Bifunctional ternary manganese oxide/vanadium oxide/reduced graphene oxide as electrochromic asymmetric supercapacitor

A bifunctional ternary manganese oxide/vanadium oxide/reduced graphene oxide (MnO₂/V₂O₅/rGO) was developed for asymmetric electrochromic supercapacitor (EC-SC) application. The elemental mapping revealed uniformly distributed MnO₂, V₂O₅ and rGO, depicting homogenous synthesis of the hybrid composite. The phase composition, vibration modes and valance state of the ternary composite were analyzed via X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) analysis, respectively. Interestingly, the as-prepared MnO₂/V₂O₅/rGO composite disclosed tremendous C_sp of 1403.5 F/g, which was higher compared to MnO₂/V₂O₅ (801.1 F/g), V₂O₅ (613.1 F/g), MnO₂ (126.7 F/g) and rGO (60.7 F/g). MnO₂/V₂O₅/rGO that appeared in dark green switched its visual color to orange at the charged state, confirming the electrochromic property. The bifunctional manganese oxide/vanadium oxide/reduced graphene oxide//copper-based metal-organic framework/reduced graphene oxide (MnO₂/V₂O₅/rGO//MrGO) asymmetrical EC-SC device revealed outstanding cycling stability (90.3% charge retention over 5000 cycles), tremendous specific capacitance (652.7 F/g) and maximum specific energy (60.4 Wh/kg). MnO₂/V₂O₅/rGO//MrGO asymmetrical EC-SC device demonstrated reversible color changes from dark green to orange at the discharged and charged states, respectively. The significantly great electrochromic and supercapacitive performance revealed that MnO₂/V₂O₅/rGO//MrGO is an outstanding electroactive candidate for the next generation of electrochromic supercapacitors.     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

NiMn2O4/还原氧化石墨烯复合材料的制备及其超级电容性能

采用水热法制备了NiMn₂O₄/还原氧化石墨烯（NiMn₂O₄/rGO）复合电极材料,研究了石墨烯对NiMn₂O₄/rGO材料形貌、微观结构及电化学性能的影响。结果表明：NiMn₂O₄纳米片沉积在石墨烯片的表面,聚集现象消失。与纯NiMn₂O₄相比,NiMn₂O₄/rGO具有高的比表面积和优良的电化学性能。在1A/g时具有1375F/g的比电容,而纯NiMn₂O₄的比电容为924F/g。5000次充放电后,NiMn₂O₄/rGO在5A/g时的比电容保留率为90%,而NiMn₂O₄的比电容保留率为78%。NiMn₂O₄/rGO表现出良好的电容性能,作为超级电容器电极材料具有广泛的应用前景。     

Facile synthesis of reduced graphene oxide/MWNTs nanocomposite supercapacitor materials tested as electrophoretically deposited films on glassy carbon electrodes

This paper reports on a facile synthesis method for reduced graphene oxide (rGO)/multi-walled carbon nanotubes (MWNTs) nanocomposites. The initial step involves the use of graphene oxide to disperse the MWNTs, with subsequent reduction of the resultant graphene oxide/MWNTs composites using l-ascorbic acid (LAA) as a mild reductant. Reduction by LAA preserves the interaction between the rGO sheets and MWNTs. The dispersion-containing rGO/MWNTs composites was characterized and electrophoretically deposited anodically onto glassy carbon electrodes to form high surface area films for capacitance testing. Pseudo capacitance peaks were observed in the rGO/MWNTs composite electrodes, resulting in superior performance with capacitance values up to 134.3 F g^?1 recorded. This capacitance value is higher than those observed for LAA-reduced GO (LAA-rGO) (63.5 F g^?1), electrochemically reduced GO (EC-rGO) (27.6 F g^?1), or electrochemically reduced GO/MWNTs (EC-rGO/MWNTs) (98.4 F g^?1)-based electrodes.     

Far-infrared reduced graphene oxide as high performance electrodes for supercapacitors

We report a novel far-infrared (FIR) thermal reduction process to effectively reduce graphene oxide films for supercapacitor electrode applications. The binder-free graphene oxide films used in this study were produced by electro-spray deposition of a graphene oxide colloidal solution onto stainless steel current collectors. The reduction of graphene oxide was performed using a commercial FIR convection oven that is ubiquitous in homes for cooking and heating food. The reduction process incorporated a simple, one-step FIR irradiation carried out in ambient air. Further, the FIR irradiation process was completed in ∼3 min, wherein neither special atmosphere nor high temperature was employed, resulting in an economic, efficient and simplified processing technique. The as-produced FIR graphene electrode gave a specific capacitance of ∼320 F/g at a current density of ∼0.2 A/g with less than 94% loss in specific capacitance over 10,000 charge/discharge cycles. This is one of the best specific capacitances reported for all-carbon electrodes without any additives. Even at ultrafast charge/discharge rates (current densities as high as ∼100 A/g), the FIR graphene electrode still delivered specific capacitances in excess of 90 F/g. The measured energy and power densities of the FIR supercapacitors were found to be ∼3–6 times higher than commercial (activated carbon) supercapacitor devices. This excellent electrochemical performance of the FIR graphene coupled with its ease of production (in air at low temperatures) using a commercial home-use FIR convection oven indicates the significant potential of this concept for large-scale commercial electrochemical supercapacitor applications.     

Flash sintering of alumina/reduced graphene oxide composites

The flash sintering behavior of Al₂O₃/reduced graphene oxide (rGO) composites was investigated. rGO was used as a composite component and a conductive additive. Under the electric fields of 250–400 V cm⁻¹, the flash event occurred at extremely low temperatures of 236–249 °C. The current density limit played a significant role in the degree of densification. A larger current density resulted in a higher density of the sample. However, current densities larger than 33.33 A cm⁻² resulted in broken samples because of the localization of high current density coupled with the formation of hot spots. Flash sintering at a furnace temperature of 800 °C, electric field of 300 V cm⁻¹ and current density limit of 33.33 A cm⁻² produced nearly completely dense Al₂O₃/rGO composites. In addition to the current limit, the furnace temperature is also a key parameter that controls the degree of densification to achieve “safe” flash sintering.     

Simultaneously morphology and phase controlled synthesis of cobalt manganese hydroxides/reduced graphene oxide for high performance supercapacitor electrodes

Cobalt manganese hydroxides with well-defined nanowire morphology (CoMn-HW) is scalable fabricated by adjusting solution contents, Mn/Co ratio and alkaline species. To further improve the conductivity of CoMn-HW, GO is introduced during fabrication process and reduced to rGO according to the high temperature and alkali atmosphere. By optimizing the adding mass of rGO, CoMn-HW/rGO with sandwiched like structure is successfully synthesized for supercapacitor electrode. The composite delivers a high specific capacitance of 784 F g⁻¹ at current density of 0.5 A g⁻¹, good rate capability (84.2% capacitance retention after current density increase 10 times). Moreover, an asymmetric supercapacitor with CoMn-HW/rGO10 as the positive electrode and active carbon as the negative electrode, is assembled and delivers a maximum energy density of 38.3 Wh kg⁻¹ and power density of 8000 W kg⁻¹, representing its potential in energy storage and conversion systems.     

Reduced graphene oxide/hierarchal spinel nickel cobaltite nanoflowers composites for supercapacitor electrodes with ultrahigh capacitive and excellent rate performance

Researchers are extensively investigating transition metal oxides due to their unique porous architectural structure and remarkable electrochemical properties, which are suitable to boost the energy storage capabilities. In present work, facile chemical route was used to synthesize hierarchal spinel nickel cobaltite nanoflowers anchored reduced graphene oxide (NiCo₂O₄-rGO) as high performance electrode material. NiCo₂O₄ anchored rGO demonstrated specific capacitance of 2695 Fg^-1 at 1 Ag^-1, which is greater than pristine NiCo₂O₄ nanoflowers specific capacitance. NiCo₂O₄-rGO showed excellent stability and retention capability of 96% after 2500 cycles at 5 Ag^-1. Furthermore, NiCo₂O₄–rGO exhibited maximum energy density of 93.57 WhKg^?1 at power density of 250 WKg^-1. We have achieved specific capacitance and retention capability which is higher than previously reported results. This enhancement is mainly attributed to the spinel structure of NiCo₂O₄ and its robust structural affinity with rGO. Moreover, rGO possesses extended surface area provided ample of active sites and exceptional synergetic effect which helped to enhance the induction and consequently transportation of e^?/h⁺. More importantly due to its special morphological effects, in future NiCo₂O₄ anchored rGO nanoflowers may open new avenue in research but also used as an efficient electrode material for the construction of high performance supercapacitors.     

MoO3/reduced graphene oxide composites as anode material for sodium ion batteries

MoO₃/reduced graphene oxide (MoO₃/RGO) composites were successfully prepared via a facile one-step hydrothermal method, and evaluated as anode materials for sodium ion batteries (SIBs). The crystal structures, morphologies and electrochemical properties of the as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge tests, respectively. The results show that the introduction of RGO can enhance the electrochemical performances of MoO₃/RGO composites. MoO₃/RGO composite with 6 wt% RGO delivers the highest reversible capacity of ~208 mA h g⁻¹ at 50 mA g⁻¹ after 50 cycles with good cycling stability and excellent rate performance for SIBs. The excellent sodium storage performance of MoO₃/RGO should be attributed to the synergistic effect between MoO₃ and RGO, which offers the increased electrical conductivity, the facilitated electron transfer ability and the buffering of volume expansion.     

High-performance supercapacitor of manganese oxide/reduced graphene oxide nanocomposite coated on flexible carbon fiber paper

Although supercapacitors have higher power density than batteries, they are still limited by low energy density and low capacity retention. Here we report a high-performance supercapacitor electrode of manganese oxide/reduced graphene oxide nanocomposite coated on flexible carbon fiber paper (MnO₂–rGO/CFP). MnO₂–rGO nanocomposite was produced using a colloidal mixing of rGO nanosheets and 1.8 ± 0.2 nm MnO₂ nanoparticles. MnO₂–rGO nanocomposite was coated on CFP using a spray-coating technique. MnO₂–rGO/CFP exhibited ultrahigh specific capacitance and stability. The specific capacitance of MnO₂–rGO/CFP determined by a galvanostatic charge–discharge method at 0.1 A g⁻¹ is about 393 F g⁻¹, which is 1.6-, 2.2-, 2.5-, and 7.4-fold higher than those of MnO₂–GO/CFP, MnO₂/CFP, rGO/CFP, and GO/CFP, respectively. The capacity retention of MnO₂–rGO/CFP is over 98.5% of the original capacitance after 2000 cycles. This electrode has comparatively 6%, 11%, 13%, and 18% higher stability than MnO₂–GO/CFP, MnO₂/CFP, rGO/CFP, and GO/CFP, respectively. It is believed that the ultrahigh performance of MnO₂–rGO/CFP is possibly due to high conductivity of rGO, high active surface area of tiny MnO₂, and high porosity between each MnO₂–rGO nanosheet coated on porous CFP. An as-fabricated all-solid-state prototype MnO₂–rGO/CFP supercapacitor (2 × 14 cm) can spin up a 3 V motor for about 6 min.     

Preparation and properties of reduced graphene oxide/fused silica composites

An in situ strategy for fabrication of reduced graphene oxide/fused silica (rGO/FS) composites using 3-aminopropyltriethoxysilane as surfactant is reported. GO nanosheets were bound to FS particles by an electrostatic assembly between ultra thin negatively charged GO sheets and positively charged amino-modified FS particles. After spark plasma sintering, rGO/FS bulk composites have been produced from the GO and FS composite particles with GO being reduced to rGO in vacuum at high temperatures. Results show that rGO sheets were well dispersed in the matrix, and conductivity of these rGO/FS composites at room temperature was strongly dependent on the rGO nanosheet concentration. i.e., the conductivity of rGO/FS was increased to 10⁻⁴ S/cm when a conducting network was formed inside the composites. The effect of GO nanosheets on the mechanical properties of rGO/FS bulk composites was also investigated. The addition of 1 wt.% GO sheets to FS resulted in 72% increase in Vickers hardness, indicating the stress transfering from the FS matrix to the rigid rGO sheets. With the same rGO content, the fracture toughness of the as-prepared composites was increased by 74%. The main toughening mechanisms were thought to be crack deflection, crack branching, pulling-out and bridging of the rGO sheets.     

Preparation and electrochemical properties of polyaniline/reduced graphene oxide composites

Polyaniline (PANI)/reduced graphene oxide (rGO) composites were synthesized by in situ oxidative polymerization of aniline on reduced graphene sheets. Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, transmission electron microscopy, and scanning electron microscopy were used to characterize the composites. The results indicated PANI/rGO composites were produced and contained covalent bonds between the functional groups of PANI and rGO. A uniform coating of PANI on the rGO sheets had a synergistic effect on the properties of the composites. The electrochemical properties of the PANI/rGO composites produced using different feed ratios of aniline to rGO were studied. The results showed that the composites exhibited a maximum specific capacitance of 797.5 F/g at 0.5 A/g and minimum charge transfer resistance of 0.98 Ω when the feed ratio of aniline to rGO was 2:1. These values were superior to those of pure PANI and rGO. The composites also displayed excellent cycling stability, with specific capacitance retention of 92.43% after 1000 cycles. These stable structural composites show promise for the development of new supercapacitor applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46103.     

Preparation of on chip,flexible supercapacitor with high performance based on electrophoretic deposition of reduced graphene oxide/polypyrrole composites

A new concept is introduced to fabricate flexible, on-chip supercapacitors by electrophoretically depositing highly dispersed reduced graphene oxide/polypyrrole on interdigital-like electrodes. By the unique method, the deposited films could construct on the substrate facilely and uniformly. The prepared all-solid-state device demonstrates high volumetric capacitance (about 147.9 F cm⁻³), high energy density (13.15 mWh cm⁻³ at a power density of 1300 mW cm⁻³) and excellent cycling stability (approximately 71.7% of the initial capacitance retained after 5000 cycles). Compared with other supercapacitor, the device demonstrated here is lightweight, flexible and inexpensive.     

Fabrication of manganese oxide/three-dimensional reduced graphene oxide composites as the supercapacitors by a reverse microemulsion method

Manganese oxide (MnO₂)/three-dimensional (3D) reduced graphene oxide (RGO) composites were prepared by a reverse microemulsion (water/oil) method. MnO₂ nanoparticles (3–20 nm in diameter) with different morphologies were produced and dispersed homogeneously on the macropore surfaces of the 3D RGO. Scanning electron microscopy and transmission electron microscopy were applied to characterize the microstructure of the composites. The MnO₂/3D RGO composites, which were annealed at 150 °C, displayed a significantly high specific capacitance of 709.8 F g⁻¹ at 0.2 A g⁻¹. After 1000 cycles, the capacitance retention was measured to be 97.6%, which indicates an excellent long-term stability of the MnO₂/3D RGO composites.     

Nitrogen-doped reduced graphene oxide/Fe2O3 hybrid as efficient catalyst for ammonium nitrate

In this investigation, we successfully synthesized a hybrid material, N-rGO@Fe₂O₃, via a one-step hydrothermal process, comprising nitrogen-doped reduced graphene oxide and α-Fe₂O₃. Thorough characterization using diverse analytical methods validated its structure. Employing this hybrid composite as a catalyst, we studied its efficacy in the catalytic thermal decomposition of ammonium nitrate (AN). The N-rGO@Fe₂O₃/AN composite was prepared using a recurrent spray coating method with 3 % mass of the hybrid material. Thermo-gravimetric (TG) and differential scanning calorimetric (DSC) analyses were employed to investigate the catalytic effect. Computational assessment of Arrhenius parameters was conducted through isoconversional kinetic approaches. Results from the kinetic analysis allowed the determination of the critical ignition temperature. Furthermore, calorific values for pure AN and N-rGO@Fe₂O₃/AN were measured using an oxygen calorimetric bombe, revealing a 41 % reduction in activation energy barrier and a lowering of the critical ignition temperature from 292 °C to 283 °C upon incorporation of the hybrid material. Notably, the surface modification of AN with N-rGO@Fe₂O₃ resulted in an increase of 1440 J/g in the observed calorific values. These findings highlight the potential of N-rGO@Fe₂O₃ as an effective catalyst, offering promising implications for applications in enhancing ammonium nitrate thermal decomposition.     

Structural evolution of multi-walled carbon nanotube/MnO2 composites as supercapacitor electrodes

Multi-walled carbon nanotube (MWCNT)/MnO₂ supercapacitor electrodes containing MnO₂ nanoflakes in the MWCNT network are fabricated through the oxidation of manganese acetate with poly(4-styrenesulfonic acid) (PSS) dispersed MWCNTs. The structural evolution of the electrodes under charge/discharge (reduction/oxidation) cycles and its impact on the electrodes’ electrochemical properties are evaluated. Structural evolution involves the dissolution of MnO₂ upon reduction, the diffusion of the reduced Mn species from the MWCNT network toward the electrolyte solution, and the deposition of MnO₂ on the electrode surface upon oxidation. Electrode structural changes, including the electrode dissolution and the growth of the MnO₂ crystals, are scan rate dependent and have deteriorating effect on the electrode's electrochemical properties including the specific capacitance and cyclic stability.     

Interfacial shear strength of reduced graphene oxide polymer composites

Interfacial shear strength (IFSS) between particle and matrix in particulate polymer composites is a critical property in determining the mechanical behaviors since it is directly related to not only their Young’s modulus or specific strength, but also energy absorbing capability. However, the conventional techniques often present a technical challenge to accurately measure the IFSS between fillers and matrix in the composites. This is more apparent in graphene particulate composites due to their nano-scale dimensions as well as the platelet-shaped geometry. Here, the focus of this study is to use a semi-empirical approach to determine the IFSS of graphene particulate composites by combining experiments with finite element (FE) modeling. The materials of interest are reduced graphene oxide (RGO) and polycarbonate (PC). The tensile testing was performed to characterize the mechanical properties, while simultaneously monitoring the acoustic emission events in order to measure the global debonding stress (GDS) in the composites. By coupling thermal stress analysis and deformation analysis with the GDS as input to a FE model, the IFSS of the RGO particulate PC composites was successfully estimated by about 136 MPa, avoiding unnecessary assumptions and uncertainties which are seem to be inevitable with the conventional techniques for the IFSS measurement.     

Synthesis of polypyrrole-reduced graphene oxide composites by in-situ photopolymerization and its application as a supercapacitor electrode

A highly conductive polypyrrole (PPy)-reduced graphene oxide (RGO) composite with an electrical conductivity of 610 S m⁻¹ was successfully synthesized by the in-situ photopolymerization of pyrrole in a graphene oxide suspension. Graphene oxide (GO) played the role of an electron acceptor and was reduced as it accepted electrons. The reduction of GO was confirmed by the increase in the C/O ratio of RGO with the UV irradiation time as well as the high electrical conductivity of PPy-RGO composite. Through the thermogravimetric analysis, it has been found that the PPy-RGO composite exhibited high thermal stability compared to the GO and PPy. This material was used as an electrode in a supercapacitor cell and showed excellent performance for electrical energy storage. The composite exhibited a specific capacitance of 376 F g⁻¹ at a scan rate of 25 mV s⁻¹.