Ultrasound‐assisted coating of nylon 6,6 with silver nanoparticles and its antibacterial activity

A silver/nylon 6,6 nanocomposite containing 1 wt % metallic silver has been produced from an aqueous solution of silver nitrate in the presence of ammonia and ethylene glycol by an ultrasound‐assisted reduction method. The structure and properties of nylon 6,6 coated with silver have been characterized with X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, energy‐dispersive X‐ray, X‐ray photoelectron spectroscopy, Raman spectroscopy, and diffused reflection spectroscopy measurements. The nanocrystals of pure silver, 50–100 nm in size, are finely dispersed on the polymer surface without damaging the nylon 6,6 structure. This silver–nylon nanocomposite is stable to many washing cycles and thus can be used as a master batch for the production of nylon yarn by melting and spinning processes. The fabric knitted from this yarn has shown excellent antimicrobial properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1423–1430, 2007     

Semiconductor‐assisted self‐cleaning polymeric fibers based on zinc oxide nanoparticles

Self‐cleaning polymeric fibers have been successfully prepared by depositing ZnO nanoparticle onto wool and polyacrylonitrile (PAN) fibers with good compatibility and significant photocatalytic self‐cleaning activity using the sol‐gel process at ambient temperature. scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, diffuse reflectance spectroscopy, X‐ray diffraction, Brunauer‐Emmett‐Teller surface area analysis, and thermogravimetric analysis have been adopted as the characterization techniques. Transmission electron microscopy studies revealed presence of zinc oxide nanoparticles with 10–15 nm in size. Brunauer‐Emmett‐Teller measurement showed surface area of 48 m²/g for the ZnO nanoparticles. Photocatalytic activity of the self‐cleaning materials were tested by measuring the photo‐assisted degradation of methylene blue (MB) and eosin yellowish (EY) under ultraviolet‐visible illumination. The results indicate that both of the ZnO‐coated polyacrylonitrile and ZnO‐coated wool fibers acquire photocatalytic activity toward dyes degradation. The photocatalytic activity of the treated fibers is maintained upon several numbers of photodegradation cycles. This facile and cheap preparation technique can be also applied to new polymeric fabrics to produce self‐cleaning materials for industrial application. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Plasma‐enhanced deposition of silver nanoparticles onto polymer and metal surfaces for the generation of antimicrobial characteristics

Silver nanoparticle thin layers were deposited onto formaldehyde‐radio frequency (RF)‐plasma‐functionalized medical‐ and food‐grade silicone rubber, stainless steel, and paper surfaces. The silver deposition was carried out under ex situ plasma conditions using the Tollen's reaction. Results from survey and high‐resolution electron spectroscopy for chemical analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy dispersive X‐ray spectroscopy investigations confirmed the presence of thin silver layers on the plasma‐exposed and subsequently modified substrate surfaces. In addition, SEM and AFM demonstrated the nanoparticle‐based morphology of the deposited layers. Our results showed that thin macromolecular layers bearing aldehyde functionalities can be deposited onto silicone rubber, stainless steel, and paper surfaces. The bactericidal properties of the silver‐coated surfaces were demonstrated by exposing them to Listeria monocytogenes. No viable bacteria were detected after 12 to 18 h on silver‐coated silicone rubber surfaces. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1411–1422, 2004     

The comparative study of photocatalytic self‐cleaning properties of synthesized nanoscale titania and zirconia onto polyacrylonitrile fibers

The photocatalytic activity of TiO₂ and ZrO₂‐coated polyacrylonitrile (PAN) fibers was compared through the self‐cleaning of methylene blue and eosin yellowish. TiO₂ and ZrO₂ nanocrystals were successfully synthesized and deposited onto PAN fibers with photocatalytic self‐cleaning activity using the sol‐gel process at low temperature. The pristine and treated samples have been characterized by several techniques, such as scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, diffuse reflectance spectroscopy, X‐ray diffraction, and thermogravimetric analysis. The TiO₂ nanoparticles with 10–20 nm in size, and ZrO₂ with 20–40 nm have been synthesized to form dispersed particles on the fiber surface, which shows photocatalytic properties when exposed to UV–Vis light. The photocatalytic activity, tested by measuring the degradation of adsorbed methylene blue and Eosin Y. Photocatalytic activity of TiO₂‐coated fibers toward dyes degradation was higher than that of ZrO₂‐coated fibers. This preparation technique can be also applied to new fabrics to create self‐cleaning and UV irradiation protection properties in them. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and properties of magnetic polystyrene microspheres

Magnetic polystyrene nanospheres were efficiently prepared by using a new indirect process based on miniemulsion polymerization of styrene. The samples were characterized by X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), and vibrating‐sample magnetometry (VSM), respectively. The experimental results clearly show that the 3‐methacryloxypropyltrimethoxy silane was anchored onto the surface of the magnetic particles to form the vinyl end. The size of the magnetic particle is about 6–30 nm. The size of the magnetic particle capped with polystyrene is about 1–2 μm. The magnetic polystyrene spheres exhibit multidomain character, whereas the pure magnetic particles show single domain character. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3660–3666, 2007     

Layer‐by‐layer modification of porous polybenzoxazine with silver nanoparticles for enhanced CO2 storage

Polybenzoxazine (PBZ) xerogels have been synthesized via quasi solventless method and coated with silver nanoparticles using the layer‐by‐layer (LbL) deposition method. After coating, the samples were carbonized at 800 °C to obtain high surface area porous carbon materials to be used for CO₂ storage. Evidences of the successful LbL deposition of the coating was provided by ultraviolet–visible and attenuated total reflection–Fourier transform infrared spectroscopy and the silver nanoparticles top layer was confirmed by scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Results showed that the samples coated with silver nanoparticles displayed an increased CO₂ capacity from 3.02 to 3.39 mmol g^?1 when compared with the plain carbon PBZ. The LbL method for the modification of the pore surface in porous PBZ is simple and allows the facile tuning of the inner PBZ pore's surface chemistry with metallic nanoparticles that could be enhanced CO₂ storage capacity. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45097.     

Controllable preparation and heavy‐metal‐ion adsorption of lignosulfonate‐polypyrrole composite nanosorbent

Lignosulfonate‐polypyrrole (LS‐PPY) composite nanospheres were prepared facilely via an in situ polymerization of pyrrole monomers in the presence of lignosulfonate as a dispersant and ammonium persulfate as an oxidant. The LS‐PPY composite was characterized with Fourier Transform infrared spectroscopy (FTIR), thermogravimetric analysis, wide‐angle X‐ray diffraction (XRD), scanning electron microscopy (SEM), field‐emission SEM, and transmission electron microscopy. Uniform LS‐PPY solid composite nanospheres with an average diameter of 154 nm were obtained. The LS‐PPY composite nanospheres were applied to adsorption of Ag(I) and Pb(II) ions from aqueous solutions. Maximum adsorption capacities of Ag(I) and Pb(II) were up to 759.3 mg g⁻¹ and 207.5 mg g⁻¹, respectively. Furthermore, the silver ions can be reduced to metallic silver nanowires through a redox reaction between the LS‐PPY composite nanospheres and the silver ions. A productive no‐template route to fabrication of LS‐PPY composite nanospheres with controllable size and heavy‐metal‐ion adsorption ability was achieved. POLYM. COMPOS., 36:1546–1556, 2015. © 2014 Society of Plastics Engineers     

Mn‐Loaded Mesoporous Silica Nanocomposite: A Highly Efficient Humidity Sensor

We report a relative humidity sensor based on manganese‐nanoparticle‐loaded mesoporous silica SBA‐15 using a facile hydrothermal route. The as‐developed nanocomposite material (Mn/SBA‐15) possesses a high surface area and a high pore volume. The obtained samples were characterized by using low‐angle X‐ray Diffraction (XRD), Fourier‐transform infrared spectroscopy (FTIR), N₂ adsorption–desorption, high‐resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and energy‐dispersive X‐ray (EDX) spectroscopy techniques. The Mn/SBA‐15 exhibited, improved humidity response and recovery time as compared to pure SBA‐15 in the 11%–92% RH range. Optimal results were obtained for the 5 wt% Mn‐loaded SBA‐15 sample, which displayed excellent linearity, low hysteresis, and high humidity response. A change in ~5 orders of magnitude in resistance was observed over 11%–92% RH range. The investigation of humidity sensing properties of Mn/SBA‐15 nanocomposite shows that this material has good prospects as humidity sensor.     

Antibacterial polycaprolactone electrospun fiber mats prepared by soluble eggshell membrane protein–assisted adsorption of silver nanoparticles

Antibacterial polycaprolactone (PCL) electrospun fiber mats were prepared by coelectrospinning PCL with soluble eggshell membrane protein (SEP) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP), followed by adsorption of silver nanoparticles (Ag NPs) through hydrogen‐bonding interaction between the amide groups of SEP and the carboxylic acid groups capped on the surfaces of Ag NPs. The PCL/SEP fiber mat was characterized by X‐ray photoelectron spectroscopy, indicating the presence of some SEP on the fiber surface. The adsorption of Ag NPs was confirmed by transmission electron microscopy and quantitatively characterized by thermogravimetric analysis. The pH value of the silver sol used for adsorption is very important in view of the amount and dispersion state of Ag NPs adsorbed on the fibers. The Ag NP–decorated PCL/SEP fiber mats prepared at pH 3–5 exhibit strong antibacterial activity against both gram‐negative Escherichia coli and gram‐positive Bacillus subtilis. Antibacterial PCL fiber mats were also obtained similarly with the assistance of collagen (another protein) instead of SEP, showing that protein‐assisted adsorption of Ag NPs is a versatile method to prepare antibacterial electrospun fiber mats. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43850.     

Photoactive behavior of polyacrylonitrile fibers based on silver and zirconium co‐doped titania nanocomposites: Synthesis,characterization, and comparative study of solid‐phase photocatalytic self‐cleaning

Silver and zirconium co‐doped and mono‐doped titania nanocomposites were synthesized and deposited onto polyacrylonitrile fibers via sol–gel dip‐coating method. The resulted coated‐fibers were characterized by X‐ray diffraction (XRD), scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, diffuse reflectance spectroscopy, thermogravimetric analysis, and BET surface area measurement. Photocatalytic activity of the TiO₂‐coated and TiO₂‐doped coated fibers were determined by photomineralization of methylene blue and Eosin Y under UV–vis light. The progress of photodegradation of dyes was monitored by diffuse reflectance spectroscopy. The XRD results of samples indicate that the TiO₂, Ag‐TiO₂, Zr‐TiO₂, and Ag‐Zr‐TiO₂ consist of anatase phase. All samples demonstrated photo‐assisted self‐cleaning properties when exposed to UV–vis irradiation. Evaluated by decomposing dyes, photocatalytic activity of Ag–Zr co‐doped TiO₂ coated fiber was obviously higher than that of pure TiO₂ and mono‐doped TiO₂. Our results showed that the synergistic action between the silver and zirconium species in the Ag‐Zr TiO₂ nanocomposite is due to both the structural and electronic properties of the photoactive anatase phase. These results clearly indicate that modification of semiconductor photocatalyst by co‐doping process is an effective method for increasing the photocatalytic activity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A facile synthesis of a novel three‐phase nanocomposite: Single‐wall carbon nanotube/silver nanohybrid fibers embedded in sulfonated polyaniline

A three‐phase water‐soluble nanocomposite of single wall carbon nanotube/silver nanoparticle hybrid fibers embedded in sulfonated polyaniline has been synthesized by a simple chemical solution mixing process. The nanocomposite has been characterized by high resolution electron microscopy, X‐ray diffractometry, FTIR spectroscopy, Raman spectroscopy, and thermogravimetric analysis. Optical and electrical characteristics of the nanocomposite have been determined by UV–vis absorption spectroscopy, photoluminescence spectroscopy, and four‐probe electrical conductivity measurement. A surface plasmon absorption band obtained around 460 nm indicates the presence of silver nanoparticles in the composite. The optical band gap calculation for sulfonated polyaniline vis‐a‐vis the nanocomposite supported the conductivity measurement. Over 1300 times increase in DC electrical conductivity has been observed for the three‐phase nanocomposite, with a filler loading of 20 wt %, at 306 K. This observation could be explained by Mott's variable range hopping model considering a three‐dimensional conduction. Such a nanocomposite has immense potential for use as a cathode material in lithium‐ion batteries and supercapacitors. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41692.     

One‐Step Sonochemical Synthesis of Reduced Graphene Oxide/Pt/Sn Hybrid Materials and Their Electrochemical Properties

Low frequency ultrasound (20 kHz) was used for the reduction of graphene oxide (GO), Pt and Sn precursors with simultaneous loading of Pt and Sn monometallic and Pt–Sn bimetallic nanoparticles on the surface of reduced GO (rGO). The physicochemical characterizations of the catalysts were carried out using transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), energy dispersive X‐ray spectroscopy (EDX), and selected area electron diffraction (SAED) techniques. The reduced monometallic and bimetallic nanoparticles were spherical in shape with diameters around 2–6 nm, uniformly embedded on rGO sheets of few layers thickness. The electrocatalytic activities of the synthesized materials were evaluated by cyclic voltammetric studies.     

A convenient approach to synthesize stable silver nanoparticles and silver/polystyrene nanocomposite particles

In this study, silver nanoparticles were prepared by the reduction of silver nitrate in SDS+ isopentanol/styrene/H₂O reverse microemulsion system using sodium citrate as reducing agent. The Ag/PS nanocomposite particles were prepared by in situ emulsion polymerization of the styrene system containing silver nanoparticles that did not separate from the reaction solution. The polymerization dynamic characteristic was studied, at the same time, silver nanparticles and the encapsulation of composite particles were characterized by Fourier‐transform‐infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X‐ray diffraction (XRD) measurement, UV–vis diffuse reflectance spectroscopy, and X‐ray photoelectron spectroscopy (XPS). The results of TEM and UV–vis absorption spectra showed that well‐dispersed silver nanoparticles have a narrow size distribution. XRD showed that Ag and Ag/PS nanocomposite particles were less than 10 and 20 nm in size, which is similar to those observed by TEM. The results of XPS spectra revealed that the microemulsion system can stabilize the silver nanoparticles from aggregation and provided supporting evidence for the polystyrene encapsulated silver nanoparticle structure. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008.     

Characterization of nanoscale wool particles

Nanoscale wool particles were prepared from wool fibers by a special pretreatment with the aid of specially designed machinery and techniques. Scanning electron micrographs showed that the particle sizes of wool powders produced from wool fibers approximately 8–20 μm in diameter decreased from a microscale to a nanoscale after three stages of pulverization, which were further confirmed with a laser particle size analyzer. Fourier transmission infrared analysis showed that there were no substantial changes in the chemical structure of the wool after the pulverization processes. The wool powders after the second and third pulverizations slightly differed from that of the wool fiber and the particles after the first pulverization, with greater amounts of the secondary amine groups, amide groups, C?S stretching vibrations, and O? H bonds. X‐ray diffraction analysis showed that the crystallinity of the wool powders decreased when the particle sizes decreased, particularly at nanoscales. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 803–808, 2007     

Au‐nanoparticle‐decorated SnO2 nanorod sensor with enhanced xylene‐sensing performance

In this work, pure and Au‐nanoparticle‐decorated SnO₂ nanorods were prepared via a one‐step hydrothermal method combined with a facile deposition process, and then characterized by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, high‐resolution transmission electron microscopy, and X‐ray photoelectron spectroscopy. The xylene‐sensing performance of the nanorods was also investigated. The results show that Au nanoparticles with an average diameter of 4‐6 nm were immobilized on the surface of rutile SnO₂ nanorods. As the amount of Au increased, the surface‐adsorbed oxygen species gradually increased. The 12 mol% Au‐SnO₂ nanorods exhibited the highest response to 50 ppm xylene, a lower operating temperature (279 to 255°C), favorable selectivity, and fast response‐recovery speed (3 and 4 seconds, respectively). These properties made the fabricated nanorods good candidates for xylene detection. The possible mechanism for the enhanced xylene‐sensing performance is discussed.     

In situ fabrication of polyaniline‐silver nanocomposites using soft template of sodium alginate

Polyaniline (PANI)‐Ag nanocomposites were synthesized by in situ chemical polymerization approach using ammonium persulfate and silver nitrate as oxidant. Characterizations of nanocomposites were done by ultraviolet–visible ( UV–vis), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy (TEM). UV–vis, XRD and FTIR analysis established the formation of PANI/Ag nanocomposites and face‐centered‐cubic phase of silver. PANInanofibers were of average diameter ～ 30 nm and several micrometers in length. Morphological analysis showed that the spherical‐shaped silver nanoparticles decorate the surface of PANI nanofibers. Silver nanoparticles of average diameter ～ 5–10 nm were observed on the TEM images for the PANI‐Ag nanocomposites. Such type of PANI‐Ag nanocomposites can be used as bistable switches as well as memory devices. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of CdS and CdS/polyacrylonitrile nanocomposites by γ‐irradiation and emulsion polymerization

CdS and CdS/polyacrylonitrile (PAN) nanocomposites were prepared by γ‐irradiation and emulsion polymerization. The CdS and CdS/PAN nanocomposites were characterized by powder X‐ray diffraction, infrared spectroscopy, Fourier transform Raman spectroscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, and thermal analysis (thermogravimetric analysis/dynamic thermal analysis). In photoluminescence spectroscopy analysis, the maximum peak of CdS/PAN nanocomposites prepared by γ‐irradiation and emulsion polymerization was at about 485 nm, whereas the maximum peak of CdS nanocomposites was at about 460 nm. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2335–2342, 2004     

Composite electrodes consisting of platinum particles and polyaniline nanowires as electrocatalysts for methanol oxidation

Polyaniline (PANI) with nanowire (PANI‐(NW)) network structure (mean diameter 10–20 nm) was successfully deposited on a stainless steel (SS) electrode by a galvanostatic process. Platinum particles were deposited into the PANI nanowire network structure to result the PANI(NW)‐Pt composite electrode. The PANI(NW)‐Pt electrode was used as electrocatalysts for the electrochemical oxidation of methanol. The PANI nanowires and PANI(NW)‐Pt nanocomposite were characterized by scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), and UV–vis absorption spectroscopy. Nanowire morphology with an average diameter of 10–20 nm could be seen from scanning electron micrograph. Small amount (70 mμm) of spherical Pt particles could be deposited into the PANI(NW). Catalytic activity for the oxidation of methanol was studied by using cyclic voltammetry (CV). For comparative purposes, bulk Pt (deposited Pt on SS) and PANI nanowires based electrodes were tested. The PANI(NW)‐Pt nanocomposite electrode exhibited excellent catalytic activity for the electrooxidation of methanol in comparison to bulk Pt electrodes, which reveals that the PANI(NW)‐Pt nanocomposite electrodeis more promising for application in electrocatalyst as a support material. POLYM. COMPOS., 28:650–656, 2007. © 2007 Society of Plastics Engineers     

Structural and antibacterial properties of a γ‐radiation‐assisted,in situ prepared silver–polycarbonate matrix

A silver–polycarbonate (Ag–PC) matrix was prepared by a γ‐radiation‐assisted diffusion method, and its antibacterial properties were studied. Rutherford backscattering spectroscopy, X‐ray diffraction, and transmission electron microscopy results showed the diffusion of good, crystalline‐structured (face‐centered cubic) silver nanoparticles (AgNPs) inside polycarbonate (PC) after irradiation. Ultraviolet–visible spectroscopic results indicated a blueshift in the surface plasmon resonance of the AgNPs; this revealed a particle size decrease with increasing γ‐radiation dose. This was also supported by the scanning electron microscopy results. The microstructure of the pristine PC and silver‐doped PC was monitored with positron annihilation spectroscopy, and it showed decreases in the free‐volume hole size and fractional free‐volume for Ag–PC and γ‐ray‐irradiated PC. This corroborated the Doppler broadening spectroscopy results. The thermal degradation temperature of PC was increased because of the diffusion of AgNPs in PC. The antibacterial activity of the synthesized Ag–PC matrix was evaluated by the zone of inhibition, and the results demonstrated its bacterial growth inhibition ability. The results indicate the potential to produce an Ag–PC matrix for various applications in medical and food industries. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43729.     

Preparation of modified sodium lignosulfonate hydrogel–silver nanocomposites

In this article, modified sodium lignosulfonate (MSLS) hydrogel particles were prepared using sodium lignosulfonate as starting material. The hydrogel particles exhibit a reversible property transformed between the two states of macrohydrogel and microhydrogel by ultrasonic dispersion and vacuum drying. Using this property, highly stable and uniformly dispersed silver nanoparticles (AgNPs) have been prepared via in situ reduction of silver ions (silver nitrate) in the microhydrogel aqueous dispersion with sodium borhydride. The hybrid microhydrogel with AgNPs was transformed into MSLS hydrogel–silver nanocomposites by drying under vacuum at 40°C. X‐ray diffraction, ultraviolet–visible (UV–vis) spectrophotometry, Fourier transform infrared spectra, atomic absorption spectroscopy, transmission electron microscopy, and scanning electron microscopy were used to characterize the composite system. The results show that the size of spherical silver nanoparticles incorporated in the hydrogel framework is about 10 nm. POLYM. COMPOS., 34:860–866, 2013. © 2013 Society of Plastics Engineers