Cocatalyst‐Free Photocatalysts for Efficient Visible‐Light‐Induced H2 Production: Porous Assemblies of CdS Quantum Dots and Layered Titanate Nanosheets

Highly efficient, visible‐light‐induced H₂ generation can be achieved without the help of a Pt cocatalyst by new hybrid photocatalysts, in which CdS quantum dots (QDs) (particle size ≈2.5 nm) are incorporated in the porous assembly of sub‐nanometer‐thick layered titanate nanosheets. Due to the very‐limited crystal dimension of component semiconductors, the electronic structure of CdS QDs is strongly coupled with that of the layered titanate nanosheets, leading to an efficient electron transfer between them and the enhancement of the CdS photostability. As a consequence of the promoted electron transfer, the photoluminescence of CdS QDs is nearly quenched after hybridization, indicating the almost‐suppression of electron‐hole recombination. These Pt‐cocatalyst‐free, CdS‐layered titanate nanohybrids show much‐higher photocatalytic activity for H₂ production than the precursor CdS QDs and layered titanate, which is due to the increased lifetime of the electrons and holes, the decrease of the bandgap energy, and the expansion of the surface area upon hybridization. The observed photocatalytic efficiency of these Pt‐free hybrids (≈1.0 mmol g^?1 h^?1) is much greater than reported values of other Pt‐free CdS‐TiO₂ systems. This finding highlights the validity of 2D semiconductor nanosheets as effective building blocks for exploring efficient visible‐light‐active photocatalysts for H₂ production.     

Nitrogen‐Doped Nanoporous Carbon/Graphene Nano‐Sandwiches: Synthesis and Application for Efficient Oxygen Reduction

A zeolitic‐imidazolate‐framework (ZIF) nanocrystal layer‐protected carbonization route is developed to prepare N‐doped nanoporous carbon/graphene nano‐sandwiches. The ZIF/graphene oxide/ZIF sandwich‐like structure with ultrasmall ZIF nanocrystals (i.e., ≈20 nm) fully covering the graphene oxide (GO) is prepared via a homogenous nucleation followed by a uniform deposition and confined growth process. The uniform coating of ZIF nanocrystals on the GO layer can effectively inhibit the agglomeration of GO during high‐temperature treatment (800 °C). After carbonization and acid etching, N‐doped nanoporous carbon/graphene nanosheets are formed, with a high specific surface area (1170 m² g^?1). These N‐doped nanoporous carbon/graphene nanosheets are used as the nonprecious metal electrocatalysts for oxygen reduction and exhibit a high onset potential (0.92 V vs reversible hydrogen electrode; RHE) and a large limiting current density (5.2 mA cm^?2 at 0.60 V). To further increase the oxygen reduction performance, nanoporous Co‐N_x/carbon nanosheets are also prepared by using cobalt nitrate and zinc nitrate as cometal sources, which reveal higher onset potential (0.96 V) than both commercial Pt/C (0.94 V) and N‐doped nanoporous carbon/graphene nanosheets. Such nanoporous Co‐N_x/carbon nanosheets also exhibit good performance such as high activity, stability, and methanol tolerance in acidic media.     

Phthalocyanine‐Based 2D Conjugated Metal‐Organic Framework Nanosheets for High‐Performance Micro‐Supercapacitors

2D conjugated metal‐organic frameworks (2D c‐MOFs) are emerging as a novel class of conductive redox‐active materials for electrochemical energy storage. However, developing 2D c‐MOFs as flexible thin‐film electrodes have been largely limited, due to the lack of capability of solution‐processing and integration into nanodevices arising from the rigid powder samples by solvothermal synthesis. Here, the synthesis of phthalocyanine‐based 2D c‐MOF (Ni₂[CuPc(NH)₈]) nanosheets through ball milling mechanical exfoliation method are reported. The nanosheets feature with average lateral size of ≈160 nm and mean thickness of ≈7 nm (≈10 layers), and exhibit high crystallinity and chemical stability as well as a p‐type semiconducting behavior with mobility of ≈1.5 cm² V^?1 s^?1 at room temperature. Benefiting from the ultrathin feature, the nanosheets allow high utilization of active sites and facile solution‐processability. Thus, micro‐supercapacitor (MSC) devices are fabricated mixing Ni₂[CuPc(NH)₈] nanosheets with exfoliated graphene, which display outstanding cycling stability and a high areal capacitance up to 18.9 mF cm^?2; the performance surpasses most of the reported conducting polymers‐based and 2D materials‐based MSCs.     

Graphene‐Like Carbon Nitride Nanosheets for Improved Photocatalytic Activities

“Graphitic” (g)‐C₃N₄ with a layered structure has the potential of forming graphene‐like nanosheets with unusual physicochemical properties due to weak van der Waals forces between layers. Herein is shown that g‐C₃N₄ nanosheets with a thickness of around 2 nm can be easily obtained by a simple top‐down strategy, namely, thermal oxidation etching of bulk g‐C₃N₄ in air. Compared to the bulk g‐C₃N₄, the highly anisotropic 2D‐nanosheets possess a high specific surface area of 306 m² g^?1, a larger bandgap (by 0.2 eV), improved electron transport ability along the in‐plane direction, and increased lifetime of photoexcited charge carriers because of the quantum confinement effect. As a consequence, the photocatalytic activities of g‐C₃N₄ nanosheets have been remarkably improved in terms of ?OH radical generation and photocatalytic hydrogen evolution.     

Fabrication of Ultrathin 2D Cu‐BDC Nanosheets and the Derived Integrated MOF Nanocomposites

Freestanding 2D nanosheets with many unprecedented properties have been used in a myriad of applications. In this work, 2D copper‐bearing metal‐organic frameworks (MOFs; viz., Cu‐BDC) nanosheets are successfully fabricated via a facile and benign methodology through using Cu₂O nanocubes (≈60 nm) as a confined metal ion source and 1,4‐benzenedicarboxylic acid (H₂BDC) as an organic linker. The Cu₂O nanocubes gradually release Cu⁺ ions which are further oxidized by the dissolved oxygen and serve as nutrients for construction of 2D frameworks. In contrast, the conventional solvothermal synthesis with copper salt exclusively yields bulk Cu‐BDC with edge dimensions of 2–10 µm. Interestingly, the as‐prepared Cu‐BDC nanosheets show ultrathin thickness, oriented growth, and excellent crystallinity, which can be exploited as a platform for the design of a series of 2D‐integrated nanocatalysts by loading various metal nanocrystals such as Au, Ag, Pt, and Ru, with 3‐mercaptopropionic acid as molecular link. In addition, it is found that Cu‐BDC/M composites with highly accessible active sites on the surface exhibit high catalytic activity in several condensation reactions between benzaldehyde and primary amines. The findings offer an alternative strategy for rational design and synthesis of 2D MOF nanosheets and the derived 2D nanocomposites for catalytic applications.     

Few‐Layer MoSe2 Nanosheets with Expanded (002) Planes Confined in Hollow Carbon Nanospheres for Ultrahigh‐Performance Na‐Ion Batteries

Sodium‐ion batteries (SIBs) are considered as a promising alternative to lithium‐ion batteries, due to the abundant reserves and low price of Na sources. To date, the development of anode materials for SIBs is still confronted with many serious problems. In this work, encapsulation‐type structured MoSe₂@hollow carbon nanosphere (HCNS) materials assembled with expanded (002) planes few‐layer MoSe₂ nanosheets confined in HCNS are successfully synthesized through a facile strategy. Notably, the interlayer spacing of the (002) planes is expanded to 1.02 nm, which is larger than the intrinsic value of pristine MoSe₂ (0.64 nm). Furthermore, the few‐layer nanosheets are space‐confined in the inner cavity of the HCNS, forming hybrid MoSe₂@HCNS structures. When evaluated as anode materials for SIBs, it shows excellent rate capabilities, ultralong cycling life with exceptional Coulombic efficiency even at high current density, maintaining 501 and 471 mA h g^?1 over 1000 cycles at 1 and 3 A g^?1, respectively. Even when cycled at current densities as high as 10 A g^?1, a capacity retention of 382 mA h g^?1 can be achieved. The expanded (002) planes, 2D few‐layer nanosheets, and unique carbon shell structure are responsible for the ultralong cycling and high rate performance.     

Optically Sintered 2D RuO2 Nanosheets: Temperature‐Controlled NO2 Reaction

2D Ru oxide nanosheets (NSs) with optically punched nanoholes are synthesized and integrated on a flexible heating substrate, i.e., silver nanowire (Ag NW)‐embedded colorless polyimide (cPI) film, for application in wearable chemical sensors. Multiple discrete pores on the sub‐5‐nm scale are formed on the basal planes of Ru oxide NSs by irradiation of intense pulsed light. The chemical sensing characteristic of the porous Ru oxide NSs toward nitrogen dioxide (NO₂) is investigated under controlled temperatures by applying DC voltage to the Ag NW‐embedded cPI film. The improved NO₂ responding and recovery kinetics are achieved using the porous Ru oxide NSs with sensitivity of 1.124% at 20 ppm at a film temperature of 80.3 °C. A wireless patch‐type sensor module is developed to demonstrate wearable sensing of NO₂ using the Ru oxide NSs on Ag NW‐embedded cPI heating film. This work paved the new way for application of atomically thin and porous Ru oxide NSs in chemical sensors, which can detect hazardous species in real time.     

Monomolecular‐Layer Ba5Ta4O15 Nanosheets: Synthesis and Investigation of Photocatalytic Properties

Monomolecular‐layer perovskite Ba₅Ta₄O₁₅ nanosheets with hexagonal structure have been synthesized by a hydrothermal method. The thickness of the nanosheets is about 1.1 nm, which corresponds to a monolayer of Ba₅Ta₄O₁₅ molecules, with the lateral size ranging from 50 to 200 nm. The optimal conditions for the formation of the nanosheets are maintaining the reactants above 270 °C for 24 h. A dissolution–recrystallization mechanism is suggested based on observations of the factors that influence nanosheet formation, such as reaction time, temperature, and basicity. Formation of Ba₅Ta₄O₁₅ nanosheets takes precedence over other nanostructures under high concentrations of OH^– because the hindering effect of OH^– ions on the c‐axis growth is strong. Thus, the extended growth rate of polyhedrons on one monolayer is much faster than the superposition rate of the monolayer, and the crystal grows more easily along the a‐ and b‐planes. The Ba₅Ta₄O₁₅ nanosheets show a high photocatalytic activity in the degradation of Rhodamine B and gaseous formaldehyde. The layered perovskite probably affects the photocatalytic activity by promoting the charge separation and delocalization of photogenerated electrons and holes.     

3D Hexagonal (R‐3m) Mesostructured Nanocrystalline Titania Thin Films: Synthesis and Characterization

A straightforward and reproducible synthesis of crack‐free large‐area thin films of 3D hexagonal (R‐3m) mesostructured nanocrystalline titania (meso‐nc‐TiO₂) using a Pluronic triblock copolymer (P123)/1‐butanol templating system is described. The characterization of the films is achieved using a combination of electron microscopy (high‐resolution scanning electron microscopy and scanning transmission electron microscopy), grazing‐incidence small‐angle X‐ray scattering, in situ high‐temperature X‐ray diffraction, and variable‐angle spectroscopic ellipsometry. The mesostructure of the obtained films is found to be based upon a 3D periodic array of large elliptically shaped cages with diameters around 20 nm interconnected by windows of about 5 nm in size. The mesopores of the film calcined at 300 °C are very highly ordered, and the titania framework of the film has a crystallinity of 40 % being composed of 5.8 nm sized anatase crystallites. The film displays high thermal stability in that the collapse of the pore architecture is incomplete even at 600 °C. The accessible surface area of 3D hexagonal meso‐nc‐TiO₂ estimated by the absorption of methylene blue is nearly twice as large as that of 2D hexagonal meso‐nc‐TiO₂ at the same annealing temperature.     

Lithium Tin Sulfide—a High‐Refractive‐Index 2D Material for Humidity‐Responsive Photonic Crystals

Extending the portfolio of novel stimuli‐responsive, high‐refractive‐index (RI) materials besides titania is key to improve the optical quality and sensing performance of existing photonic devices. Herein, lithium tin sulfide (LTS) nanosheets are introduced as a novel solution processable ultrahigh RI material (n = 2.50), which can be casted into homogeneous thin films using wet‐chemical deposition methods. Owing to its 2D morphology, thin films of LTS nanosheets are able to swell in response to changes of relative humidity. Integration of LTS nanosheets into Bragg stacks (BSs) based on TiO₂, SiO₂, nanoparticles or H₃Sb₃P₂O₁₄ nanosheets affords multilayer systems with high optical quality at an extremely low device thickness of below 1 µm. Owing to the ultrahigh RI of LTS nanosheets and the high transparency of the thin films, BSs based on porous titania as the low‐RI material are realized for the first time, showing potential application in light‐managing devices. Moreover, the highest RI contrast ever realized in BSs based on SiO₂ and LTS nanosheets is reported. Finally, exceptional swelling capability of an all‐nanosheet BS based on LTS and H₃Sb₃P₂O₁₄ nanosheets is demonstrated, which bodes well for a new generation of humidity sensors with extremely high sensitivity.     

Controlled Polarizability of One‐Nanometer‐Thick Oxide Nanosheets for Tailored,High‐κ Nanodielectrics

An important challenge in current microelectronics research is the development of techniques for making smaller, higher‐performance electronic components. In this context, the fabrication and integration of ultrathin high‐κ dielectrics with good insulating properties is an important issue. Here, we report on a rational approach to produce high‐performance nanodielectrics using one‐nanometer‐thick oxide nanosheets as a building block. In titano niobate nanosheets (TiNbO₅, Ti₂NbO₇, Ti₅NbO₁₄), the octahedral distortion inherent to site‐engineering by Nb incorporation results in a giant molecular polarizability, and their multilayer nanofilms exhibit a high dielectric constant (160–320), the largest value seen so far in high‐κ nanofilms with thickness down to 10 nm. Furthermore, these superior high‐κ properties are fairly temperature‐independent with low leakage‐current density (<10^?7 A cm^?2). This work may provide a new recipe for designing nanodielectrics desirable for practical high‐κ devices.     

High‐Performance Ultraviolet Photodetector Based on a Few‐Layered 2D NiPS3 Nanosheet

2D materials, represented by transition metal dichalcogenides (TMDs), have attracted tremendous research interests in photoelectronic and electronic devices. However, for their relatively small bandgap (<2 eV), the application of traditional TMDs into solar‐blind ultraviolet (UV) photodetection is restricted. Here, for the first time, NiPS₃ nanosheets are grown via chemical vapor deposition method. The nanosheets thinning to 3.2 nm with the lateral size of dozens of micrometers are acquired. Based on the various nanosheets, a linearity is found between the Raman intensity of specific A_g modes and the thickness, providing a convenient method to determine their layer numbers. Furthermore, a UV photodetector is fabricated using few‐layered 2D NiPS₃ nanosheets. It shows an ultrafast rise time shorter than 5 ms with an ultralow dark current less than 10 fA. Notably, this UV photodetector demonstrates a high detectivity of 1.22 × 10¹² Jones, outperforming some traditional wide‐bandgap UV detectors. The wavelength‐dependent photoresponsivity measurement allows the direct observation of an admirable cut‐off wavelength at 360 nm, which indicates a superior spectral selectivity. The promising photodetector performance, accompanied with the controllable fabrication and transfer process of nanosheet, lays the foundation of applying 2D semiconductors for ultrafast UV light detection.     

Mass Production of High‐Quality Transition Metal Dichalcogenides Nanosheets via a Molten Salt Method

2D transition metal dichalcogenides (TMDs) are well suited for energy storage and field–effect transistors because of their thickness‐dependent chemical and physical properties. However, as current synthetic methods for 2D TMDs cannot integrate both advantages of liquid‐phase syntheses (i.e., massive production and homogeneity) and chemical vapor deposition (i.e., high quality and large lateral size), it still remains a great challenge for mass production of high‐quality 2D TMDs. Here, a molten salt method to massively synthesize various high‐crystalline TMDs nanosheets (MoS₂, WS₂, MoSe₂, and WSe₂) with the thicknesses less than 5 nm is reported, with the production yield over 68% with the reaction time of only several minutes. Additionally, the thickness and size of the as‐synthesized nanosheets can be readily controlled through adjusting reaction time and temperature. The as‐synthesized MoSe₂ nanosheets exhibit good electrochemical performance as pseudocapacitive materials. It is further anticipates that this work will provide a promising strategy for rapid mass production of high‐quality nonoxides nanosheets for energy‐related applications and beyond.     

Bright Blue and White Electrophosphorescent Triarylboryl‐Functionalized C^N‐Chelate Pt(II) Compounds: Impact of Intramolecular Hydrogen Bonds and Ancillary Ligands

New blue and blue‐green phosphorescent C^N chelate Pt(II) compounds that contain a dimesitylboryl‐functionalized phenyl‐1,2,3‐triazole ligand (Bptrz) are synthesized. The influence of three different ancillary ligands, namely acetylacetonato (acac), picolinate (pic) and pyridyl‐1,2,4‐triazolyl (pytrz), on phosphorescence quantum efficiency and excimer emission is examined. Pt(II) compounds with a p‐Bptrz ligand consistently emit a blue‐green color with an emission wavelength = 490–500 nm while those with a m‐Bptrz ligand emit a blue color with λ_em = 450–460 nm and a quantum efficiency as high as 0.97. In addition to the blue monomer emission peak, Pt(m‐Bptrz)(pytrz) compounds display an excimer emission peak at ～550 nm in a solid matrix whose intensity is dependent on the substituent group on pytrz and the doping concentration. As a result of the monomer and excimer emission, bright white phosphorescence is observed for several members of Pt(m‐Bptrz)(pytrz) compounds. Intramolecular CH···N hydrogen bonds are found to play an important role in the high stability and high phosphorescent quantum efficiency of Pt(m‐Bptrz)(pytrz) compounds. Single‐dopant blue and white electrophosphorescent devices using Pt(m‐Bptrz)(CF₃‐pytrz‐Me) or Pt(m‐Bptrz)(t‐Bu‐pytrz‐Me) as the emitter are successfully fabricated. White electroluminesence devices with external quantum efficiency of 15.6% and CIE (xy) of 0.31, 0.44 are achieved.     

Semisacrificial Template Growth of Self‐Supporting MOF Nanocomposite Electrode for Efficient Electrocatalytic Water Oxidation

Herein, the authors report, for the first time, the semisacrificial template growth of a self‐supporting metal–organic framework (MOF) nanocomposite electrode composed of ultrasmall iron‐rich Fe(Ni)‐MOF cluster‐decorated ultrathin Ni‐rich Ni(Fe)‐MOF nanosheets from the NiFe alloy foam, in which the Fe(Ni)‐MOF clusters are uniform with a particle size of 2–5 nm, while the thickness of the Ni(Fe)‐MOF nanosheets is only about 1.56 nm. When directly used as a self‐supported working electrode for the oxygen evolution reaction (OER), it can afford an impressive electrocatalytic performance with required overpotentials of 227 and 253 mV to achieve current densities of 10 and 100 mA cm^?2, respectively, much outperforming the benchmark of RuO₂ and most state‐of‐the‐art noble‐metal‐free catalysts. Characterizations demonstrated that the combination of the unique nanostructure of the catalyst and the strong coupling effect between Ni and Fe active sites should be responsible for its excellent OER performance. Remarkably, when coupled with a Pt electrode in an overall water splitting system, they only needed 1.537 V to achieve a current density of 10 mA cm^?2. The facile and economical methodology represents a new way to design and prepare high‐performance self‐supporting MOF electrocatalysts for highly efficient electrochemical processes.     

Performances of Liquid‐Exfoliated Transition Metal Dichalcogenides as Hole Injection Layers in Organic Light‐Emitting Diodes

2D transition metal dichalcogenide (TMD) nanosheets, including MoS₂, WS₂, and TaS₂, are used as hole injection layers (HILs) in organic light‐emitting diodes (OLEDs). MoS₂, WS₂, and TaS₂ nanosheets are prepared using an exfoliation by ultrasonication method. The thicknesses and sizes of the TMD nanosheets are measured to be 3.1–4.3 nm and more than 100 nm, respectively. The work functions of the TMD nanosheets increase from 4.4–4.9 to 4.9–5.1 eV following ultraviolet/ozone (UVO) treatment. The turn‐on voltages at 10 cd m^?2 for UVO‐treated TMD‐based devices decrease from 7.3–12.8 to 4.3–4.4 V and maximum luminance efficiencies increase from 5.74–9.04 to 12.01–12.66 cd A^?1. In addition, this study confirms that the stabilities of the devices in air can be prolonged by using UVO‐treated TMDs as HILs in OLEDs. These results demonstrate the great potential of liquid‐exfoliated TMD nanosheets for use as HILs in OLEDs.     

Heterostructured Nanocube‐Shaped Binary Sulfide (SnCo)S2 Interlaced with S‐Doped Graphene as a High‐Performance Anode for Advanced Na+ Batteries

Heterostructuring electrodes with multiple electroactive and inactive supporting components to simultaneously satisfy electrochemical and structural requirements has recently been identified as a viable pathway to achieve high‐capacity and durable sodium‐ion batteries (SIBs). Here, a new design of heterostructured SIB anode is reported consisting of double metal‐sulfide (SnCo)S₂ nanocubes interlaced with 2D sulfur‐doped graphene (SG) nanosheets. The heterostructured (SnCo)S₂/SG nanocubes exhibit an excellent rate capability (469 mAh g^?1 at 10.0 A g^?1) and durability (5000 cycles, 487 mAh g^?1 at 5.0 A g^?1, 92.6% capacity retention). In situ X‐ray diffraction reveals that the (SnCo)S₂/SG anode undergoes a six‐stage Na⁺ storage mechanism of combined intercalation, conversion, and alloying reactions. The first‐principle density functional theory calculations suggest high concentration of p–n heterojunctions at SnS₂/CoS₂ interfaces responsible for the high rate performance, while in situ transmission electron microscopy unveils that the interlacing and elastic SG nanosheets play a key role in extending the cycle life.     

Ice‐Assisted Synthesis of Black Phosphorus Nanosheets as a Metal‐Free Photocatalyst: 2D/2D Heterostructure for Broadband H2 Evolution

A 2D/2D heterojunction of black phosphorous (BP)/graphitic carbon nitride (g‐C₃N₄) is designed and synthesized for photocatalytic H₂ evolution. The ice‐assisted exfoliation method developed herein for preparing BP nanosheets from bulk BP, leads to high yield of few‐layer BP nanosheets (≈6 layers on average) with large lateral size at reduced duration and power for liquid exfoliation. The combination of BP with g‐C₃N₄ protects BP from oxidation and contributes to enhanced activity both under λ > 420 nm and λ > 475 nm light irradiation and to long‐term stability. The H₂ production rate of BP/g‐C₃N₄ (384.17 µmol g^?1 h^?1) is comparable to, and even surpasses that of the previously reported, precious metal‐loaded photocatalyst under λ > 420 nm light. The efficient charge transfer between BP and g‐C₃N₄ (likely due to formed N? P bonds) and broadened photon absorption (supported both experimentally and theoretically) contribute to the excellent photocatalytic performance. The possible mechanisms of H₂ evolution under various forms of light irradiation is unveiled. This work presents a novel, facile method to prepare 2D nanomaterials and provides a successful paradigm for the design of metal‐free photocatalysts with improved charge‐carrier dynamics for renewable energy conversion.     

Structurally Ordered Low‐Pt Intermetallic Electrocatalysts toward Durably High Oxygen Reduction Reaction Activity

Carbon‐supported low‐Pt ordered intermetallic nanoparticulate catalysts (PtM₃, M = Fe, Co, and Ni) are explored in order to enhance the oxygen reduction reaction (ORR) activity while achieving a high stability compared to previously reported Pt‐richer ordered intermetallics (Pt₃M and PtM) and low‐Pt disordered alloy catalysts. Upon high‐temperature thermal annealing, ordered PtCo₃ intermetallic nanoparticles are successfully prepared with minimum particle sintering. In contrast, the PtFe₃ catalyst, despite the formation of ordered structure, suffers from obvious particle sintering and detrimental metal–support interaction, while the PtNi₃ catalyst shows no structural ordering transition at all but significant particle sintering. The ordered PtCo₃ catalyst exhibits durably thin Pt shells with a uniform thickness below 0.6 nm (corresponding to 2–3 Pt atomic layers) and a high Co content inside the nanoparticles after 10 000 potential cycling, leading to a durably compressive Pt surface and thereby both high activity (fivefold vs a commercial Pt catalyst and 1.7‐fold vs an ordered PtCo intermetallic catalyst) and high durability (5 mV loss in half‐wave potential and 9% drop in mass activity). These results provide a new strategy toward highly active and durable ORR electrocatalysts by rational development of low‐Pt ordered intermetallics.     

Large‐Size,Porous, Ultrathin NiCoP Nanosheets for Efficient Electro/Photocatalytic Water Splitting

Porous ultrathin 2D catalysts are attracting great attention in the field of electro/photocatalytic hydrogen evolution reaction (HER) and overall water splitting. Herein, a universal pH‐controlled wet‐chemical strategy is reported followed by thermal and phosphorization treatment to prepare large‐size, porous and ultrathin bimetallic phosphide (NiCoP) nanosheets, in which graphene oxide is adopted as a template to determine the size of products. The thickness of the resultant NiCoP nanosheets ranges from 3.5 to 12.8 nm via delicately adjusting pH from 7.8 to 8.5. The thickness‐dependent electrocatalytic performance is evidenced experimentally and explained by computational studies. The prepared large‐size ultrathin NiCoP nanosheets show excellent bifunctional electrocatalytic activity for overall water splitting, with low overpotentials of 34.3 mV for HER and 245.0 mV for oxygen evolution reaction, respectively, at 10 mA cm^?2. Furthermore, the NiCoP nanosheets exhibit superior photocatalytic HER performance, achieving a high HER rate of 238.2 mmol h^?1 g^?1 in combination with commonly used photocatalyst CdS, which is far superior to that of Pt/CdS (81.7 mmol h^?1 g^?1). All these results demonstrate large‐size porous ultrathin NiCoP nanosheets as an efficient and multifunctional electro/photocatalyst for water splitting.