Novel electrically conductive and ferromagnetic composites of poly(aniline‐co‐aminonaphthalenesulfonic acid) with iron oxide nanoparticles: Synthesis and characterization

Nanocomposites of iron oxide (Fe₃O₄) with a sulfonated polyaniline, poly(aniline‐co‐aminonaphthalenesulfonic acid) [SPAN(ANSA)], were synthesized through chemical oxidative copolymerization of aniline and 5‐amino‐2‐naphthalenesulfonic acid/1‐amino‐5‐naphthalenesulfonic acid in the presence of Fe₃O₄ nanoparticles. The nanocomposites [Fe₃O₄/SPAN(ANSA)‐NCs] were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, elemental analysis, UV–visible spectroscopy, thermogravimetric analysis (TGA), superconductor quantum interference device (SQUID), and electrical conductivity measurements. The TEM images reveal that nanocrystalline Fe₃O₄ particles were homogeneously incorporated within the polymer matrix with the sizes in the range of 10–15 nm. XRD pattern reveals that pure Fe₃O₄ particles are having spinel structure, and nanocomposites are more crystalline in comparison to pristine polymers. Differential thermogravimetric (DTG) curves obtained through TGA informs that polymer chains in the composites have better thermal stability than that of the pristine copolymers. FTIR spectra provide information on the structure of the composites. The conductivity of the nanocomposites (～ 0.5 S cm^?1) is higher than that of pristine PANI (～ 10^?3 S cm^?1). The charge transport behavior of the composites is explained through temperature difference of conductivity. The temperature dependence of conductivity fits with the quasi‐1D variable range hopping (quasi‐1D VRH) model. SQUID analysis reveals that the composites show ferromagnetic behavior at room temperature. The maximum saturation magnetization of the composite is 9.7 emu g^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Graft polymerization synthesis and application of magnetic Fe3O4/polyacrylic acid composite nanoparticles

Fe₃O₄ magnetic nanoparticles were prepared by coprecipitation using NH₃ · H₂O as the precipitating agent, and were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X‐ray powder diffraction (XRD). The compatibility between the Fe₃O₄ nanoparticles and water were enhanced by grafting acrylic acid onto the nanoparticle surface. FTIR, XRD, thermogravimetry (TG), and differential scanning calorimetry (DSC) were used to characterize the resultant sample. The effects of initiator dosage, monomer concentration, and reaction temperature on the characteristics of surface‐modified Fe₃O₄ nanoparticles were investigated. Moreover, magnetic fluids (MF), prepared by dispersing the PAA grafted Fe₃O₄ nanoparticles in water, were characterized using UV–vis spectrophotometer, Gouy magnetic balance, and laser particle‐size analyzer. The rheological characteristics of magnetic fluid were investigated using capillary and rotating rheometers. The MF was added to prepare PVA thin film to improve mechanical properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Magnetic Fe3O4@ polydopamine biopolymer: Synthesis,characterization and fabrication of promising nanocomposite

In this work, Functional Fe₃O₄@ polydopamine nanocomposite (Fe₃O₄@PDA) with magnetic response and special surface area were successfully assembled utilizing the strong coordination interactions between these two versatile materials. The morphology and size, crystal structure, specific saturation magnetization, chemical structure, and thermal properties were characterized by transmission electron microscopy (TEM), X‐ray diffraction (XRD), vibration magnetometer (VSM), point of zero charge (pH_pzc), Fourier infrared (FT‐IR) and thermogravimetric analysis (TGA). The self‐polymerization of dopamine could be completed within 3 days, and Fe₃O₄ nanoparticles were embedded into PDA polymer. TGA results showed that PDA content of nanocomposite can be up to 51.7 wt% and also showed a significant decrease in the decomposition temperature of PDA from 530 to 270°C in the presence of the Fe₃O₄ nanoparticles. Through TGA analysis the coating thickness was estimated to be about 0.86 nm that it is well coincident with the measured values using TEM images and XRD analysis. At room temperature by vibrating sample magnetometer (VSM), Fe₃O₄ and Fe₃O₄@PDA exhibit superparamagnetic behavior with a saturation moment of 57.87 and 44.7 emu/g, respectively. Furthermore, PZC value reduced for Fe₃O₄@PDA compared with Fe₃O₄ nanoparticles and fell from 6.7 to 3.04. J. VINYL ADDIT. TECHNOL., 25:41–47, 2019. © 2018 Society of Plastics Engineers     

Synthesis,characterization, and corrosion inhibition study of polyaniline‐α‐Fe2O3 nanocomposite

Polyaniline (PANI)‐α‐Fe₂O₃ nanocomposites (NCs) have been synthesized by chemical oxidative in situ polymerization of aniline in presence of α‐Fe₂O₃ nanoparticles at 5°C using (NH₄)₂S₂O₈ as an oxidant in an aqueous solution of sodium dodecylbenzene sulphonic acid (SDBS), as surfactant and dopant under N₂ atmosphere. The room temperature conductivity of NCs decreases and coercive force (H_c) increases with an increase addition of α‐Fe₂O₃ in PANI matrix. The result of FTIR and TGA shows that the interaction between α‐Fe₂O₃ particles and PANI matrix could improve the thermal stability of NCs. NCs demonstrate the superparamagnetic behavior. The performance of PANI and PANI‐α‐Fe₂O₃ NCs as protective coating, against corrosion of 316LN stainless steel in 3.5% NaCl was assessed by potentiodynamic polarization technique. The study shows a good corrosion inhibition effect of both the coatings. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of magnetic composite microspheres using a free radical polymerization system consisting of DPE

In this paper, a free radical polymerization system consisting of DPE was used to prepare magnetic composite microspheres. Fe₃O₄/P(AA-MMA-St) core-shell magnetic composite microspheres have been synthesized by copolymerization of acrylic acid, methyl methacrylate and styrene using DPE as radical control agent in the presence of Fe₃O₄ nanoparticles. The structure and properties of the magnetic composite microspheres were analyzed by FTIR, ¹H NMR, SEC-MALLS, TEM, TGA, VSM and other instruments, and the formation mechanism of composite microspheres was supposed by those results. It was found that the Fe₃O₄/P(AA-MMA-St) microspheres were nano-size with relatively homogeneous particle size distribution, perfect sphere-shaped morphologies, superparamagnetism with a saturation magnetization of 18.430 emu/g, and high magnetic content with a value of 40%. ¹H NMR and TEM analysis indicated that at the first stage of polymerization, a DPE-containing copolymer of acrylic acid, methyl methacrylate formed and was then absorbed on the surface of Fe₃O₄ nanoparticles. Contact angle analysis indicated that the DPE-containing copolymer improved hydrophobicity of Fe₃O₄ nanoparticles through chemical absorption. In the second step polymerization, certain amount of monomers of styrene and residue methacrylate were initiated by the DPE-containing copolymer on the Fe₃O₄ nanoparticles' surface and resulted in the formation of Fe₃O₄/P(AA-MMA-St) composite microspheres.     

The synthesis and characterization of monodispersed chitosan-coated Fe3O4 nanoparticles via a facile one-step solvothermal process for adsorption of bovine serum albumin

Preparation of magnetic nanoparticles coated with chitosan (CS-coated Fe₃O₄ NPs) in one step by the solvothermal method in the presence of different amounts of added chitosan is reported here. The magnetic property of the obtained magnetic composite nanoparticles was confirmed by X-ray diffraction (XRD) and magnetic measurements (VSM). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) allowed the identification of spherical nanoparticles with about 150 nm in average diameter. Characterization of the products by Fourier transform infrared spectroscopy (FTIR) demonstrated that CS-coated Fe₃O₄ NPs were obtained. Chitosan content in the obtained nanocomposites was estimated by thermogravimetric analysis (TGA). The adsorption properties of the CS-coated Fe₃O₄ NPs for bovine serum albumin (BSA) were investigated under different concentrations of BSA. Compared with naked Fe₃O₄ nanoparticles, the CS-coated Fe₃O₄ NPs showed a higher BSA adsorption capacity (96.5 mg/g) and a fast adsorption rate (45 min) in aqueous solutions. This work demonstrates that the prepared magnetic nanoparticles have promising applications in enzyme and protein immobilization.     

Synthesis and characterization of novel core‐shell magnetic nanogels based on 2‐acrylamido‐2‐methylpropane sulfonic acid in aqueous media

Ultrafine well‐dispersed Fe₃O₄ magnetic nanoparticles were directly prepared in aqueous solution using controlled coprecipitation method. The synthesis of Fe₃O₄/poly (2‐acrylamido‐2‐methylpropane sulfonic acid) (PAMPS), Fe₃O₄/poly (acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AM‐co‐AMPS) and Fe₃O₄/poly (acrylic acid‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AA‐co‐AMPS) ‐core/shell nanogels are reported. The nanogels were prepared via crosslinking copolymerization of 2‐acrylamido‐2‐methylpropane sulfonic acid, acrylamide and acrylic acid monomers in the presence of Fe₃O₄ nanoparticles, N,N′‐methylenebisacrylamide (MBA) as a crosslinker, N,N,N′,N′‐tetramethylethylenediamine (TEMED) and potassium peroxydisulfate (KPS) as redox initiator system. The results of FTIR and ¹H‐NMR spectra indicated that the compositions of the prepared nanogels are consistent with the designed structure. X‐ray powder diffraction (XRD) and transmission electron microscope (TEM) measurements were used to determine the size of both magnetite and stabilized polymer coated magnetite nanoparticles. The data showed that the mean particle size of synthesized magnetite (Fe₃O₄) nanoparticles was about 10 nm. The diameter of the stabilized polymer coated Fe₃O₄ nanogels ranged from 50 to 250 nm based on polymer type. TEM micrographs proved that nanogels possess the spherical morphology before and after swelling. These nanogels exhibited pH‐induced phase transition due to protonation of AMPS copolymer chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterization of conductive and magnetic PPy/Fe3O4/Ag nanocomposites

In this article, conductive and magnetic nanocomposites composed of polypyrrole (PPy), magnetite (Fe₃O₄) nanoparticles (NPs), silver (Ag) NPs, have been successfully synthesized with a two step process. First, the PPy/Fe₃O₄ was prepared by the ultrasonic in situ polymerization. Next, the PPy/Fe₃O₄/Ag was synthesized through the electrostatic adsorption. The products were characterized by fourier‐transform infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM), Thermogravimetric (TG), conductivity and magnetization analysis, and the results showed that the Ag NPs with the good conductivity coated uniformly on the surface of PPy/Fe₃O₄ and improved the conductivity of PPy/Fe₃O₄/Ag composites. In addition, as compared with PPy/Fe₃O₄, PPy/Fe₃O₄/Ag composites also have the excellent electro‐magnetic property and enhanced thermostability. POLYM. COMPOS., 35:450–455, 2014. © 2013 Society of Plastics Engineers     

Synthesis of ultrathin carbon dots-coated iron oxide nanocubes decorated with silver nanoparticles and their excellent catalytic properties

A facile ultrasonic method has been successfully developed for the fabrication of multifunctional Fe₃O₄@carbon dot/Ag (Fe₃O₄@C-dot/Ag) nanocubes (NCs), and the resulting materials are well characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), Vibrating sample magnetometer (VSM) and fluorescence measurements. The Ag nanoparticles (NPs) are uniform and well dispersed on the surface of Fe₃O₄@C-dot, while maintaining the shape and the size of the core-shell Fe₃O₄@C-dot NCs. In addition, its catalytic activities are evaluated by measuring the reduction of p-nitroaniline (p-NA) and crystal violet (CV), and the composite materials exhibit excellent catalytic activity towards reduction of p-NA and CV dye, which is superior to most reported catalysts. The good catalytic performance of Fe₃O₄@C-dot/Ag NCs may be attributed to the specific characteristics of its nanostructure and the synergistic effect on the delivery of electrons between Ag NPs and Fe₃O₄@C-dot NCs. Furthermore, the as-prepared catalysts also show good activity for the reduction of other nitrobenzene analogs. The effect of solvent and reducing agent was also studied on the catalytic activity of Fe₃O₄@C-dot/Ag NCs. Most importantly, the Fe₃O₄@C-dot/Ag catalyst shows excellent recycling stabilities, which can be potentially applied in the fields of catalysis and green chemistry.     

Magnetic Properties of FeMn<Subscript>y</Subscript>Co<Subscript>y</Subscript>Fe<Subscript>2−2y</Subscript>O<Subscript>4</Subscript>@Oleylamine Nanocomposite with Cation Distribution

In this study, oleylamine (OAm) capped FeMn_yCo_yFe_2?2yO₄ (0.0?≤?y?≤?0.4) nanocomposites (NCs) were prepared via the polyol route and the impact of bimetallic Co³⁺ and Mn³⁺ ions on the structural and magnetic properties of Fe₃O₄ was investigated. The complete characterization of FeMn_yCo_yFe_2?2yO₄@OAm NCs were done by different techniques such as XRD, SEM, TGA, FT-IR, TEM, and VSM. XRD analyses proved the successful formation of mono-phase MnFe₂O₄ spinel cubic products free from any impurity. The average crystallite sizes were calculated in the range of 9.4–26.4 nm using Sherrer’s formula. Both SEM and TEM results confirmed that products are nanoparticles like structures having spherical morphology with small agglomeration. Ms continued to decrease up to Co³⁺ and Mn³⁺ content of y?=?0.4. Although Mössbauer analysis reveals that the nanocomposites consist three magnetic sextets and superparamagnetic particles are also formed for Fe₃O₄, Co_0.2Mn_0.2Fe_2.6O₄ and Co_0.4Mn_0.4Fe_2.2O₄. Cation distributions calculation was reported that Co³⁺ ions prefer to replace Fe²⁺ ions on tetrahedral side up to all the concentration while Mn³⁺ ions prefer to replace Fe³⁺ ions on the octahedral.     

Functional acrylic acid as stabilizer for synthesis of smart hydrogel particles containing a magnetic Fe3O4 core

This paper reports a novel method to synthesize magnetic, stimuli-sensitive latex nanoparticles made with magnetite/poly(N-isopropylacrylamide-co-acrylic acid) (Fe₃O₄/P(NIPAAm-co-AAc)). To form a stabilized suspended core, iron oxide (Fe₃O₄) was functionalized with AAc such that further polymerization with NIPAAm and AAc monomers could occur. The P(NIPAAm-co-AAc) shell layer exhibited thermosensitive properties. The inclusion of Fe₃O₄ into the latex nanoparticles was confirmed using transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction spectroscopy, thermogravimetric analyzer (TGA), and superconducting quantum interference device magnetometer. The NIP–(AAc2.6–Fe) latex nanoparticles contained 2.25% Fe₃O₄ (by weight), as determined by TGA analysis. The particle diameters measured approximately 160–240 nm with a lower critical solution temperature of 35 °C. These novel magnetic stimuli-responsive latex nanoparticles have potential applications in numerous fields, such as catalyst supports, protein immobilization, cancer therapy, target drug delivery systems, and other biomedical applications.     

Synthesis and characterization of a novel thermally stable water dispersible polyurethane and its magnetic nanocomposites

In this work, a novel water dispersible polyurethane (WDPU) was synthesized from the reaction of hydroxyl-terminated polybutadiene (HTPB), 2,2 bis(hydroxymethyl) propionic acid (DMPA), and 1,5-naphthalene diisocyanate (NDI) and its magnetic nanocomposites were prepared by incorporation of modified Fe₃O₄ by 3-aminopropyltriethoxysilane (Fe₃O₄@APTS) nanoparticles (0.5, 1.5, and 3 wt%) via in situ polymerization method. Use of NDI as a high melting point diisocyanate by having the rigid naphthalene structure imparts physical strength as well as thermal stability to the resulted polyurethane. The synthesized WDPU based on NDI was characterized by using Fourier transform infrared spectroscopy (FTIR) technique. In addition, the morphology, mechanical, and magnetic features of the prepared polyurethane nanocomposites were investigated by X-ray diffraction (XRD), dynamic light scattering (DLS), transmission electron microscopy (TEM), atomic force microscopy (AFM), magnetic force microscopy (MFM), thermogravimetry analysis (TGA), dynamic mechanical thermal analysis (DMTA), and vibrating sample magnetometer (VSM) methods, respectively. Data from DLS experiment showed that the average particles size of the WDPU nanocomposites increased by increasing the nanoparticle contents in comparison with bare WDPU. AFM and MFM analyses indicated that the magnetic nanoparticles (MNPs) were well dispersed in the polyurethane matrices via the formation of covalent bonding between the functionalized magnetic nanoparticles and polymer chains. TGA results demonstrated that adding MNPs increased the temperature of the thermal degradation of the polyurethane nanocomposite. VSM analysis showed that the super paramagnetic behavior of the prepared nanocomposites depended on the Fe₃O₄@APTS nanoparticle content, as well.     

聚乙二醇/聚乙烯吡咯烷酮修饰的纳米Fe3O4粒子的制备与表征

为了获得能够在水中稳定分散,具有广泛应用前景的磁性纳米粒子,以不同分子量的聚乙烯吡咯烷酮(PVP)作为修饰剂,在聚乙二醇(PEG)中高温热分解乙酰丙酮铁(Fe(acac)₃)制备了纳米Fe₃O₄粒子。采用X射线粉末衍射仪(XRD)、透射电镜(TEM)、高分辨透射电镜(HRTEM)、超导量子干涉仪(SQUID)、热重分析仪(TGA)、傅里叶变换红外光谱仪(FT-IR)、纳米粒度与zeta电位分析仪对样品进行了表征,并对样品在生理盐水和生理缓冲液中的稳定性进行了研究,结果表明:制备的纳米Fe₃O₄粒子具有高的结晶度以及单分散性,在300 K下,具有超顺磁性和较高的饱和磁化强度;PEG和PVP共同修饰于纳米Fe₃O₄粒子表面,为纳米Fe₃O₄粒子提供了良好的水分散性;制备的纳米Fe₃O₄粒子在生理盐水和多种生理缓冲液中能够高度溶解并稳定地分散。水中的纳米Fe₃O₄粒子表面呈电中性,表面修饰层的空间位阻效应是所制备的纳米粒子在水溶液中高分散的原因。     

Fabrication,characterization, and properties of poly(ethylene‐co‐vinyl acetate)/magnetite nanocomposites

Poly(ethylene‐co‐vinyl acetate) (EVA)/magnetite (Fe₃O₄) nanocomposite was prepared with different loading of Fe₃O₄ nanoparticles. The mixing and compounding were carried out on a two‐roll mixing mill and the sheets were prepared in a compression‐molding machine. The effect of loading of nanoparticles in EVA was investigated thoroughly by different characterization technique such as transmission electron microscopy (TEM), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limiting oxygen index (LOI), and technological properties. TEM analysis showed the uniform dispersion of filler in the polymer matrix and the dispersion of filler decreased with increase in filler content. XRD of the nanocomposite revealed the more ordered structure of the polymer chain. An appreciable increase in glass transition temperature was observed owing to the restricted mobility of Fe₃O₄‐filled EVA nanocomposite. TGA and flame resistance studies indicated that the composites attain better thermal and flame resistance than EVA owing to the interaction of filler and polymer segments. Mechanical properties such as tensile strength, tear resistance, and modulus were increased for composites up to 7 phr of filler, which is presumably owing to aggregation of Fe₃O₄ nanoparticle at higher loading. The presence of Fe₃O₄ nanoparticles in the polymer matrix reduced the elongation at break and impact strength while improved hardness of the composite than unfilled EVA. The change in technological properties had been correlated with the variation of polymer–filler interaction estimated from the swelling behavior. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40116.     

Studies on Properties of Rice Straw/Polymer Nanocomposites Based on Polycaprolactone and Fe3O4 Nanoparticles and Evaluation of Antibacterial Activity

Modified rice straw/Fe₃O₄/polycaprolactone nanocomposites (ORS/Fe₃O₄/PCL-NCs) have been prepared for the first time using a solution casting method. The RS/Fe₃O₄-NCs were modified with octadecylamine (ODA) as an organic modifier. The prepared NCs were characterized by using X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The XRD results showed that as the intensity of the peaks decreased with the increase of ORS/Fe₃O₄-NCs content in comparison with PCL peaks, the Fe₃O₄-NPs peaks increased from 1.0 to 60.0 wt. %. The TEM and SEM results showed a good dispersion of ORS/Fe₃O₄-NCs in the PCL matrix and the spherical shape of the NPs. The TGA analysis indicated thermal stability of ORS/Fe₃O₄-NCs increased after incorporation with PCL but the thermal stability of ORS/Fe₃O₄/PCL-NCs decreased with the increase of ORS/Fe₃O₄-NCs content. Tensile strength was improved with the addition of 5.0 wt. % of ORS/Fe₃O₄-NCs. The antibacterial activities of the ORS/Fe₃O₄/PCL-NC films were examined against Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by diffusion method using nutrient agar. The results indicated that ORS/Fe₃O₄/PCL-NC films possessed a strong antibacterial activity with the increase in the percentage of ORS/Fe₃O₄-NCs in the PCL.     

Electro-Magnetic Polyfuran/Fe3O4 Nanocomposite: Synthesis,Characterization, Antioxidant Activity,and Its Application as a Biosensor

Herein, the authors report the synthesis of electro-magnetic polyfuran/Fe₃O₄ nanocomposites using Fe₃O₄ magnetic nanoparticles of different content as nucleation sites via in situ chemical oxidation polymerization method. Surface, structural, morphological, thermal, electrical and magnetic properties of the nanocomposites were studied by FT-IR, UV-visible spectroscopies, XRD, FESEM, TGA, four probe, and VSM, respectively. The effect of Fe₃O₄ nanoparticles content on the electrical conductivity and magnetization of nanocomposites was studied. The obtained polyfuran and polyfuran/Fe₃O₄ nanocomposites were analyzed for their antioxidant activity using 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. In addition, polyfuran/Fe₃O₄ nanocomposites have been investigated for application as electrochemical biosensor.     

Synthesis and characterization of polyimide‐γ‐Fe2O3 nanocomposites

Novel polyimide‐γ‐Fe₂O₃ hybrid nanocomposite films (PI/γ‐Fe₂O₃) has been developed from the poly(amic acid) salt of oxydianiline with different weight percentages (5, 10, 15 wt %) of γ‐Fe₂O₃ using tetrahydrofuran (THF) and N,N‐dimethylacetamide (DMAc) as aprotic solvents. The prepared polyimide‐γ‐Fe₂O₃ nanocomposite films were characterized for their structure, morphology, and thermal behavior employing Fourier transform infrared spectroscopy (FTIR), scanning electron micrograph (SEM), transmission electron micrograph (TEM), X‐ray diffraction (XRD), ¹³C‐NMR, and thermal analysis (TGA/DSC) techniques. These studies showed the homogenous dispersion of γ‐Fe₂O₃ in the polyimide matrix with an increase in the thermal stability of the composite films on γ‐Fe₂O₃ loadings. Magnetization measurements (magnetic hysteresis traces) have shown very high values of coercive force indicating their possible use in memory devices and in other related applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 834–840, 2007     

Synthesis and characterization of copolymer grafted magnetic nanoparticles via surface‐initiated nitroxide‐mediated radical polymerization

“Grafting from” surface‐initiated nitroxide‐mediated radical polymerization (SI‐NMRP) techniques were used to synthesize poly[styrene‐co‐(maleic anhydride)] copolymer brushes from the Fe₃O₄ surfaces. Well‐defined polymer chains were grown from the Fe₃O₄ surfaces to yield particles with a Fe₃O₄ core and a polymer outer layer. The observed narrow molecular weight distributions (M_w/M_n), linear kinetic plots and linear plots of molecular weight (M_n) versus conversion for the free polymer indicated that the chain growth from the Fe₃O₄ surface was a controlled process by adding an excess of 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO). The modified nanoparticles were subjected to detailed characterization using XRD, TEM, FT‐IR, and TGA. The analyses of vibration sample magnetometer (VSM) verified that the nanoparticles owned good magnetic property. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Magnetic and conducting Fe3O4–polypyrrole nanoparticles with core‐shell structure

Magnetic and conducting Fe₃O₄–polypyrrole nanoparticles with core‐shell structure were prepared in the presence of Fe₃O₄ magnetic fluid in aqueous solution containing sodium dodecylbenzenesulfonate (NaDS) as a surfactant and dopant. Both the conductivity and magnetization of the composites depend strongly on the Fe₃O₄ content and the doping degree. With increase of Fe₃O₄ content in the composite, the conductivity at room temperature decreases, but the saturated magnetization and coercive force increase. Transmission electron microscopy (TEM) images of Fe₃O₄ and Fe₃O₄–polypyrrole particles show almost spherical particles with diameters ranging from 20 to 30 and 30 to 40 nm, respectively. The thermal stability of Fe₃O₄–polypyrrole composites is higher than that of pure polypyrrole. Studies of IR, UV–visible and X‐ray photoelectron spectroscopy (XPS) spectra suggest that the increased thermal stability may be due to interactions between Fe₃O₄ particles and polypyrrole backbone. Copyright © 2003 Society of Chemical Industry     

Preparation and sedimentation behavior of conductive polymeric nanoparticles

A facile route to prepare Fe₃O₄/polypyrrole (PPY) core-shell magnetic nanoparticles was developed. Fe₃O₄ nanoparticles were first prepared by a chemical co-precipitation method, and then Fe₃O₄/PPY coreshell magnetic composite nanoparticles were prepared by in-situ polymerization of pyrrole in the presence of Fe₃O₄ nanoparticles. The obtained nanoparticles were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM) and laser particle size analyzer. The images indicate that the size of Fe₃O₄ particles is about 10 nanometers, and the particles are completely covered by PPY. The Fe₃O₄/PPY core-shell magnetic composite nanoparticles are about 100 nanometers and there are several Fe₃O₄ particles in one composite nanoparticle. The yield of the composite nanoparticles was about 50%. The sedimentation behavior of Fe₃O₄/PPY core-shell magnetic nanoparticles in electrolyte and soluble polymer solutions was characterized. The experimental results indicate that the sedimentation of particles can be controlled by adjusting electrolyte concentration, solvable polymers and by applying a foreign field. This result is useful in preparing gradient materials and improving the stability of suspensions.