Synthesis of oxazolidines as latent curing agents for single‐component polyurethane adhesive and its properties study

Four oxazolidine compounds OX₁–OX₄ were prepared. Their structures were characterized using Fourier transform infrared spectra, ¹H‐NMR, ¹³C‐NMR, and ESI‐MS. The hydrolysis kinetics research of oxazolidines suggested that the hydrolysis of oxazolidine followed the first‐order reaction. The gap of the ground energies between the open‐ and closed‐ring was calculated using Gaussian software, which indicated that the stability of the open‐ring system of OX₁ was the best. Then, the obtained oxazolidines were applied to single‐component polyurethane (SPU) and filler CaCO₃ was added to investigate the effect of the two above on the properties of SPU. The results show that the pore size and the number of bubbles produced in the SPU decreased with the increase of the rate of hydrolysis of the added oxazolidine, and the bondability of the polyurethane was better. With the increase of CaCO₃ content, the polyurethane surface became smoother and the bond strength was stronger. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45722.     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

Synthesis,cationic polymerization and curing reaction with epoxy resin of 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane

A new spiro ortho carbonate, 3,9‐di(p‐methoxybenzyl)‐1,5,7,11‐tetra‐oxaspiro(5,5)undecane was prepared by the reaction of 2‐methoxybenzyl‐1,3‐propanediol with di(n‐butyl)tin oxide, following with carbon disulfide. Its cationic polymerization was carried out in dichloromethane using BF₃‐OEt₂ as catalyst. The [¹H], [¹³C]NMR and IR data as well as elementary analysis of the polymers obtained indicated that it underwent double ring‐opening polymerization. The polymerization mechanism is discussed. The curing reaction of bisphenol A type epoxy resin in the presence of the monomer and a curing agent was investigated. DSC measurements were used to follow the curing process. In the case of boron trifluoride‐o‐phenylenediamine (BF₃‐OPDA) as curing agent, two peaks were found on the DSC curves, one of which was attributed to the polymerization of the epoxy group, and the other to the copolymerization of the monomer with the isolated epoxy groups or homopolymerization. However, when BF₃‐H₂NEt was used as curing agent, only one peak was present. IR measurement of the modified epoxy resin with various weight ratios of epoxy resin/monomer was performed in the presence of BF₃‐H₂NEt as curing agent. The results demonstrate that the conversion of epoxy group increases as the content of monomer increases. The curing process and the structure of the epoxy resin network are discussed. © 2000 Society of Chemical Industry     

3-羟乙基-1,3-噁唑烷的合成和表征及其初步应用

以甲醛和二乙醇胺为原料,采用加成缩合反应合成了化合物3-羟乙基-1,3-噁唑烷。毛细管气相色谱(GC)研究表明可通过减压蒸馏提纯产物。采用傅里叶变换红外光谱(FT-IR)、13C核磁共振谱(13CNMR)对产物的结构进行了表征。将所合成的3-羟乙基-1,3-噁唑烷用作单组分湿固化聚氨酯体系的潜固化剂,抑泡效果明显,固化后样品的伸长率提高了10倍以上。     

Yeast‐mediated enantioselective synthesis of chiral R‐(+)‐ and S‐(−)‐1‐phenyl‐1‐butanol from prochiral phenyl n‐propyl ketone in hexane–water biphasic culture

BACKGROUND: The hydrophobic phenyl n‐propyl ketone was used as a model compound to examine alcohol dehydrogenase activity in Saccharomyces cerevisiae mediated cell culture. Parameters such as pH, hexane‐to‐water volume percentage, and the amount of cofactor Zn²⁺ ion for either cell growth or reduction were studied to see their effect on the enantioselectivity toward the product R‐(+)‐ or S‐(?)‐1‐phenyl‐1‐butanol. RESULTS: The pH for cell growth in aqueous culture was 7.0, while the pH for reduction in the aqueous portion of the biphasic culture was 5.0. Without Zn²⁺ ion the biphasic cultures of middle to high hexane‐to‐water volume percentage exhibited an R‐(+)‐1‐phenyl‐1‐butanol enantiomeric excess of 53.7% to > 99%. Without Zn²⁺ ion the biphasic cultures at low hexane‐to‐water volume percentage possessed an S‐(?)‐1‐phenyl‐1‐butanol enantiomeric excess of 14.5–46.5%. Exclusively, the enantioselectivity for biphasic cultures containing Zn²⁺ ion was an S‐(?)‐1‐phenyl‐1‐butanol enantiomeric excess of 27.5% to > 99%. Reduction mediated in aqueous culture with varied amount of Zn²⁺ ion by the yeast Candida utilis also showed an S‐(?)‐1‐phenyl‐1‐butanol enantiomeric excess of 79.2–95.4%. CONCLUSION: The enantioselectivity of S. cerevisiae mediated biphasic culture reduction of phenyl n‐propyl ketone can be manipulated through the cofactor Zn²⁺ ion and the hexane volume percentage of the biphasic culture. Copyright © 2008 Society of Chemical Industry     

A Convenient Procedure for the Synthesis of Acetals from α‐Halo Ketones

A study for determining the scope and limitations of a procedure for synthesising ethylene acetals from haloketones is presented. The method uses 1,2‐bis(trimethylsilyloxy)ethane, BTSE, as reagent and Nafion^®‐TMS as catalyst. Two procedures have been tested: (A) stoichiometric amounts of the haloketone and BTSE and a catalytic amount of Nafion^®‐TMS were heated to reflux in chloroform solution, and (B) stoichiometric amounts of the reactants and a catalytic amount of Nafion^®‐TMS were heated to 90–100 °C in the absence of solvent. The following ketones have been tested: 2‐bromo‐1‐phenyl‐1‐ethanone, 2‐bromo‐cyclopentenone, 3‐bromo‐3‐methyl‐2‐butanone, 3‐chloro‐3‐methyl‐2‐butanone, 1‐bromo‐3,3‐dimethyl‐2‐butanone, 1‐chloro‐3,3‐dimethyl‐2‐butanone, 2‐bromocyclohexanone, 2‐chloro‐1‐cyclohexyl‐1‐ethanone, 1,1‐dibromo‐3,3‐dimethyl‐2‐butanone, 1,3‐dibromo‐3‐methyl‐2‐butanone, 1,3‐dibromo‐2‐butanone, 1,3‐dibromo‐2‐propanone, 2‐chloro‐1‐phenyl‐1‐ethanone, and endo‐2‐bromocamphor. Yields were in the range 57–100% with the exceptions of endo‐2‐bromocamphor which afforded <10% yield and the dibromoketones 1,1‐dibromo‐3,3‐dimethyl‐2‐butanone and 1,3‐dibromo‐3‐methyl‐2‐butanone for which the method failed. Factors determining the scope and limitations are briefly discussed. Full experimental details and spectroscopic data of the acetals are given.     

Monomer conversion in a light‐cured dental resin containing 1‐phenyl‐1,2‐ propanedione photosensitizer

The efficiency of 1‐phenyl‐1,2‐propanedione (PPD) photosensitizer for the photopolymerization of a dental resin based on 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloxyprop‐1‐oxy)phenyl]propane/triethylene glycol dimethacrylate was assessed. Experimental formulations containing PPD or/and camphorquinone (CQ) in combination with dimethylaminoethyl methacrylate (DMAEMA), ethyl‐4‐dimethylaminobenzoate (EDMAB), 4‐(N,N‐dimethylamino)phenethyl alcohol (DMPOH) and N,N‐3,5‐tetramethylaniline (TMA) at different concentrations were studied. The photopolymerization was carried out by means of a commercial light‐emitting diode (LED) curing unit. Near‐infrared spectroscopy was used to follow the consumption of double bonds versus irradiation time. No significant differences in the conversion values among formulations prepared with PPD in combination with DMAEMA, DMPOH and TMA were found. In contrast, the conversion was markedly increased by the presence of EDMAB. At low concentrations of photosensitizer, when used in combination with DMAEMA and EDMAB, PPD resulted in a final conversion equivalent to CQ. However, when DMPOH and TMA were used, PPD was found to be less efficient than CQ. In addition, at high photoinitiator concentration, the effectiveness of PPD was less than that of CQ independently of the co‐initiator used. The replacement of some CQ by an equivalent amount of PPD resulted in similar final monomer conversion as formulations having the same amount of CQ alone. The LED light source employed emitted in the wavelength range 410–490 nm with a peak around 470 nm, whereas the maximum molar absorbance of PPD was in the UV region. However, the small overlap of the spectral distribution of the LED curing lamp and the PPD absorption spectrum was compensated by the large extinction coefficient of PPD. Copyright © 2007 Society of Chemical Industry     

Polyamides obtained by direct polycondesation of 4‐[4‐[9‐[4‐(4‐aminophenoxy)‐3‐methyl‐phenyl] fluoren‐9‐YL]‐2‐methyl‐phenoxy]aniline with dicarboxylic acids based on a diphenyl‐silane moiety

Polyamides (PAs) containing fluorene, oxyether, and diphenyl‐silane moieties in the repeating unit were synthesized in > 85% yield by direct polycondesation between a diamine and four dicarboxylic acids. Alternatively, one PA was synthesized from an acid dichloride. The diamine 4‐[4‐[9‐[4‐(4‐aminophenoxy)‐3‐methyl‐phenyl]fluoren‐9‐yl]‐2‐methyl‐phenoxy]aniline ( 3 ) was obtained from the corresponding dinitro compound, which was synthesized by nucleophilic aromatic halogen displacement from p‐chloronitrobenzene and 9,9‐bis (4‐hydroxy‐3‐methyl‐phenyl)fluorene ( 1 ). Monomers and polymers were characterized by FTIR and ¹H, ¹³C, and ²⁹Si‐NMR spectroscopy and the results were in agreement with the proposed structures. PAs showed inherent viscosity values between 0.14 and 0.43 dL/g, indicative of low molecular weight species, probably of oligomeric nature. The glass transition temperature (T_g) values were observed in the 188–211°C range by DSC analysis. Thermal decomposition temperature (TDT_10%) values were above 400°C due to the presence of the aromatic rings in the diamine. All PAs showed good transparency in the visible region (>88% at 400 nm) due to the incorporation of the fluorene moiety. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of novel phosphorous‐containing biphenol, 2‐(5, 5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐1,4‐benzenediol and its application as flame‐retardant in epoxy resin

A novel phosphorous‐containing biphenol, 2‐(5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐ 1,4‐benzenediol (DPODB), was prepared by the addition reaction between 5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorinane phosphonate (DPODP) and p‐benzoquinone (BQ). The compound (DPODB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) for electronic application. The structure of DPODB was confirmed by FTIR and NMR spectra. Thermal properties of cured epoxy resin were studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was tested by UL‐94 vertical test and achieved UL‐94 vertical tests of V‐0 grade (nonflammable). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3842–3847, 2006     

Synthesis,characterization, and curing of {2,6–bis‐[2‐(bis‐oxiranylmethyl‐amino)‐methylbenzyl]‐phenyl}‐bis‐oxiranylmethylamine (BPBOMA)

The curing behavior of epoxy resin prepared by reacting epichlorohydrin with amine functional aniline acetaldehyde condensate (AFAAC) was investigated using AFAAC as a curing agent. The epoxy resin, {2,6‐bis‐[2‐(bis‐oxiranylmethyl‐amino)‐methylbenzyl]‐phenyl}‐bis‐oxiranylmethylamine (BPBOMA), was characterized by FTIR and ¹H‐NMR spectroscopy, viscosity measurement, and determination of epoxy content. Analysis of the curing reaction was followed by differential scanning calorimetry (DSC) analysis. To investigate the curing kinetic with AFAAC, dynamic DSC scans were made at heating rates of 5, 10, 15, and 20°C/min. The activation energy and frequency factor of the AFAAC formulation were evaluated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3168–3174, 2006     

Synthesis and characterization of a novel siloxane‐imide‐containing polybenzoxazine

A novel siloxane‐imide‐containing polybenzoxazine based on N,N′‐bis(N‐phenyl‐3,4‐dihydro‐2H‐benzo[1,3]oxazine)‐5, 5′‐bis(1,1′,3,3′‐tetramethyldisiloxane‐1,3‐diyl)‐bis(norborane‐2,3‐dicarboximide) (BZ‐A1) was successfully synthesized. The thermal properties of BZ‐A1 are superior to those of conventional polybenzoxazines lacking siloxane groups. Polymerized BZ‐A1 possesses extremely low surface free energy (γ_s = 15.1 mJ m^?2) after curing at 230 °C for 1 h. Moreover, the surface free energy of polymerized BZ‐A1 is more stable than conventional bisphenol A‐type polybenzoxazine during thermal curing and annealing processes, indicating that polymerized BZ‐A1 is more suitable for applications requiring low surface free energy materials for high temperatures over long periods of time. Copyright © 2010 Society of Chemical Industry     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Synthesis of polyoxazolidines and their application in moisture-curable polyurethane

A series of polyoxazolidines based on monofunctional oxazolidine were designed and successfully synthesized by transesterification reaction. Their structures were characterized by ¹H NMR, ¹³C NMR, FI-IR, ESI-MS, and elemental analysis. FI-IR spectroscopy was used to study the kinetics of oxazolidines hydrolysis reactions. Furthermore, the applications of resulting oxazolidines as latent curing agents in single-component polyurethane (SPU) systems were investigated. The experimental results showed that the pure SPU specimen cured under atmospheric moisture formed lots of foaming and presented serious swelling. In contrast, the SPU specimens including oxazolidines and latent curing agents displayed considerable enhancement in the mechanical properties, apparent performance, and curing rate. Compared with SPU–OX_i curing samples, the tensile strength of the SPU-OX₂ reached up to 1.78Mpa, and the elongation at break increased to 533.0%, resulting from the dual effects of the high cross-linking density and the urethane group in OX₂.     

Binary copolymerization of 4‐methyl‐1,3‐pentadiene with styrene,butadiene and isoprene catalysed by a titanium [OSSO]‐type catalyst

Binary copolymerization of 4‐methyl‐1,3‐pentadiene (4MPD) with styrene, butadiene and isoprene promoted by the titanium complex dichloro{1,4‐dithiabutanediyl‐2,2′‐bis[4,6‐bis(2‐phenyl‐2‐propyl)phenoxy]}titanium activated by methylaluminoxane is reported. All the copolymers are obtained in a wide range of composition and the molecular weight distributions obtained from gel permeation chromatographic analysis of the copolymers are coherent with the materials being copolymeric in nature. The copolymer microstructure was fully elucidated by means of ¹H NMR and ¹³C NMR spectroscopy. Differential scanning calorimetry shows an increase of glass transition temperature (T_g) with the amount of 4MPD in the copolymers with butadiene and isoprene, while in the copolymers with styrene T_g is increased on increasing the amount of styrene. © 2016 Society of Chemical Industry     

New,organo‐soluble,thermally stable aromatic polyimides and poly(amide‐imide) based on 2‐[5‐(3,5‐dinitrophenyl)‐1,3, 4‐oxadiazole‐2‐yl]pyridine

New, thermally stable polyimides and a poly(amide‐imide) containing a 1,3,4‐oxadiazole‐2‐pyridyl pendant group based on 2‐[5‐(3,5‐diaminophenyl)‐1,3,4‐oxadiazole‐2‐yl]pyridine were synthesized. The synthesis and characterization of the model compound 2‐{5‐[(3,5‐bistrimellitimido)phenyl]‐1,3,4‐oxadiazole‐2‐yl}pyridine (DIDA) were also investigated, and DIDA was used in the preparation of the poly(amide‐imide) in an ionic liquid, 1‐butyl‐3‐methylimidazolium bromide, as a polymerization solvent. The polymers were characterized by separating and characterizing the poly(amic acid) intermediates using infrared and elemental analyses. The prepared polymers were soluble in polar and aprotic solvents, such as dimethylformamide, dimethylsulfoxide, N‐methyl‐2‐pyrrolidone and dimethylacetamide. Thermal behaviour of the polymers was studied using thermogravimetric analysis and differential scanning calorimetry. The inherent viscosities of the polyimide and poly(amide‐imide) solutions were in the range 0.34–0.85 dL g^?1 (in concentrated sulfuric acid with a concentration of 0.125 g dL^?1 at 25 ± 0.5 °C). The removal of Co(II) from aqueous solutions was performed using one of the polyimides. It was found that this polymer had a maximum adsorption capacity and efficiency at pH = 10.0. Copyright © 2012 Society of Chemical Industry     

Synthesis and characterization of novel soluble pyridine‐containing polyimides based on 4‐phenyl‐2,6‐bis[4‐(4‐aminophenoxy)phenyl]‐pyridine and various aromatic dianhydrides

A new kind of pyridine‐containing aromatic diamine monomer, 4‐phenyl‐2,6‐bis[4‐(4‐aminophenoxy)phenyl]‐pyridine (PAPP), was successfully synthesized by a modified chichibabin reaction of benzaldehyde and a substituted acetophenone, 4‐(4‐nitrophenoxy)‐acetophenone (NPAP), followed by a reduction of the resulting dinitro compound 4‐phenyl‐2,6‐bis[4‐(4‐nitrophenoxy)phenyl]‐pyridine (PNPP) with Pd/C and hydrazine monohydrate. The aromatic diamine was employed to synthesize a series of new pyridine‐containing polyimides by polycondensation with various aromatic dianhydrides in N‐methy‐2‐pyrrolidone (NMP) via the conventional two‐step method, i.e., ring‐opening polycondensation forming the poly (amic acid)s and further thermal or chemical imidization forming polyimides. The inherent viscosities of the resulting polyimides were in the range of 0.79–1.13 dL/g, and most of them were soluble in common organic solvents such as N,N‐dimethylacetamide (DMAc), NMP, and tetrahydrofuran (THF), etc. Meanwhile, strong and flexible polyimide films were obtained, which had good thermal stability, with the glass transition temperatures (T_g) of 268–338°C and the temperature at 5% weight loss of 521–548°C in air atmosphere, as well as outstanding mechanical properties with tensile strengths of 89.2–112.1 MPa and elongations at break of 9.5–15.4%. The polyimides also were found to possess low dielectric constants ranging from 2.53 to 3.11. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 212–219, 2007     

Synthesis of poly(methylphenylsiloxane) rich in syndiotacticity by Rh‐catalysed stereoselective cross‐dehydrocoupling polymerization of optically active 1,3‐dimethyl‐1,3‐diphenyldisiloxane derivatives

Cross‐dehydrocoupling reactions of (R)‐methyl(1‐naphthyl)phenylsilane (>99%ee) with (S)‐methyl(1‐naphthyl)phenylsilanol (>99% ee) proceeded with 82–99% retention of configuration of chiral silicon centres in the presence of various Rh‐catalysts. Cross‐dehydrocoupling polymerization of 1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxanediol with 1,3‐dihydro‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxane gave poly(methylphenylsiloxane) of moderate molecular weight in toluene at 60 °C in the presence of [RhCl(cod)]₂ (5.0 mol%) and triethylamine (1.0 equivalent). Assignment of the triad signals of the resulting polymer was made by ¹H NMR spectroscopy of the methyl proton (I = 0.04, H = 0.09 and S = 0.14 ppm) and ¹³C NMR spectroscopy of the ipso carbon of the phenyl group (S = 136.7, H = 136.9, and I = 137.1 ppm). Although the reaction of optically pure (S,S)‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxanediol with 1,3‐dihydro‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxane [(S,S):(S,R):(R,R)] = 84:16:0] gave a poly(methylphenylsiloxane) of rather low molecular weight, its triad tacticity was found to be rich in syndiotacticity (S:H:I = 60:32:8) by ¹³C NMR spectroscopy. © 2001 Society of Chemical Industry     

Synergistic extraction of rare earths(III) from chloride medium with mixtures of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate

The synergistic effect of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 (HPMBP, HA) and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate (DEHEHP, B) in the extraction of rare earths (RE) from chloride solutions has been investigated. Under the experimental conditions used, there was no detectable extraction when DEHEHP was used as a single extractant while the amount of RE(III) extracted by HPMBP alone was also low. But mixtures of the two extractants at a certain ratio had very high extractability for all the RE(III). For example, the synergistic enhancement coefficient was calculated to be 9.35 for Y³⁺, and taking Yb³⁺ and Y³⁺ as examples, RE³⁺ is extracted as RE(OH)A₂.B. The stoichiometry, extraction constants and thermodynamic functions such as Gibbs free energy change ΔG (?17.06 kJ mol^?1), enthalpy change ΔH (?35.08 kJ mol^?1) and entropy change ΔS (?60.47 J K^?1 mol^?1) for Y³⁺ at 298 K were determined. The separation factors (SF) for adjacent pairs of rare earths were calculated. Studies show that the binary extraction system not only enhances the extraction efficiency of RE(III) but also improves the selectivity, especially between La(III) and the other rare earth elements. Copyright © 2006 Society of Chemical Industry     

Synthesis and biodegradability evaluation of 2‐methylene‐1,3‐dioxepane and styrene copolymers

Biodegradable copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and styrene (ST) were synthesized by free‐radical copolymerization using di‐t‐butyl peroxide (DTBP) as the initiator. The copolymers containing ester units were characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR spectroscopy. Their molecular weight and polydispersity index were determined by gel permeation chromatography (GPC). In vitro enzymatic degradation of poly(MDO‐co‐ST) was performed at 37°C in phosphate buffer solution (PBS, pH = 7.4) in the presence of Pseudomonas lipase or crude enzyme extracted from earthworm. The experiment showed that incorporating ester units into C? C backbone chain of polystyrene would result in a biodegradable copolymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1146–1151, 2007     

A Novel Competitive Class of α‐Glucosidase Inhibitors: (E)‐1‐Phenyl‐3‐(4‐Styrylphenyl)Urea Derivatives

Competitive glycosidase inhibitors are generally sugar mimics that are costly and tedious to obtain because they require challenging and elongated chemical synthesis, which must be stereo‐ and regiocontrolled. Here, we show that readily accessible achiral (E)‐1‐phenyl‐3‐(4‐strylphenyl)ureas are potent competitive α‐glucosidase inhibitors. A systematic synthesis study shows that the 1‐phenyl moiety on the urea is critical for ensuring competitive inhibition, and substituents on both terminal phenyl groups contribute to inhibition potency. The most potent inhibitor, compound 12 (IC₅₀=8.4 μM , K_i=3.2 μM ), manifested a simple slow‐binding inhibition profile for α‐glucosidase with the kinetic parameters k₃=0.005256 μM ^?1 min^?1, k₄=0.003024 min^?1, and ${K{{{\rm app}\hfill \atop {\rm i}\hfill}}}$ =0.5753 μM .