Synthesis and characterization of poly(L‐lactic acid)‐b‐poly(ethylene terephthalate‐co‐sebacate)‐b‐poly(L‐lactic acid) copolyesters

Random copolyester namely, poly(ethylene terephthalate‐co‐sebacate) (PETS), with relatively lower molecular weight was first synthesized, and then it was used as a macromonomer to initiate ring‐opening polymerization of l ‐lactide. ¹H NMR quantified composition and structure of triblock copolyesters [poly(l ‐lactic acid)‐b‐poly(ethylene terephthalate‐co‐sebacate)‐b‐poly(l ‐lactic acid)] (PLLA‐PETS‐PLLA). Molecular weights of copolyesters were also estimated from NMR spectra, and confirmed by GPC. Copolyesters exhibited different solubilities according to the actual content of PLLA units in the main chain. Copolymerization effected melting behaviors significantly because of the incorporation of PETS and PLLA blocks. Crystalline morphology showed a special pattern for specimen with certain composition. It was obvious that copolyesters with more content of aromatic units of PET exhibited increased values in both of stress and modulus in tensile test. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Composition,thermal properties,and biodegradability of a new biodegradable aliphatic/aromatic copolyester

A series of new aliphatic/aromatic copolyesters [poly(hexylene terephthalate‐co‐hexylene adipate) (PHTA)] were synthesized on the bases of 1,6‐hexanediol, adipic acid, and dimethyl terephthalate and characterized by gel permeation chromatography, ¹H‐NMR, wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and compost testing. ¹H‐NMR results show that the compositions of the copolyesters were in accordance with the feed molar ratios. The WAXD patterns indicated that the crystal structures of the PHTA copolyesters were determined by the dominant crystal units, and the copolyesters became less crystallizable, even amorphous, with increasing comonomer content. The DSC curves showed that the glass‐transition temperatures (T_g′s) of the PHTA copolyesters decreased linearly, and both the melting temperature (T_m) and heat of fusion decreased first and then increased with increasing hexylene adipate unit content. Under compost conditions, PHTA copolyesters with less than 60 mol % aromatic units were biodegradable. Particularly, compared with the copolyester poly(butylene terephthalate‐co‐butylene adipate), the PHTA copolyester with the same aliphatic/aromatic composition possessed a lower T_g and T_m and better biodegradability. Additionally, the biodegradability of the copolyesters could be predicted by the number‐average sequence length of aromatic units, T_g, and the temperature difference between T_m and the temperature at which biodegradation took place. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Crystallization and photo‐curing kinetics of biodegradable poly(butylene succinate‐co‐butylene fumarate) short‐segmented block copolyester

Short‐segmented block copolymers of poly(butylene succinate‐co‐butylene fumarate) were synthesized and their crystallinity and crosslinking behavior were investigated. ¹H NMR was used to characterize the microstructure and composition of the copolyesters. Molecular weight determination was performed using gel permeation chromatography. Based on the DSC results all copolyesters were crystalline and the degree of crystallinity of the copolymers did not change with butylene fumarate mole fraction due to co‐crystallization of the butylene succinate and butylene fumarate groups. Crosslinked copolyesters showed a lower crystallization rate and degree of crystallinity while the crystallization temperature shifted to higher temperatures compared with uncrosslinked copolyesters due to the formation of nucleating agents by crosslinkages. Photo‐DSC was used to investigate the crosslinking kinetics for UV‐initiated photo‐curing. Three kinetics parameters including the rate constant (k) and the orders of the initiation and propagation reactions (m and n, respectively) were determined for the quenched and unquenched copolymers. © 2016 Society of Chemical Industry     

Characterization and biodegradability of poly(butylene adipate‐co‐succinate)/poly(butylene terephthalate) copolyester

Characterization of poly(butylene adipate‐co‐succinate) (PBAS)/poly(butylene terephthalate) (PBT) copolyesters resulting from the intermolecular ester‐exchange reaction between molten PBAS and PBT have been analyzed using ¹H‐NMR spectroscopy, differential scanning calorimetry, wide‐angle X‐ray diffraction, and total organic carbon lab analyzer. Using the assignment of proton resonance due to homogeneous and heterogeneous dyads, the average block lengths were investigated over the entire range of copolymer composition. A decrease in melting temperature was observed with the increase of a terephthalate unit in the composition. The result of X‐ray diffraction curve matches well with that of average block length and thermal property. When a rich component is crystallized, the poor component is excluded completely in a crystal formation. The biodegradability in copolyesters also depended on the terephthalate unit in the composition and average block length of the aromatic unit. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 593–608, 1999     

Characterization of the mechanical properties,crystallization, and enzymatic degradation behavior of poly(butylene succinate‐co‐ethyleneoxide‐co‐DL‐lactide) copolyesters

A series of aliphatic biodegradable poly (butylene succinate‐co‐ethyleneoxide‐co‐DL ‐lactide) copolyesters were synthesized by the polycondensation in the presence of dimethyl succinate, 1,4‐butanediol, poly(ethylene glycol), and DL ‐oligo(lactic acid) (OLA). The composition, as well as the sequential structure of the copolyesters, was carefully investigated by ¹H‐NMR. The crystallization behaviors, crystal structure, and spherulite morphology of the copolyesters were analyzed by differential scanning calorimetry, wide angle X‐ray diffraction, and polarizing optical microscopy, respectively. The results indicate that the sequence length of butylene succinate (BS) decreased as the OLA feed molar ratio increasing. The crystallization behavior of the copolyesters was influenced by the composition and sequence length of BS, which further tuned the mechanical properties of the copolyesters. The copolyesters formed the crystal structures and spherulites similar to those of PBS. The incorporation of more content of ethylene oxide (EO) units into the copolyesters led to the enhanced hydrophilicity. The more content of lactide units in the copolyesters facilitated the degradation in the presence of enzymes. The morphology of the copolyester films after degradation was also studied by the scanning electron microscopy. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characteristics of biodegradable copolyesters from the transesterification of poly(butylene adipate‐co‐succinate) and poly(ethylene terephthalate)

Poly(butylene adipate‐co‐succinate) (PBAS), an aliphatic polyester, is known for its excellent biodegradability, but its physical and mechanical properties are poor. To improve the physical properties, stiff aromatic rings were added to PBAS through transesterification with poly(ethylene terephthalate) (PET). New biodegradable copolyesters were prepared by the intermolecular ester‐exchange reactions between molten PBAS and PET. The transesterification reaction was carried out at 280°C without a catalyst. The newly synthesized copolyesters were characterized with ¹H‐NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The mechanical properties were measured with a universal test machine, and the biodegradability was also investigated. By the new peaks appearing in ¹H‐NMR spectra of the copolyesters, the occurrence of the transesterification reaction between PBAS and PET was confirmed. A reduction of the melting temperature was observed for the copolyesters. The elongations at break of the new copolyesters increased for all compositions and reaction times, in comparison with PBAS. However, the tensile strength decreased with the induction of terephthalate units in the copolyesters. The biodegradability of the copolyesters also depended on the number of terephthalate units. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3266–3274, 2004     

Synthesis,characterization, and properties of biodegradable poly(butylene succinate) modified with imide dihydric alcohol

A series of high molecular weight poly (butylene succinate) and its copolyester containing rigid imide units were synthesized in this article. The chemical structure and composition of the copolyesters were determined by ¹H NMR spectroscopy and Fourier transform infrared spectroscope (FT‐IR). The thermal properties, crystallization behavior and mechanical properties of polymers were investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), wide‐angle X‐ray diffraction (WAXD) and mechanical testing. The enzymatic degradation was investigated using pancreatic lipase solution. The results showed that the melting temperature (T_m) of the copolyester decreased with the increment in pyromellitic imide unit content. However, the thermal degradation temperature (5% decomposition temperature) changed little. Meanwhile, the enzymatic degradation rate of poly (butylene succinate) was enhanced. The mechanical properties showed that the tensile strength had a trend of decrease, but the elongation at break was improved with the increment in imide units. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40807.     

Synthesis and characterization of biodegradable aliphatic copolyesters with poly(tetramethylene oxide) soft segments

A series of aliphatic poly(ether–ester)s based on flexible poly(tetramethylene oxide) (PTMO) and hard poly (butylene succinate) (PBS) segments were synthesized by the catalyzed two‐step transesterification reaction of dimethyl succinate, 1,4‐butanediol, and α,ω‐hydroxy‐terminated PTMO (M_n = 1000 g/mol) in the bulk. The content of soft PTMO segments in the polymer chains was varied from 10 to 50 mass %. The effect of the introduction of the soft segments on the structure, thermal, and physical properties, as well as on the biodegradation properties was investigated. The composition and structure of the aliphatic segmented copolyesters were determined by ¹H NMR spectroscopy. The molecular weights of the polyesters were verified by viscometry of dilute solutions and polymer melts. The thermal properties were investigated using DSC. The degree of crystallinity was determined by means of DSC and WAXS. Biodegradation of the synthesized copolyesters, estimated in enzymatic degradation tests on polymer films in phosphate buffer solution with Candida rugosa lipase at 37°C, was compared with hydrolytic degradation in the buffer solution. Viscosity measurements confirmed that there was no change in molecular weight of the copolyesters leading to the conclusion that the degradation mechanism of poly(ester–ether)s based on PTMO segments occurs through the surface erosion. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Poly(ethylene terephthalate) copolymers that contain 5‐tert‐butylisophthalic acid and 1‐3/1‐4‐cyclohexanedimethanol: Synthesis,characterization, and properties

The effects of incorporating 5‐tert‐butylisophthalic acid (^tBI) and 1‐3/1‐4 cyclohexanedimethanol (CHDM) in the polymer chain of poly(ethylene terephthalate) (PET) on the crystallization behavior and thermal, optical and tensile properties of this polyester (PETGB) were evaluated. These random copolyesters that contained between 0 and 20 mol % of CHDM and between 0 and 10 mol % of ^tBI units were prepared by esterification followed by melt copolycondensation. The compositions and molecular weights of the copolyesters were determined by ¹H‐NMR spectroscopy and viscometry, respectively. The composition of the polyester was consistent with the composition of the feed. The intrinsic viscosities of the copolymers ranged between 0.62 and 0.74 dL/g. The thermal behaviors were investigated over the entire range of copolymer compositions, using DSC under the heating and cooling rate of 20°C/min and TGA. The copolyesters with ^tBI and CHDM of < 20 mol % were crystallizable, whereas the copolyesters with ^tBI and CHDM of ≥ 20 mol % were amorphous. They appeared to be stable up to 395°C. The optical transmissions of the amorphous polyesters were more than 88% in the visible region. The mechanical behavior was investigated by performing a tensile test. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 279–285, 2007     

Synthesis and characterization of the biodegradable copolymers from succinic acid and adipic acid with 1,4-butanediol

Biodegradable homopolyesters such as poly(butylene succinate) (PBSU) and poly(butylene adipate) (PBAD) and copolyesters such as poly(butylene succinate-co-butylene adipate) (PBSA) were synthesized, respectively, from succinic acid (SA) and adipic acid (AA) with 1,4-butanediol through a two-step process of esterification and deglycolization. The polyester compositions and physical properties of both homopolyesters and copolyesters were investigated by ¹H– and ¹³C–NMR, DSC, GPC, WAXD, and optical polarizing microscopy. The melting point (T_m) of these copolyesters decreased gradually as the contents of butylene adipate increased and the glass-transition temperature (T_g) of these copolyesters decreased linearly as the contents of the adipoyl unit increased. PBSA copolyesters showed two types of XRD patterns of PBSU and PBAD homopolyesters. Furthermore, the biodegradation and hydrolytic degradation of the high molecular weight PBSU homopolyester, PBAD homopolyester, and PBSA copolyesters were investigated in the composting soil and NH₄Cl aqueous solutions at a pH level of 10.6. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2808–2826, 2001     

Hydrolytic degradation of biobased poly(butylene succinate‐co‐furandicarboxylate) and poly(butylene adipate‐co‐furandicarboxylate) copolyesters under mild conditions

It is indispensable to investigate hydrolytic degradation behavior to develop novel (bio)degradable polyesters. Biobased and biodegradable copolyesters poly(butylene adipate‐co ‐butylene furandicarboxylate) (PBAF) and poly(butylene succinate‐co ‐butylene furandicarboxylate) (PBSF) with BF molar fraction (?_BF) between 40 and 60% were synthesized in this study. The hydrolytic degradation of film samples was conducted in a pH 7.0 PBS buffer solution at 25 °C. Slight mass loss (1–2%) but significant decrease in intrinsic viscosity (35–44%) was observed after 22 weeks. The apparent hydrolytic degradation rate decreased with increasing ?_BF and initial crystallinity. Meanwhile, PBAFs degraded slightly faster than PBSFs with the same composition. The ?_BF and crystallinity increased slowly with degradation time, suggesting the aliphatic moiety and the amorphous region are more susceptible to hydrolysis. And high enough tensile properties were retained after hydrolysis degradation, indicating PBAF and PBSF copolyesters are hydrolytically degradable, with tunable hydrolytic degradation rate and good balance between hydrolytic degradability and durability. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44674.     

Synthesis and characterization of biodegradable poly(butylene succinate‐co‐propylene succinate)s

Biodegradable polyesters such as poly(butylene succinate) (PBS), poly(propylene succinate) (PPS), and poly(butylene succinate‐co‐propylene succinate)s (PBSPSs) were synthesized respectively, from 1,4‐succinic acid with 1,4‐butanediol and 1,3‐propanediol through a two‐step process of esterification and polycondensation in this article. The composition and physical properties of both homopolyesters and copolyesters were investigated via ¹H NMR, DSC, TGA, POM, AFM, and WAXD. The copolymer composition was in good agreement with that expected from the feed composition of the reactants. The melting temperature (T_m), crystallization temperature (T_c), crystallinity (X), and thermal decomposition temperature (T_d) of these polyesters decreased gradually as the content of propylene succinate unit increased. PBSPS copolyesters showed the same crystal structure as the PBS homopolyester. Besides the normal extinction crosses under the polarizing optical microscope, the double‐banded extinction patterns with periodic distance along the radial direction were also observed in the spherulites of PBS and PBSPS. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization and properties of biodegradable poly(butylene succinate)‐block‐poly(propylene glycol) segmented copolyesters

BACKGROUND: To obtain a biodegradable thermoplastic elastomer, a series of poly(ester‐ether)s based on poly(butylene succinate) (PBS) and poly(propylene glycol) (PPG), with various mass fractions and molecular weights of PPG, were synthesized through melt polycondensation. RESULTS: The copolyesters were characterized using ¹H NMR, gel permeation chromatography, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis, mechanical testing and enzymatic degradation. The results indicated that poly(ester‐ether)s with high molecular weights were successfully synthesized. The composition of the copolyesters agreed very well with the feed ratio. With increasing content of the soft PPG segment, the glass transition temperature decreased gradually while the melting temperature, the crystallization temperature and the relative degree of crystallinity decreased. Mechanical testing demonstrated that the toughness of PBS was improved significantly. The elongation at break of the copolyesters was 2–5 times that of the original PBS. Most of the poly(ester‐ether) specimens were so flexible that they were not broken in Izod impact experiments. At the same time, the enzymatic degradation rate of PBS was enhanced. Also, the difference in molecular weight of PPG led to properties being changed to some extent among the copolyesters. CONCLUSION: The synthesized poly(ester‐ether)s having excellent flexibility and biodegradability extend the application of PBS into the areas where biodegradable thermoplastic elastomers are needed. Copyright © 2009 Society of Chemical Industry     

Effective biosynthesis of poly(3‐hydoxy‐ butyrate‐co‐4‐hydroxybutyrate) with high 4‐hydroxybutyrate fractions by Wautersia eutropha in the presence of α‐amino acids

BACKGROUND: Biopolymers produced by microbes are in demand as their biodegradable and biocompatible properties make them suitable for disposable products and for potential use as biomaterials for medical applications. The effective microbial production of copolyesters of 3‐hydroxybutyrate (3HB) and 4‐hydroxybutyrate(4HB) with high molar fractions of 4HB unit by a wild‐type Wautersia eutropha H16 was investigated in culture media containing 4‐hydroxybutyric acid (4HBA) and different carbon substrates in the presence of various α‐amino acids. RESULTS: The addition of carbon sources such as glucose, fructose and acetic acid to the culture medium containing 4HBA in the presence of α‐amino acids resulted in the production of random poly(3HB‐co‐4HB) with compositions of up to 77 mol% 4HB unit, but the yields of copolyesters with 60–77 mol% 4HB units were less than 15 wt% of dried cell weights. In contrast, when carbon sources such as propionic acid and butyric acid were used as the co‐substrates of 4HBA in the presence of α‐amino acids, poly(3HB‐co‐4HB) copolyesters with compositions of 72–86 mol% 4HB were produced at maximally 47.2 wt% of dried cell weight (11.3 g L^?1) and the molar conversion yield of 4HBA to 4HB fraction in copolyesters was as high as 31.4 mol%. Further, poly(3HB‐co‐4HB) copolyesters with compositions of 93–96 mol% 4HB were isolated at up to 35.2 wt% of dried cell weights by fractionation of the above copolymers with chloroform/n‐hexane. CONCLUSION: The productivity of copolyesters with over 80 mol% 4HB fractions was as high as 0.146 g L^?1 h^?1 (3.51 g L^?1 for 24 h) by flask batch cultivation. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of poly(L‐lactide‐co‐ϵ‐caprolactone)‐b‐poly(L‐lactide) biodegradable diblock copolyesters: Effect of the block lengths on their thermal properties

Poly(L ‐lactide‐co‐ε‐caprolactone)‐b‐poly(L ‐lactide) [P(LL‐co‐CL)‐b‐PLL] diblock copolyesters were synthesized in a two‐step process with 1‐dodecanol (DDC) and stannous octoate as the initiating system. In the first‐step reaction, a 50:50 mol % amorphous poly(L ‐lactide‐co‐ε‐caprolactone) [P(LL‐co‐CL)] copolyester was synthesized via the bulk copolymerization of L ‐lactide and ε‐caprolactone, which was followed by the polymerization of the PLL crystalline block at the end chain in the second‐step reaction. The yielded copolyesters were characterized with dilute‐solution viscometry, gel permeation chromatography, ¹H‐ and ¹³C‐NMR, and differential scanning calorimetry methods. The molecular weights of the P(LL‐co‐CL) copolyesters from the first‐step reaction were controlled by the DDC concentrations, whereas in the second‐step reaction, the molecular weights of the P(LL‐co‐CL)‐b‐PLL diblock copolyesters depended on the starting P(LL‐co‐CL) copolyester molecular weights and L ‐lactide/prepolymer molar ratios. The starting P(LL‐co‐CL) copolyester molecular weights and PLL block lengths seemed to be the main factors affecting specific thermal properties, including the melting temperature (T_m), heat of melting (ΔH_m), crystallizing temperature (T_c), and heat of crystallizing (ΔH_c), of the final P(LL‐co‐CL)‐b‐PLL diblock copolyester products. T_m, ΔH_m, T_c, and ΔH_c increased when the PLL block lengths increased. However, these thermal properties of the diblock copolyesters also decreased when the P(LL‐co‐CL) block lengths increased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Syntheses,characterization, and hydrolytic degradation of P(ε‐caprolactone‐co‐δ‐valerolactone) copolymers: Influence of molecular weight

Biodegradable poly(ε‐caprolactone‐co‐δ‐valerolactone) copolymers were synthesized and investigated to study their behavior in aqueous medium. The copolyesters were produced by ring opening polymerization between ε‐caprolactone (CL) and δ‐valerolactone (VL) in bulk at 140°C using tin(II) octoate as catalyst. They were characterized by using ¹H NMR, size exclusion chromatography, differential scanning calorimetry, and MALDI TOF mass spectrometry. Reactivity ratio determination gave an insight on their microstructure. Hydration, hydrolytic degradation, and biocide release of P(CL‐VL) films with different molecular weights values were studied. A one‐order kinetic whose rate constant decreases with copolymer macromolecular weight was observed. Although the molecular weight decrease remained relatively weak after 8 months of immersion, a correlation between molecular weight and hydrolysis rate was shown by high performance liquid chromatography‐mass spectrometry. The ability of the P(CL‐VL) films to release active compounds dispersed in the films was studied by atomic absorption spectroscopy. The release behavior of all copolymers was identical with a zero‐order kinetic. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43007.     

Synthesis and thermal characterization of random poly(butylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) copolyesters

Poly(butylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) (PBT/MET) was synthesized by incorporating 1,2‐propandiol(1,2‐PDO) into PBT chains. The molar composition and chemical structure of PBT/MET copolyesters were confirmed by means of FT‐IR and ¹H‐NMR. To investigate the effect of 1,2‐PDO on the thermal properties of PBT/MET copolyesters, the copolymerizations were carried out by varying various contents of MET units, and the prepared materials were evaluated by differential scanning calorimetry and thermogravimetric analysis. Results suggested that with the increase of the content of 1,2‐PDO, the amount of crystallinity and the melting temperature decline, while the glass transition temperature increases and the copolyesters become more transparent and brittle with respect to PBT homopolymer. In addition, the T_g‐composition and T_m‐composition data are well subjected to the Wood equation and Flory's equation, respectively. All these copolyesters are found to consist of the general trend displayed by copolymers reported elsewhere. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nonisothermal crystallization behavior of biodegradable poly(butylene terephthalate‐co‐butylene adipate‐co‐ethylene terephthalate‐co‐ethylene adipate) copolyester

A series of biodegradable aliphatic‐aromatic copolyester, poly(butylene terephthalate‐co‐butylene adipate‐co‐ethylene terephthalate‐co‐ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4‐butanediol (BG) and ethylene glycol (EG) by direct esterification and polycondensation. The nonisothermal crystallization behavior of PBATE copolyesters was studied by the means of differential scanning calorimeter, and the nonisothermal crystallization kinetics were analyzed via the Avrami equation modified by Jeziorny, Ozawa analysis and Z.S. Mo method, respectively. The results show that the crystallization peak temperature of PBATE copolyesters shifted to lower temperature at higher cooling rate. The modified Avrami equation could describe the primary stage of nonisothermal crystallization of PBATE copolyesters. The value of the crystallization half‐time (t_1/2) and the crystallization parameter (Z_c) indicates that the crystallization rate of PBATE copolyesters with more PTA content was higher than that with less PTA at a given cooling rate. Ozawa analysis was not suitable to study the nonisothermal crystallization process of PBATE copolyesters, but Z.S. Mo method was successful in treatingthis process. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Synthesis and characterization of copolymeric aliphatic–aromatic esters derived from terephthalic acid, 1,4‐butanediol,and ε‐caprolactone by physical,thermal, and mechanical properties and NMR measurements

In this study, a series of aliphatic–aromatic poly(butylene terephthalate‐co‐ε‐caprolactone) (PBTCL) copolyesters were synthesized from various monomeric compositions of terephthalic acid (TPA), 1,4‐butanediol (BDO), and ε‐caprolactone (CL) in the presence of tetrabutyl titanate (Ti(Obu)₄) and stannous octoate (Sn(Oct)₂) as catalysts through a combination of polycondensation and ring opening polymerization. A significant increase in the melting temperature (T_m) of copolyesters was observed by increasing the TPA/(CL+TPA) molar ratio, starting from the low end (T_m 66.2°C) of pure poly‐ε‐caprolactone PCL upward. We found that PBTCL‐50, which has a TPA/(CL+TPA) 50% molar ratio and polycondensation at 260°C for 1.5 h, resulted in a proper T_m of 139.2°C that facilitates thermal extrusion from biomass or other biodegradable polymers of similar T_m. The number–average molecular weight (M_n) of 7.4 × 10⁴ for PBTCL‐50 was determined from the intrinsic viscosity [η] by using the Berkowitz model of M_n = 1.66 × 10⁵[η]^0.9. Good mechanical properties of PBTCL‐50 have been shown by tensile stretching experiment that indicates tensile strength, elongation, and Young's modulus are 11.9 MPa, 132%, and 257 MPa, respectively. Polymers with aforementioned properties are suitable for manufacturing biodegradable plastic films for downstream agricultural applications or merely for trash bag. This article reveals that the PBTCL‐50 contains all five monomers with different molar ratios and characteristical linkages between each other. The novel structure was furthermore analyzed by ¹H‐ and ¹³C‐NMR spectroscopy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of random poly(butylene alkylate-co-terephthalate)s with different methylene group contents: crystallization and degradation kinetics

Random copolyesters having 1,4-butanediol units were synthesized from a transesterification process between homopolymers constituted by aliphatic dicarboxylates (i.e. succinate, adipate or sebacate) and the aromatic therephthalate derivative, as verified by NMR spectroscopy. Biodegradability of resulting copolyesters was studied via enzymatic hydrolysis using Pseudomonas cepacia lipase at pH = 7.2 and 37 °C. Kinetics of degradation showed that in all cases the degradation rate decreased after 19 days of exposure. The observed glass transition temperatures, T _g, of the random copolyesters showed a non-linear dependence on composition, a feature that was explained in terms of the internal stiffening effect of butylene terephthalate units. Copolymers with higher aliphatic (i.e. 50 and 70 mol-%) and methylene (i.e. adipate and sebacate units) contents showed double melting peaks in DSC thermograms. These copolyesters resulted in two different crystalline rich phases after melt-crystallization and subsequent cooling. The ratio between these phases logically depended on the predominant aliphatic or aromatic dicarboxylate content. The copolymers initially crystallized via the aromatic units through a heterogeneous nucleation and a spherulitic growth. The presence of aliphatic dicarboxylate units hindered the beginning of the crystallization process, but the overall growth kinetic constant was similar for all samples. The secondary nucleation constants were determined and showed higher values for samples with higher adipate and sebacate contents.