Arsenic removal from water by photocatalytic functional Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> porous ceramic

Fe₂O₃–TiO₂ porous ceramic (Fe/TiPC) beads with photo-catalytic performances and high adsorption capacities were prepared by a simple high temperature solid reaction and were applied for arsenic removal from drinking water. The microstructure and morphology of Fe/TiPC were characterized by X-ray diffraction and scanning electron microscopy. More than 90% removal ratio for As (III) and As (V) were respectively achieved by Fe/TiPC within 2 h under UV irradiation. The Langmuir capacity values of Fe/TiPC for As (III) and As (V) were 13.86 and 15.73 mg/g, respectively. In addition, Fe/TiPC could be reused for up to five times without significant reduction in the photocatalytic sensitivity and adsorption capacity aspects. Good catalytic oxidation performances and high adsorption capacities as well as a sample preparation for Fe/TiPC suggest that the composites may have practical prospects for the As (III) and As (V) removal from contaminated water.     

Facile preparation of poly(ε-caprolactone)/Fe3O4@graphene oxide superparamagnetic nanocomposites

The main goal in this work was to prepare and characterize a kind of novel superparamagnetic poly(ε-caprolactone)/Fe₃O₄@graphene oxide (PCL/Fe₃O₄@GO) nanocomposites via facile in situ polymerization. Fabrication procedure included two steps: (1) GO nanosheets were decorated with Fe₃O₄ nanoparticles by an inverse co-precipitation method, which resulted in the production of the magnetite/GO hybrid nanoparticles (Fe₃O₄@GO); (2) incorporation of Fe₃O₄@GO into PCL matrix through in situ polymerization afforded the magnetic nanocomposites (PCL/Fe₃O₄@GO). The microstructure, morphology, crystallization properties, thermal stability and magnetization properties of nanocomposites were investigated with various techniques in detail. Results of wide-angle X-ray diffraction showed that the incorporation of the Fe₃O₄@GO nanoparticles did not affect the crystal structure of PCL. Images of field emission scanning electron microscope and transmission electron microscopy showed Fe₃O₄@GO nanoparticles evenly spread over PCL/Fe₃O₄@GO nanocomposites. Differential scanning calorimeter and polar optical microscopy showed that the crystallization temperature increased and the spherulites size decreased by the presence of Fe₃O₄@GO nanoparticles in the nanocomposites due to the heterogeneous nucleation effect. Thermogravimetric analysis indicated that the addition of Fe₃O₄@GO nanoparticles reduced the thermal stability of PCL in the nanocomposites. The superparamagnetic behavior of the PCL/Fe₃O₄@GO nanocomposites was testified by the superconducting quantum interference device magnetometer analysis. The obtained superparamagnetic nanocomposites present potential applications in tissue engineering and targeted drug delivery.     

Removal of toxic nitrate ions from drinking water using conducting polymer/MWCNTs nanocomposites

New application of conducting polymers as stable nanocomposites for nitrate ion exchange materials in water and wastewater treatment and for environmental protection is introduced in this work. The nanocomposites of multi-walled carbon nanotubes (MWCNTs) with different polymers such as: polyaniline (PANI), polypyrrole (PPY), poly(1,8-diaminonaphthalene) [P(1,8-DAN)] and poly(2-vinylpyridine) (P2VP) were synthesized with different dopants as effective and reusable nanocomposites for nitrate removal from drinking water. Nitrate anions at toxic concentrations were removed from water using ion exchange mechanism without any toxic byproducts. The obtained results demonstrate that effective ion exchange occurs between NO₃ ^? and Cl^?. There are some protonated heteroatoms in polymer chains that are bonded with anions of dopants and their counter ions in nanocomposites. These dopant anions on the =NH⁺– groups of polymers can be exchanged with NO₃ ^? in water. Adsorption of NO₃ ^? on polymer/MWCNTs nanocomposites showed dependency to some parameters. Different experimental parameters such as pH and temperature of the sample, polymers dopant, and the ratio of polymer to MWCNTs in nanocomposites affect the amount of nitrate removal. The highest removal efficiency was achieved at 1.20 g L^?1 of PANI/MWCNTs (3:1) nanocomposite, pH = 6.5 and ambient temperature. After five successive cycles of nitrate removal, this parameter was still up to 70 % compared to the first run (up to 80 %).     

Synthesis and characterization of magnetite (Fe3O4)—Polyvinyl alcohol‐based nanocomposites and study of superparamagnetism

The aim of this investigation was to design iron oxide containing nanocomposites which could display superparamagnetic behavior and thus find application in biomedical and allied fields. To achieve the proposed objectives methyl methacrylate was polymerized by a redox system comprising of metabisulphite and persulphate in the immediate presence of a crosslinker, N,N′‐methylene bis acrylamide and a preformed polymer, i.e., polyvinyl alcohol. Into the prepared polymer matrix nanosized magnetite (Fe₃O₄) particles were evenly dispersed by in situ precipitation of Fe²⁺/Fe³⁺ ions. The nanocomposite materials were characterized by techniques like FTIR, SEM, TEM, XRD, and DSC. The magnetic behavior of nanocomposites and bulk magnetite particles was studied under varying applied magnetic fields and their superparamagnetic property was examined. The iron‐oxide polymer nanocomposites were also studied for microhardness. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Fabrication,characterization, and properties of poly(ethylene‐co‐vinyl acetate)/magnetite nanocomposites

Poly(ethylene‐co‐vinyl acetate) (EVA)/magnetite (Fe₃O₄) nanocomposite was prepared with different loading of Fe₃O₄ nanoparticles. The mixing and compounding were carried out on a two‐roll mixing mill and the sheets were prepared in a compression‐molding machine. The effect of loading of nanoparticles in EVA was investigated thoroughly by different characterization technique such as transmission electron microscopy (TEM), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limiting oxygen index (LOI), and technological properties. TEM analysis showed the uniform dispersion of filler in the polymer matrix and the dispersion of filler decreased with increase in filler content. XRD of the nanocomposite revealed the more ordered structure of the polymer chain. An appreciable increase in glass transition temperature was observed owing to the restricted mobility of Fe₃O₄‐filled EVA nanocomposite. TGA and flame resistance studies indicated that the composites attain better thermal and flame resistance than EVA owing to the interaction of filler and polymer segments. Mechanical properties such as tensile strength, tear resistance, and modulus were increased for composites up to 7 phr of filler, which is presumably owing to aggregation of Fe₃O₄ nanoparticle at higher loading. The presence of Fe₃O₄ nanoparticles in the polymer matrix reduced the elongation at break and impact strength while improved hardness of the composite than unfilled EVA. The change in technological properties had been correlated with the variation of polymer–filler interaction estimated from the swelling behavior. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40116.     

Iron Oxide-Coated on Glass Fibers for Arsenic Removal

A highly efficient adsorbent for arsenic removal from water has been prepared by impregnating high surface area iron oxides on glass fibers. Arsenic in water can easily and efficiently be removed by this adsorbent, without the need to pre-oxidize As(III) to As(V). The iron oxides coated on glass fibers (IOCGFs) can remove both arsenic species well below EPA MCL (10 ppb). IOCGFs should have the following four additional advantages: greatly improved contact efficiency; higher adsorption capacity because of high surface area; low cost and easily available adsorbent since the starting reagents (FeCl₃ and NH₃·H₂O) and glass fiber are cheap and readily available; and high adsorption efficiency of As(III) and As(V).     

Magnetite/graphene/polyaniline composite for removal of aqueous hexavalent chromium

Here, we report the synthesis of Fe₃O₄/G/PANI composite containing magnetite nanoparticles (Fe₃O₄), graphene sheets (G), and polyaniline (PANI) via chemical route for removal of toxic Cr (VI) from water. TEM image shows the formation of uniformly distributed magnetite nanoparticles on graphene/PANI composite. HRTEM images shows the formation of crystalline magnetite nanoparticles showing lattice fringes with inter‐planner distance 0.21 nm. The magnetic measurement shows magnetization 22 emu/g and ferromagnetic property of the adsorbent. The equilibrium adsorptions were well‐described by the Langmuir isotherm model and shows maximum adsorption capacity 153.54 mg/g at pH 6.5 and temperature 30 °C. The kinetics data well fitted by pseudo‐second‐order model and around 86% Cr (VI) removal completed within 20 min. The Cr (VI) removal capacitive decreases with increase in pH and ionic strength. The adsorbent shows leaching of iron nanoparticles at pH 1 whereas stable in solution having pH 2 and more. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44002.     

Influence of Fe3O4 nanoparticles decoration on dye adsorption and magnetic separation properties of Fe3O4/rGO nanocomposites

Magnetite (Fe₃O₄) nanoparticles were prepared by solvothermal method and its composites with reduced graphene oxide namely FG1, FG2, and FG3 (changing magnetite precursor loading 0.1, 0.5, and 1 respectively) were used as adsorbents for the removal of methyl violet (MV) dye. The structural and morphological results confirm that rGO sheets were decorated with Fe₃O₄ and it ensures the variation of active sites toward dye removal property. The maximum adsorption capacity obtained for FG2 was 196 mg/g. The adsorption isotherms and kinetics better fit Langmuir and pseudo-second-order kinetic model for FG1 and FG2. Increasing of Fe₃O₄ loading on rGO reduces the dye adsorption sites and too low Fe₃O₄ loading affects the magnetic separation. The optimal loading of Fe₃O₄ on rGO is important parameter for the adsorption process and fast separation of adsorbent.     

Hyperbranched polyurethane/Fe3O4 thermosetting nanocomposites as shape memory materials

Nanocomposites of hyperbranched polyurethane were prepared by the in situ pre-polymerization technique with Fe₃O₄ nanoparticles. The synthesized Fe₃O₄ nanoparticles were characterized by the Fourier transform infrared spectroscopy and the X-ray diffraction study. The transmission electron microscopic study indicates the homogeneous distribution of Fe₃O₄ nanoparticles in the polymer matrix. The mechanical, thermal and shape memory behaviors of the nanocomposites were studied as a function of nanomaterial content. The glycidyl bisphenol-A based epoxy cured thermosetting nanocomposites exhibited significant improvement of tensile strength (5.7–18 MPa), scratch hardness (3.0–6.5 kg) and thermal stability (241–275 °C) with the increase of the content of Fe₃O₄. The nanocomposites possess excellent shape fixity over the repeated cycles of test. They also showed good shape recovery under the application of microwave energy. The shape recovery speed found to increase with the increase of the loading of Fe₃O₄ in the nanocomposites. Thus, the prepared nanocomposites might be utilized as advanced shape memory materials in their potential fields.     

Adsorption Behaviour of Ethylene Vinyl Acetate and Polycaprolactone-Bentonite Composites for Pb2+ Uptake

The results presented in this work show that the hydrophobic thermoplastics, namely ethylene vinyl acetate (EVA) and polycaprolactone (PCL), could be good matrices for the synthesis of polymer/bentonite composites via the melt-blending method for the removal of heavy metals from water. The hydrophobic nature of the polymers was countered by using dry Na₂SO₄ to form large free-volume pores. These pores, formed after the removal of the Na₂SO₄ by washing, improved the contact ratio between bentonite particles and Pb²⁺ ions. The composites were able to achieve up to 78% Pb²⁺ removal at an initial concentration of 200 mg/L in 10 h with a clay loading of 3% (w/w). The results confirmed that the PCL/bentonite composite was more effective and efficient in the adsorption of Pb²⁺ than the EVA/bentonite composite. The experimental data for both composites followed Langmuir and Freundlich models. The uptake of Pb²⁺ was found to be a result of a chemical interaction between the heavy metal, silanol (Si–OH) and aluminol (Al–OH) groups. The adsorption of Pb²⁺ onto the composites was found to follow pseudo-first-order kinetics and the results supported a monomolecular reaction mechanism.     

A convenient synthesis of NiO-CuS/molecularly imprinted polymer nanocomposites with highly enhanced adsorption activity and selectivity for removal of Letrozole

ABSTRACT

In this study, Novel NiO-CuS nanocomposites were prepared by simple chemical method. The goal of this project was to apply the Letrozole (Anti-estrogen drug) template molecularly imprinted polymer (MIP) for the selective removal of Letrozole from aqueous samples. The NiO-CuS nanocomposites and NiO-CuS/MIP nanocomposites were specified by field emission scanning electron microscopy, X-ray diffraction, photoelectron spectroscopy, N₂ adsorption-desorption, and thermogravimetric analysis. The performance of the NiO-CuS and NiO-CuS/MIP nanocomposites was analyzed by optimizing various removal factors. The optimized data for adsorption process were 0.01 g/L: MIP, contact time: 40 min and pH: 7.0. The data was evaluated best by pseudo 1st and 2nd order equation which revealed a chemical adsorption of letrozole onto NiO-CuS and NiO-CuS/MIP particles, respectively. The result of R² values indicated that the adsorption data followed the Langmuir isotherm equation which defined that the binding agent happened on the homogeneous sites of adsorbent.     

Characterization of stabilized porous magnetite core–shell nanogel composites based on crosslinked acrylamide/sodium acrylate copolymers

Stabilized and dispersed superparamagnetic porous nanogels based on sodium acrylate (AA‐Na) and acrylamide (AM) in a surfactant‐free aqueous system were synthesized via solution polymerization at room temperature. The formation of magnetite nanoparticles was confirmed and their properties characterized using Fourier transform infrared spectroscopy. Extensive characterization of the magnetic polymer particles using transmission electron microscopy (TEM), dynamic light scattering and zeta potential measurements revealed that Fe₃O₄ nanoparticles were incorporated into the shells of poly(AM/AA‐Na). The average particle size was 5–8 nm as determined from TEM. AM/AA‐Na nanoparticles with a diameter of about 11 nm were effectively assembled onto the negatively charged surface of the as‐synthesized Fe₃O₄ nanoparticles via electrostatic interaction. Crosslinked magnetite nanocomposites were prepared by in situ development of surface‐modified magnetite nanoparticles in an AM/AA‐Na hydrogel. Scanning electron microscopy was used to study the surface morphology of the prepared composites. The morphology, phase composition and crystallinity of the prepared nanocomposites were characterized. Atomic force microscopy and argon adsorption–desorption measurements of Fe₃O₄.AM/AA indicated that the architecture of the polymer network can be a hollow porous sphere or a solid phase, depending on the AA‐Na content. © 2013 Society of Chemical Industry     

Fabrication and Characterization of SiO2/(3-Aminopropyl)triethoxysilane-Coated Magnetite Nanoparticles for Lead(II) Removal from Aqueous Solution

A novel nano-adsorbent SiO₂/(3-aminopropyl)triethoxysilane-coated magnetite nanoparticles was synthesized for the adsorption of lead ions from water samples. Its structure and magnetic characteristics were characterized, by FTIR, powder X-ray diffraction, scanning electron microscope (SEM), transmission electron microscope (TEM) and vibrating sample magnetometry (VSM). Amino-functionalized SiO₂ coated Fe₃O₄ magnetite nano-adsorbent exhibited superparamagnetic behavior and strong magnetization at room temperature. The efficiency of the nano-adsorbent in separation of the metals was evaluated by adsorption technique. Kinetic data were analyzed using the pseudo-first-order and pseudo-second-order equations. The data fitted very well to the pseudo-second-order kinetic model.The linear Langmuir and Freundlich models were applied to describe equilibrium isotherms and Langmuir model fitted well. The monolayer adsorption capacity was found as 17.65 mg/g at pH 4.0. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were also calculated. These parameters showed that the adsorption of Pb(II) onto nano-adsorbent was feasible, spontaneous and endothermic. The amino-functionalized SiO₂ coated Fe₃O₄ magnetic nano-adsorbent shows high adsorption capability for metal ions from aqueous solutions via the chelation mechanisms. The Pb(II) loaded nano-adsorbent can be easily recovered from aqueous solution with magnetic separation and regenerated readily by acid treatment. The product of this work can be used as an effective and recyclable nano-adsorbent for the removal of metal ions in wastewater treatment.     

Removal of As(III) from Aqueous Solution Using Functionalized Ultrafine Iron Oxide Nanoparticles

Arsenic toxicity has become a major concern worldwide. Remediation of this problem needs the development of technology with improved materials and systems with high efficiency. We have demonstrated a simple and efficient method for the absolute removal of As(III) from high concentration As(III) treated water with a low contact time period. The process of As(III) adsorption follows pseudo-second-order kinetic model. The mechanism for high-adsorption efficiency is attributed to fatty acid binding domain-mediated surface conjugation of ultrafine Fe₂O₃ nanoparticles with As(III). We have also ensured the simultaneous separation of arsenic sorbed nanoparticles by entrapping them in hydrophilic calcium alginate beads and thereby a pure arsenic free solution has been obtained.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>–β-cyclodextrin–Chitosan Bionanocomposite for Arsenic Removal from Aqueous Solution

The aim of this present work is to investigate the adsorption capacity, kinetics and mechanism of arsenite ion removal onto beta-Cyclodextrin–Chitosan–Fe₃O₄ nanocomposite (β-CD–CS–Fe₃O₄ nanocomposite) from aqueous solutions. Iron oxide nanoparticles (Fe₃O₄) were synthesized using the co-precipitation method and the nanocomposite was successfully prepared via the solution-blending method. The analysis to determine arsenite ion adsorption was carried out using ICP-MS by varying pH, contact time and arsenite concentration parameters. The sorption of arsenite was found to be dependent on pH, time and arsenite initial concentrations. The adsorption equilibrium was reached in the first 20 min with the maximum uptake of 96%. Adsorption data were fitted well to the Langmuir isotherm describing a monolayer adsorption mechanism and pseudo-second-order models for kinetic study. It was established that the β-CD–CS polymer blend grafted with Fe₃O₄ nanoparticles enhanced the adsorption capacity because of the complexation abilities of the multiple OH and NH₂ groups in the polymer backbone with metal ions. Subsequently, the mechanism of adsorption was investigated by studying the physicochemical properties of the adsorbent and the adsorbed species using the FTIR, TGA, DSC, XRD, SEM and TEM techniques. The characterizations before and after incorporations of the β-CD–CS composite with Fe₃O₄ nanoparticles showed well-improved properties for better adsorption of arsenite (As(III)) ions.     

Electrical properties of FeII‐terpyridine‐Modified cellulose nanocrystals and polycaprolactone/FeII‐CTP nanocomposites

Supramolecular crosslinked Fe^II‐terpyridine cellulose nanocrystals (Fe‐CTP) were prepared by surface modification of cellulose nanocrystals with 4′‐chloro‐2,2′:6′,2″‐terpyridine and subsequent reaction with Fe(II)SO₄. The prepared complex was characterized using transmission electron microscopy (TEM), ultraviolet spectroscopy (UV), thermogravimetric analysis (TGA), and measuring its electrical properties at temperatures from 25 to 70°C. Use of Fe‐CTP at loadings from 1% to 10% (wt. ratio) in nanocomposites with polycaprolactone polymer was investigated; the nanocomposites were characterized regarding their electrical properties, which studied using broadband AC‐relaxation spectroscopy in the frequency range between 0.1 Hz and 1 MHz. The results were compared to that of PCL nanocomposites containing multiwalled carbon nanotubes (CNT). Variation in real and imaginary parts of permittivity has been explained on the basis of interfacial polarization of fillers in the polymer medium. The percolation limit of the conductive CNT and Fe‐CTP as studied by ac conductivity measurements has also been reported. Fe‐CTP showed conductivity values in the range of semiconductors. PCL/Fe‐CTP nanocomposites showed conductivity values from 1.98 × 10⁻¹¹ to 3.76 × 10⁻⁶ while PCL/CNT nanocomposites showed conductivity values from 1.4 × 10⁻¹⁰ to 3.67 × 10⁻⁴ S/m for 1–10 wt% CNT content. POLYM. COMPOS., 37:2734–2743, 2016. © 2015 Society of Plastics Engineers     

Synthesis of polyvinyl alcohol hydrogel grafted by modified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: characterization and doxorubicin delivery studies

During the last two decades, serious efforts have been directed towards the synthesis and coating magnetic nanoparticles for biomedical applications. Among many different types of polymeric coating materials that have been utilized in previous studies, we have selected polyvinyl alcohol (PVA). In this study, we report a novel type of magnetite nanocomposite-based PVA hydrogel. For this purpose, first, Fe₃O₄ nanoparticles were modified through hexamethylene diisocyanate (HMDI) and then PVA was modified by bromoacetyl bromide to produce bromoacetylated PVA. The modified PVA was cross-linked through various diamines such as ethylene-diamine, propylene-diamine and hexamethylenediamine. The prepared weak tridimensional PVA hydrogels were further reacted through unreacted hydroxyl groups with Fe₃O₄, modified by HMDI to form magnetite hard tridimensional hydrogels. The swelling behavior of the prepared magnetite nanocomposites were investigated and showed a fast initial swelling followed by a mild increase until attaining equilibrium. The structural, morphological, thermal and magnetic properties of the synthesized magnetite nanocomposites were confirmed by FTIR, thermal gravimetric analysis, vibrating sample magnetometer and scanning electron microscopy. The doxorubicin anti-tumor drug was loaded on a selected synthesized magnetic hydrogel and in vitro drug release studies were done in phosphate buffer solution in 37 °C.     

New Magnetic Polymer Nanocomposites on the Basis of Isotactic Polypropylene and Magnetite Nanoparticles for Adsorption of Ultrahigh Frequency Electromagnetic Waves

In this study, we report about the preparation of magnetic polymer nanocomposites on the basis of isotactic polypropylene and magnetite Fe₃O₄ nanoparticles. The structure and composition of polymer nanocomposite materials have been studied by scanning electron microscopy, atomic force microscopy, and X-ray dispersive analysis. The magnetic properties of polymer nanocomposites based on PP+Fe₃O₄have been investigated. It is found that not significant adhesion and agglomeration of nanoparticles occur, by increasing the nanoparticle content in polymer matrix up to 40%, and therefore they act as single-domain nanoparticles. The samples of nanocomposites based on PP+Fe₃O₄, with up to 40% content of Fe₃O₄, exhibit superparamagnetic properties. It was also found out that the magnetic polymer nanocomposite material based on PP+Fe₃O₄ is able to absorb ultrahigh frequency electromagnetic waves in the frequencies range from 0.1 to 30?GHz. The increase in Fe₃O₄ concentration from 5 to 40% at the 400?µm thicknesses of the films leads to an increase in absorption of electromagnetic waves of high frequency from 15 to 22.7%.     

Ethylene Vinyl Acetate and Polycaprolactone–Organoclay Nanocomposite: Thermal,Mechanical and Morphological Properties

Organoclay of the type Cloisite^® 20A (C-20A) with two structurally different but semicrystalline polymer matrices was studied. Polycaprolactone (PCL), a linear, biodegradable polymer, and ethylene vinyl acetate (EVA), a branched copolymer, were chosen to prepare polymer clay nanocomposites via the melt-blending method. The results show that the structure of a polymer matrix plays a significant role towards compatibilization with the silicate layers of the clay. Scanning electron microscopy and X-ray diffraction analyses revealed an exfoliated-intercalated mixed morphology for the PCL matrix. However, for the EVA matrix, silicate layers agglomerated to form tactoids and resulted primarily in an intercalated morphology. Fourier transform infrared spectroscopy was used to determine the nature of the interactions between the polymer and the filler. The thermal properties were investigated using thermogravimetric analysis and indicated that, with an increase in clay loading, the thermal stability was reduced for both matrices. Tensile tests suggested that Young’s modulus improved for the EVA matrix with an increase in clay dosage whereas for PCL the modulus was found to be highest for 8% clay loading.     

Physicochemical Aspects on Fluoride Adsorption for Removal from Water by Synthetic Hydrous Iron(III) – Chromium(III) Mixed Oxide

Fluoride removal with varying different parameters at 303 ± 1.6 K and pH 6.5 ± 0.2 was investigated by hydrous iron(III)-chromium(III) bimetal oxide. The kinetic and equilibrium data fitted with the pseudo-second order and Langmuir isotherm equations very well (R² = 0.99?1.00), respectively. The Langmuir capacity (θ) and free energy (E_DR) of adsorption evaluated were 16.34 (±0.50) mg·g^?1 and 15.81 kJ·mol^?1, respectively. The estimated thermodynamic parameters viz. ΔH⁰, ΔG⁰, and ΔS⁰ indicated that the reaction was endothermic but spontaneous for entropy increase. The small-scale column filtration of high fluoride (C₀ = 7.37 mg·L^?1) water gave encouraging results.