NiCo2O4 nanosheets and nanocones as additive-free anodes for high-performance Li-ion batteries

Development of novel electrode materials with high energy and power densities for lithium-ion batteries (LIBs) is the key to meet the demands of electric vehicles. Transition metal oxides that can react with large amounts of Li⁺ for electrochemical energy storage are considered promising anode materials for LIBs. In this work, NiCo₂O₄ nanosheets and nanocones on Ni foam have been synthesized via general hydrothermal growth and low-temperature annealing treatment. They exhibit high rate capacities and good cyclic performance as LIB anodes owing to their architecture design, which reduces ion and electron transport distance, expands the electrode–electrolyte contact, increases the structural stability, and buffers volume change during cycles. Notably, NiCo₂O₄ nanosheets deliver an initial capacity of 2239 mAh g⁻¹ and a rate capacity of 964 mAh g⁻¹ at current densities of 100 and 5000 mA g⁻¹, respectively. The corresponding values of nanocones are 1912 and 714 mAh g⁻¹. Hence, the as-synthesized NiCo₂O₄ nanosheets and nanocones, which are carbon-free and binder-free with higher energy densities and stronger connections between active materials and current collectors for better stability, are promising for use in advanced anodes for high-performance LIBs.     

Rational design of nickel cobalt sulfide/oxide core-shell nanocolumn arrays for high-performance flexible all-solid-state asymmetric supercapacitors

The development of wearable electronics has created a surge of interest in designing flexible energy storage device with high energy density and long lifespan. In this work, we have successfully fabricated a flexible asymmetric supercapacitor (ASC) based on the NiCo₂S₄@NiCo₂O₄ nanocolumn arrays (NCAs). The nickel cobalt sulfide/oxide core-shell nanostructures were rationally synthesized through a facile stepwise approach. The NiCo₂S₄@NiCo₂O₄ NCAs based electrode delivered a high specific capacitance of 2258.9 F g⁻¹ at a current density of 0.5 A g⁻¹. The as-assembled flexible ASC device exhibited a high energy density of 44.06 Wh kg⁻¹, a high power density of 6.4 kW kg⁻¹, and excellent cycling stability by retaining 92.5% after 6000 cycles. Excitingly, the electrochemical property of the ASC device could be maintained under severe bending, indicating superior flexibility and mechanical stability. The NiCo₂S₄@NiCo₂O₄ core-shell NCAs possess enormous potential for future wearable electronic applications.     

Effect of graphene nanosheets on electrochemical performance of Li4Ti5O12 in lithium-ion capacitors

In order to improve the electrochemical performance of lithium titanium oxide, Li₄Ti₅O₁₂ (LTO), for the use in the lithium-ion capacitors (LICs) application, LTO/graphene composites were synthesized through a solid state reaction. The composite exhibited an interwoven structure with LTO particles dispersed into graphene nanosheets network rather than an agglomerated state pristine LTO particles. It was found that there is an optimum percentage of graphene additives for the formation of pure LTO phase during the solid state synthesis of LTO/graphene composite. The effect of graphene nanosheets addition on electrochemical performance of LTO was investigated by a systemic characterization of galvanostatic cycling in lithium and lithium-ion cell configuration. The optimized composite exhibited a decreased polarization upon cycling and delivered a specific capacity of 173 mA h g⁻¹ at 0.1 C and a well maintained capacity of 65 mA h g⁻¹ even at 20 C. The energy density of 14 Wh kg⁻¹ at a power density of 2700 W kg⁻¹ was exhibited by a LIC full cell with a balanced mass ratio of anode to cathode along with a superior capacitance retention of 97% after 3000 cycles at a current density of 0.4 A g⁻¹. This boost in reversible capacity, rate capability and cycling performance was attributed to a synergistic effect of graphene nanosheets, which provided a short lithium ion diffusion path as well as facile electron conduction channels.     

Improved activity of a graphene–TiO2 hybrid electrode in an electrochemical supercapacitor

We present a simple and fast approach for the synthesis of a graphene–TiO₂ hybrid nanostructure using a microwave-assisted technique. The microstructure, composition, and morphology were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, Raman microscopy, X-ray photoelectron spectroscopy, and field-emission scanning electron microscopy. The electrochemical properties were evaluated using cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge–discharge tests. Structural analysis revealed a homogeneous distribution of nanosized TiO₂ particles on graphene nanosheets. The material exhibited a high specific capacitance of 165 F g⁻¹ at a scan rate of 5 mV s⁻¹ in 1 M Na₂SO₄ electrolyte solution. Theenhanced supercapacitance property of these materials could be ascribed to the increased conductivity of TiO₂ and better utilization of graphene. Moreover, the material exhibited long-term cycle stability, retaining ∼90% specific capacitance after 5000 cycles, which suggests that it has potential as an electrode material for high-performance electrochemical supercapacitors.     

Amaryllis-like NiCo2S4 nanoflowers for high-performance flexible carbon-fiber-based solid-state supercapacitor

Low-cost dynamic materials for Faradaic redox reactions are needed for high-energy storage supercapacitors. A simple and cost-effective hydrothermal process was employed to synthesize amaryllis-like NiCo₂S₄ nanoflowers. The sample was characterized by X-ray powder diffraction, Brunauer–Emmett–Teller method, scanning electron microscopy, and transmission electron microscopy. NiCo₂S₄ nanoflowers were coated onto carbon fiber fabric and used as a binder-free electrode to fabricate a solid-state supercapacitor compact device. The solid-state supercapacitor exhibited excellent electrochemical performance, including high specific capacitance of 360 F g⁻¹ at scan rate of 5 mV s⁻¹ and high energy density of 25 W h kg⁻¹ at power density of 168 W kg⁻¹. In addition, the supercapacitor possessed high flexibility and good stability by retaining 90% capacitance after 5000 cycles. The high conductivity and Faradic-redox activity of NiCo₂S₄ nanoflowers resulted in high specific energy and power. Thus, NiCo₂S₄ nanoflowers are promising pseudocapacitive materials for low-cost and lightweight solid-state supercapacitors.     

Nb2O5 nanospheres/surface-modified graphene composites as superior anode materials in lithium ion batteries

Uniform Nb₂O₅ nanospheres/surface-modified graphene (SMG) composites for anode materials in lithium ion batteries were synthesized by hydrothermal method. The microstructure and morphology of composites were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscope techniques. The experimental results showed that Nb₂O₅ nanospheres were tightly and uniformly grown on the surface of SMG nanosheets. Nb₂O₅ nanospheres/SMG composites exhibited an impressive reversible capacity of 404.6 mA h g⁻¹ at the current density of 40 mA g⁻¹ after 100 cycles, and an excellent rate capacity of 345.5 mA h g⁻¹ at the current density of 400 mA g⁻¹.     

Structural,magnetic, and textural properties of iron oxide-reduced graphene oxide hybrids and their use for the electrochemical detection of chromium

Superparamagnetic Fe₃O₄ nanoparticles were anchored on reduced graphene oxide (RGO) nanosheets by co-precipitation of iron salts in the presence of different amounts of graphene oxide (GO). A pH dependent zeta potential and good aqueous dispersions were observed for the three hybrids of Fe₃O₄ and RGO. The structure, morphology and microstructure of the hybrids were examined by X-ray diffraction, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy, Raman and X-ray photoelectron spectroscopy. TEM images reveal lattice fringes (d₃₁₁ = 0.26 nm) of Fe₃O₄ nanoparticles with clear stacked layers of RGO nanosheets. The textural properties including the pore size distribution and loading of Fe₃O₄ nanoparticles to form Fe₃O₄–RGO hybrids have been controlled by changing the concentration of GO. An observed maximum (～10 nm) in pore size distribution for the sample with 0.25 mg ml^?1 of GO is different from that prepared using 1.0 mg ml^?1 GO. The superparamagnetic behavior is also lost in the latter and it exhibits a ferrimagnetic nature. The electrochemical behavior of the hybrids towards chromium ion was assessed and a novel electrode system using cyclic voltammetry for the preparation of an electrochemical sensor platform is proposed. The textural properties seem to influence the electrochemical and magnetic behavior of the hybrids.     

Ni@NiCo2O4 core/shells composite as electrode material for supercapacitor

A novel Ni@NiCo₂O₄ core/shells structure consisting of the Ni microspheres skeletons and nanosheet-like NiCo₂O₄ skins was designed and investigated as the electrochemical electrode for supercapacitor. Due to the unique architecture with Ni microspheres as the highly conductive cores improving the electrical conductivity of electrode and external nanosheet-like NiCo₂O₄ shells as the efficient electrochemical active materials facilitating the contact between the electrode and electrolyte, the as-prepared Ni@NiCo₂O₄ exhibited excellent electrochemical performance with high specific capacity of 597 F g⁻¹ (1 A g⁻¹) as well as remarkable capacitance retention of 96% (3000 cycles). These impressive results pave the way to design high-performance electrode materials for energy storage.     

Easy synthesis of porous graphene nanosheets and their use in supercapacitors

We report the easy synthesis of porous graphene nanosheets (PGNs) using the etching of graphene sheets by MnO₂. An electrode made from PGNs exhibits a specific capacitance of 154 F g^?1 at 500 mV s^?1 in 6 M KOH compared to a value of 67 F g^?1 for graphene nanosheets, and a low capacitance loss of 12% after 5000 cycles. Interestingly, PGN electrode material shows an excellent rate capability due to its open layered and mesopore structures that facilitate the efficient access of electrolytes to the electrode material and shorten the ion diffusion pathway through the porous sheets. This approach offers the potential for cost-effective, environmentally friendly and large-scale production of PGNs.     

Three-dimensional graphene layers prepared by a gas-foaming method for supercapacitor applications

Inspired by baking bread, our research group demonstrates a novel method for baking three-dimensional (3D) graphene layers with an open porous network, pore size in the range of dozens of nanometers to several hundred nanometers, and a pore wall thickness of about 10 nm. Such continuously cross-linking structures not only effectively overcome the restacking and agglomeration of graphene nanosheets but also possess more channels between nanosheets to lower the resistance for electron access to the inter-space. Compared with reduced graphene oxide (rGO) prepared at the same temperature, the unique 3D porous-structured graphene layers also contain 4.3 at.% nitrogen. When the 3D graphene layers are employed as an active electrode material for a supercapacitor, a high specific capacitance (SC) of 231.2 F g⁻¹ at 1 A g⁻¹ is displayed after electrochemical activation, approximately two times that of rGO. Only <1.0% of the capacitance degrades after 8000 cycles, exhibiting its excellent cycle stability; furthermore, it liberates a high energy density of 32.1 Wh kg⁻¹ at a power density of 500 W kg⁻¹. The attractive performances of 3D graphene layers make them a promising candidate as an electrode material for supercapacitors.     

Hollow graphene spheres self-assembled from graphene oxide sheets by a one-step hydrothermal process

We developed a one-step hydrothermal method to assemble graphene oxide (GO) sheets into hollow graphene spheres (HGSs), using only a GO/H₂SO₄ aqueous suspension as the starting material. Scanning electron microscope, focused ion beam scanning electron microscope and transmission electron microscope images show that the as-prepared HGSs vary from 1 to 3 μm in diameter and have a hollow interior structure. The as-prepared HGSs show a high capacitance of 207 F g⁻¹, as well as good rate capability and cycling stability when used as electrode materials for supercapacitors.     

Fabrication of manganese oxide/three-dimensional reduced graphene oxide composites as the supercapacitors by a reverse microemulsion method

Manganese oxide (MnO₂)/three-dimensional (3D) reduced graphene oxide (RGO) composites were prepared by a reverse microemulsion (water/oil) method. MnO₂ nanoparticles (3–20 nm in diameter) with different morphologies were produced and dispersed homogeneously on the macropore surfaces of the 3D RGO. Scanning electron microscopy and transmission electron microscopy were applied to characterize the microstructure of the composites. The MnO₂/3D RGO composites, which were annealed at 150 °C, displayed a significantly high specific capacitance of 709.8 F g⁻¹ at 0.2 A g⁻¹. After 1000 cycles, the capacitance retention was measured to be 97.6%, which indicates an excellent long-term stability of the MnO₂/3D RGO composites.     

Reduced graphene oxide anchored with δ-MnO2 nanoscrolls as anode materials for enhanced Li-ion storage

We developed a one-pot in situ synthesis procedure to form nanocomposite of reduced graphene oxide (RGO) sheets anchored with 1D δ-MnO₂ nanoscrolls for Li-ion batteries. The as-prepared products were characterized by X-ray diffraction (XRD), Raman spectra, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The electrochemical performance of the δ-MnO₂ nanoscrolls/RGO composite was measured by galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy. The results show that the δ-MnO₂ nanoscrolls/RGO composite displays superior Li-ion battery performance with large reversible capacity and high rate capability. The first discharge and charge capacities are 1520 and 810 mAh g⁻¹, respectively. After 50 cycles, the reversible discharge capacity is still maintained at 528 mAh g⁻¹ at the current density of 100 mAh g⁻¹. The excellent electrochemical performance is attributed to the unique nanostructure of the δ-MnO₂ nanoscrolls/RGO composite, the high capacity of MnO₂ and superior electrical conductivity of RGO.     

A green strategy for the synthesis of graphene supported Mn3O4 nanocomposites from graphitized coal and their supercapacitor application

A by-product free strategy based on modified Hummers method was proposed to synthesize graphene/Mn₃O₄ composites without any additional manganese source. Coal-derived graphite (CDG) was used as carbon source instead of conventional natural graphite flakes and MnSO₄ produced from the modified Hummers was in situ transformed into Mn₃O₄ by precipitation in air. After reduction with hydrazine, the reduced coal-derived graphene oxide/Mn₃O₄ (RCDGO/Mn₃O₄) was obtained and employed as the electrode material for the supercapacitors. In addition, K₂SO₄ produced from the modified Hummers was used as electrolyte, as a result, residual-free was achieved during the whole process, and the atom utilization was calculated as high as about 97%. A maximum specific capacitance of 260 F g⁻¹ was achieved for RCDGO/Mn₃O₄ composite with 86% Mn₃O₄ in saturated K₂SO₄ electrolyte solution based on the synergetic effects between coal-derived graphene and attached Mn₃O₄ nanoparticles. Its specific energy density reached 8.7 Wh kg⁻¹ at a current density of 50 mA g⁻¹ when used as a symmetrical supercapacitor. The good capacitance retention (92–94%) was also observed after 1000 continuous cycles of galvanostatic charge–discharge.     

Monolithic Fe2O3/graphene hybrid for highly efficient lithium storage and arsenic removal

We fabricated a monolithic Fe₂O₃/graphene hybrid directly by hydrothermal reaction of ferrous oxalate dihydrate and graphene oxide without using a reducing agent. The reduced graphene oxide formed an interconnected network structure that can be used as a support for homogeneous distribution of active Fe₂O₃ nanoparticles. The graphene network and the pore channels in the hybrid facilitate fast electron transfer and ion transport. This hybrid can be directly used as a free-standing anode for lithium ion batteries, which simplifies the fabrication procedure of electrodes, and also exhibited a high capacity of 1062 mA h g⁻¹ at 100 mA g⁻¹, high rate capability and excellent cyclic stability over 100 cycles. Furthermore, as a self-supported adsorbent, it provides a new idea on loading active materials to the suitable substrate, which can be used as a promising material for water purification due to its easy collection and excellent capability in removing As(V) from water. The results demonstrate the promising applications of bulk reduced assembly of graphene with functional metal oxides, which will be helpful for future development of graphene-based multifunctional materials.     

The effect of reduction time on the surface functional groups and supercapacitive performance of graphene nanosheets

Graphene nanosheets were prepared by reducing graphite oxide with hydrazine hydrate. The effects of reduction time on the structure and morphology of graphene nanosheets have been investigated. Their electrochemical performance in aqueous and organic electrolytes was also analyzed. With an increase of reduction time, the C and N contents of graphene nanosheets increased, while the specific surface areas and the specific capacitances decreased. Changes in reduction time produced a significant effect on the numbers as well as the types of oxygen and nitrogen functionalities. The graphene nanosheets, prepared by using a reduction time of 30 min have the highest specific capacitance of 192 F g^?1 in a 6 mol L^?1 KOH electrolyte. All prepared graphene nanosheets have a good rate performance and cycle stability.     

Synthesis of Mn3O4/N-doped graphene hybrid and its improved electrochemical performance for lithium-ion batteries

Mn₃O₄/N-doped graphene (Mn₃O₄/NG) hybrids were synthesized by a simple one-pot hydrothermal process. The scanning electron microscopy (SEM), transition electron microscopy (TEM), X-ray powder diffraction (XRD), Thermogravimetric analysis (TG), Raman Spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to characterize the microstructure, crystallinity and compositions. It is demonstrated that Mn₃O₄ nanoparticles are high-dispersely anchored onto the individual graphene nanosheets, and also found that, in contrast with pure Mn₃O₄ obtained without graphene added, the introduction of graphene effectively restricts the growth of Mn₃O₄ nanoparticles. Simultaneously, the anchored well-dispersed Mn₃O₄ nanoparticles also play a role as spacers in preventing the restacking of graphene sheets and producing abundant nanoscale porous channels. Hence, it is well anticipated that the accessibility and reactivity of electrolyte molecules with Mn₃O₄/NG electrode are highly improved during the electrochemical process. As the anode material for lithium ion batteries, the Mn₃O₄/NG hybrid electrode displays an outstanding reversible capacity of 1208.4 mAh g⁻¹ after 150 cycles at a current density of 88 mA g⁻¹, even still retained 284 mAh g⁻¹ at a high current density of 4400 mA g⁻¹ after 10 cycles, indicating the superior capacity retention, which is better than those of bare Mn₃O₄, and most other Mn₃O₄/C hybrids in reported literatures. Finally, the superior performance can be ascribed to the uniformly distribution of ultrafine Mn₃O₄ nanoparticles, successful nitrogen doping of graphene and favorable structures of the composites.     

Hydrazine hydrate-induced hydrothermal synthesis of MnFe2O4 nanoparticles dispersed on graphene as high-performance anode material for lithium ion batteries

Herein, a MnFe₂O₄/graphene (MnFe₂O₄/G) nanocomposite has been synthesized via a facile N₂H₄·H₂O-induced hydrothermal method. During the synthesis, N₂H₄·H₂O is employed to not only reduce graphene oxide to graphene, but also prevent the oxidation of Mn²⁺ in alkaline aqueous solution, thus ensuring the formation of MnFe₂O₄/G. Moreover, MnFe₂O₄ nanoparticles (5–20 nm) are uniformly anchored on graphene. MnFe₂O₄/G electrode delivers a large reversible capacity of 768 mA h g⁻¹ at 1 A g⁻¹ after 200 cycles and high rate capability of 517 mA h g⁻¹ at 5 A g⁻¹. MnFe₂O₄/G holds great promise as anode material in practical applications due to the outstanding electrochemical performance combined with the facile synthesis strategy.     

Design and synthesis of three-dimensional needle-like CoNi2S4/CNT/graphene nanocomposite with improved electrochemical properties

In this paper, we described a simple two–step method for preparing needle-like CoNi₂S₄/CNT/graphene nanocomposite with robust connection among its ternary components. The prepared CoNi₂S₄/CNT/graphene nanocomposite has been thoroughly characterized by spectroscopic (Fourier-transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy), X-ray diffraction and thermogravimetric analysis. Microscopy techniques (scanning electron microscopy–energy dispersive spectroscopy and transmission electron microscopy) were employed to probe the morphological structures. The electrochemical properties of the as-prepared 3D architectures were investigated with three and two-electrode systems. In addition to its high specific capacitance (710 F g⁻¹ at 20 A g⁻¹), after charging–discharging for 2000 cycles, the electrode still maintained the capacity retention of about 82%. When used as the active electrode material for supercapacitors, the fabricated CoNi₂S₄–g–CNT nanostructure exhibited excellent specific capacitance and good rate capability, making it a promising candidate for next-generation supercapacitors.     

One-step solvothermal synthesis of spherical spinel type NiFe2−xMnxO4-RGO as high-performance supercapacitor electrodes

A facile route for the synthesis of spinel type NiFe_2−xMn_xO₄-RGO as supercapacitor electrodes is reported and the microstructure, elemental composition/content, morphology and thermal stability of NiFe_1.7Mn_0.3O₄-RGO₁₀ were characterized by XRD, FTIR, ICP, XPS, TEM, and TGA. Uniform NiFe_1.7Mn_0.3O₄ nanospheres were deposited densely on the reduced graphene oxide (RGO) sheets. The as prepared NiFe_1.7Mn_0.3O₄-RGO₁₀ composite showed better electrochemical performance than the corresponding binary metal systems. The spinel structure and the doping of Mn as the third component provided the composite with high specific capacitance of 1214.7 F g⁻¹ at 0.5 A g⁻¹ in a three-electrode system along with good cycling stability.