complexes

Strong‐field ligands (amino moieties) are introduced into a hydrogel resin to obtain a chelating resin via inversion suspension polymerization. The characteristics of chelating copolymers are measured by using Fourier transform IR spectroscopy (FTIR), elemental analysis (EA), and scanning electron microscopy (SEM). After chelating copolymers adsorb cupric ions, the absorption peak of stretch N? H is shifted to higher frequency because of a coordination reaction from the FTIR spectra. Furthermore, the mechanism of metal complex adsorption on the chelating copolymer is that the strong‐field chelating ligand decomposes the bonding of the metal complexes and recoordinates the cupric ion to a chelating polymer, which is examined via FTIR, SEM with EA, and ionic chromatography analysis. The maximum adsorption capacity of cupric ions is 1.08 mmol/g and the adsorption capacity increases with the increase of the pH of the solution. The stability constant of the Cu chelating copolymer is 10^18.72, and it can have competition adsorption with EDTA in aqueous solution. These amino chelating copolymers can be used not only to recover metal ions but also to move anion pollution in wastewater. It is interesting that parts of the cupric ions adsorbed on the chelating copolymer are reduced into cupreous ions and/or copper atoms after electron spectroscopy for chemical analysis measurement. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2457–2468, 2005     

Chelation ion‐exchange study of copolymer resin derived from 8‐hydroxyquinoline 5‐sulphonic acid,oxamide, and formaldehyde

Copolymers (8‐HQ5‐SAOF) were synthesized by the condensation of 8‐hydroxyquinoline 5‐sulphonic acid (8‐HQ5‐SA) and oxamide (O) with formaldehyde (F) in the presence of acid catalyst. Four different copolymers were synthesized by using varied molar proportion of the reacting monomers. Copolymer resin composition has been determined on the basis of their elemental analysis and average molecular weights of these resins were determined by conductometric titration in nonaqueous medium. Viscometric measurement in dimethyl sulphoxide (DMSO) has been carried out with a view to ascertain the characteristic functions and constants. Electronic spectra, FTIR, and proton nuclear magnetic resonance spectra were studied to elucidate the structures. The newly synthesized copolymer proved to be a selective chelating ion‐exchange copolymer for certain metals. The chelating ion‐exchange properties of this synthesized copolymer was studied for different metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺. A batch equilibrium method was used in the study of the selectivity of metal ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion only for representative copolymer 8‐HQ5‐SAOF‐I due to economy of space. The study was carried out over a wide pH range, shaking time, and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Copolymer resin. VII. 8‐hydroxyquinoline‐5‐sulfonic acid–thiourea–formaldehyde copolymer resins and their ion‐exchange properties

8‐Hydroxyquinoline‐5‐sulfonic acid–thiourea–formaldehyde copolymer resins were synthesized through the condensation of 8‐hydroxyquinoline‐5‐sulfonic acid and thiourea with formaldehyde in the presence of hydrochloric acid as a catalyst and with various molar ratios of the reacting monomers. The resulting copolymers were characterized with UV‐visible, IR and 1H‐NMR spectral data, employed to determine the reactivity of monomers. The average molecular weights of these resins were determined with vapor pressure osmometry and conductometric titration in a nonaqueous medium. The chelation ion‐exchange properties were also studied with the batch equilibrium method. The resins were proved to be selective chelating ion‐exchange copolymers for certain metals. The chelation ion‐exchange properties of these copolymers were studied for Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, and Fe³⁺ ions. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymers showed a higher selectivity for Fe³⁺ ions than for Cu²⁺, Ni²⁺, Co²⁺, and Pb²⁺ ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Chelation ion‐exchange properties of copolymer resin derived from 4‐hydroxyacetophenone,oxamide, and formaldehyde

A copolymer (4‐HAOF) prepared by condensation of 4‐hydroxyacetophenone and oxamide with formaldehyde in the presence of an acid catalyst proved to be a selective chelating ion‐exchange copolymer for certain metals. Chelating ion‐exchange properties of this copolymer were studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁺ ions. A batch equilibrium method was employed in the study of the selectivity of metal‐ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Hg²⁺ ions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 787–790, 2003     

Terpolymer resin II: Synthesis,characterization, and ion‐exchange properties of 2,4‐dihydroxyacetophenone–dithiooxamide–formaldehyde terpolymers

Terpolymers have been prepared by the condensation of 2,4‐dihydroxyacetophenone (2,4‐HA) and dithiooxamide (D) with formaldehyde (F) in the presence of hydrochloric acid as catalyst with varying the molar proportions of the reactant. Compositions of the terpolymer have been determined by elemental analysis. The number average molecular weight has been determined by conductometric titration in nonaqueous medium. Intrinsic viscosities of the solution of the terpolymer have been determined in N,N‐dimethyl formamide (DMF). The terpolymers have been characterized by UV–visible, IR, and proton NMR spectra. Chelation ion‐exchange properties have also been studied employing the batch equilibrium method. It was employed to study selectivity of metal ion uptake over a wide pH range and in media of various ionic strength. The overall rate of metal uptake follows the order: Fe³⁺ > Cu²⁺ > Ni²⁺ > Co²⁺ = Zn²⁺. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Chelation properties of poly(2‐hydroxy‐4‐acryloyloxybenzophenone) resins toward some divalent metal ions

The chelation behavior of poly(2‐hydroxy‐4‐acryloyloxybenzophenone) [poly(2H4ABP) or polymer I ] obtained through the free‐radical polymerization of 2‐hydroxy‐4‐acryloyloxybenzophenone monomer and for crosslinked polymers prepared from the monomer and known amounts of the crosslinker divinylbenzene (DVB) [4 mol % of DVB for polymer II, 8 mol % of DVB for polymer III, and 16 mol 16% of DVB for polymer IV ] toward the divalent metal ions Cu²⁺, Ni²⁺, Zn²⁺, and Pb²⁺ in aqueous solution was studied by a batch equilibration technique as a function of contact time and pH. The effect of the crosslinker, DVB, was also studied. The metal‐ion uptake of the polymers was determined with atomic absorption spectroscopy, and the highest uptake was achieved at pH 7.0 for polymers I, II, III, and IV. The selectivity and binding capacity of the resins toward the investigated divalent metal ions are discussed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

X‐ray photoelectron,infrared, and Raman spectroscopy studies of novel submicrometric poly[(methacrylato)aluminum(III)]

Poly[(methacrylato)aluminum(III)] was prepared by applying γ‐radiation to the corresponding aluminum(III) methacrylate monomer. Scanning electron microscopy images show pellets of ～ 500 nm for the aluminum(III) methacrylate monomer, and submicrometric fibers‐made granules for the aluminum‐containing polymers. X‐ray photoelectron spectroscopy measurements reveal two peaks in the Al 2p core‐level spectra of the monomer and of the poly[(methacrylato)aluminum(III)], which means that two different coordination modes for the Al(III) ions might be present in these compounds. Infrared and Raman spectroscopy studies confirmed that the structure for this novel coordination polymer consists of hexa‐coordinated Al(III) ions linked by the carboxylate groups of methacrylate ligands, along with hydroxyl groups and coordinated water, in a combination of monodentate and bridging bidentate coordination modes. Hence, combination of spectroscopic methods is a helpful tool to get valuable information on the structure of nonmacrocrystalline coordination polymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5212–5223, 2006