Thermo-physiological comfort characteristics of polyester air-jet-textured and cotton-yarn fabrics

Air-jet-textured polyester yarns were produced using two feed yarns differing in filament fineness and number of filaments. By varying the overfed rates of feed yarns and changing their positions in core and effect, five textured yarns were produced. Woven fabrics were prepared using these textured yarns as weft and cotton yarns in warp. To study the effect of air-jet-texturing parameters on the thermo-physiological comfort characteristics of fabric, the woven fabrics were tested for thickness, thermal properties, transverse wicking and air permeability. It is observed that thermal conductivity and resistance of fabrics are not influenced by the texturing parameters/textured yarn structure. These properties are mainly dependent on the entrapped air present in fabrics. Thermal absorptivity is a transient phenomenon of heat flow reflecting that the ‘warm-cool feeling’ effect of fabrics depends on smoothness/roughness of fabric surface. Fabrics with smooth surfaces have higher thermal absorptivity values as they provide a large area of contact with human skin. The roughness of fabrics depends on the number of surface loops and filament fineness. Transverse wicking of fabrics depends on the size, continuity and alignment of the capillaries present in the core of textured yarns.     

Analysis of thermal comfort properties of fabrics for protective applications

Protective clothing protects the body from external influence like heat, chemicals, mechanical hazards, bad weather, etc. by shielding the human body from harsh environmental effects. The maintenance of thermal balance is one of the most important aspects of protective clothing. The study aims to investigate the thermal comfort properties of woven hybrid fabrics produced with high performance core spun yarns. For this purpose, meta-aramid, e-glass, Technora® and Dyneema® fibres were combined using core yarn spinning method in order to enhance the protective performance characteristics. The effects of the core/sheath ratio and type of core materials on the thermal comfort characteristics were investigated and evaluated statistically. The results revealed that, core/sheath ratio, types of core materials have significant effects on thermal comfort characteristics of the fabrics. As the core ratio increases from 19 to 56%, the air permeability of the fabrics increases whereas their thermal conductivity and thermal absorptivity properties decrease. Meta-aramid/E-glass core fabrics can be preferable for protective clothing due to high air permeability and thermal conductivity values.     

An investigation of thermal comfort properties of Abaya woven fabrics

Abaya is a traditional Muslim woman’s outer garment. It is black in colour, and must be worn over the normal day-to-day clothing according to Islamic law. It is mandatory to wear Abaya in Arabian Gulf countries irrespective of the outside environmental temperature, which can be up to 50°C. Having many layers of clothing including Abaya makes it extremely uncomfortable for the wearer in a hot environment. Thermal comfort performance is, therefore, essential for fabrics used for Abaya. This study investigated some commercially available woven Abaya fabrics for thermal resistance, air permeability, thermal comfort, vapour resistance and fabric structural and surface properties. The results indicated that the Abaya fabrics with different weave structures, fibre composition and fabric weight have greater influence on the fabric thermal comfort performance.     

Study on effect of blend ratio on thermal comfort properties of cotton/nylon-blended fabrics with high-performance Kermel fibre

This study presents the thermal comfort properties of woven fabrics made of Kermel, cotton/nylon and cotton/nylon /Kermel-blended yarns. Our aim in this study is to combine the high comfort properties of cotton/nylon fibres with high thermal protective properties of Kermel fibre in different woven fabrics. Thus, Kermel (100%), cotton/nylon (50:50) and four blends of the 50% cotton fibres with nylon and Kermel (40:10, 30:20, 20:30 and 10:40) were spun on a ring-spinning frame and twisted into two-folded yarns with the same yarn count of 30/2(Ne) and twist level of 560 TPM. Using the produced yarns, woven fabrics with identical characteristic and structure were also produced. Then, the thermal comfort and physical properties of fabrics were studied in terms of fabric porosity, thermal resistance, thermal conductivity, water vapour resistance and air permeability. The results show that the porosity, air permeability and thermal resistance increase with Kermel fibre blend ratio. Conversely, the water vapour resistance decreases with increase of Kermel fibre blend ratio up to 40%, while 100% Kermel-woven fabric exhibits a higher water vapour resistance value. Nevertheless, the thermal conductivity of cotton/nylon-blended Kermel woven fabric is unchanged with increase of Kermel fibre blend ratio up to 40%, whereas at 100% Kermel fibre blend ratio, the lowest thermal conductivity is obtained. The obtained results implied that woven fabric produced from cotton/nylon (50/10) blended with 40% Kermel fibre resulted in proper thermal comfort properties.     

Thermo-physiological and comfort properties of Ugandan barkcloth from Ficus natalensis

The United Nations Educational, Scientific and Cultural Organization in 2005 proclaimed that Ugandan barkcloth largely produced from mutuba tree (Ficus natalensis) as a “Masterpiece of the Oral and Intangible Heritage of Humanity”. An exploratory investigation of thermo-physiological and comfort properties of barkcloth, a nonwoven material produced through a series of pummeling processes from mutuba tree in Uganda, is fronted. Barkcloth was extracted from the F. natalensis tree in Nsangwa village, Buyijja parish in Mpigi district, Central Uganda. Thermal conductivity, thermal diffusivity, thermal absorptivity, thermal resistance, fabric thickness, and peak heat flow density were measured using an Alambeta device, whereas a Permetest device was used for the measurement of the moisture vapour permeability and evaporation resistance. The study was carried out under relative humidity of 40% and at a laboratory room temperature of 24°C and the results show that the thermal conductivity is in the range of cotton fabrics rendering barkcloth from F. natalensis, a comfortable fabric. The lower value of thermal absorptivity of barkcloth compared to the value of cotton renders the fabric a warm feeling when in contact with the skin. Barkcloth had a higher moisture vapor permeability compared to cotton and other fabrics, meaning its clothing comfort properties are reasonable.     

Thermophysiological comfort properties of selected knitted fabrics and design of T-shirts

Thermal comfort is one of the most important components of comfort which shows physiological, psychological, and physical harmony between human body and environment. The heat and moisture transfer capacity of fabric from skin to environment affects the thermal comfort of garments. The transfer capacity depends on the characteristic features of raw materials and fabric structural properties. In this study, it is aimed to determine the advantages of knitted fabric types, taking into account the environmental condition and activity level by measuring the thermal comfort properties such as air permeability, wicking, moisture management, thermal and water vapor resistances. Two knitted structures composed of tuck and float combinations and six raw materials were chosen for the fabrics produced. According to the measurement results, the polyester and cotton/Coolmax fabrics with float stitches have had good liquid moisture transport properties. Besides, high air permeability and low water vapor resistance have been obtained in viscose and Tencel LF fabrics with tuck stitches. On the basis of the results obtained in this investigation, and taking into consideration thermal behavior of human body, four women’s and five men’s T-shirts are designed. These T-shirt designs may be helpful for further approaches on the optimization of thermal comfort for sports activities in hot environment.     

A study on thermophysiological comfort properties of fabrics in relation to constituent fibre fineness and cross-sectional shapes

The present study reports the effect of linear densities and profiles of polyester fibres on the physiological properties of their fabrics. Four different polyester fibre finenesses along with microdenier and four cross-sectional shapes (circular, scalloped oval, tetrakelion and trilobal) were selected to produce two sets of 2/1 twill fabrics; one composed of 100% polyester and the other 67:33 P/V blends. In studying the thermophysiological component of the clothing comfort, heat, air and moisture transmission characteristics of the fabrics were assessed. The principal thermal properties, such as thermal absorptivity, thermal resistance and thermal conductivity, were experimentally evaluated, using the Alambeta instrument. The study of the obtained results established the fabrics of non-circular cross-sections as against circular ones, and increase in the linear density results in higher thermal resistance, lower thermal conductivity and lower thermal absorptivity. Wicking behaviour of fabrics was studied under two conditions–wicking from an infinite liquid reservoir (transverse wicking) and wicking from a finite liquid reservoir (single drop wicking into the fabrics). Increase in fibre linear density enhances transplaner wicking but slows down the spreading speed of water drops. Air permeability and moisture vapour permeability are found to be positively correlated with fibre decitex. The role of fibre cross-sectional shapes in influencing mass-flow characteristics is quite considerable. Use of non-circular polyester in place of a circular one augments the wickability of liquid water along with the permeability of air and moisture vapour through the fabrics, revealing their high porosity, which assists air and moisture to propagate. Mixing viscose into polyester brings down the air permeability and moisture vapour transmission rate (MVTR) of fabrics. Results show that moisture absorption of viscose is an important factor in influencing the moisture transport characteristics including both wickability and MVTR of 100% viscose and P/V-blended fabrics.     

Investigation of tactile comfort properties of the fabrics treated with microcapsules containing phase change materials (PCMs microcapsules)

In this study, it was focused on the investigation of comfort-related properties of the fabrics treated with microcapsules containing phase change materials (PCMs microcapsules). There are limited findings about the effect of prepared PCM microcapsules on fabric properties related with the tactile comfort. In this work, we applied our produced microcapsules to the cotton fabrics and researched these fabrics’ tactile comfort-related properties such as bending rigidity, drape, fabric–fabric friction, and tenacity. One of the outstanding properties of our microcapsules is reactive carboxylic acid groups on their wall. They have the ability to bind to the fabrics in terms of their reactive chemical groups. Microcapsules on the fabrics can be durable to the effects of the rubbing and repeated washings. The fabric test results indicated that air permeability, bending rigidity, tensile strength decrease with the microcapsule treatment, whereas the fabric drape and coefficient of friction of the fabrics increase depending on the amount of microcapsules added on the fabric.     

A study on thermal properties of single-jersey knitted fabrics produced from ring and compact folded yarns

This paper presents a study on the thermal properties of single-jersey knitted fabrics manufactured using ring, compact and ring/compact folded yarns. The variations in thermal properties depending on the yarn twist and traveller weight of folded yarn single-jersey knits were discussed. It was found that the thermal resistance of knitted fabrics generally increases as the traveller weight decreases, and also water vapour permeability reduces as the traveller weight decreases. The water vapour permeability and air permeability of knitted fabrics increase as the twist increases. The thermal conductivity of knitted fabrics decreases as the twist increases. The air permeability and water vapour permeability values were higher for compact folded yarn fabrics as compared to those values of ring and ring/compact folded yarn fabrics. It is observed that yarn twist and traveller weight have affected different thermal properties of single-jersey folded yarn fabrics.     

Establishing thermal comfort: characterization of selected performance and physical properties of fabrics used in hospital operating room uniforms

The purpose of this research was to characterize selected thermal properties of clothing fabrics available to operating room (OR) workers at the University of Alberta Hospital and to relate the thermal properties to fabric structural characteristics. In this study, we measured the thermal resistance and air permeability of fabrics obtained from surgical gowns, scrubs and warm-up jackets currently in use in ORs in a specific hospital. The results showed that the fabrics from which the surgical gowns were made provide the highest thermal insulation with lowest air permeability, while the warm-up jackets’ fabrics had the greatest air permeability with low thermal insulation values. The clothing options available to workers in the OR fall well below the predicted clothing insulation values for thermal comfort. For workers in the OR, such as anaesthesiologists, who are predominantly sedentary throughout their work shift, the lack of thermally insulating clothing options has consequences for their overall thermal comfort. This study comprises part of a larger ongoing study investigating improving the OR workers thermal comfort through clothing.     

Multi-response optimization of thermophysiological comfort properties of polyester filament woven fabrics

Microfilament woven fabrics are used in many products such as sportswear, rainclothes, windproof clothes, sleeping bags and surgical gowns and for these products, thermophysiological comfort properties are of prime importance. In this study, it is intended to investigate the effects of filament linear density and weft sett on thermophysiological comfort properties. Also, an optimization model was developed to determine the optimum filament linear density and weft sett for the best response variables of air permeability, water vapour permeability and thermal resistance. Four different weft sett and five different filament linear densities were applied in weft direction with three different weave types. In doing so, 60 woven fabric samples were produced. According to ANOVA results and experimental observations, it is observed that, the effect of filament linear density on air and water vapour permeability was minor on microfilament range, whereas the differences between conventional filament and microfilament sample groups are considerable. Also, higher weft sett causes decreasing of air and water vapour permeability. On the other hand, there is no obvious consistent trend for thermal resistance of samples with different filament linear density and weft sett.     

Stab resistance and thermophysiological comfort properties of boron carbide coated aramid and ballistic nylon fabrics

This research presents the stab resistance and thermo-physiological comfort properties of the fabrics prepared from high-performance fibres of aramid (i.e. Kevlar®) and ballistic nylon. The fabric samples were coated with boron carbide to improve the stab resistance properties. The quasistatic stab tests were performed using NIJ 0115.00 standard knife (P1) on the Instron tensile testing machine. The thermo-physiological comfort properties of the fabric samples were evaluated by measuring the air permeability, water-vapour resistance and thermal resistance. It was observed that the application of the coating significantly increased the stab resistance properties of the fabrics. Furthermore, the air permeability was significantly reduced; whereas, the water-vapour resistance and thermal resistance were significantly increased with the application of coating. Hence, the coated fabrics will have to compromise the comfort aspects to achieve the desired protection level, which is the prime requirement for the stab resistant textile materials.     

Comparison of thermal comfort properties of single jersey fabrics produced by hollow yarns with different hollowness ratio

In this study, the thermal comfort properties of single jersey fabrics produced by conventional and hollow cotton yarns with different hollowness ratio have been investigated and compared. For this purpose, thermal conductivity, thermal resistance, thermal absorptivity, air permeability and water vapour permeability of core spun, hollow and conventional yarn fabrics were measured and evaluated statistically. It was observed that thermal comfort properties of single jersey fabrics were affected by the yarn structure and the fibre distribution within the yarn. The results showed that hollow yarn fabrics had better thermal comfort properties than that of conventional yarn fabrics. In hollow yarns, as the hollowness ratio increases, air permeability and thermal conductivity of single jersey fabrics decrease but thermal resistance, thermal absorptivity and water vapour permeability increase. Statistical analysis also indicated that the differences between properties of hollow yarn fabrics and conventional yarn fabrics were significant. Furthermore, the yarn hollowness ratio significantly affects thermal comfort properties of single jersey fabrics.     

Investigating the effect of material and weave design on comfort properties of bilayer-woven fabrics

The paper focuses on the development of a bilayer-woven fabric and investigating the effect of weave design and material type on its comfort properties. Face layer was plain woven with cotton yarn, while two different weave designs (2/2 and 3/1 twill) and four different materials (cotton, polyester, micropolyester and nylon) were used for the back layer. The comfort properties of fabric, including air permeability (AP), thermal resistance, water vapour resistance and overall moisture management capacity, were determined. It was found that both the layers of fabric as a whole contribute to the comfort properties of bilayer fabric. The highest AP was exhibited by fabrics having both layers of cotton, while 3/1 twill samples have a lower value of thermal resistance as compared to the 2/2 twill samples. The results further showed that micro polyester woven in 3/1 twill weave exhibits better comfort properties.     

相变材料在热防护服上的应用研究进展

为深入了解和提高附加相变材料热防护服的热防护性能,对现阶段相变材料在热防护服中的应用、影响因素以及未来研究趋势进行综述.首先介绍了相变材料的类型和特点,阐述了相变材料基于密封袋法、纺丝法和微胶囊技术的织物后整理法在热防护服中的应用;其次回顾了附加相变材料热防护服传热模型的发展过程,重点从相变材料的类型、相变温度、添加量...     

Modelling the thermal resistance of woven fabrics

Thermal resistance of fabrics is an important property influencing an ability of fabrics to protect the human body against cold. In this paper the model of the thermal resistance of woven fabrics is elaborated. Next, an experimental verification was carried out on the basis of the results for 26 cotton woven fabrics of plain weave as well as for 18 cotton fabrics of weaves different to plain. The experiment confirmed that there is a statistically significant and strong correlation between the real values of the fabric thermal resistance measured by means of Alambeta and the predicted value calculated by means of the elaborated model.     

Effect of structural parameters on thermal protective performance and comfort characteristic of fabrics

In an attempt to understand the influence of basic structural parameters of fabrics on thermal protection and comfort, present study mainly focuses on analyzing effect of fabric weaving pattern and fabric weight. Fabric samples of three basic weaving patterns (plain, twill, and satin) and three different weights were prepared. Air permeability of the developed fabric samples was measured. Thermal protective performance of fabrics against radiant heat and flame exposures of two different intensities were measured. Spectral transmission behavior of fabrics was also studied. It was observed that for same fabric weight, protective performance and air permeability of satin woven fabrics were better as compared to the fabrics of other patterns. Protective performance increased and air permeability decreased as fabric weight increased for each type of woven structure included in this study. A new structural parameter is proposed which primarily influences the protective performance of fabrics exposed to either radiant heat, flame, or combined convective/radiant heat exposure.     

Effect of blend proportion on thermal behaviour of bamboo knitted fabrics

This study presents the thermal comfort properties of single jersey knitted fabric structures made from cotton, regenerated bamboo and cotton–bamboo blended yarns. Cotton, bamboo fibre and blends of the two fibres (100% cotton, 100% bamboo, 50:50 cotton:bamboo, 67:33 cotton:bamboo, 33:67 cotton:bamboo) were spun into yarns of identical linear density (20?tex). Each of the yarns so produced was converted to single jersey knitted fabrics with loose, medium and tight structures. The thermal conductivity of the fabrics was generally found to decrease with increase in the proportion of bamboo fibre. The relative water vapour permeability and air permeability of the fabrics were observed to increase with increase in bamboo fibre content. Statistical analysis also indicates that the results are significant for air permeability, thermal resistance, thermal conductivity and relative water vapour permeability of the fabrics.     

基于辐射衰减特征的隔热防护织物有效导热系数简化模型

高温下辐射传热对织物热传递过程贡献显著,为此,介绍火灾高温环境下的耐高温防护织物的内部传热特点,进而提出高温下织物有效导热系数数值传热模型.针对火灾等高温环境下耐高温防护织物内部热辐射渗透衰减问题进行分析,应用有限差分法对隔热防护织物的有效导热系数模型进行数值分析.通过数值求解传热方程,计算出织物的稳态有效导热系数,且...     

Thermal resistance of fabrics vs. thermal insulation of clothing made of the fabrics

The protection of a human body against the negative environmental factors, especially the cold, is one of the crucial functions of clothing. Clothing creates a thermal barrier between the human body and the surroundings. The protective efficiency of clothing goods depends mostly on thermal insulation properties of textile materials applied in clothing. The clothing design, fitting to a user’s body, and a number of layers also play an important role in the phenomenon of the heat exchange between the human organism and its surroundings. The thermal insulation properties of textile materials can be measured by means of different testing devices, such as the “skin model,” the Alambeta, the Permetest, and the Thermo Labo. A measurement of clothing goods from the point of view of their thermal insulation is performed using a thermal manikin. The article presents an investigation of thermal insulation properties of vests by means of thermal manikin. The investigated vests have been made of different textile materials: woven and knitted. The thermal insulation properties of fabrics applied in vests have been measured by means of the Alambeta. The article presents and discusses the relationships between the thermal insulation of vests according to the thermal manikin and the thermal resistance of fabrics applied in the vests.