Innovative Control Strategy for Islanded Small Hydro Power Plant

In many developing countries, there are regions where the electrical grid is weak or nonexistent. However, in these areas, large amounts of distributed energy sources, such as hydro, are often available and could be suitably exploited. To this aim, the low head hydro power plants can play a significant role. In fact, recent technological advances in mini-hydro turbines and decreasing costs of static electricity conversion devices enable to realize suitable power plants for an efficient and profitable exploitation of these sites. One of the major challenges is the integration of the above-mentioned power plants into autonomous electrical systems, islanded and/or disconnectable from the main distribution network. In this paper, an innovative control strategy for a low head hydro power plant supplying users in small clusters of villages is proposed.     

State-Model Based Time-Domain Diagnosis of Internal Faults for Permanent Magnet Synchronous Machine Wind Application

Upon occurrence of an internal fault on the PMSM （permanent magnet synchronous machine）, the topology of the stator is amended causing structural imbalances due to the change of the connection within the windings. In this work, a state model of internal faults of the PMSM is developed. This model is in the （abc） reference frame. The modeling approach is based on the assumption that each stator phase is replaced by two major and minor sub-windings. This model is used subsequently in the residual generation for diagnosis. The fault indicators are obtained by the projection in parity space and estimated using the Luenberger observer. A scenario of fault inter-turn by the short-circuit occurring between phase （a and b） is validated by simulation.     

Analysis of Short Circuit Faults in a System Fed by Wind Turbine

Short circuit and ground failures that are quite common in power transmission lines are investigated. These failures are designed considering a system that is supplied by this wind system, and analyses are interpreted. In the study, a system is set up and it is fed by the wind turbine. Furthermore, the mathematical model of wind turbine and generator is prepared and the results obtained from the simulation are evaluated. The short circuit and ground fault analyzes were performed separately for each of the three phases. ATP （alternative transient program）-EMTP （electromagnetic transients program） program is used in the analysis and the results obtained were found to be quite compatible.     

Simulation Analysis for Massive Deployment of Variable Renewables Employing an Optimal Power Generation Mix Model

This paper develops a high time-resolution optimal power generation mix model in its time resolution of 10 minutes on 365 days by linear programming technique. The model allows us to analyse the massive deployment of photovoltaic system and wind power generation in power system explicitly considering those short-term output variation. PV （photovoltaic） and wind output are estimated, employing meteorological database. Simulation results reveal that variable fluctuation derived from a high penetration level of those renewables is controlled by quick load following operation of natural gas combined cycle power plant, pumped-storage hydro power, stationary NAS （sodium and sulfur） battery and the output suppression control of PV and wind. It additionally turns out that the operational configuration of those technologies for the renewable variability differs significantly depending on those renewable output variations in each season and solving the seasonal electricity imbalance as well as the daily imbalance is important if variable renewables are massively deployed.     

基于Matlab/Simulink的永磁直驱风力发电机组建模和仿真研究

以永磁直驱风力发电机组为研究对象,建立了包括风力机、传动部分、永磁直驱发电机、矢量控制策略、最大风能捕获策略的整体数学模型;应用Matlab/Simulink工具,以建立的数学模型为基础搭建了永磁直驱风力发电机组仿真模型,并以两次阶跃风速为例对所建模型并网后运行特性进行了仿真研究。实现了永磁直驱风力发电机组的最大风能捕获和功率解耦控制,仿真结果表明,永磁直驱风力发电机组具有良好的运行特性,同时验证了所建模型的正确性和有效性。     

Feasibility of Wind Power Generation for the Reduction of Power Costs in Residential Buildings

The installation of wind power generators on buildings located in areas with regular winds may be a suitable investment in a renewable power source. Brazil has a high eolic potential, where the annual mean wind speed may reach over eight meters per second. This case study is aimed to assess the economic feasibility of the installation of small wind power plants in urban areas. This work evaluates a project for the installation of a vertical axis wind turbine in three buildings （15-, 22-, and 26-story） including the following stages： （1） installation of a real-time power meter in the 15-store unit; （2） demand analysis of the 26-store building＇s power consumption; （3） winds survey along the coast of the State of Ceara; （4） analysis of the wind turbines available in the market; （5） simulation aimed to choose the system. Vertical wind power generators offer better conditions of use in urban areas. The turnover time was established to be between four and six years in the three studied units. The installation of a wind power generator on buildings in regions with an adequate eolic regimen reaches a financial return of the investment before the end of the equipment＇s lifespan.     

Design and Evaluation Tool for Operations and Maintenance Logistics Concepts for Offshore Wind Power Plants

In this article, the authors give an overview of different logistics concepts for operation and maintenance of OWPP （offshore wind power plants）. These can be generally classified into onshore based and offshore based concepts. The operation of OWPPs can still be improved as research has shown that the availability of OWPPs is low compared to onshore wind power plants. There are a few tools to calculate operating costs and to evaluate the different concepts. However, most tools have a weak focus on logistics although logistics account for a big share of the costs. The tool the authors are introducing in this article focuses on the logistics processes. It is first explained and then tested with an OWPP scenarin     

Connecting Wind Turbine Generator to Distribution Power Grid--A Preload Flow Calculation Stage

A distribution grid is generally characterized by a high R/X （resistance/reactance） ratio and it is radial in nature. By design, a distribution grid system is not an active network, and it is normally designed in such a way that power flows from transmission system via distribution system to consumers. But in a situation when wind turbines are connected to the distribution grid, the power source will change from one source to two sources, in this case, network is said to be active. This may probably have an impact on the distribution grid to whenever the wind turbine is connected. The best way to know the impact of wind turbine on the distribution grid in question is by carrying out load flow analysis on that system with and without the connection of wind turbines. Two major fundamental calculations： the steady-state voltage variation at the PCC （point of common coupling） and the calculation of short-circuit power of the grid system at the POC （point of connection） are necessary before carrying out the load flow study on the distribution grid. This paper, therefore, considers these pre-load flow calculations that are necessary before carrying out load flow study on the test distribution grid. These calculations are carded out on a test distribution system.     

Impact of Wind Power on the ATC Values in Hydro-Dominated Power System

The wind power generation is increasing in many countries as a result of decreasing technology costs, active government policies for renewable energy sources, environmental concerns, etc.. This paper investigates the impact of wind power generation on ATC （available transmission capacity） calculation. In order to determine the maximum incremental MW transfer possible between two parts of a power system without violating any specified limits, ATCs are calculated. When calculating ATC values, it is necessary to assume production and consumption pattern in power system. Production of wind power depends on the wind speed, which is a random variable and it is impossible to forecast exactly the production of wind power that is needed for the ATCs calculation. In order to investigate influence of the stochastic wind power production on the ATCs value, computer model of Croatian electric power system is made in Power World Simulator. ATCs are calculated for southern part of Croatian power system in which besides wind power, hydro power plants are only type of power generation. Available wind speed measurements are used as input data for wind power production. The results of the ATC calculation for different scenario of wind power production and location in the Southern Croatian power system are presented and discussed in the paper.     

Test Facility for Low Potential Pumped Storage Power Plants and Hydrokinetic Turbines

The electric energy which is generated by wind power plants depends on the wind speed and exceeds with strong permissible wind speed the electric energy requirements of the country. In order not to reduce this electrical energy, it must be stored. The sensible energy storage is currently the pumped storage power plants. As the mountain ranges for conventional pumped storage power plants with drop heights of H 〉 600 m are strictly limited, the development of low potential pumped storage power plants has begun. Increasing the capacity of pumped storage power plants with regard to the wind power plants is urgently needed. In this paper, it is shown using the example of an unneeded port facility, how a port facility can be used after low conversion as a test facility for low potential pumped storage power plants and at the same time for the testing of hydro-kinetic turbines. This type of pump storage power plants does not save the energy due to large drop heights, but primarily due to the large volume flow of water.     

Financial Appraisal of a Small Scale Wind Turbine with a Case Study in Ireland

This research seeks to evaluate the economic benefits to be gained by installing a small-scale wind turbine for a customer with a three-phase electrical supply requirement. The evidence for the claims made in this paper is obtained by using actual data obtained from the installed equipment over a three year period. The objective is to accurately appraise the financial investment using real data. There appears to be limited studies conducted into this type of research, possibly because the renewable energy sector is in the infancy stage in the host country, Ireland. There are some wind energy installations with financial appraisal techniques based on modeled data, which may, or may not, be accurate. The study concludes by claiming that the financial benefits of the wind energy turbine installation had disappointing results when compared to predicted benefits based on modeled data.     

An Advanced Teaching Lab for the Setting up of an Islanded Production Unit

The present paper addresses an advanced teaching lab consisting of setting up an islanded production unit. This teaching lab takes place in the very last semester at master level for students in electrical engineering with energy specialization. The purpose of this teaching lab is to combine knowledge learned in different areas such as power electronics, control, electrical machines and networks, and make use of all of them in practice. The present paper describes in detail the different steps followed by the student to set up an islanded production unit.     

永磁同步风力发电系统最大功率跟踪控制策略及仿真分析

以永磁同步风力发电系统为研究对象,分析了永磁同步风力发电系统的风速、风力机、Boost电路和逆变器模型,研究了风力发电系统的最大功率跟踪控制和并网逆变器控制,在Boost升压电路中利用转速、整流直流电压和导通比三者之间的传递关系制定了最大功率跟踪控制策略,通过简易的PQ解耦幅相控制实现系统并网,提高了系统输出功率因数,恒定了直流母线电压,并基于Matlab/Simulink搭建仿真模型验证了该系统控制策略的有效性。     

New,Simple Blade-Pitch Control Mechanism for Small-Size,Horizontal-Axis Wind Turbines

In the present research work, the pitch-control is carried out such that the rotor blades are rotated around their longitudinal axis while the rotor continues its normal rotation. It is really a challenge to produce a clever design to pitch the rotor blades by the optimal amount so as to maximize the power output at all wind speeds. The mechanism is implemented to a three-blade, horizontal-axis, home-scale wind turbine. The mechanism is powered by a suitable DC （direct-current） motor. The tests were carried out in the open section of a delivery wind tunnel. The air speed was measured by a suitable anemometer. The corresponding rotational speed （rpm） and output voltage at different wind speeds were measured and recorded for calibration of the control system. The mechanism proved to be successful in controlling the pitch angle over a wide range of wind speeds.     

笼型异步发电机在小风电系统中的励磁运用

针对小型永磁同步发电机输出电压随风速变化而同趋势变化,无法自我调节等不足．提出了一种全新的集电力电子技术、控制技术及鼠笼异步发电机于一体的动态励磁方法,即经济可靠的笼型异步发电机结合应用SVG（静止无功发生器）技术的方法。结合物理实验与算例,对笼型异步发电机在离网运行时的励磁特点进行了分析,并通过与永磁同步发电机在有效风速工作范围和整体效率等方面的对比．得出了在小型离网风力发电系统中应用笼型异步发电机,相对永磁同步发电机有诸多优点,有着很好的应用前景。     

风力发电系统输出功率随机波动的仿真分析

针对当前风力发电系统输出功率随机波动的问题,以永磁同步风力发电机(PMSG)与直流侧储能系统(钒氧化还原电池)整合的风力发电系统为基础,进行数字仿真建模,采用MATLAB/Simulink软件对固定负载,变化风速工况;固定风速,负荷瞬变工况;风速和负荷同时变化工况;进行了仿真试验和分析。结果表明,对于采用储能技术的风电场并网功率随机波动的平抑控制,可以利用蓄电池的充放电特性,在风速变化以及负荷瞬变时进行功率平衡的调节。     

并网永磁直驱风电机组故障穿越能力仿真研究

随着电力电子器件成本下降,拥有全功率变换器的永磁直驱风机成为各国关注热点。风电场容量不断增大,要求风电机组具有故障穿越能力。本文以直驱同步风电发电机组为研究对象,利用matlab/simulink搭建了直驱同步风电机组的动态数学模型,对直驱同步风电机组故障穿越能力进行仿真研究,试验结果表明：在风电场接入点发生故障时,直驱同步风电机组具有故障穿越功能。尤其在电网发生电压跌落时,直驱风机能为系统提供一定的无功支撑。有效防止系统电压过多降落。提高了系统故障运行的稳定性。     

Flexible HVDC Transformer for Next Generation Renewable Energy Industry

The growing demand on non-fossil fuel energy has escalated the desire for mega-scale renewable energy power generation, which can no longer be satisfied solely by relying on onshore renewable energy power plants. Outcomes from a recent project funded by the Sixth European Union Framework Programme （FP6）, Project ＂Upwind＂ concluded that larger offshore wind turbines （i.e., 〉 10 MW） are feasible and cost effective. It will be beneficial for such future large scale renewable energy power generators （i.e., large offshore turbines） and plant （i.e., large offshore wind farms） to have a dedicated high efficiency, robust, flexible and low cost power collection, transmission and distribution technology. Proposed in this paper is a compact and effective hybrid HVDC （high voltage direct current） transformer that allows realisation of a highly robust and financially rewarding next generation multi-terminal HVDC system for future offshore renewable energy power plant. This concept, potentially, allows the elimination or minimisation of the need for a centralised local offshore HVDC platform or substation in each wind farm, solar farm, or tidal farm. This paper discusses the study outcome of the proposed hybrid HVDC transformer and the application of a multi-terminal HVDC system in the renewable energy industry, compared to the existing HVAC and VSC （voltage source converters） type HVDC systems.     

Multi-pole permanent magnet synchronous generator wind turbines' grid support capability in uninterrupted operation during grid faults

Emphasis in this paper is on the fault ride-through and grid support capabilities of multi-pole permanent magnet synchronous generator (PMSG) wind turbines with a full-scale frequency converter. These wind turbines are announced to be very attractive, especially for large offshore wind farms. A control strategy is presented, which enhances the fault ride-through and voltage support capability of such wind turbines during grid faults. Its design has special focus on power converters' protection and voltage control aspects. The performance of the presented control strategy is assessed and discussed by means of simulations with the use of a transmission power system generic model developed and delivered by the Danish Transmission System Operator Energinet.dk. The simulation results show how a PMSG wind farm equipped with an additional voltage control can help a nearby active stall wind farm to ride through a grid fault, without implementation of any additional ride-through control strategy in the active stall wind farm.     

Transient analysis of variable-speed wind turbines at wind speed disturbances and a pitch control malfunction

As wind power generation undergoes rapid growth, new technical challenges emerge: dynamic stability and power quality. The influence of wind speed disturbances and a pitch control malfunction on the quality of the energy injected into the electric grid is studied for variable-speed wind turbines with different power-electronic converter topologies. Additionally, a new control strategy is proposed for the variable-speed operation of wind turbines with permanent magnet synchronous generators. The performance of disturbance attenuation and system robustness is ascertained. Simulation results are presented and conclusions are duly drawn.