Preparation,characterization, and metal ion retention capacity of Co(II) and Ni(II) from poly(p‐HO‐ and p‐Cl‐phenylmaleimide‐co‐2‐hydroxypropylmethacrylate) using the ultra filtration technique

p‐Chlorophenylmaleimide and p‐hydroxyphenylmaleimide with 2‐hydroxypropyl methacrylate were synthesized by radical polymerization, and the metal ion retention capacity and thermal behavior of the copolymers were evaluated. The copolymers were obtained by solution radical polymerization with a 0.50 : 0.50 feed monomer ratio. The maximum retention capacity (MRC) for the removal of two metal ions, Co(II) and Ni(II) in aqueous phase were determined using the liquid‐phase polymer based retention technique. Inorganic ion interactions with the hydrophilic polymer were determined as a function of pH. The metal ion retention capacity does not depend strongly on the pH. Metal ion retention increased with an increase of pH for a copolymer composition 0.50 : 0.50. At different pH, the MRC of the poly(p‐chlorophenylmaleimide‐co‐2‐hydroxypropylmethacrylate) for Co(II) and Ni(II) ions varied from 44.1 to 48.6 mg/g and from 41.5 mg/g to 46.0 mg/g, respectively; while the MRC of poly(p‐hydroxyphenylmaleimide‐co‐2‐hydroxypropyl methacrylate) for Co(II) and Ni(II) ions varied from 28.4 to 35.6 mg/g and from 27.2 to 30.8 mg/g, respectively. The copolymers and copolymer–metal complexes were characterized by elemental analysis, FT‐IR, ¹H NMR spectroscopy, and thermal behavior. The thermal behavior of the copolymer and polymer–metal complexes were studied using differential scanning calorimetry and thermogravimetry techniques under nitrogen atmosphere. The thermal decomposition temperature and T_g were influenced by the binding‐metal ion on the copolymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Competitive removal of heavy metal ions by cellulose graft copolymers

The effect of composition of graft chains of four types cellulose graft copolymers on the competitive removal of Pb²⁺, Cu²⁺, and Cd²⁺ ions from aqueous solution was investigated. The copolymers used were (1) cellulose‐g‐polyacrylic acid (cellulose‐g‐pAA) with grafting percentages of 7, 18, and 30%; (2) cellulose‐g‐p(AA–NMBA) prepared by grafting of AA onto cellulose in the presence of crosslinking agent of N,N′‐methylene bisacrylamide (NMBA); (3) cellulose‐g‐p(AA–AASO₃H) prepared by grafting of a monomer mixture of acrylic acid (AA) and 2‐acrylamido‐2‐methyl propane sulphonic acid (AASO₃H) containing 10% (in mole) AASO₃H; and (4) cellulose‐g‐pAASO₃H obtained by grafting of AASO₃H onto cellulose. The concentrations of ions which were kept constant at 4 mmol/L in an aqueous solution of pH 4.5 were equal. Metal ion removal capacities and removal percentages of the copolymers was determined. Metal ion removal capacity of cellulose‐g‐pAA did not change with the increase in grafting percentages of the copolymer and determined to be 0.27 mmol metal ion/g_copolymer. Although the metal removal rate of cellulose‐g‐p(AA–NMBA) copolymer was lower than that of cellulose‐g‐pAA, removal capacities of both copolymers were the same which was equal to 0.24 mmol metal ion/g_copolymer. Cellulose did not remove any ion under the same conditions. In addition, cellulose‐g‐pAASO₃H removed practically no ion from the aqueous solution (0.02 mmol metal ion/g_copolymer). The presence of AASO₃H in the graft chains of cellulose‐g‐p(AA–AASO₃H) created a synergistic effect with respect to metal removal and led to a slight increase in metal ion adsorption capability in comparison to that of cellulose‐g‐pAA. All types of cellulose copolymers were found to be selective for the removal of Pb²⁺ over Cu²⁺ and Cd²⁺. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2034–2039, 2003     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Removal of metal ions by water‐soluble polymacromonomers in conjunction with ultrafiltration membrane

The macromonomer polyethylene glycol methylether methacrylate was homo‐ and copolymerized with 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid under three feed monomer ratios. The initiator used was ammonium peroxydisulfate (0.2 mol %). All the polymers were completely soluble in water. The copolymer composition was determined by elemental analysis. The metal ion interaction capability of the three polymers was investigated through the liquid‐phase polymer‐based retention (LPR) technique at different values of pH and filtration factor Z. The highest metal ion retention ability was observed at pH 5.0. The homopolymer showed a high selectivity for Ni(II) ions at pH 3.0. The copolymers (PEGMEM)_1.51‐co‐(APSA)_1.00 and (PEGMEM)_1.00‐co‐(APSA)_1.95 showed a high selectivity for Cr(III) ions at pH 3.0. The maximum retention capacity, in general, was similar for the homo‐ and copolymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2955–2960, 2004     

Ultrafiltration of metal ions by water‐soluble chelating poly(N‐acryloyl‐N‐methylpiperazine‐co‐N‐acetyl‐α‐aminoacrylic acid)

Water‐soluble copolymers of N‐acryloyl‐N‐methylpiperazine and N‐acetyl‐α‐aminoacrylic acid were synthesized by radical polymerization. The copolymerization yield ranged between 60 and 97%. The FTIR and NMR spectra demonstrated that the copolymerization occurred. The copolymer composition was determined from ¹H‐NMR spectra by comparison of methyl groups from both moieties. The copolymers were richest in AAA units. The metal ion retention properties were investigated by the liquid‐phase polymer‐based retention (LPR) technique at different pH and filtration factors. The affinity for the metal ions depended on the copolymer composition, pH, and filtration factor. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2556–2561, 2002     

Synthesis and properties of hydrophilic polymers. IX. Synthesis,biodegradability, and metal complexation of copolymers of ethylenediaminetetraacetic acid dianhydride and lactose

The synthesis and characterization of poly(ethylenediaminetetraacetic acid‐co‐lactose) with pendant carboxylic groups of high molar mass (132 kg mol^?1) is described. The polycondensate was hydrolytically and microbiologically degradable with conventional microbiological methods. The metal‐complexing properties of the polyester were studied for Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Sr(II), Cd(II), Pb(II), and Al(III) ions in aqueous solution with the liquid‐phase polymer‐based retention (LPR) method. In addition, the complexing capacity of the Cu(II)‐saturated copolymer was determined by thermogravimetric analysis to be 182 mg g^?1 of polymer. According to the retention profiles determined as a function of the filtration factor with LPR in conjunction with inductively coupled plasma spectrometry, Cr(III) and Fe(III) showed a strong interaction with this polymer under these conditions, as indicated by retention values of about 100% at pH 5. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 650–657, 2003     

Synthesis and properties of hydrophilic polymers,part 11: Synthesis,biodegradability, and metal complexation of copolymers of ethylenediaminetetraacetic acid dianhydride and lactose

The synthesis and characterization of poly(ethylenediaminetetraacetic acid‐co‐lactose) of high molar mass (132 kg mol^?1) is described. The polycondensate with pendant carboxylic groups was shown to be hydrolytically and microbiologically degradable by using conventional microbiological methods. The metal complexing properties of the polyester were studied for Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Sr(II), Cd(II), Pb(II), and Al(III) ions in aqueous solution using the liquid‐phase polymer‐based retention (LPR) method. In addition, the complexing capacity of the Cu(II)‐saturated copolymer was determined by TGA to be 182 mg g^?1 polymer. According to the retention profiles determined as a function of filtration factor by using LPR in conjunction with inductively coupled plasma spectrometry, Cr(III) and Fe(III) showed a strong interaction with this polymer under these conditions, indicated by retention values of 100% at pH 5. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2932–2939, 2007     

Water‐soluble copolymers of 1‐vinyl‐2‐pyrrolidone and acrylamide derivatives: synthesis,characterization, and metal binding capability studied by liquid‐phase polymer‐based retention technique

Radical copolymerizations of 1‐vinyl‐2‐pyrrolidone with acrylamide and N,N′‐dimethylacrylamide at different feed ratios were investigated. The copolymers were characterized by Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR spectroscopy. The copolymer composition was determined from the ¹H NMR spectra and found to be statistical. The metal complexation of poly(acrylamide‐co‐1‐vinyl‐2‐pyrrolidone) and poly(N,N′‐dimethylacrylamide‐co‐1‐vinyl‐2‐pyrrolidone) for the metal ions Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Pb(II), Fe(III), and Cr(III) were investigated in an aqueous phase. The liquid‐phase polymer‐based retention method is based on the retention of inorganic ions by soluble polymers in a membrane filtration cell and subsequent separation of low‐molecular compounds from the polymer complex formed. The metal ion interaction with the hydrophilic polymers was determined as a function of the pH and the filtration factor. Poly(N,N‐dimethylacrylamide‐co‐1‐vinyl‐2‐pyrrolidone) showed a higher affinity for the metal ions than poly(acrylamide‐co‐1‐vinyl‐2‐pyrrolidone). According to the interaction pattern obtained, Cr(III) and Cu(II) formed the most stable complexes at pH 7. Pb(II) and Zn(II) were not retained. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 741–750, 1999     

Metal ion retention using the ultrafiltration technique: Preparation,characterization of the water-soluble poly(1-vinyl-2-pyrrolidone-co-itaconic acid) and its metal complexes in aqueous solutions

Radical copolymerization of 1-vinyl-2-pyrrolidone with itaconic acid at different feed monomer ratios (75–25 mol %) were investigated. The copolymers were characterized by elemental analysis, Fourier transform infrared (FTIR), ¹H and ¹³C NMR spectroscopy. The copolymer composition was determined from elemental analysis and found to be statistical copolymers. Additionally, viscosimetric measurements, molecular weight, and polydispersity have been determined. The metal complexation of poly(1-vinyl-2-pyrrolidone-co-itaconic acid) for the metal ions such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) were investigated at pH 3, 5, and 7 in aqueous solution. The metal ion interaction with hydrophilic polymers was determined as a function of the pH and filtration factor. Poly(1-vinyl-2-pyrrolidone-co-itaconic acid) showed a high affinity for the metal ions at pH 5 and 7. The poly(NVP-co-IA), with a copolymer composition of 29 : 71 mol % (PVA-3), presented the highest metal ion retention values, particularly at higher pHs, at which the carboxylic acid groups are nonprotonated and could easily coordinate with the metal ions. According to the interaction pattern obtained, Cr(II), Zn(II), Pb(II), and Ni(II) formed the most stable complexes at pH 7. The thermal behaviors of the copolymer and polymer metal complex were characterized using differential scanning calorimetry (DSC) and thermogravimetry techniques under nitrogen atmosphere. The copolymers present high thermal stability and do not present glass transition in DSC curves between 25 and 500°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

New polymeric structures designed for the removal of Cu(II) ions from aqueous solutions

New polymeric structures obtained by chemical transformations of maleic anhydride/dicyclopentadiene copolymer with triethylenetetraamine, p‐aminobenzoic acid, and p‐aminophenylacetic acid were used for the removal Cu(II) ions from aqueous solutions. The experimental values prove the importance of the chelator nature and of the macromolecular chain geometry for the retention efficiency. The retention efficiency (η_r), the retention capacity (Q _e ), and the distribution coefficient of the metal ion into the polymer matrix (K _d ) are realized by evaluation of residual Cu(II) ions in the effluent waters, by atomic adsorption. Also are discussed the influence of pH, the thermal stability of the polymer, and their polymer–metal complex, as well as the particular aspects regarding the contact procedure and the batch time. Based on the polymers and polymer–metal complexes characterization a potential retention mechanism is proposed. All polymer supports as well theirs metal–complexes are characterized by ATD and FTIR measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1397–1405, 2007     

Bioengineering functional copolymers: V. Synthesis,LCST, and thermal behavior of poly(N‐isopropyl acrylamide‐co‐p‐vinylphenylboronic acid)

New boron‐containing stimuli‐responsive (pH‐ and temperature‐sensitive) copolymers were synthesized and characterized. Structure and composition of copolymers were determined by FTIR and ¹H‐NMR spectroscopy, and elemental analysis and titration (N and B contents for NIPA and VPBA unit, respectively). By DSC and XRD measurements, it is established that the synthesized copolymers have a semicrystalline structure due to formation of intra‐ and/or intermolecular H‐bonded supramolecular architecture. The copolymer composition–structure–property relationship indicates semicrystalline structure of copolymers with different compositions, degrees of crystallinity, and thermal and stimuli‐responsive behaviors depends on the content of boron‐containing monomer linkage. Results of DSC, DTA, and TGA analyses indicated that copolymers have T_g and T_m and high thermal stability. These water‐soluble and temperature‐ and pH‐sensitive amphiphilic copolymers can be used as polymeric carries for delivery of biological entities for diverse biomedical use, including boron neutron capture therapy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 573–582, 2005     

Free radical copolymerization of functional water-soluble poly(N-maleoylglycine-co-crotonic acid): polymer metal ion retention capacity, electrochemical, and thermal behavior

In this study, the water-soluble polymers of N-maleoyl glycine (MG) with crotonic acid (CA) were copolymerized by free radical polymerization to obtain hydrophilic polymers, in order to study the effect of the functional groups in the copolymers on the metal ion retention capacity, electrochemical and thermal behavior, since that important requirements for their use in technological applications are: high solubility in water, chemical stability, a high affinity for one or more metal ions, and selectivity for the metal ion of interest. The metal complexation properties of poly(MG-co-CA) for the metal ions were investigated at pH 3, 5, and 7 in aqueous solution. The metal ion investigated were: Cu(II), Co(II), Cr(III), Ni(II), Cd(II), Zn(II), and Fe(III). The polymeric systems showed high metal ion retention for Zn (II) and Fe(III) at different pH. At different pHs, the MRC of the poly(MG-co-CA) for Fe(III) ions varied from 122.1 to 146.2 mg/g and from 120.5 to 133.5 mg/g, (samples 1 and 2 at pH 3 and 7, respectively). The MRC had the highest retention values for both copolymer systems at pH 7. The copolymers presented higher thermal decomposition temperature (TDT) in comparison with copolymer–metal complexes at pH 3 and 5. The cyclic voltammetry (CV) for poly(MG-co-CA) (20 mM) was compared with the CV of the [poly(MG-co-CA)–Fe(III)] copolymer complex. Moreover, [poly(MG-co-CA)–Fe(III)] showed a redox wave difference between +0.25 and +0.50 V possibly due to the presence of metal complexed with the polymer. The electrochemical characterization of the copolymer poly(MG-co-AC) shown the reduction of carboxylic acid groups of the N-maleoylglycine and crotonic acid moiety to hydroxyl group. The results support the assumption that the copolymer presents convenient electroactivity.     

Synthesis and properties of poly(imide siloxane) block copolymers with different block lengths

Several poly(imide siloxane) block copolymers with the same bis(γ‐aminopropyl)polydimethylsiloxane (APPS) content were prepared. The polyimide hard block was composed of 4,4′‐oxydianiline and 3,3′,4,4′‐diphenylthioether dianhydride (TDPA), and the polysiloxane soft block was composed of APPS and TDPA. The length of polysiloxane soft block increased simultaneously with increasing the length of polyimide hard block. For better understanding the structure–property relations, the corresponding randomly segmented poly(imide siloxane) copolymer was also prepared. These copolymers were characterized by FT‐IR, ¹H‐NMR, dynamic mechanical thermal analysis, thermogravimetric analysis, polarized optical microscope, rheology and tensile test. Two glass transition temperatures (T_g) were found in the randomly segmented copolymer, while three T_gs were found in the block copolymers. In addition, the T_gs, storage modulus, tensile modulus, solubility, elastic recovery, surface morphology and complex viscosity of the copolymers varied regularly with increasing the lengths of both blocks. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thermal analysis,glass transition temperature and rheological behaviour of emulsion copolymers of methyl methacrylate with styrene

Poly(MMA‐ran‐St) samples were synthesized under monomer‐starved conditions (drop feeding method) by emulsion copolymerization. Their thermostability was determined by thermogravimetric analysis. The glass transition temperature (T_g) of the copolymers was determined by differential scanning calorimetry (DSC) and torsional braid analysis (TBA). The results showed that the MMA–St copolymers exhibit an asymmetric T_g versus composition curve, which could not be interpreted by Johnston's equation, taking the different contributions of the diads to the T_g of the copolymer into consideration. A new sequence distribution equation taking into account the different contributions of the triads was proposed to predict the copolymer T_g. The new equation fitted the experimental data exactly. The T_g determined by torsional braid analysis (TBA) is higher than the one determined by DSC, but the difference is not constant. The rheological behaviour of the copolymers was also studied and T_gTBA‐T_gDSC increased with the increasing flow index of the copolymer. © 2003 Society of Chemical Industry     

Microstructure determination and thermal studies of n‐acryloylcarbazole/vinyl acetate copolymers

Copolymers of N‐acryloylcarbazole (A) and vinyl acetate (V) were synthesized by bulk polymerization using benzoyl peroxide (BPO) as free‐radical initiator at 65°C in different in‐feed ratios. The composition of the copolymer was determined by ¹H‐NMR spectrum. The comonomer reactivity ratios, determined by Kelen–Tudos (KT) and nonlinear error‐in‐variables (EVM) methods, were r_A= 16.75 ± 1.38, r_V = 0.015 ± 0.002, and r_A = 16.36, r_V = 0.015, respectively. Complete spectral assignments of the ¹H and ¹³C{¹H} NMR spectra of the copolymers were done by the help of distortionless enhancement by polarization transfer (DEPT) and two‐dimensional NMR techniques such as heteronuclear single quantum coherence (HSQC) and total correlation spectroscopy (TOCSY). The methine and methylene carbon resonances were found to be compositional as well as configurational sensitive. The signals obtained were broad pertaining to the restricted rotation of bulky carbazole group. The thermal stability and glass‐transition temperatures (T_g) of the copolymers were found to be dependant on polymer composition and characteristic of rotational rigidity of the polymer chain. Variation in the values of T_g with the copolymer composition was found to be in good agreement with theoretical values obtained from Johnston and Barton equations. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2720–2733, 2007     

Synthesis and characterization of hydrophilic copolymers of maleimide derivatives with 2‐hydroxyethyl methacrylate: electrochemical and thermal behavior

BACKGROUND: The high‐technology industries have been the driving force in the development of new synthetic polymers that combine thermal stability with specific functional properties. In this study p‐chlorophenylmaleimide, p‐hydroxyphenylmaleimide and p‐nitrophenylmaleimide (R‐PhMI) with 2‐hydroxyethyl methacrylate (HEMA) were synthesized by free radical polymerization to obtain hydrophilic polymers, in order to study the effect of the p‐chloroaryl, p‐hydroxyaryl or p‐nitroaryl group on the copolymer composition, electrochemical behavior and thermal properties. RESULTS: The thermal behavior was correlated with the copolymer composition and functional groups, maleimide derivatives, on the copolymers. Thermal decomposition temperature (TDT) and glass transition temperature (T_g) were influenced by the functional groups of R‐PhMI moiety on the copolymer. The polymers showed an electrochemically irreversible reduction process under the conditions tested. CONCLUSION: Poly[(p‐chloromaleimide)‐co‐(2‐hydroxyethyl methacrylate)] copolymer shows a higher TDT than poly[(p‐hydroxymaleimide)‐co‐(2‐hydroxyethyl methacrylate)] or poly[(p‐nitromaleimide)‐co‐(2‐hydroxyethyl methacrylate)] (NPHE). T_g decreases in going from nitro to hydroxyl to chloro groups. The NPHE copolymer shows a lower stability, losing weight at 200 °C. The NPHE copolymer shows a well‐defined reduction wave which is similar to those of the other copolymers and it also shows an additional quasi‐reversible reduction wave corresponding to the nitrobenzene group. Copyright © 2009 Society of Chemical Industry     

Microhardness of styrene/butadiene block copolymer systems: Influence of molecular architecture

The influence of molecular architecture on the mechanical properties of styrene/butadiene block copolymers was investigated by means of the microhardness technique. It was found that the microhardness of the styrene/butadiene block copolymers is dictated by the nature of microphase separated morphology. In contrast to polymer blends and random copolymers, in which the microhardness generally follows the additivity rule, the behavior of the investigated block copolymers was found to significantly deviate depending on their molecular architecture. The glass‐transition temperature of the polystyrene phase (T_g‐PS), which practically remained constant and that of the polybutadiene phase (T_g‐PB), which varied with the change in the block copolymer architecture, apparently do not influence the microhardness values of the block copolymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1670–1677, 2003     

Synthesis of 1-hexene/1,7-octadiene copolymers using coordination polymerization and postfunctionalization with triethoxysilane

Homo- and copolymerization of 1-hexene (H) and 1,7-octadiene (O) were done using two different catalysts 1,4-bis(2,6-diisopropylphenyl)acenaphthenediiminedibromo nickel (II) and rac-ethylenebis(indenyl)zirconium dichloride [rac-Et(Ind)₂ZrCl₂]. The metallocene catalyst showed higher activity than the nickel α-diimine catalyst in homo- and copolymerization. The ¹H NMR studies confirmed the formation of copolymers containing 8–47% of 1,7-octadiene. In the copolymerization of hexene and diene, as the amount of incorporated diene in the copolymers increased, their T _g increased. TGA results showed that thermal stability of the polymer increases with the increase of 1-hexene incorporation in the polymer chain. Finally 1-hexene/1,7-octadiene copolymers were functionalized by triethoxysilane in the presence of hexachloroplatinic acid. The ¹H NMR spectrum of the functionalized samples showed that the double bonds in the copolymer structure were completely eliminated. The DSC analysis showed higher T _gs for the functionalized copolymer. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48934.     

Synthesis and properties of ethylene‐substituted styrene copolymers

The copolymerization of ethylene and substituted styrenes [RSt's; p‐methylstyrene (MSt), p‐tert‐butylstyrene (BSt), 2‐vinylnaphthalene (VN), and p‐(tert‐butyldimethylsilyloxy)styrene (BMSiOSt)] were investigated with dimethylsilylene(tetramethylcyclopentadienyl)(N‐tert‐butyl)titanium dichloride to yield the corresponding ethylene–RSt copolymers. The substituent on the styrene (St) monomers did not affect the monomer reactivity ratio. The effect of the substituent structure of RSt on the thermal and mechanical properties was studied with differential scanning calorimetry, dynamic mechanical thermal spectroscopy, and elongation testing. The glass‐transition temperature (T_g) of the copolymers increased with increasing RSt content, and the order of T_g was as follows: BSt > VN > MSt = St. A copolymer with p‐hydroxystyrene (HOSt) was successively synthesized by means of deprotection of the copolymer with BMSiOSt. The copolymer showed a much higher T_g than the other copolymers because of the hydrogen connection of its OH groups. The mechanical properties of the copolymer in the glass state, at a lower temperature than T_g, were almost independent of the nature of the RSt. The substituent of the St monomers affected the pattern of the stress–strain curve in the elongation testing in the amorphous state. An improvement in the shape memory effect was observed in poly(ethylene‐co‐BSt). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008