Electropolymerization and characterization of terpyridinyl iron (II) and ruthenium (II) complexes

Electroactive 2,2′: 6,2″-terpyridinyl ligands ( 3, 5, 6 ) and their iron(II) ( 7a–9a ) and ruthenium(II) complexes ( 7b–9b ) were synthesized. Bis[3-(aminophenyl)-2,2′ :6,2″-terpyridinyl]metal(II) complexes ( 7a, 7b ) and bis[2-(hydroxyphenyl)-2,2′ :6,2″-terpyridinyl]metal(II) complexes ( 8a, 8b ) were electropolymerized on to the surface of Pt or In-SnO₂ (ITO) electrodes in acetonitrile containing Bu₄NCIO₄ by scanning the potential between O and + 1.6V (for 7a and 7b ), and ?0.8 and +1.6V (for 8a and 8b ) versus saturated calomel electrode. The electrodes obtained by electropolymerization exhibited reversible electrochromism based on Fe(II)/Fe(III) or Ru(II)/Ru(III) redox couple. Photoresponses to visible light were found in the modified electrode obtained by electropolymerization of ruthenium complex 7b in an aqueous LiClO₄ solution containing methylviologen (cation MV²⁺) under an O₂ atmosphere. The mechanism for the photoresponded cathodic current was explained in terms of an excitation of bis(terpyridinyl)ruthenium(II) complex [Ru(terpy)²₂⁺] by visible light, an electron transfer from the excited state [Ru(terpy)^2+*₂] to MV²⁺, reduction of Ru(terpy)³⁺₂ at an electrode, and oxidation of MV^+* with O₂.     

Synthesis and characterization of Cu(I) and Zn(II) complexes with new sulfur-bearing isoxazole- or pyrazole-based ligands

The synthesis of the new ligands 6-(5-methyl-1,2-oxazol-3-yl)-2,3-dihydro-5H-[1,4] dithiino[2,3-c]pyrrole-5,7(6H)-dione (isox′) and 6-(3-methyl-1H-pyrazol-5-yl)-2,3-dihydro-5H-[1,4]dithiino[2,3-c]pyrrole-5,7(6H)-dione (pyraz′) and their coordination chemistry toward Cu(I) and Zn(II), was studied. The ligands and their complexes were characterized using a combination of either multinuclear NMR (¹H and ¹³C{¹H}), HRMS, FTIR or Uv–Vis spectroscopy. The solid state structures of ligand isox′ and complexes [Cu(pyraz′)₂]OTf and [Zn(OOCCF₃)₂(pyraz′)₂] were determined. Interestingly, isox′ presents a yellow luminescence in its free form. Additionally, the ability of isox′ to coordinate as an N–O bidentate ligand or as an N–S bridge between two copper centers, forming a coordination polymer, is studied. The solid state structure of this Cu(I)-isox′ 1D coordination polymer is also reported.     

Cobalt(II) and nickel(II) complexes bearing mono(imino)pyridyl and bis(imino)pyridyl ligands: preparation,structure and ethylene polymerization/oligomerization behaviors

BACKGROUND: Ethylene oligomerization is the major industrial process to produce linear α‐olefins. Recently much work has been devoted to late transition metal catalysts used in this process, especially those with 2,6‐bis(imino)pyridyl dihalide ligands. Considering that most work has focused on simple modification to the substituents in imino‐aryl rings based on the symmetric bis(imino)pyridyl framework, here we expand this work to the asymmetric mono(imino)pyridyl ligands. RESULTS: The preparation, structure and ethylene polymerization/oligomerization behavior of series of mono(imino) pyridyl–MCl₂ and bis(imino)pyridyl–MX_n complexes are presented. The systematic studies were focused on the relationship between the catalytic behavior of these complexes for ethylene polymerization/oligomerization and reaction conditions, ligand structures, metal centers and counter‐anions. The influence of the coordination environment on catalyst behavior is also discussed. CONCLUSION: For mono(imino)pyridyl–Co(II) and ? Ni(II) catalysts bearing the Cl^? counter‐anion, good activities ranging from 0.513 × 10⁵ to 1.58 × 10⁵ g polyethylene (mol metal)^?1 h^?1 atm^?1 are afforded, and the most active catalysts are those with methyl in both ortho‐ and para‐positions of the imine N‐aryl ring. For bis(imino)pyridyl–Co(II) and ? Ni(II) catalysts bearing the SO₄^2? and NO₃^? counter‐anions, the low activities for ethylene oligomerization are in sharp contrast to those of their chloride analogues. Copyright © 2009 Society of Chemical Industry     

A new family of trinuclear Ru(II) polypyridyl complexes acting as pH-induced fluorescence switch

Tripodal ligands 1,3,5-tris{4-((1,10-phenanthroline-[5,6-d]imidazol-2-yl)phenoxy)methyl}-2,4,6-trimethylbenzene (L¹), 1,1,1-tris{4-((1,10-phenanthroline-[5,6-d]imidazol-2-yl)phenoxy)methyl}propane (L²), 2,2′,2′′-tris{4-((1,10-phenanthroline-[5,6-d]imidazol-2-yl)phenoxy)ethyl}amine (L³), and corresponding Ru(II) complexes [(bpy)₆L^1–3(Ru^II)₃](PF₆)₆, shortly called (Ru–L^1–3), have been synthesized. UV–vis absorption and fluorescence spectra of these complexes are both strongly dependent on the pH of the buffer solution. These complexes act as pH-induced off–on–off fluorescence switch through protonation and deprotonation of the imidazole-containing ligands.     

Copper(II) and nickel(II) complexes of pyridylamido hexadentate ligands: chemical speciation and spectroscopic studies

Two novel potentially hexadentate ligands, 1,10-(2-bis picolinamide)-4,7-diazadecane (pycdpnen) and 1,8-bis(2-picolinamide)-3,6-dioxaoctane (pycdado) have been synthesised as their hydrochloride salt; its protonation constants and the stability constants of the copper(II) and nickel(II) chelates have been determined by potentiometry. Amide groups deprotonation permits the formation of [MLH₋₁]⁺ species in all cases, while only pycdado gives [MLH₋₂] species. The solid complexes of copper and nickel with the neutral and the deprotonated ligands have been synthesised and characterised by IR, UV–Vis and ESR spectroscopy. The amidic groups are coordinated through the oxygen atoms in all solid complexes [ML](ClO₄)₂ (M=Cu²⁺ and Ni²⁺). The complexes obtained with the deprotonated forms of the ligands imply the coordination through the nitrogen atoms of the amidic groups.     

NMR-spektroskopische Untersuchungen zum Komplexbildungsverhalten von Hydrazonen des Thiocarbazinsäure-O-methylesters mit Zink(II)-Ionen

Complexes of Zn(II) with Schiff Bases of Hydrazine-O-methylcarbothionates – NMR-Spectroscopic Investigations Schiff bases of hydrazine-O-methylcarbothionates react as bi- or tridentate ligands with Zn(II) ions forming neutral metal complexes ( 1a-1g ). ¹H-, ¹³C- and ¹⁵N-NMR-spectra of these complexes show the existence of configurational isomers of the CN-double bond. Furthermore, depending on the ligands 4 different coordination patterns with the donor atoms N₂S₂, N₄, N₂O₂ and NOS are demonstrated.     

On the behavior of the carboxyphenylterpyridine(8-quinolinolate) thiocyanatoruthenium(II) complex as a new black dye in TiO2 solar cells modified with carboxymethyl-beta-cyclodextrin

A terpyridine ligand encompassing a terminal 4-carboxyphenyl group (cptpy), was employed in a new Ru(II) black dye, in the presence of 8-quinolinolate (Q) and SCN⁻ as ancillary ligands. Such compound, here referred as [Ru(cptpy) (Q) (NCS)], was designed aiming its inclusion into carboxymethyl-beta-cyclodextrin, anchored on TiO₂. This host–guest strategy was employed to prevent the formation of aggregates and protect the photoinjecting moiety against parallel deactivation events. Such expectation has indeed been fulfilled by the system. On the other hand, 8-quinolinolate as a strong electron donor ligand, effectively enhanced the light harvesting behavior of the dye, shifting and spreading the IPCE peaks over the entire visible region. Unfortunately, the red shift of visible charge-transfer bands was compensated by a decrease of the Ru(III)/(II) potentials, slowing down the electron transfer kinetics with the I₃/I⁻ redox mediator. Therefore, the observed counterbalance between charge transfer energies and redox potentials imposes a critical limit in the design of better mononuclear ruthenium-polypyridine dyes.     

Bio active mixed ligand complexes of Cu(II), Ni(II) and Zn(II): Synthesis,spectral, XRD,DNA binding and cleavage properties

The paper presents the synthesis of complex combinations of Cu(II), Zn(II) and Ni(II) with Schiff bases obtained by the condensation reaction of diphenylglyoxal with 1-amino-4-nitrobenzene (L¹)/1-amino-4-chlorobenzene (L²)/p-anisidine (L³) as the main ligand and 1,10-phenanthroline as the co-ligand respectively. The characterization of newly formed complexes has been done by spectral and molar conductivity studies. The bioefficacy of the ligands and their complexes have been examined against the growth of bacteria and fungi in vitro to evaluate their antimicrobial potential. The in vitro antibacterial and antifungal assay indicates that these complexes are good antimicrobial agents against various pathogens. X-ray powder diffraction illustrates that the complexes have crystalline nature. The effect of the metal complexes on DNA is carried out by pUC19 DNA agarose gel electrophoresis at 50 V for 2 h. The results indicate that the complexes bind to DNA through intercalation and act as efficient cleaving agents.     

New family of quadruply-bonded ditungsten(II,II) species with chloride and amine ligands

The first ditungsten(II,II) complexes with amine ligands of the formula W₂Cl₄(NH₂R)₄ (R=Prⁿ (1), Bu^t (2), Cy (3)) have been prepared by reduction of a tungsten(IV) compound with potassium graphite in the presence of the appropriate amine. The X-ray crystal structure determination of 3 revealed a quadruply-bonded ditungsten molecule having D_2d geometry and a trans arrangement of the amine ligands on each metal atom.     

Synthesis,characterization and antibacterial activity of Pd(II), Pt(II) and Ag(I) complexes of 4-ethyl and 4-(p-tolyl)-1-(pyridin-2-yl)thiosemicarbazides

Pd(II), Pt(II) and Ag(I) ions were found to form stable complexes with 4-(p-tolyl)- or 4-ethyl-1-(pyridin-2-yl)thiosemicarbazides (Hp-TPTS or HEPTS). The complex structure was elucidated by analysis (elemental and thermal), spectroscopy (electronic, IR and ¹H NMR spectra) and physical measurements (magnetic susceptibility and molar conductance). The ligands coordinate to the metal ions as monobasic bidentate through nitrogen and sulfur atoms. The electronic spectra of the Pt(II) complexes in DMF showed a metal to ligand charge transfer transition at 11,935–13,260 cm^?1. The structural, electronic and vibrational features of HEPTS and Hp?TPTS were discussed on the basis of semi-empirical quantum mechanic calculations [ZINDO/S and semi-empirical parameterization (PM3)]. The simulated IR and electronic spectra are found reasonable in accordance with the experimental data. Finally, the antibacterial activities of the ligands and their complexes were investigated and some were found promising.     

Preparation,photophysical, and electrochemical properties of three novel trinuclear Ru(II) polypyridyl complexes based on diazafluorenes

Three tripodal ligands 2,2′,2″-tris[(4,5-diazafluoren-9-ylimino)phenoxyethyl]amine (L¹), 1,3,5-tris[(4,5-diazafluoren-9-ylimino)phenoxymethyl]-2,4,6-trimethylbenzene (L²), 1,1′,1″-tris[(4,5-diazafluoren-9-ylimino)phenoxymethyl]-1″′-(p-tosyloxymethyl)-methane (L³), and corresponding Ru(II) complexes [(bpy)₆L^1–3(Ru^II)₃](PF₆)₆ (Ru-L^1–3) have been prepared. Cyclic voltammetry of the three complexes are consistent with one Ru(II)-centered quasi-reversible oxidation and three ligand-centered reductions. Photophysical behaviors are investigated by UV–Vis absorption and fluorescence spectrometry. The three complexes display metal-to-ligand charge transfer absorption at 445 nm and emission at 578 nm.     

Zeolite encapsulated Ru(III), Cu(II) and Zn(II) complexes as effective catalysts for the oxidation of ethylbenzene

Ru(III), Cu(II) and Zn(II) complexes of imidazole (ImzlH) have been synthesized in the supercages of zeolite-Y by flexible ligand method and characterized by spectroscopic (IR and UV?CVis) studies, XRD and thermogravimetric analysis, surface area, and pore volume measurements. These complexes were screened for their catalytic study towards the oxidation of ethylbenzene to a mixture of acetophenone, benzaldehyde and styrene using tert-butylhydroperoxide (TBHP) as an oxidant. A best-suited reaction condition has been optimized for these catalysts by varying the amount of the oxidant and catalyst, reaction time and volume of solvent for maximum transformation of ethylbenzene. Under the optimized reaction conditions, [Cu(ImzlH)]-Y gave 79.3% conversion after 1?h of reaction time. All these catalysts were more selective towards acetophenone formation. Among the prepared catalysts, zeolite encapsulated Cu(II) complex was found to be more active than the corresponding Ru(III) and Zn(II) complexes and all the complexes were stable enough to be reused. The catalytic activities of the neat complexes and metal exchanged zeolites were also compared with the zeolite encapsulated metal complexes.     

Design and syntheses of blue luminescent Cu(II) and Zn(II) polymeric complexes with 2-(2′-pyridyl)benzimidazole derivative ligand

The polymeric complexes of 4,4′-bis[2-(2′-pyridyl)benzimidazolyl]biphenyl (Bmbp) with Cu(II) (1), Zn(II) (2) and 1,3,5-tris[2-(2′-pyridyl)benzimidazolyl]benzene (Tmb) with Cu(II) (3), Zn(II) (4) were successfully synthesized and characterized by IR spectroscopy, elemental analysis, thermal analysis and conductivity measurements. The results indicate that the stoichiometry of these metal complexes is metal: Bmbp (or Tmb) = 1:1 for 1 and 2 (2:1 for 3 and 4). Ligands coordinated with metal ions to get a five-membered chelate ring and formed polymeric complexes with metal ion. Their luminescence properties were also studied by UV–vis and fluorescence spectra. At room temperature, complexes 1–4 emit blue luminescence from 419 to 483 nm in the solid state and purple/blue luminescence from 385 to 437 nm in DMF solution. Thermal properties measurement and analysis shows that they have good thermal stabilities.     

Preparation,spectroscopic, and electrochemical properties of four novel trinuclear Ru(II) polypyridyl complexes containing diazafluorene

Four tripodal ligands 2,2′,2″-tris[4-(4,5-diazafluoren-9-ylhydrazinyl)methylenephenoxyethyl]amine (L¹), 1,1,1-tris[4-(4,5-diazafluoren-9-ylhydrazinyl)methylenephenoxymethyl]propane (L²), 1,3,5-tris[4-(4,5-diazafluoren-9-ylhydrazinyl)methylenephenoxymethyl]-2,4,6-trimethylbenzene (L³), 1,3,5-tris[4-(4,5-diazafluoren-9-ylhydrazinyl)methylenephenoxymethyl]benzene (L⁴), and corresponding Ru(II) complexes [(bpy)₆L^1–4(Ru^II)₃](PF₆)₆ (Ru-L^1–4) have been synthesized. Cyclic voltammetry of these complexes comprise one Ru(II)-centered reversible oxidation and three ligand-centered reductions. Photophysical behaviors are investigated by UV–Vis absorption and luminescence spectrometry. These complexes display metal-to-ligand charge transfer absorption at around 410 nm and emission at around 582 nm.     

Three hydrogen-bonded nanotubular zinc(II) complexes of N-(9-anthracenyl)-N′-(4-pyridyl)-urea

Three hydrogen-bonded nanotubular zinc(II) complexes of a monodentate ligand N-(9-anthracenyl)-N′-(4-pyridyl)urea (L), [Zn(OAc)₂L₂]?H₂O (1), [ZnBr(OAc)L₂]?H₂O (2) and [ZnCl(OAc)L₂]?4H₂O (3), were synthesized and structurally characterized. In the complexes, the central metal ion is tetrahedrally coordinated by the pyridyl nitrogen atoms of two ligands and different anions, while the urea groups of the ligands self-associate into the typical urea tape through R₂¹(6) hydrogen bonds, which are essential for the formation of the nanotubes. The fluorescence properties of ligand L and the complexes were studied in the solid state at room temperature.     

Synthesis,structure and catalytic activities for hydrogen transfer reaction of the carbonyl ruthenium(II) complex containing polypyridine and phosphine ligands

The synthesis and characterization of new ruthenium(II) carbonyl complexes containing polypyridine and triphenylphosphine ligands is reported. Crystallographic information obtained for the trans-PPh₃-[Ru(biq)(PPh₃)₂(CO)]Cl₂ complex (biq = 2,2’-biquinoline) reveals five-coordination on the metal. The complexes were studied as catalysts in hydrogen transfer reactions in basic solution. Turnover frequencies in the 2250-817 h^-1 range were determined in 1 hour of reaction with a substrate/catalysts ratio of 830.     

cis-Diaminedichloroplatinum(II) complexes reversibly bound to water-soluble polyaspartamide carriers for chemotherapeutic applications. II: Platinum coordination to ethylenediamine ligands attached to poly(ethylene oxide)-grafted carrier polymers

In continuation of previous investigations aiming at the development of macromolecular metal complexes for biomedical use, this communication describes poly(alkylene oxide)-grafted polymeric platinum complexes. The platinum-containing macromolecules are obtained from presynthesized polyaspartamide carriers bearing poly(ethylene/propylene oxide) side chains and hydroxyethyl side groups as hydrosolubilizing units in addition to ethylenediamine side group terminals for metal coordination. Platination is brought about by treatment of the carriers with tetrachloroplatinate(II) ion in aqueous solution at 25–60°C. pH 4–6. The polymeric products, purified by dialysis in aqueous solution, are isolated by freeze-drying in yields of 60–80%. Platinum contents are in the range of 4–15%. The metal is bound to the carrier through chelation with the ethylenediamine ligands, forming square-planarcis-dichloroethylenediamine-platinum(II) complex species as side-chain terminals. Initially, the product polymers dissolve smoothly in water. Although on room-temperature storage in the solid state they gradually turn insoluble as a consequence of intermolecular solid-state interaction, solubility is retained on low-temperature storage and in frozen aqueous solutions.     

Studies on Some Biologically Cobalt(II), Copper(II) and Zinc(II) Complexes With ONO, NNO and SNO Donor Pyrazinoylhydrazine-Derived Ligands

Biologically active complexes of Co(II), Ni(II), Cu(II) and Zn(II) with novel ONO, NNO and SNO donor pyrazinoylhydrazine-derived compounds have been prepared and characterized on the basis of analytical data and various physicochemical studies. Distorted octahedral structures for all the complexes have been proposed. The synthesized ligands and their complexes have been screened for their antibacterial activity against bacterial species Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Klebsiella pneumonae. The activity data show the metal complexes to be more active than the parent free ligands against one or more bacterial species.     

Synthesis and characterization of antibacterial polychelates of urea–formaldehyde resin with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions

We studied the reaction between urea and formaldehyde with the purpose of preparing new polychelates of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions. These compounds were characterized by elemental analysis, IR spectroscopy, ¹H‐NMR, electronic spectroscopy, thermogravimetric analysis (TGA), and molar conductance measurements. The percentage of metal in all of the polychelates was found to be consistent with 1:1.5 (metal/ligand) stoichiometry. The thermal behaviors of these coordination polymers were studied by TGA in a nitrogen atmosphere up to 750°C. The TGA results reveal that the complexes had higher thermal‐resistance properties compared to the common urea–formaldehyde resin. The molar conductivity and magnetic susceptibility measurements of the synthesized polychelates confirmed the geometry of the complexes. The antibacterial activity of the polychelates was also investigated with agar diffusion methods. The antibacterial activity of these polychelates was found to be reasonably good compared with standard drugs, namely, ciprofloxacin, ampicillin, and kanamycin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 928–936, 2006     

Water-soluble oxidized starch in complexation of Fe(III), Cu(II), Ni(II) and Zn(II) ions

The structure of the bromate-oxidized wheat starch (OS) contains partly opened glucose units with carbonyl and carboxyl groups at C2-, C3- or C6-positions. OS with a variable degree of oxidation (DO) was studied in alkaline conditions as a water-soluble complexing agent for Fe(III), Cu(II), Ni(II) and Zn(II) ions, which are common in various wastewaters. Complexation was studied by inductively coupled plasma-optical emission spectrometry (ICP–OES) in a single metal ion or multi-metal ion solutions. The DO affected the efficiency of the complexation with metal ions. OS with the high DO (carboxyl and carbonyl DO of 0.72 and 0.23, respectively) complexed and held Fe(III) or Zn(II) ions in a soluble form effectively in 0.5 mM single ion alkaline solution with the molar ratio of 0.65:1 of oxidized starch-to-metal ion (OS-to-M). The OS-to-M molar ratio of 1.3:1 was required to form a soluble complex with Cu(II) or Ni(II) ions. These complexes were thermally stable at the temperature range of 20–60 °C. OS with the low DO (carboxyl and carbonyl DO 0.47 and 0.17, respectively) complexed Zn(II) ions highly, Cu(II) and Ni(II) ions poorly and Fe(III) ions only partly. In the multi-metal ion solution of OS the solubility of these metal ions improved with the increasing DO of starch, which followed the same tendency as was observed in the single metal ion systems. The increased molar ratio of OS-to-M improved the complexation and solubility of the metal ions in all multi-metal ion series. As the soluble multi-metal ion complexes were reanalyzed after 7 days, all solutions had kept the high complexation and solubility of metal ions (ca. 90%). Complexation by OS did not show a selective binding of the ions in the multi-metal ion solution. It was concluded that the flexible, opened ring structure units of OS prevented the selective binding to metal ions but made the complexes highly stable. Titrimetric studies of OS–Fe(III) complexation showed that each anhydroglucose unit of OS had more than one coordination site and as the content of OS increased, the free sites coordinated to Fe(III) ions and formed cross-linked starch structures.