Effect of engine parameters and type of gaseous fuel on the performance of dual-fuel gas diesel engines—A critical review

Petroleum resources are finite and, therefore, search for their alternative non-petroleum fuels for internal combustion engines is continuing all over the world. Moreover gases emitted by petroleum fuel driven vehicles have an adverse effect on the environment and human health. There is universal acceptance of the need to reduce such emissions. Towards this, scientists have proposed various solutions for diesel engines, one of which is the use of gaseous fuels as a supplement for liquid diesel fuel. These engines, which use conventional diesel fuel and gaseous fuel, are referred to as ‘dual-fuel engines’. Natural gas and bio-derived gas appear more attractive alternative fuels for dual-fuel engines in view of their friendly environmental nature. In the gas-fumigated dual-fuel engine, the primary fuel is mixed outside the cylinder before it is inducted into the cylinder. A pilot quantity of liquid fuel is injected towards the end of the compression stroke to initiate combustion. When considering a gaseous fuel for use in existing diesel engines, a number of issues which include, the effects of engine operating and design parameters, and type of gaseous fuel, on the performance of the dual-fuel engines, are important. This paper reviews the research on above issues carried out by various scientists in different diesel engines. This paper touches upon performance, combustion and emission characteristics of dual-fuel engines which use natural gas, biogas, producer gas, methane, liquefied petroleum gas, propane, etc. as gaseous fuel. It reveals that ‘dual-fuel concept’ is a promising technique for controlling both NO_x and soot emissions even on existing diesel engine. But, HC, CO emissions and ‘bsfc’ are higher for part load gas diesel engine operations. Thermal efficiency of dual-fuel engines improve either with increased engine speed, or with advanced injection timings, or with increased amount of pilot fuel. The ignition characteristics of the gaseous fuels need more research for a long-term use in a dual-fuel engine. It is found that, the selection of engine operating and design parameters play a vital role in minimizing the performance divergences between an existing diesel engine and a ‘gas diesel engine’.     

Theoretical study of the effects of engine parameters on performance and emissions of a pilot ignited natural gas diesel engine

With the increasing concern regarding diesel vehicle emissions and the rising cost of the liquid diesel fuel as well, more conventional diesel engines internationally are pursuing the option of converting to use natural gas as a supplement for the conventional diesel fuel (dual fuel natural gas/diesel engines). The most common natural gas/diesel operating mode is referred to as the pilot ignited natural gas diesel engine (PINGDE) where most of the engine power output is provided by the gaseous fuel while a pilot amount of the liquid diesel fuel injected near the end of the compression stroke is used only as an ignition source of the gaseous fuel–air mixture. The specific engine operating mode, in comparison with conventional diesel fuel operation, suffers from low brake engine efficiency and high carbon monoxide (CO) emissions. In order to be examined the effect of increased air inlet temperature combined with increased pilot fuel quantity on performance and exhaust emissions of a PINGD engine, a theoretical investigation has been conducted by applying a comprehensive two-zone phenomenological model on a high-speed, pilot ignited, natural gas diesel engine located at the authors' laboratory. The main objectives of the present work are to record the variation of the relative impact each one of the above mentioned parameters has on performance and exhaust emissions and also to reveal the advantages and disadvantages each one of the proposed method. It becomes more necessary at high engine load conditions where the simultaneous increase of the specific engine parameters may lead to undesirable results with nitric oxide emissions.     

Combustion characteristics and performance of natural gas in high speed indirect injection diesel engine

In recent years, efforts have been directed towards environmentally freindly sources of alternative fuels for internal combustion engines. This paper investigates combustion characteristics and performance of natural gas in an unmodified compression ignition engine using diesel fuel pilot injection. The factors influencing knock limits in dual fuel gas engines have been identified. This report is confined to experimental work in a naturally aspirated dual gas engine and the results obtained were compared with the diesel fueled test engine. Cylinder pressure diagrams recorded indicate longer ignition delay and burning rates with an increased pressure variation.     

Use of hydrogen in dual-fuel diesel engines

Hydrogen is a promising future energy carrier due to its potential for production from renewable resources. It can be used in existing compression ignition diesel engines in a dual-fuel mode with little modification. Hydrogen's unique physiochemical properties, such as higher calorific value, flame speed, and diffusivity in air, can effectively improve the performance and combustion characteristics of diesel engines. As a carbon-free fuel, hydrogen can also mitigate harmful emissions from diesel engines, including carbon monoxide, unburned hydrocarbons, particulate matter, soot, and smoke. However, hydrogen-fueled diesel engines suffer from knocking combustion and higher nitrogen oxide emissions. This paper comprehensively reviews the effects of hydrogen or hydrogen-containing gaseous fuels (i.e., syngas and hydroxy gas) on the behavior of dual-fuel diesel engines. The opportunities and limitations of using hydrogen in diesel engines are discussed thoroughly. It is not possible for hydrogen to improve all the performance indicators and exhaust emissions of diesel engines simultaneously. However, reformulating pilot fuel by additives, blending hydrogen with other gaseous fuels, adjusting engine parameters, optimizing operating conditions, modifying engine structure, using hydroxy gas, and employing exhaust gas catalysts could pave the way for realizing safe, efficient, and economical hydrogen-fueled diesel engines. Future work should focus on preventing knocking combustion and nitrogen oxide emissions in hydrogen-fueled diesel engines by adjusting the hydrogen inclusion rate in real time.     

Effect of manifold injection of hydrogen gas in producer gas and neem biodiesel fueled CRDI dual fuel engine

The high flammability of hydrogen gas gives it a steady flow without throttling in engines while operating. Such engines also include different induction/injection methods. Hydrogen fuels are encouraging fuel for applications of diesel engines in dual fuel mode operation. Engines operating with dual fuel can replace pilot injection of liquid fuel with gaseous fuels, significantly being eco-friendly. Lower particulate matter (PM) and nitrogen oxides (NO_x) emissions are the significant advantages of operating with dual fuel.Consequently, fuels used in the present work are renewable and can generate power for different applications. Hydrogen being gaseous fuel acts as an alternative and shows fascinating use along with diesel to operate the engines with lower emissions. Such engines can also be operated either by injection or induction on compression of gaseous fuels for combustion by initiating with the pilot amount of biodiesel. Present work highlights the experimental investigation conducted on dual fuel mode operation of diesel engine using Neem Oil Methyl Ester (NeOME) and producer gas with enriched hydrogen gas combination. Experiments were performed at four different manifold hydrogen gas injection timings of TDC, 5°aTDC, 10°aTDC and 15°aTDC and three injection durations of 30°CA, 60°CA, and 90°CA. Compared to baseline operation, improvement in engine performance was evaluated in combustion and its emission characteristics. Current experimental investigations revealed that the 10°aTDC hydrogen manifold injection with 60°CA injection duration showed better performance. The BTE of diesel + PG and NeOME + PG operation was found to be 28% and 23%, respectively, and the emissions level were reduced to 25.4%, 14.6%, 54.6%, and 26.8% for CO, HC, smoke, and NO_x, respectively.     

Combustion performance and emission reduction characteristics of automotive DME engine system

This article is a condensed overview of a dimethyl ether (DME) fuel application for a compression ignition diesel engine. In this review article, the spray, atomization, combustion and exhaust emissions characteristics from a DME-fueled engine are described, as well as the fundamental fuel properties including the vapor pressure, kinematic viscosity, cetane number, and the bulk modulus. DME fuel exists as gas phase at atmospheric state and it must be pressurized to supply the liquid DME to fuel injection system. In addition, DME-fueled engine needs the modification of fuel supply and injection system because the low viscosity of DME caused the leakage. Different fuel properties such as low density, viscosity and higher vapor pressure compared to diesel fuel induced the shorter spray tip penetration, wider cone angle, and smaller droplet size than diesel fuel. The ignition of DME fuel in combustion chamber starts in advance compared to diesel or biodiesel fueled compression ignition engine due to higher cetane number than diesel and biodiesel fuels. In addition, DME combustion is soot-free since it has no carbon–carbon bonds, and has lower HC and CO emissions than that of diesel combustion. The NO_x emission from DME-fueled combustion can be reduced by the application of EGR (exhaust gas recirculation). This article also describes various technologies to reduce NO_x emission from DME-fueled engines, such as the multiple injection strategy and premixed combustion. Finally, the development trends of DME-fueled vehicle are described with various experimental results and discussion for fuel properties, spray atomization characteristics, combustion performance, and exhaust emissions characteristics of DME fuel.     

Analysis of ignition delay period of a dual fuel diesel engine with hydrogen and LPG as secondary fuels

In this study, experiments were performed on 4 cylinder turbocharged, intercooled with 62.5 kW gen-set diesel engine by using hydrogen, liquefied petroleum gas (LPG) and mixture of LPG and hydrogen as secondary fuels. The experiments were performed to measure ignition delay period at different load conditions and various diesel substitutions. The experimental results have been compared with ignition delay correlation laid down by other researchers for diesel and dual fuel diesel engine. It is found that ignition delay equation based on pressure, temperature and oxygen concentration for a dual fuel diesel engine run on diesel-biogas gives variation up to 6.56% and 14.6% from the present experimental results, while ignition delay equation for a pure diesel engine gives 7.55% and 33.3% variation at lower and higher gaseous fuel concentrations, respectively. It is observed that the ignition delay of dual fuel engine depends not only on the type of gaseous fuels and their concentrations but also on charge temperature, pressure and oxygen concentration.     

Performance and emission characteristics of CIE using hydrogen,biodiesel, and massive EGR

Hydrogen is considered as an excellent energy carrier and can be used in diesel engines that operate in dual fuel mode. Many studies have shown that biodiesel, which is sustainable, clean, and safe, a good alternative to fossil fuel. However, tests have confirmed that using biodiesel or hydrogen as a fuel or added fuel in compression ignition engines increases NOx concentrations. Cooled or hot exhaust gas recirculation (EGR) effectively controls the NOx outflows of diesel engines. However, this technique is restricted by high particulate matter PM emissions and the low thermal efficiency of diesel engines.In this study, gaseous hydrogen was added to the intake manifold of a diesel engine that uses biodiesel fuel as pilot fuel. The investigation was conducted under heavy-EGR conditions. An EGR system was modified to achieve the highest possible control on the EGR ratio and temperature. Hot EGR was recirculated directly from the engine exhaust to the intake manifold. A heat exchanger was utilized to maintain the temperature of the cooled EGR at 25 °C.The supplied hydrogen increased NOx concentrations in the exhaust gas emissions and high EGR rates reduced the brake thermal efficiency. The reduction in NOx emissions depended on the added hydrogen and the EGR ratios when compared with pure diesel combustion. Adding hydrogen to significant amounts of recycled exhaust gas reduced the CO, PM, and unburned hydrocarbon (HC) emissions significantly. Results showed that using hydrogen and biodiesel increases engine noise, which is reduced by adding high levels of EGR.     

Experimental investigation on biogas enrichment with hydrogen for improving the combustion in diesel engine operating under dual fuel mode

Biogas valorization as fuel for internal combustion engines is one of the alternative fuels, which could be an interesting way to cope the fossil fuel depletion and the current environmental degradation. In this circumstance, an experimental investigation is achieved on a single cylinder DI diesel engine running under dual fuel mode with a focus on the improvement of biogas/diesel fuel combustion by hydrogen enrichment. In the present investigation, the mixture of biogas, containing 70% CH₄ and 30% CO₂, is blended with the desired amount of H₂ (up to 10, 15 and 20% by volume) by using MTI 200 analytical instrument gas chromatograph, which flow thereafter towards the engine intake manifold and mix with the intake air. Depending on engine load conditions, the volumetric composition of the inducted gaseous fraction is 20–50% biogas, 2–10% H₂ and 45–78% air. Near the end of the compression stroke, a small amount of diesel pilot fuel is injected to initiate the combustion of the gas–air mixture. Firstly, the engine was tested on conventional diesel mode (baseline case) and then under dual fuel mode using the biogas. Consequently, hydrogen has partially enriched the biogas. Combustion characteristics, performance parameters and pollutant emissions were investigated in-depth and compared. The results have shown that biogas enriched with 20% H₂ leads to 20% decrease of methane content in the overall exhaust emissions, associated with an improvement in engine performance. The emission levels of unburned hydrocarbon (UHC) and carbon monoxide (CO) are decreased up to 25% and 30% respectively. When the equivalence ratio is increased, a supplement decrease in UHC and CO emissions is achieved up to 28% and 30% respectively when loading the engine at 60%.     

用扩散及准均质混合气压燃的组合燃烧降低柴油机碳烟与NOx排放的研究

在柴油机的一部分工况采用现有的扩散燃烧方式，另一部分工况采用柴油引燃醇燃料均质混合气的组合燃烧方式，利用醇燃料的高汽化潜热和含氧的特性，达到同时降低柴油机碳烟及氮氧化物(NOχ)的目的，并且避免在小负荷燃烧醇燃料带来的高醛类排放问题。在一台4缸水冷直喷式发动机上采用上述组合燃烧法进行试验，从发动机进气管处喷进乙醇形成均质混合气，然后由柴油引燃。由电控装置控制乙醇喷入量及其喷入时刻。试验结果表明，与原机相比，碳烟和NOχ排放分别减少了50％和30％，同时燃料的消耗率也有大幅度降低。     

Energy efficiency improvement strategies for a diesel engine in low‐temperature combustion

The lowered combustion temperature in diesel engines is capable of reducing nitrogen oxides and soot simultaneously, which can be implemented by the heavy use of exhaust gas recirculation (EGR) or the homogeneous charge compression ignition (HCCI) type of combustion. However, the fuel efficiency of the low‐temperature combustion (LTC) cycles is commonly compromised by the high levels of hydrocarbon and carbon monoxide emissions. More seriously, the scheduling of fuel delivery in HCCI engines has lesser leverage on the exact timing of auto‐ignition that may even occur before the compression stroke is completed, which may cause excessive efficiency reduction and combustion roughness. New LTC control strategies have been explored experimentally to achieve ultralow emissions under independently controlled EGR, intake boost, exhaust backpressure, and multi‐event fuel‐injection events. Empirical comparisons have been made between the fuel efficiencies of LTC and conventional diesel cycles. Preliminary adaptive control strategies based on cylinder pressure characteristics have been implemented to enable and stabilize the LTC when heavy EGR is applied. The impact of heat‐release phasing, duration, shaping, and splitting on the thermal efficiency has also been analyzed with engine cycle simulations. This research intends to identify the major parameters that affect diesel LTC engine thermal efficiency. Copyright © 2008 John Wiley & Sons, Ltd.     

Comprehensive study of biodiesel fuel for HSDI engines in conventional and low temperature combustion conditions

In this research, an experimental investigation has been performed to give insight into the potential of biodiesel as an alternative fuel for High Speed Direct Injection (HSDI) diesel engines. The scope of this work has been broadened by comparing the combustion characteristics of diesel and biodiesel fuels in a wide range of engine loads and EGR conditions, including the high EGR rates expected for future diesel engines operating in the low temperature combustion (LTC) regime.The experimental work has been carried out in a single-cylinder engine running alternatively with diesel and biodiesel fuels. Conventional diesel fuel and neat biodiesel have been compared in terms of their combustion performance through a new methodology designed for isolating the actual effects of each fuel on diesel combustion, aside from their intrinsic differences in chemical composition.The analysis of the results has been sequentially divided into two progressive and complementary steps. Initially, the overall combustion performance of each fuel has been critically evaluated based on a set of parameters used as tracers of the combustion quality, such as the combustion duration or the indicated efficiency. With the knowledge obtained from this previous overview, the analysis focuses on the detailed influence of biodiesel on the different diesel combustion stages known ignition delay, premixed combustion and mixing controlled combustion, considering also the impact on CO and UHC pollutant emissions.The results of this research explain why the biodiesel fuel accelerates the diesel combustion process in all engine loads and EGR rates, even in those corresponding with LTC conditions, increasing its possibilities as alternative fuel for future DI diesel engines.     

Experimental investigation of varying composition of HCNG on performance and combustion characteristics of a SI engine

With rapid depletion of petroleum resources, researchers are investigating alternate fuels to meet global transportation energy demand. Gaseous fuels such as compressed natural gas (CNG) and hydrogen are of special interest because of their cleaner combustion characteristics compared to liquid petroleum based fossil fuels. However both these gaseous fuels have some technical issues when they are used as stand-alone alternate fuel in conventional spark ignition (SI) engines. CNG suffers from lower energy density and narrow flammability range whereas backfiring tendency is highly pronounced in hydrogen fueled engines. Hydrogen enriched compressed natural gas (HCNG) mixtures are observed to be good alternative to these individual fuels since these mixtures do not pose the issues experienced by the constituent fuels i.e. CNG and hydrogen. In this study, experiments were conducted in a spark ignited gas engine using various compositions of HCNG mixtures having 0, 10, 20, 30, 50, 70 and 100% (v/v) hydrogen fraction. The performance and combustion characteristics of these test fuels were compared with that of baseline CNG, in order to find an optimum HCNG mixture composition for a single cylinder gas engine. Results obtained showed that 30HCNG mixture delivered superior engine performance compared to other HCNG mixtures and baseline CNG, which is in sharp contrast to 15HCNG being advocated globally.     

Experimental investigations of a four-stroke single cylinder direct injection diesel engine operated on dual fuel mode with producer gas as inducted fuel and Honge oil and its methyl ester (HOME) as injected fuels

In order to meet the energy requirements, there has been growing interest in alternative fuels like biodiesels, methyl alcohol, ethyl alcohol, biogas, hydrogen and producer gas to provide a suitable diesel oil substitute for internal combustion engines. Vegetable oils present a very promising alternative to diesel oil since they are renewable and have similar properties. Vegetable oils offer almost the same power output with slightly lower thermal efficiency when used in diesel engine [Srivastava A, Prasad R. Triglycerides-based diesel fuels. Renew Sustain Energy Rev 2000;4:111–33. [1]; Vellguth G. Performance of vegetable oils and their monoesters as fuels for diesel engines. SAE 831358, 1983. [2]; Demirbas A. Biodiesel production from vegetable oils via catalytic and non-catalytic supercritical methanol transesterification methods. Int J Prog Energy Combust Sci 2005;31:466–87. [3]; Jajoo BN, Keoti RS. Evaluation of vegetable oils as supplementary fuels for diesel engines. In: Proceedings of the XV national conference on IC engines and combustion, Anna University Chennai, 1997. [4]; Altin R, Cetinkaya S, Yucesu HS. The potential of using vegetable oil fuels as fuel for diesel engines. Int J Energy Convers Manage 2000;42:529–38, 248. [5]; Gajendra Babu MK, Chandan Kumar Das LM. Experimental investigations on a Karanja oil methyl ester fuelled DI diesel engine. SAE 2006-01-0238, 2006. [6]; Agarwal D, Kumar Agarwal A. Performance and emission characteristics of a Jatropha oil (preheated and blends) in a direct injection compression ignition engine. Int J Appl Therm Eng 2007;27:2314–23. [7]]. Research in this direction with edible oils have yielded encouraging results, but their use as fuel for diesel engine has limited applications due to higher domestic requirement [Scholl Kyle W, Sorenson Spencer C. Combustion Analysis of soyabean oil methyl ester in a direct injection diesel engine. SAE 930934, 1993. [8]; Nwafor OMI. Effect of advanced injection timing on the performance of rapeseed oil in diesel engines. Int J Renew Energy 2000;21:433–44. [9]; Nwafor OMI. The effect of elevated fuel inlet temperature on performance of diesel engine running on neat vegetable oil at constant speed conditions. Renew Energy 2003;28:171–81. [10]]. In view of this, Honge oil (Pongamia Pinnata Linn) being non-edible oil could be regarded as an alternative fuel for CI engine applications. The viscosity of Honge oil is reduced by transesterification process to obtain Honge oil methyl ester (HOME).Gasification is a process in which solid biomass is converted into a mixture of combustible gases, which complete their combustion in an IC engine. Hence, producer gas can act as a promising alternative fuel, especially for diesel engines by substituting considerable amount of diesel fuels. Downdraft moving bed gasifiers coupled with IC engine are a good choice for moderate quantities of available biomass, up to 500 kW of electric power. Hence, bioderived gas and vegetable liquids appear more attractive in view of their friendly environmental nature. Since vegetable oils produce higher smoke emissions, dual fuel operation could be adopted for improving their performance.     

A review of hydrogen as a compression ignition engine fuel

Diesel fuelled engines emit higher levels of carbon dioxide and other harmful air pollutants (such as noxious gases and particulates) per litre of fuel than gasoline engines. This fact, combined with the recent diesel emission scandal and the rumours of more widespread cheating by automotive manufacturers have initiated a long discussion about the future and sustainability of diesel engines.Improving the compression ignition engine is a direct way of going green. Reducing the harmful emissions can be achieved by future developments in the engine technology but also the implementation of alternative fuels. Hydrogen is a renewable, high-efficient and clean fuel that can potentially save the future of diesel-type engines. The evolution of high-efficiency renewable hydrogen production methods is the most important path for the start of a new hydrogen era for the compression ignition engine that can improve its sustainability and maximum efficiency.This paper provides a detailed overview of hydrogen as a fuel for compression ignition engines. A comprehensive review of the past and recent research activities on the topic is documented. The review focuses on the in-cylinder combustion of hydrogen either as a primary fuel or in dual fuel operation. The effects of injection strategies, compression ratio and exhaust gas recirculation on the combustion and emission characteristics of the hydrogen fuelled engine are fully analysed. The main limitations, challenges and perspectives are presented.     

双燃料发动机燃烧放热规律分析及燃烧特性研究

从热力学和内燃机燃烧的基本理论入手 ,推导了计算分析双燃料发动机缸内工质成分和热力学参数的计算关系式以及求解双燃料发动机燃烧放热规律的微分方程式 ,基于面向对象技术开发了双燃料发动机燃烧放热规律计算软件。研究结果表明 :用传统柴油机分析方法计算双燃料发动机的放热率峰值偏小 ,所计算的缸内工质平均温度偏高 ,新模型计算的结果与实际情况更为吻合。该分析软件可以适用于多种燃料发动机 ,是内燃机燃烧放热规律的通用计算软件。双燃料发动机燃烧特性研究表明 :双燃料发动机初始放热率比纯柴油大 ,若着火始点在上止点后 ,双燃料缸内最大爆发压力比纯柴油低 ,否则比纯柴油高 ;控制双燃料发动机着火始点是控制缸内最大爆发压力和 NOx 排放的关键 ,双燃料发动机着火始点应在上止点后 ,可以使发动机爆发压力和 NOx 排放比纯柴油低。     

Experimental investigation on NG dual fuel engine improvement by hydrogen enrichment

The crude oil graduate depletion, as well as aspects related to environmental pollution and global warming instigated many researches concerning alternative fuels. Natural gas (NG) is one of the most attractive available fuels. A promising technique for its use in internal combustion engines is the dual fuel concept. One of the main problems with this technique is that, at low loads, the engine efficiency decreases compared to conventional diesel. The unburned hydrocarbons and carbon monoxide emissions are also higher in dual fuel mode. An effective method to compensate the demerits of limited lean-burn ability and slow burning velocity of NG is to mix it with a fuel that possesses wide flammability limit and fast burning velocity. Hydrogen (H₂) is thought to be the best gaseous candidate for natural gas.In the present work, NG enrichment with various H₂ blends is investigated as a technique for improving dual fuel mode, especially at low loads. Impact on engine performance and emissions is experimentally examined. Total BSFC is considerably reduced. An important benefit in terms of BTE, reaching to increase a 12% with the 10%H₂ blend compared to the pure NG case, is also achieved. THC and CO emissions are in general reduced as a result of the improvement of gaseous fuel utilization. CO₂ emissions are also in general reduced. Even though a slight increase is in overall observed for NO_x emissions, it's almost insignificant.     

清洁燃料F-T柴油在柴油机中应用的研究

煤和含碳资源通过F—T合成可以获得十六烷值高、硫和芳香烃含量极低的F—T柴油。综述了F—T柴油的特性及其对排放的影响,并就F—T柴油和常规柴油在柴油机中的燃烧和排放特性进行了比较。与常规柴油相比：F-T柴油的滞燃期缩短了约14％～30％,预混燃烧放热峰值较低,最高燃烧压力略低,法规排放和非法规有毒排放都得到了大幅度降低,其中NOx和PM分别平均降低了13％和26％。因此,F-T柴油是一种优秀的清洁代用燃料。最后指出了F—T柴油在发动机中应用时在润滑性能、低温性能和与浸油弹性体兼容性等方面存在的问题,并探讨了解决途径。     

一种研究发动机燃烧过程的多功能可视化实验装置

介绍一种多功能可视化实验装置，本装置包括光学发动机、进气系统、光学系统、数据采集以及控制系统，利用本套装置可以实现对包括纯柴油、柴油/天然气双燃料，醇类燃料以及进气添加惰性气体等多种情况的发动机喷雾，着火以及燃烧特性进行可视化研究，同时本装置还可实现对燃烧过程的燃烧压力进行实时记录，给出全面的燃烧特性分析结果。     

The utilization of hydrogen in hydrogen/diesel dual fuel engine

A hydrogen fueled internal combustion engine has great advantages on exhaust emissions including carbon dioxide (CO₂) emission in comparison with a conventional engine fueling fossil fuel. In addition, if it is compared with a hydrogen fuel cell, the hydrogen engine has some advantages on price, power density, and required purity of hydrogen. Therefore, they expect that hydrogen will be utilized for several applications, especially for a combined heat and power (CHP) system which currently uses diesel or natural gas as a fuel.A final goal of this study is to develop combustion technologies of hydrogen in an internal combustion engine with high efficiency and clean emission. This study especially focuses on a diesel dual fuel (DDF) combustion technology. The DDF combustion technology uses two different fuels. One of them is diesel fuel, and the other one is hydrogen in this study. Because the DDF engine is not customized for hydrogen which has significant flammability, it is concerned that serious problems occur in the hydrogen DDF engine such as abnormal combustion, worse emission and thermal efficiency.In this study, a single cylinder diesel engine is used with gas injectors at an intake port to evaluate performance swung the hydrogen DDF engine with changing conditions of amount of hydrogen injected, engine speed, and engine loads. The engine experiments show that the hydrogen DDF operation could achieve higher thermal efficiency than a conventional diesel operation at relatively high engine load conditions. However, it is also shown that pre-ignition with relatively high input energy fraction of hydrogen occurred before diesel fuel injection and its ignition. Therefore, such abnormal combustion limited amount of hydrogen injected. Fire-deck temperature was measured to investigate causal relationship between fire-deck temperature and occurrence of pre-ignition with changing operative conditions of the hydrogen DDF engine.