共查询到20条相似文献,搜索用时 93 毫秒
1.
水性环氧丙烯酸酯共聚物涂料 总被引:6,自引:0,他引:6
采用自制的丙烯酸环氧酯树脂与α,β0-不和乙烯单体共聚,获得了水性环氧丙烯酸酯共聚物树脂,并以此为基料,制得性能优良贮存稳定的色漆,扩大了丙烯酸环氧酯树脂的应用范围。 相似文献
2.
环氧酯-丙烯酸接枝共聚物水性化的研究 总被引:5,自引:2,他引:5
将丙烯酸单体与环氧磷酸酯接技共聚,引入强亲水性基团-COOH使树脂水性化。讨论了制备环氧磷酸酯时磷酸量、丙烯酸量、环氧树脂分子量及其他反应条件,如引发剂等对环氧酯一丙烯酸接枝共聚物水分散稳定性的影响。测定了接枝共聚物的异常粘度一浓度曲线。 相似文献
3.
环氧酯—丙烯酸接枝共聚物水性化的研究 总被引:5,自引:0,他引:5
将丙烯酸单体与环氧磷酸酯接技共聚,引入强亲水性基团-COOH使枝脂水性化。讨论了制备环氧磷酸酯时磷酸量、丙烯酸量、环氧树脂分子量及其他反应条件,如引发剂等对环氧酯-丙烯酸接枝共聚物水分稳定性的影响。测定了接枝共聚物的异常粘度-浓度曲线。 相似文献
4.
5.
(甲基)丙烯酸及其酯类除可与环氧树脂、聚氨酯及(聚)硅氧烷、聚醋酸乙烯进行复合加工外,还可与苯乙烯相互作用,有时加上其他单体或官能材料,合成苯乙烯-丙烯酸(酯)共聚物。苯乙烯-丙烯酸(酯)类共聚物可以衍生加工出许多种类的精细化工产品,应用领域广泛。 相似文献
6.
磁带胶粘剂的性能要求是很复杂的。过去多采用热塑性共聚高分子化合物,如氯乙烯与醋酸乙烯,偏二氯乙烯,丙烯腈之共聚物等。近年来则发展到三元共聚物,缩聚型高分子如酚醛环氧,双组份聚氨酯,聚酚氧以及水乳型胶粘剂如聚丙烯酸酯,聚酰胺,聚醋酸乙烯共聚物等。 相似文献
7.
介绍了环氧丙烯酸酯从双酯合成到双酯的改性,以及近几年新提出的单酯合成及应用的研究现状,评述了环氧丙烯酸酯,尤其是环氧丙烯酸单酯合成的研究进展。 相似文献
8.
9.
10.
11.
介绍了我国环氧树脂的生产消费概况,分析了溴化环氧树脂、邻甲酚醛环氧树脂、双酚F环氧树脂、酚醛环氧树脂和双酚A酚醛环氧树脂等特种环氧树脂的生产和研究进展,提出了我国发展环氧树脂的见解. 相似文献
12.
13.
Epoxy asphalts were prepared by mixing styrene–butadiene–styrene (SBS) modified asphalt with epoxy resin. The curing process and morphology of epoxy asphalts were characterized by infrared spectroscopy and fluorescent microscope, respectively. The effects of epoxy resin contents, ratio of curing agent to epoxy resin and curing temperature on properties of epoxy asphalt were investigated. Results indicated that epoxy resin and epoxy asphalt showed similar curing efficiency. Epoxy asphalts can be cured at 120 or 60°C and its viscosity at 120°C can meet the demands of asphalt mixture mixing and paving. The chemical reaction of epoxy resin in epoxy asphalt is slow and reaction occurs not only with the curing agent but also carboxylic acid in epoxy asphalt. The microstructure of epoxy asphalt transforms from the dispersed structure to networks structure with epoxy resin content increasing and phase transition starts when 30 wt % epoxy resin present in asphalt. The softening point and tensile strength of epoxy asphalt increased with epoxy resin contents increasing. The softening point and tensile strength of epoxy asphalt were markedly improved when epoxy resin content was more than 30 wt %, which is attributed to formation of continuous structure of epoxy resin. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 相似文献
14.
新型环氧树脂、固化剂、复合材料及纳米技术进展 总被引:4,自引:2,他引:2
介绍了新型庶糖环氧树脂、液晶环氧树脂、耐温耐湿环氧树脂及其组成物、改性物 ,新型固化剂如多芳环胺类固化剂、潜伏固化促进剂 ,新型复合材料 ,即碳纤维、玻璃微珠、硅充填、石墨环氧复合材料及纳米复合材料最新进展 相似文献
15.
介绍了国外环氧树脂工业2005-2006年的价格变化,世界各大生产厂商,如美国陶氏化学品公司、捷克Spolchemie公司、日产化学工业公司、日本日立化学品公司、三井化学品公司和沙特的石化生产商Arabian Industrial Development(NAMA)围绕环氧树脂及其配套原料的投资建设动向,日本环氧树脂生产量及在涂料、电气、土木、建筑、粘接及其他领域的消费状况。同时,对新型水性环氧固化剂、具有剪切稳定性的水性环氧分散体、RenPaste无缝成型(SMPs)船舶工业的最新模型树脂及耐热冲击性和耐化学品性、低收缩率、高性能、高强度新型环氧胶黏剂、导电胶黏剂、超高固含量厚膜环氧涂料产品以及柔性环氧-硅氧烷杂混树脂等新领域产品的开发进展分别进行了介绍。 相似文献
16.
17.
18.
19.
New flame-retarding epoxy is synthesized by reacting 3′, 5′, 3Prime;, 5″-tetrabromophenolphthalein (TBPP) with epichlorohydrin and characterized in comparison with commercially available tetrabromobisphenol-A(TBBA) epoxy on their flame retardancy and thermostability. TBPP epoxy show better results in promoting flame resistance than TBBA epoxy. However, TBPP epoxy exhibits a greater effect on thermal decomposition temperature. The order of char yield at 800°C under nitrogen for the cured products is TBPP epoxy > phenolphthalein (PP) epoxy > TBBA epoxy. Meanwhile, there is a linear relationship between oxygen index and char yield for cured products of TBPP-PP epoxy and TBBA-BA epoxy systems. 相似文献
20.
环氧改性水性聚氨酯涂料的合成与性能研究 总被引:34,自引:5,他引:34
采用环氧树脂与聚醚、二羟甲基丙酸(DMPA)和甲苯二异氰酸酯(TDI)反应制备水性聚氨酯涂料。研究发现随着所用的环氧树脂的环氧值的降低,改性水性聚氨酯涂膜的硬度和拉伸强度逐渐提高,断裂伸长率则随着降低。选用环氧值为0.44的环氧树脂所合成的改性水性聚氨酯的涂膜硬度达到玻璃硬度0.70;随着环氧树脂添加量增大,涂膜机械性能增加。采用后添加环氧树脂的合成工艺,可制备贮存稳定的水性聚氨酯乳液;凝胶渗透色谱(GPC)分析表明环氧树脂改性水性聚氨酯提高了聚氨酯的分子量。性能测试表明环氧改性水性聚氨酯涂料具有涂膜硬度高、耐水性好和耐溶剂性好等优点。 相似文献