Effect of filler‐to‐matrix blending ratio on the mechanical strength of palm‐based biocomposite boards

The effect of the blending ratio of a polyurethane matrix and oil‐palm empty fruit bunch (EFB) fibers on the mechanical properties of biocomposite boards has been studied. The PU matrix and EFB fibers were used at blending ratios of 25:75, 30:70 and 35:65 (by weight). The mechanical property of hardness was studied. The intention of this study was to produce fiberboard from a vegetable oil‐based polyester as the matrix and biomass from the palm oil industry, namely EFB. It was found that the blending ratio with a lower filler loading (35:65) gave higher impact and flexural strengths due to better fiber encapsulation which enhanced the fiber–matrix interfacial adhesion. Copyright © 2005 Society of Chemical Industry     

Effect of coir fiber loading on mechanical and morphological properties of oil palm fibers reinforced polypropylene composites

Hybrid composites were fabricated by compounding process with varying the relative weight fraction of oil palm empty fruit bunch (EFB) and coir fibers to assess the effect of hybridization of oil palm EFB with coir fibers in polypropylene (PP) matrix. The mechanical and morphological properties of oil palm/coir hybrid composites were carried out. Tensile and flexural properties of oil EFB‐PP composites enhanced with hybridization of coir fibers except coir/oil palm EFB (25:75) hybrid composite, whereas highest impact properties at oil palm:coir fibers with 50:50 ratios. Results shown that hybrid composites with oil palm:coir fibers with 50:50 ratios display optimum mechanical properties. In this study, scanning electron microscopy (SEM) had been used to study morphology of tensile fractured surface of hybrid composites. Its clear from SEM micrograph that coir/EFB (50:50) hybrid composites display better tensile properties due to strong fiber/matrix bonding as compared with other formulations which lead to even and effective distribution of stress among fibers. The combination of oil palm EFB/coir fibers with PP matrix produced hybrid biocomposites material can be used to produce components such as rear mirrors' holder and window levers, fan blades, mallet, or gavel. POLYM. COMPOS., 35:1418–1425, 2014. © 2013 Society of Plastics Engineers     

Polyurethane composites based on oil palm empty fruit bunches: Effect of isocyanate/hydroxyl ratio and chemical modification of empty fruit bunches with toluene diisocyanate and hexamethylene diisocyanate on mechanical properties

This study focuses on the effect of isocyanate (NCO)/hydroxyl (OH) group ratios and chemical modification of oil palm empty fruit bunches (EFBs) with toluene diisocyanate (TDI) and hexamethylene diisocyanate (HMDI) on the mechanical properties of EFB–polyurethane (PU) composites. The tensile, flexural, and impact properties are affected by the NCO/OH ratios. The tensile strengths, flexural strengths, and toughness increase as the NCO/OH increases; however, the modulus decreases. The reduction in the modulus is attributable to the increased flexibility of the PU linkages. Chemical modification of the EFBs increases the tensile strength, flexural strength, and toughness; however, the modulus is lowered as the percentage of treated EFB is increased. Impact strength results show that the strength increases as the NCO/OH ratio is increased. At NCO/OH ratios of 1.0 and 1.1, the composites with HMDI‐treated fibers exhibit higher impact strength than those with TDI‐treated and untreated fibers, respectively. This may be due to the longer and more flexible chain length of HMDI as compared to TDI, which enables the composites to absorb more energy before failure. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effect of fibers treatment on dynamic mechanical and thermal properties of epoxy hybrid composites

Epoxy hybrid composites fabricated by reinforcing 2‐hydroxy ethyl acrylate (2‐HEA) treated oil palm empty fruit bunch (EFB) and jute fibers. It assume that chemical modification of jute and oil palm EFB fibers increased fiber/matrix interfacial bonding and it results in enhanced thermal properties of hybrid composites. Dynamic mechanical and thermal analysis of treated hybrid composites was carried out. Results indicated that chemical modification of oil palm EFB and jute fibers affect the dynamic mechanical and thermal properties of hybrid composites. The storage modulus values of hybrid composites increases with chemical treatment and loss modulus increased with fiber treatment in hybrid composites. Damping factor peak values of treated hybrid composites shifted toward the lower temperature compared to both untreated hybrid composites. Cole–Cole analysis was made to understand the phase behaviour of the hybrid composites. Thermogravimetric analysis indicated an increased in thermal stability of hybrid composite with the incorporation of chemically modified fibers. POLYM. COMPOS., 36:1669–1674, 2015. © 2014 Society of Plastics Engineers     

ACETYLATED PLANT-FIBER-REINFORCED POLYESTER COMPOSITES: A STUDY OF MECHANICAL,HYGROTHERMAL, AND AGING CHARACTERISTICS

The potential of acetylation of plant fibers to improve the properties of composites was studied. The chemical modification of oil palm empty fruit bunch (EFB), coconut fiber (Coir), oil palm frond (OPF), jute, and flax using noncatalyzed acetic anhydride were investigated. Proof of acetylation was indicated by the increase in weight percent gain (WPG). Acetylation at a reaction temperature of 120°C had resulted in the reduction in the tensile properties (stress, modulus, and elongation at break) of EFB and Coir composites. However, at 100°C, the acetylated samples exhibited improved properties. The mechanical properties of acetylated EFB- and Coir-fiber-reinforced polyester composites was evaluated at different fiber loadings. The tensile strength and modulus were improved, but elongation at break was slightly reduced upon acetylation, particularly at high fiber loading. Impact properties were moderately increased for those composites with fiber loadings up to 45%. Acetylation exhibited a low moisture absorption, comparable with glass-fiber composites. Acetylated EFB and Coir composites showed superior retention of tensile and impact properties after aging in water up to 12 months.     

The effect of glycidyl methacrylate treatment of empty fruit bunch (EFB) on the properties of ultra‐violet radiation cured EFB‐unsaturated polyester composite

In this study, biofiber composites cured by ultra‐violet, were produced using pulp made from empty fruit bunch (EFB) as the reinforcing agent and unsaturated polyester as the matrix. The conversion of EFB fibers into pulp was carried out using organosolv pulping process. The EFB pulp was then chemically treated with glycidyl methacrylate (GMA) to different percentage of weight percent gain and the composites were made with different percentages of pulp loading. Results showed that the Kappa number of EFB decreased as the NaOH concentration in organosolv pulping increased. Composites which were made from GMA‐treated EFB showed better mechanical properties (tensile, flexural, and impact strength) than those of the unmodified. Fourier transform infrared spectroscopy showed peaks that proved the occurrence of grafting between GMA and OH from EFB pulp. Scanning electron microscope analysis showed the evidence of the enhancement of the compatibility between EFB and matrix. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effects of fiber‐surface treatment on the properties of hybrid composites prepared from oil palm empty fruit bunch fibers,glass fibers,and recycled polypropylene

In this article, we report the effects of hybridization and fiber‐surface modification on the properties of hybrid composites prepared from recycled polypropylene (RPP), coupling agents, oil palm empty fruit bunch (EFB), and glass fibers through a twin‐screw extruder and an injection‐molding machine. The surface of the EFB fibers was modified with different concentrations (10–15 wt %) and temperatures (60–90°C) of alkali solutions. The structure and morphology of the fibers were observed with the help of Fourier transform infrared spectroscopy and scanning electron microscopy. Different types of composites were fabricated with untreated, alkali‐treated, and heat‐alkali‐treated fibers. Comparative analysis of the mechanical, structural, morphological, and thermal properties of the composites was carried out to reveal the effects of treatment and hybridization. The analysis results reveal that composites prepared from the alkali‐treated (in the presence of heat) fibers show improved mechanical, thermal, and morphological properties with a remarkably reduced water absorption. Additionally, the crystallinity of RPP also increased with the development of biaxial crystals. The improvement of various properties in relation to the structures and morphologies of the composites is discussed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43049.     

Agro‐wastes: Mechanical and physical properties of resin impregnated oil palm trunk core lumber

Agro‐wastes, oil palm trunk core or sap was utilized for the production of new palm‐wood material using phenol formaldehyde resin as a matrix. The kiln‐dried (moisture content 10%) oil palm trunk was impregnated with phenol formaldehyde resin using a high power vacuum pump. The oil palm trunk core lumber (OPTCL) was loaded with different percentages of phenol formaldehyde (PF) resin. The mechanical properties (tensile, flexural, and impact) and physical properties (water absorption and density) were studied and compared with rubberwood. Testing of mechanical and physical properties was done according to the ASTM standard. The morphology of the resin loaded OPTCL was analyzed by using Scanning Electron Microscopy (SEM). In general, the result showed that impregnated OPTCL exhibited good mechanical and physical properties when compared with untreated oil palm trunk core (OPTCL with 0% resin content) and rubberwood. Tensile and flexural strength of OPTCL increased with the increase in the resin content up to 15% and showed a decreasing trend with the increase in the loading percentage beyond 15%.The impact strength also increased with the increase in the resin content from 5% to 15%. However, impregnated OPTCL with 15% resin loading showed lower water absorption uptake as compared with the other composite materials and rubberwood. SEM micrograph confirmed that the resin was impregnated efficiently within the pores of OPTCL fibers. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

The effects of NCO/OH ratio on propylene oxide‐modified oil palm empty fruit bunch‐based polyurethane composites

In this study, the effects of NCO/OH ratio on polyurethane composites prepared from propylene oxide‐modified oil palm empty fruit bunch (EFB‐PO) properties were studied. From the results obtained, the diffusion of solvents in the composites produced was classified as Fickian type. The molecular weight between crosslink points and degree of crosslinking were affected as the NCO/OH was increased. This phenomenon was attributed to the interaction between excess NCO and accessible OH groups from EFB‐PO to form a three‐dimensional network. From the mechanical testing results, it was found that the NCO/OH ratio had a significant effect on tensile and flexural test. However, no significant influence was observed on impact strength of the composites produced. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mechanical,thermal, and morphological properties of maleic anhydride‐g‐polypropylene compatibilized and chemically modified banana‐fiber‐reinforced polypropylene composites

Composites were prepared with chemically modified banana fibers in polypropylene (PP). The effects of 40‐mm fiber loading and resin modification on the physical, mechanical, thermal, and morphological properties of the composites were evaluated with scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Infrared (IR) spectroscopy, and so on. Maleic anhydride grafted polypropylene (MA‐g‐PP) compatibilizer was used to improve the fiber‐matrix adhesion. SEM studies carried out on fractured specimens indicated poor dispersion in the unmodified fiber composites and improved adhesion and uniform dispersion in the treated composites. A fiber loading of 15 vol % in the treated composites was optimum, with maximum mechanical properties and thermal stability evident. The composite with 5% MA‐g‐PP concentration at a 15% fiber volume showed an 80% increase in impact strength, a 48% increase in flexural strength, a 125% increase in flexural modulus, a 33% increase in tensile strength, and an 82% increase in tensile modulus, whereas the heat deflection temperature increased by 18°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of short Grewia optiva fiber‐based polymer composites

Natural fibers, such as Flax, Sisal, Hibiscus Sabdariffa, and Grewia optiva (GO) possess good reinforcing capability when properly compounded with polymers. These fibers are relatively inexpensive, easily available from renewable resources, and possess favorable values of specific strength and specific modulus. The mechanical performance of natural fiber‐reinforced polymers (FRPs) is often limited owing to a weak fiber‐ matrix interface. In contrast, urea–formaldehyde (UF) resins are well known to have a strong adhesion to most cellulose‐containing materials. This article deals with the synthesis of short G. optiva fiber‐reinforced UF polymer matrix‐based composites. G. optiva fiber‐reinforced UF composites processed by compression molding have been studied by evaluating their mechanical, physical, and chemical properties. This work reveals that mechanical properties such as: tensile strength, compressive strength, flexural strength, and wear resistance of the UF matrix increase up to 30% fiber loading and then decreases for higher loading when fibers are incorporated into the polymer matrix. Morphological and thermal studies of the matrix, fiber, and short FRP composites have also been carried out. The swelling, moisture absorbance, chemical resistance, and water uptake behavior of these composites have also been carried out at different intervals. The results obtained lay emphasis on the utilization of these fibers, as potential reinforcing materials in bio‐based polymer composites. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Preparation and properties of castor oil‐based polyurethane/α‐zirconium phosphate composite films

Novel castor oil‐based polyurethane/α‐zirconium phosphate (PU/α‐ZrP) composite films with different α‐ZrP loading (0–1.6 wt %) and different NCO/OH molar ratios were synthesized by a solution casting method. The characteristic properties of the PU/α‐ZrP composite films were examined by Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and tensile testing. The results from Fourier transform infrared spectroscopy indicated that strong intermolecular hydrogen bonding formed between α‐ZrP and PU, XRD and SEM results revealed that the α‐ZrP particles were uniformly distributed in the PU matrix at low loading, and obvious aggregation existed at high loading. Because of hydrogen bonding interactions, the maximum values of tensile strength were obtained with 0.6 wt % α‐ZrP loading and 1.5 of NCO/OH molar ratio in the matrix. Evidence proved that the induced α‐ZrP used as a new filler material can affect considerably the mechanical and thermal properties of the composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

POLYSTYRENE-BENZOYLATED EFB REINFORCED COMPOSITES

Reinforced thermoplastics generally are produced by incorporation of reinforcement agents or fillers into thermoplastic resins. The utilization of lignocellulosic material as filler with reinforcement in polymer matrix has received much interest due to its lower price and other properties. A composite of polystyrene reinforced with oil palm empty fruit bunches (EFB) and chemically treated EFB with benzoyl chloride (EFB-benzoylated) as a function of loading and fiber surface modification were prepared. The chemically treated fibers were analyzed with FT-IR to observe the extent of chemical reaction with EFB fiber. The sharp peak at 710 cm^?1 appeared on the spectra, which indicated that the mono-substituted benzene ring has taken place. The strong peak at 1720 cm^?1 has indicated the presence of ester group treated fiber. The flexural test was performed using Instron 4301 testing machine to study flexural properties of the composites with various fiber sizes. The results showed that the flexural properties increased with particle size. The flexural strength of EFB-benzoylated composites was observed to be stronger than untreated EFB fiber. Scanning electron microscope was used to investigate the morphological structure of the fiber surface, fiber pull out, fracture surface, and fiber–matrix interface. The untreated EFB composites showed hole and fiber end, which indicated that most of the fiber have pulled out breaking during the fracture of composites; however, the treated EFB-benzoylated showed a good adhesion between fiber and matrix.     

Effects of palm ash loading and maleated natural rubber as a coupling agent on the properties of palm‐ash‐filled natural rubber composites

Natural rubber composites were prepared by the incorporation of palm ash at different loadings into a natural rubber matrix with a laboratory‐size two‐roll mill (160 × 320 mm²) maintained at 70 ± 5°C in accordance with the method described by ASTM D 3184–89. A coupling agent, maleated natural rubber (MANR), was used to improve the mechanical properties of the natural rubber composites. The results indicated that the scorch time and cure time decreased with increasing filler loading, whereas the maximum torque exhibited an increasing trend. Increasing the palm ash loading increased the tensile modulus, but the tensile strength, fatigue life, and elongation at break decreased. The rubber–filler interactions of the composites decreased with increasing filler loading. Scanning electron microscopy of the tensile fracture surfaces of the composites and rubber–filler interaction studies showed that the presence of MANR enhanced the interfacial interaction of the palm ash filler and natural rubber matrix. The presence of MANR also enhanced the tensile properties and fatigue life of palm‐ash‐filled natural rubber composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of poly(dimethyl siloxane) on the water absorption and natural degradation of poly(lactic acid)/oil‐palm empty‐fruit‐bunch fiber biocomposites

Composites were fabricated with poly(lactic acid) and oil‐palm empty‐fruit‐bunch (EFB) fibers with extrusion; this was followed by an injection‐molding technique. Before compounding, the surface of the fiber was modified through ultrasound and poly(dimethyl siloxane) (PDMS). The influences of the ultrasound and PDMS on the water absorption and biodegradability of the composites were investigated. Additionally, the composites were buried under soil for 6 months, and their biodegradability was assessed through different characterization techniques, such as tensile testing and weight loss and diffussability measurement. The changes on the surface of the fibers due to treatment were examined by scanning electron microscopy analysis, and the influences on the biodegradability of the composites were observed. Functional group analysis and possible changes before and after degradation were also examined by a Fourier transform infrared spectrophotometric technique. The results analyses revealed that the treatment of fibers improved the density of the fibers and reduced the water uptake of the composites. The overall weight loss due to soil burial testing was found to be maximum for the untreated‐fiber‐based composites (6.8%), whereas the ultrasound‐ and silane‐treated composites showed the minimum value of weight loss (3.7%). The deterioration of the tensile strength due to degradation was found to be at a maximum for the untreated‐fiber‐based composite (27%), whereas the ultrasound‐ and silane‐treated‐fiber‐based composites showed a minimum value of 8%. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42784.     

Effect of Fiber Esterification on Fundamental Properties of Oil Palm Empty Fruit Bunch Fiber/Poly(butylene adipate-co-terephthalate) Biocomposites

A new class of biocomposites based on oil palm empty fruit bunch fiber and poly(butylene adipate-co-terephthalate) (PBAT), which is a biodegradable aliphatic aromatic co-polyester, were prepared using melt blending technique. The composites were prepared at various fiber contents of 10, 20, 30, 40 and 50 wt% and characterized. Chemical treatment of oil palm empty fruit bunch (EFB) fiber was successfully done by grafting succinic anhydride (SAH) onto the EFB fiber surface, and the modified fibers were obtained in two levels of grafting (low and high weight percentage gain, WPG) after 5 and 6 h of grafting. The FTIR characterization showed evidence of successful fiber esterification. The results showed that 40 wt% of fiber loading improved the tensile properties of the biocomposite. The effects of EFB fiber chemical treatments and various organic initiators content on mechanical and thermal properties and water absorption of PBAT/EFB 60/40 wt% biocomposites were also examined. The SAH-g-EFB fiber at low WPG in presence of 1 wt% of dicumyl peroxide (DCP) initiator was found to significantly enhance the tensile and flexural properties as well as water resistance of biocomposite (up to 24%) compared with those of untreated fiber reinforced composites. The thermal behavior of the composites was evaluated from thermogravimetric analysis (TGA)/differential thermogravimetric (DTG) thermograms. It was observed that, the chemical treatment has marginally improved the biocomposites' thermal stability in presence of 1 wt% of dicumyl peroxide at the low WPG level of grafting. The improved fiber-matrix surface enhancement in the chemically treated biocomposite was confirmed by SEM analysis of the tensile fractured specimens.     

Photo‐fabricated unsaturated polyester resin composites reinforced by kenaf fibers,synthesis and characterization

New bio‐fiber composites (UPRC) cured by ultraviolet radiation were produced using kenaf fiber as reinforcing agent and unsaturated polyester resins as matrix in the presence of styrene and IRGACURE 1800 as photoinitiator. Unsaturated polyester resins based on palm oil were prepared from various ratios of monoglyceride (MG)/maleic anhydride (MA) by the interaction of the corresponding MG monomer, with different equivalents of MA, in the presence of 2‐methylimidazole as catalyst. The various characteristics of the obtained bio‐fiber composites, including mechanical, gel content, water absorption and thickness swelling test, thermal analysis, were determined and the data were discussed. Bio‐fiber composite with MG: MA ratio (1 : 4 eq./eq.) showed better mechanical properties (tensile, flexural, and impact strength) than other formulations. Gel content increased as the amount of MA was increased up to the MG: MA ratio was 1 : 4 (eq./eq.) then slightly decreased at the higher ratio formulation. Bio‐fiber composite (UPRC_c) was considered the best prepared bio‐fiber composite which contained higher degree double bond, cross‐linking and thermal stability. Moreover, morphological study of selected examples of the formed bio‐fiber composites was also carried out and showed the evidence of the enhancement of the compatibility between fiber and polymer matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Novel eco‐friendly biodegradable coir‐polyester amide biocomposites: Fabrication and properties evaluation

Biocomposites are prepared from a cheap, renewable natural fiber, coir (coconut fiber) as reinforcement with a biodegradable polyester amide (BAK 1095) matrix. In order to have better fiber‐matrix interaction the fibers are surface modified through alkali treatment, cyanoethylation, bleaching and vinyl grafting. The effects of different fiber surface treatments and fiber amounts on the performance of resulting bio‐composites are investigated. Among all modifications, cyanoethylated coir‐BAK composites show better tensile strength (35.50 MPa) whereas 7% methyl methacrylate grafted coir‐BAK composites show significant improvement in flexural strength (87.36 MPa). The remarkable achievement of the present investigation is that a low strength coir fiber, through optimal surface modifications, on reinforcement with BAK show an encouraging level of mechanical properties. Moreover, the elongation at break of BAK polymer is considerably reduced by the incorporation of coir fibers from nearly 400% (percent elongation of pure BAK) to 16‐24% (coir‐BAK biocomposites). SEM investigations show that surface modifications improve the fiber‐matrix adhesion. From biodegradation studies we find that after 52 days of soil burial, alkali treated and bleached coir‐BAK composites show significant weight loss. More than 70% decrease in flexural strength is observed for alkali treated coir‐BAK composites after 35 days of soil burial. The loss of weight and the decrease of flexural strength of degraded composites are more or less directly related.     

Mechanical characterization and modeling of poly (β‐hydroxybutyrate)‐co‐poly(β‐hydroxyvalerate)–Alfa fiber‐reinforced composites

The mechanical properties of biobased composites of poly(β‐hydroxybutyrate)‐co‐poly(β‐hydroxyvalerate) biopolymer continuously reinforced with unidirectional Alfa fibers are investigated via tensile testing of oriented composite laminates. Simple mechanical models for the elastic stiffness, strength, and nonlinear hardening of the biobased composites are proposed with an emphasis on techniques that only require the independent properties of the fiber and matrix to facilitate composite design. Rule of mixtures (ROM) approaches are found to effectively predict the elastic properties of the composites but generally overestimate strength. Modified ROM approaches that discount the contribution of the matrix in the fiber loading direction and the contribution of the fiber in the transverse loading direction provide the most accurate strength predictions. Apparent elastic properties for composites with varying fiber orientations are predicted using a modified orthotropic laminate plate method which was found to overestimate composite stiffness in off‐axis loading directions. Postyield nonlinear hardening is modeled using a calibrated continuum yield and plasticity model and demonstrated to provide a close match of the experimental results. POLYM. COMPOS., 35:1758–1766, 2014. © 2014 Society of Plastics Engineers     

Preparation,characterization, and mechanical properties of poly(ε‐caprolactone)/polylactic acid blend composites

Mechanical properties of poly(ε‐caprolactone) (PCL) and polylactic acid (PLA) blend reinforced with Dura and Tenera palm press fibers were studied. Dicumyl peroxide (DCP) was used as compatibilizer in the blend composites. Fourier transforms infrared spectrophotometer (FTIR) and field emission scanning electron microscope (FESEM) was used to study the effect of treatment on the fibers and fiber/matrix adhesion respectively. The uncompatibilized blend composites exhibited higher Young's modulus than the compatibilized blend composites. Impact strength of compatibilized blend composites of Tenera fibers (FM) increased by 161% at 10 wt% fiber load more than the uncompatibilized blend composites at same fiber load. The Dura fibers (FN) enhanced impact strength by 133% at 10 wt% fiber load. Tensile strength increased by 40% for compatibilized FM blend composites. In conclusion, it was observed that DCP incorporation resulted in good interfacial adhesion as revealed by the FESEM micrographs and evidenced in the improved mechanical properties. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers