Polyurethanes based on 2,2‐Dinitropropane‐1,3‐diol and 2,2‐bis(azidomethyl)propane‐1,3‐diol as potential energetic binders

On the base of 2,2‐bis(azidomethyl)propane‐1,3‐diol (BAMP) and 2,2‐dinitropropane‐1,3‐diol (DNPD) four different polyurethanes were synthesized in a polyaddition reaction using hexamethylene diisocyanate (HMDI) and diisocyanato ethane (DIE). The obtained prepolymers were mainly characterized using vibrational spectroscopy (IR) and elemental analysis. For determination of low and high temperature behavior, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used. Investigations concerning friction and impact sensitivities were carried out using a BAM drop hammer and friction tester. The energetic properties of the polymers were determined using bomb calorimetric measurements and calculated with the EXPLO5 V6.02 computer code. The obtained values were compared with the glycidyl azide polymer (GAP). The compounds turned out to be insensitive toward friction (>360 N) and less sensitive toward impact (40 J). The good physical stabilities, along with their sufficient thermal stability (170–210 °C) and moderate energetic properties renders these polymers into potential compounds for applications as binders in energetic formul;ations. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43991.     

Potential Energetic Plasticizers on the Basis of 2,2‐Dinitropropane‐1,3‐diol and 2,2‐Bis(azidomethyl)propane‐1,3‐diol

Different carboxylic acid derivatives of 2,2‐dinitropropane‐1,3‐diol (DNPD) and 2,2‐bis(azidomethyl)propane‐1,3‐diol (BAMP) were synthesized to investigate their suitability as energetic plasticizers. The syntheses were carried out using acyl chlorides of acetic, propionic, and butyric acid. The obtained products were characterized by elemental analysis, NMR, and IR spectroscopy. The energetic properties of the synthesized compounds were calculated on the basis of the computed heats of formation at the CBS‐4M level of theory using the EXPLO5 version 6.02 computer code. Investigations of physical stabilities were carried out using BAM drop hammer and friction tester. Low and high temperature behavior was determined by differential scanning calorimetry (DSC). The energetic and physical properties of the synthesized compounds were compared to the literature known energetic plasticizers N‐butyl nitratoethylnitramine (BuNENA) and diethylene glycol bis(azidoacetate) ester (DEGBAA). For analyzing the plasticizing abilities, mixtures of glycidyl azide polymer (GAP) and poly(3‐nitratomethyl‐3‐methyloxetan) (polyNIMMO) were prepared with both propionyl based compounds in different ratios and investigated regarding their glass transition temperatures and viscosity. Both compounds showed plasticizing effects in the range of BuNENA.     

Effect of the reaction conditions on the photopolymerization of methyl methacrylate by diethyl dithiocarbamato‐(1,2)‐propane diol

The photopolymerization of methyl methacrylate (MMA) through the use of diethyl dithiocarbamato‐(1,2)‐propane diol (DCPD) was studied. The photoinitiator was synthesized from 3‐chloro‐1,2‐propane diol and sodium diethyl dithiocarbamate in a solvent mixture of acetone and anhydrous ethanol. The photopolymerization was carried out in a Heber multilamp photochemical reactor (COMPACT‐LP‐MP88) (Heber Scientific, Chennai, India) at 254 nm. The effects of the reaction conditions on the polymerization of MMA were studied. The conversion and molecular weight increased with an increase in the monomer concentration and reaction time. However, for the DCPD‐to‐MMA molar ratio, a critical value was found for maximum conversion. The results suggested the living radical nature of the photoinitiator, which was further investigated by the preparation of a block copolymer with styrene. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2320–2328, 2005     

Poly(1,2‐diaminobenzene) and poly(1,3‐diaminobenzene): Synthesis,characterization, and properties

Poly(1,2‐diaminobenzene) (1,2‐DAB) and poly(1,3‐diaminobenzene) (1,3‐DAB) have been synthesized by using ammonium persulfate as oxidizing agent in the presence and in the absence of the following metal ion salts: CuCl₂, NiCl₂, and CoCl₂ with different HCl concentrations. The products showed a different content of the metal ion depending on the HCl concentration. The polymers were characterized by Fourier transform infrared (FTIR), ultraviolet‐visible (UV‐Vis) spectroscopy, thermal analysis, and electrical conductivity. The polymerization yield depended on the presence of metal ions that can react as oxidizing reagents and/or catalysts. The polymerization mechanism depended on the position of the substituent. For poly(1,2‐DAB) a ladder‐type structure was obtained, and for poly(1,3‐DAB) one similar to that of polyaniline. The thermal stability increased as the metal ion content in the polymer matrix increased. The electrical conductivity of the polymer did not depend on the metal ion content in the polymer. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2564–2572, 2002     

Synthesis,characterization, ion‐exchange,and antimicrobial study of poly[(2‐hydroxy‐4‐methoxybenzophenone) propylene] resin and its polychelates with lanthanides (III)

The polymeric ligand (resin) was prepared from 2‐hydroxy‐4‐methoxybenzophenone with 1,3‐propane diol in the presence of polyphosphoric acid as a catalyst on constant heating at 160°C for 13 h. The poly[(2‐hydroxy‐4‐methoxybenzophenone) propylene] (HMBP‐PD) form 1 : 2 metal/ligand polychelates (metal–polymer complexes) with La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), and Dy(III). The polymeric ligand and its polychelates (metal–polymer complexes) were characterized on the basis of elemental analyses, electronic spectra, magnetic susceptibilities, IR‐spectroscopy, NMR, and thermogravimetric analyses. The molecular weight was determined using number average molecular weight (M_n) by a vapor pressure osmometry (VPO) method. Activation energy ( E ) of the resin was calculated from differential scanning calorimetry (DSC). All the polychelates are paramagnetic in nature except La(III). Ion‐exchange studies at different electrolyte concentrations, pH, and rate have been carried out for lanthanides(III) metal ions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Boric acid recovery using polymer filtration: Studies with alkyl monool,diol, and triol containing polyethylenimines

Three water‐soluble polymers containing linear alkyl monool, 1,2‐diol, and 1,2,3‐triol groups, mostly on the primary amines of polyethylenimine, were synthesized, characterized, and tested for their ability to recover boric acid. The boron‐binding capacities of these polymers and the backbone polyethylenimine were determined by titration, ultrafiltration, and inductively coupled plasma/atomic emission spectroscopy analysis. At low boron concentrations, the 1,2,3‐triol polymer performed better than the 1,2‐diol, whereas at high boron concentrations, the 1,2‐diol outperformed the 1,2,3‐triol. ¹¹B‐NMR spectroscopy and retention studies with various salt concentrations indicated that boron interacted with these two polymers by means of ion pairing with the protonated amines and by borate ester formation. For the monool and the polyethylenimine backbone, the mechanism for boron binding was ion pairing only. These polymers are under consideration for the selective recovery and recycling of enriched boric acid used in the primary coolant loop of pressurized water nuclear reactors. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1590–1604, 2005     

Synthesis and Reactions of Enantiopure Substituted Benzene cis‐Hexahydro‐1,2‐diols

Enantiopure cis‐dihydro‐1,2‐diol metabolites, obtained from toluene dioxygenase‐catalysed cis‐dihydroxylation of six monosubstituted benzene substrates, have been converted to their corresponding cis‐hexahydro‐1,2‐diol derivatives by catalytic hydrogenation via their cis‐tetrahydro‐1,2‐diol intermediates. Optimal reaction conditions for total catalytic hydrogenation of the cis‐dihydro‐1,2‐diols have been established using six heterogeneous catalysts. The relative and absolute configurations of the resulting benzene cis‐hexahydro‐1,2‐diol products have been unequivocally established by X‐ray crystallography and NMR spectroscopy. Methods have been developed to obtain enantiopure cis‐hexahydro‐1,2‐diol diastereoisomers, to desymmetrise a meso‐cis‐hexahydro‐1,2‐diol and to synthesise 2‐substituted cyclohexanols. The potential of these enantiopure cyclohexanols as chiral reagents was briefly evaluated through their application in the synthesis of two enantiomerically enriched phosphine oxides from the corresponding racemic phosphine precursors.     

Melt‐processable and self‐healing poly(vinyl alcohol) elastomer containing diol groups in the side chain

A 3‐amino‐1,2‐propane diol functionalized poly(vinyl alcohol) elastomer (PVA–COO–AP) with melt processability and self‐healing properties was prepared by chemical graft modification, that is, a poly(vinyl alcohol) (PVA) carboxylation and carbodiimide reaction. Unlike that of conventional PVA modifiers, the incorporation of diol groups in the 3‐amino‐1,2‐propane diol molecules onto PVA chains reduced the breaking of intrinsic hydrogen‐bonding interactions of PVA because of the formation of new hydrogen bonds between the diol groups and the hydroxyl groups of PVA. PVA–COO–AP possessed a lower melting temperature and a higher decomposition temperature than PVA; this enabled the melt processing of PVA. The PVA–COO–AP samples prepared by compression molding exhibited excellent flexibility and elasticity, and the samples with a lower glass‐transition temperature below ambient temperature could be self‐healed because of the existence of dynamic hydrogen bonds. AP–COO–AP is believed to have potential applications in the fields of fibers and biomedical membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46050.     

Synthesis and characterization of organosoluble and transparent polyimides derived from trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride

A novel dianhydride, trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride (1,2‐CHDPA), was prepared through aromatic nucleophilic substitution reaction of 4‐nitrophthalonitrile with trans‐cyclohexane‐1,2‐diol followed by hydrolysis and dehydration. A series of polyimides (PIs) were synthesized from one‐step polycondensation of 1,2‐CHDPA with several aromatic diamines, such as 2,2′‐bis(trifluoromethyl)biphenyl‐4,4′‐diamine (TFDB), bis(4‐amino‐2‐trifluoromethylphenyl)ether (TFODA), 4,4′‐diaminodiphenyl ether (ODA), 1,4‐bis(4‐aminophenoxy)benzene (TPEQ), 4,4′‐(1,3‐phenylenedioxy)dianiline (TPER), 2,2′‐bis[4‐(3‐aminodiphenoxy)phenyl]sulfone (m‐BAPS), and 2,2′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]sulfone (6F‐BAPS). The glass transition temperatures (T_gs) of the polymers were higher than 198°C, and the 5% weight loss temperatures (T_d5%s) were in the range of 424–445°C in nitrogen and 415–430°C in air, respectively. All the PIs were endowed with high solubility in common organic solvents and could be cast into tough and flexible films, which exhibited good mechanical properties with tensile strengths of 76–105 MPa, elongations at break of 4.7–7.6%, and tensile moduli of 1.9–2.6 GPa. In particular, the PI films showed excellent optical transparency in the visible region with the cut‐off wavelengths of 369–375 nm owing to the introduction of trans‐1,2‐cyclohexane moiety into the main chain. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42317.     

Nitroalcohol induced hydrogel formation in amine‐functionalized polymers

Certain β‐nitroalcohols degrade under basic conditions or upon heating to form formaldehyde. This reaction provides an elegant approach to generate formaldehyde within a system at a desired time using the stimulus of pH or temperature. Using β‐nitroalcohols as a delivery agent for formaldehyde, polymer crosslinking can be induced via stimulus. Such an approach is akin to those used to prepare “self‐healing” polymers, which have received much attention recently. Herein, we describe the use of certain β‐nitroalcohols as a masked formaldehyde delivery system and demonstrate its use as a crosslinking agent of amine functionalized polymers to form hydrogels. We examine the temperature and pH dependence of 2‐nitro‐1,3‐propanediol and 2‐(hydroxymethyl)‐2‐nitro‐1,2‐propanediol on the rate and extent of gelation and characterize the resulting gel by swelling and FTIR experiments. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of 4,5‐bis(4‐fluorobenzoyl)‐1‐methylcyclohexene and its polyethers

A new difluoride 4,5‐bis(4‐fluorobenzoyl)‐1‐methylcyclohexene (DFKK) has been prepared with fumaryl chloride, fluorobenzene, and 2‐methyl‐1,3‐butadiene as starting materials through two steps of reactions. This DFKK monomer undergoes reaction with 2,2‐(p‐hydroxyphenyl)‐iso‐propane (BPA) in the presence of excess anhydrous potassium carbonate in sulfolane to give a high molecular weight reactive poly(ether ketone ketone) (PEKK) that is very soluble in solvents such as chloroform and N,N‐dimethylformamide at room temperature, has glass transition temperature of 182°C, and is easily cast into flexible and bale ivory film with tensile strength of 64 MPa. The 5% weight loss temperature is 407°C. Ring‐closing reaction of PEKK with hydrazine gives cyclized PEKK (CPEKK) with improved thermal stability and reduced solubility. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1866–1871, 2002; DOI 10.1002/app.10454     

Synthesis and characterization of new polyamides derived from 1,3‐(4‐carboxy phenoxy) propane and aromatic diamines

Six new polyamides 5a‐f containing flexible trimethylene segments in the main chain were synthesized through the direct polycondensation reaction of 1,3‐(4‐carboxy phenoxy) propane 3 with six derivatives of aromatic diamines 4a‐f in a medium consisting of N‐methyl‐2‐pyrrolidone, triphenyl phosphite, calcium chloride, and pyridine. The polycondensation reaction produced a series of novel polyamides containing flexible trimethylene segments in the main chain in high yield with inherent viscosities between 0.32 and 0.68 dL/g. The resulted polymers were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity, and solubility tests. Thermal properties of these polymers were investigated by using thermal gravimetric analysis (TGA) and differential thermal gravimetric (DTG). The glass‐transition temperatures of these polyamides were recorded between 165 and 190°C by differential scanning calorimetry, and the 10% weight loss temperatures were ranging from 360 to 430°C under nitrogen. 1,3‐(4‐Carboxy phenoxy) propane 3 was prepared from the reaction of 4‐hydroxy benzoic acid 1 with 1,3‐dibromo propane 2 in the presence of NaOH solution. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Light‐induced cooperative electron–proton transfer in hydrogen‐bonded networks of N,N‐diaryl substituted 1,4‐bisimines and meso‐1,2‐diaryl‐1,2‐ethanediols

The 1:1 cocrystallization of 1,4‐diaryl‐1,4‐bisimines (Ar–CHN–CH₂‐)₂ 4 – 11 and substituted meso‐1,2‐diaryl‐1,2‐ethanediols 1 – 3 leads to supramolecular structures in which the diol is hydrogen bonded by one of its hydroxy groups to an imine nitrogen atom of a 1,4‐bisimine. The second functionality in each molecule leads to the generation of ladderlike polymeric structures where each molecule of the diol is linked to two molecules of the 1,4‐bisimine and vice versa. If the diol carries electron donor groups in the aromatic residue and the 1,4‐bisimine correspondingly acceptor groups, then charge transfer interactions are observed. The excited CT complex which corresponds to a radical ion pair is stabilized by migration of a proton of a hydroxy group to the nitrogen atom of an imino group. This is supported by the appearance of a N–H vibration in the IR spectra. The reorganization is also accompanied by changes in the UV/Vis spectra and by the generation of paramagnetism in the crystalline material. The results represent a type of photochromism which has its origin in a light‐induced cooperative electron–proton transfer. The photochromism is thermally reversible.     

Synthesis,structure, and properties of new methacrylic derivatives of naphthalene‐2,3‐diol

The synthesis of a new monomer, 2,3‐(2‐hydroxy‐3‐methacryloyloxypropoxy)naphthalene, and its copolymerization with divinylbenzene is presented. This monomer was obtained from naphthalene‐2,3‐diol in a two‐step synthesis. Copolymers in the form of porous microspheres were prepared by a suspension‐emulsion polymerization method. As pore‐forming diluents, toluene, 1‐decanol, benzyl alcohol, and their mixtures were used. In studies of their porous structure, two methods were used: the adsorption of nitrogen at low temperatures, which provided information about the porous structure of the material in a dry state, and inverse exclusion chromatography, which provided information about the porous structure of the polymer swollen by a good solvent. The obtained results suggest that the porous structures for the dry and swollen polymers were different. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1886–1895, 2006     

Organosoluble and light‐colored fluorinated polyimides based on 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane and aromatic dianhydrides

A novel fluorinated diamine monomer, 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane (2), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride with 2,2‐bis(4‐hydroxyphenyl)propane in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Polyimides were synthesized from diamine 2 and various aromatic dianhydrides 3a–f via thermal imidization. These polymers had inherent viscosities ranging from 0.73 to 1.29 dL/g. Polyimides 5a–f were soluble in amide polar solvents and even in less polar solvents. These films had tensile strengths of 87–100 MPa, elongations to break of 8–29%, and initial moduli of 1.7–2.2 GPa. The glass transition temperatures (T_g) of 5a–f were in the range of 222–271°C, and the 10% weight loss temperatures (T₁₀) of them were all above 493°C. Compared with polyimides 6 series based on 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane (BAPP) and polyimides 7 based on 2,2‐Bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane (6FBAPP), the 5 series showed better solubility and lower color intensity, dielectric constant, and lower moisture absorption. Their films had cutoff wavelengths between 363 and 404 nm, b* values ranging from 8 to 62, dielectric constants of 2.68–3.16 (1 MHz), and moisture absorptions in the range of 0.04–0.35 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 922–935, 2005     

Polymerization of 1,3‐dienes containing functional groups: 8. Free‐radical polymerization of 2‐triethoxysilyl‐ 1,3‐butadiene

The presence of a bulky substituent at the 2‐position of 1,3‐butadiene derivatives is known to affect the polymerization behavior and microstructure of the resulting polymers. Free‐radical polymerization of 2‐triethoxysilyl‐1,3‐butadiene ( 1 ) was carried out under various conditions, and its polymerization behavior was compared with that of 2‐triethoxymethyl‐ and other silyl‐substituted butadienes. A sticky polymer of high 1,4‐structure ( ) was obtained in moderate yield by 2,2′‐azobisisobutyronitrile (AIBN)‐initiated polymerization. A smaller amount of Diels–Alder dimer was formed compared with the case of other silyl‐substituted butadienes. The rate of polymerization (R_p) was found to be R_p = k[AIBN]^0.5[ 1 ]^1.2, and the overall activation energy for polymerization was determined to be 117 kJ mol^?1. The monomer reactivity ratios in copolymerization with styrene were r ₁ = 2.65 and r_st = 0.26. The glass transition temperature of the polymer of 1 was found to be ?78 °C. Free‐radical polymerization of 1 proceeded smoothly to give the corresponding 1,4‐polydiene. The 1,4‐E content of the polymer was less compared with that of poly(2‐triethoxymethyl‐1,3‐butadiene) and poly(2‐triisopropoxysilyl‐1,3‐butadiene) prepared under similar conditions. Copyright © 2010 Society of Chemical Industry     

Novel phosphorus‐containing dicyclopentadiene‐modified phenolic resins for flame‐retardancy applications

2‐[4‐(2‐hydroxyphenyl)tricyclo[5.2.1.0^2,6]dec‐8‐yl]phenol (HPTCDP) were prepared from dicyclopentadiene (DCPD) and phenol via Friedel‐Crafts alkylation. DCPD‐containing phenolic resin (DPR) was also synthesized by incorporating the DCPD‐containing monomer HPTCDP with formaldehyde. DPR was further modified by grafting the phosphate group. The phosphorylation was confirmed by a Fourier transform infrared, ³¹P‐NMR spectroscopy, and an element analysis. The phosphorus content in the DPR could be successfully tailored to give values of 3.46 to 7.79 wt % by varying the feeding ratios of the phosphorus group. The thermal stabilities of the phosphorus‐containing polymers were identified by differential scanning calorimeter and thermogravimetric analysis. The glass transition temperature values were decreased as the content of phosphorus increased. High char yield 39–47 wt % in thermogravimetric analysis evaluation and limiting oxygen index values of 27 to 34 were found for all the phosphorylated phenolic resins. Such properties make these polymers highly promising for flame‐retardant applications. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 342–349, 2001     

Enantioselective Biooxidation of Racemic trans‐Cyclic Vicinal Diols: One‐Pot Synthesis of Both Enantiopure (S,S)‐Cyclic Vicinal Diols and (R)‐α‐Hydroxy Ketones

Highly regio‐ and enantioselective alcohol dehydrogenases BDHA (2,3‐butanediol dehydrogenase from Bacillus subtilis BGSC1A1), CDDHPm (cyclic diol dehydrogenase from Pseudomonas medocina TA5), and CDDHRh (cyclic diol dehydrogenase from Rhodococcus sp. Moj‐3449) were discovered for the oxidation of racemic trans‐cyclic vicinal diols. Recombinant Escherichia coli expressing BDHA was engineered as an efficient whole‐cell biocatalyst for the oxidation of (±)‐1,2‐cyclopentanediol, 1,2‐cyclohexanediol, 1,2‐cycloheptane‐diol, and 1,2‐cyclooctanediol, respectively, to give the corresponding (R)‐α‐hydroxy ketones in >99% ee and (S,S)‐cyclic diols in >99% ee at 50% conversion in one pot. Escherichia coli (BDHA‐LDH) co‐expressing lactate dehydrogenase (LDH) for intracellular regeneration of NAD⁺ catalyzed the regio‐ and enantioselective oxidation of (±)‐1,2‐dihydroxy‐1,2,3,4‐tetrahydronaphthalene to produce the corresponding (R)‐α‐hydroxy ketone in >99% ee and (S,S)‐cyclic diol in 96% ee at 49% conversion. Preparative biotransformations were also demonstrated. Thus, a novel and useful method for the one‐pot synthesis of both vicinal diols and α‐hydroxy ketones in high ee was developed via highly regio‐ and enantioselective oxidations of the racemic vicinal diols.

     

Synthesis and properties of sulfonated aromatic fluoro‐polymers

Polycondensation of perfluorobiphenyl with α,α‐bis(4‐hydroxyphenyl)ethylbenzene and/or 9,9‐bis(4‐hydroxyphenyl)fluorene was investigated. The polycondensation of perfluorobiphenyl with α,α‐bis(4‐hydroxyphenyl)ethylbenzene and/or 9,9‐bis(4‐hydroxyphenyl)fluorene proceeded at low‐temperature to a give high‐molecular weight and thermal stable polymers. The ¹⁹F‐NMR spectra of the polymers indicate that the polymers consists of predominantly 1,4‐phenylene structure with respect to the perfluoro‐aromatic compound. The sulfonation of the polymers obtained from the polycondensation occurred at the phenyl groups and fluorenyl side chain. A tough and smooth film was prepared by a casting method from DMF solution of the sulfonated polymer. The films showed hydrolytic and oxidative stabilities, and a high‐proton conductivity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of Valuable Chiral Intermediates by Isolated Ketoreductases: Application in the Synthesis of α‐Alkyl‐β‐hydroxy Ketones and 1,3‐Diols

Regio‐ and stereoselective reductions of α‐substituted 1,3‐diketones to the corresponding β‐keto alcohols or 1,3‐diols by using commercially available ketoreductases (KREDs) are described. A number of α‐monoalkyl‐ or dialkyl‐substituted symmetrical as well as non‐symmetrical diketones were reduced in high optical purities and chemical yields, in one or two enzymatic reduction steps. In most cases, two or even three out of the four possible diastereomers of α‐alkyl‐β‐keto alcohols were synthesized by using different enzymes, and in two examples both ketones were reduced to the 1,3‐diol. By replacing the α‐alkyl substituent with the OAc group, 1‐keto‐2,3‐diols, as well as 1,2,3‐triols were synthesized in high optical purities. These enzymatic reactions provide a simple, highly stereoselective and quantitative method for the synthesis of different diastereomers of valuable chiral synthons from non‐chiral, easily accessible 1,3‐diketones.