Improved transesterification of waste cooking oil into biodiesel using calcined goat bone as a catalyst

In this study, potassium hydroxide-treated animal bones were employed? as a solid heterogeneous catalyst in transesterification of waste cooking oil. This catalyst was characterized by the Fourier-transform infrared spectroscopy (FTIR), and it displayed high-catalytic activity for biodiesel production. Optimum conditions for biodiesel production were catalyst loading 6.0% (w/w) of oil, methanol/oil molar ratio 9:1, calcination temperature 800°C, reaction temperature 65°C, and reaction time of 5 h, which gave maximum biodiesel yield of 84%. Reusability of the catalyst was also confirmed by repeated use of the same catalyst three times without losing much of its activity. Hence, calcined goat bones were found to be a potentially applicable catalyst for biodiesel production at industrial scale.     

Comparative characteristics of compression ignited engines operating on biodiesel produced from waste vegetable oil

Performance and emission characteristics of two compression ignited engines of different compression ratios, number of cylinders, cooling system, and power output are studied. Waste vegetable oil-derived biofuel is used. Engines are fueled with B0, B20 and B100 mixtures. Thermal efficiency, brake specific consumption and engine emissions (CO, Unburned HC, O₂ and NO) are reported and comparisons are made for fuel mixtures running on both engines. Trends of emissions and performance curves are compared to the literature of the available data. It is noted that the biofuel certainly affects unburned HC emissions regardless of engine specifications and/or operating conditions. However, the type of fuel or adding biofuel to diesel may not affect parameters such as exhaust gas temperature and emissions (CO, Unburned HC, O₂, NO). These parameters may change as functions of engine specifications and operating conditions regardless of biofuel or diesel being used. These findings are supported by separate investigations using different biofuels in literature.     

Optimization of biodiesel production from waste cooking oil using waste bone as a catalyst

This work determined the association between several parameters of biodiesel production from waste cooking oil (WCO) using waste bovine bone (WBB) as catalyst to achieve a high conversion to fatty acid methyl ester (%FAME). The effect of three independent variables was used as the optimum condition using response surface methodology (RSM) for maximizing the %FAME. The RSM analysis showed that the ratio of MeOH to oil (mol/mol), catalyst amount (%wt), and time of reaction have the maximum effects on the transform to FAME. Moreover, the coefficient of determination (R²) for regression equations was 99.19%. Probability value (P < 0.05) demonstrated a very good significance for the regression model. The optimal values of variables were MeOH/WCO ratio of 15.49:1 mol/mol, weight of catalyst as 6.42 wt%, and reaction time of 128.67 min. Under the optimum conditions, %FAME reached 97.59%. RSM was confirmed to sufficiently describe the range of the transesterification parameters studied and provide a statistically accurate estimate of the best transform to FAME using WBB as the catalyst.     

Potential of biodiesel from waste cooking oil in Mexico

The aim of this study is to evaluate the potential use of biodiesel produced from waste cooking oil (WCO) in Mexico and its CO₂ emission reduction potential for the Mexican transport sector and associated costs. The results show, based on 2010 data, that the potential of biodiesel from WCO is between 7.8 PJ and 17.7 PJ that represent between 1.5% and 3.3% of petro-diesel consumption for the road transport sector and can reduce between 0.51 and 1.02 Mt of CO₂, (1.0%–2.7% of CO₂-associated emissions), depending on the recovery ratio of WCO from vegetable oil consumption for cooking and considering CO₂ emissions for biodiesel production and methanol emissions during production and combustion in the blend. Primary energy used to produce 1 MJ of WCO-biodiesel is 0.8727 MJ, while literature reports 1.2007 MJ to produce 1 MJ of petro-diesel. Biodiesel costs are similar to petro-diesel costs if WCO is free. The paper offers suggestions for policies that promote increased recollection of WCO for biodiesel production and reduced illegal marketing of WCO, which is the main barrier to increase biodiesel production from WCO. The data used for the analysis is based on a case study of a WCO biodiesel plant that operates in Mexico City.     

One-step production of biodiesel through simultaneous esterification and transesterification from highly acidic unrefined feedstock over efficient and recyclable ZnO nanostar catalyst

Zinc oxide (ZnO) nanostar synthesized by simple and up-scalable microwave-assisted surfactant free hydrolysis method was applied as catalyst for biodiesel synthesis through one-step simultaneous esterification and transesterification from high free fatty acid (FFA) contaminated unrefined feedstock. It was found that ZnO nanostar catalyst was reacted with FFA to yield zinc oleate (ZnOl) as intermediate and finally became zinc glycerolate (ZnGly). With the re-deposition of ZnGly back to the ZnO nanostar catalyst at the end of the reaction, the catalyst can be easily recovered and stay active for five cycles. Furthermore, the rate of transesterification is highly promoted by the presence of FFA (6 wt.%) which makes it an efficient catalyst for low grade feedstock like waste cooking oil and crude plant oils.     

A bone-based catalyst for biodiesel production from waste cooking oil

Biodiesel production via transesterification of waste cooking oil (WCO) with methanol using waste chicken bone-derived catalyst was investigated. The calcium carbonate content in the waste chicken bone was converted to calcium oxide (CaO) at a calcinations temperature of 800°C. The catalysts were prepared by calcination at 300–800°C for 5 h and catalyst characterization was carried out by X-ray diffraction (XRD) and Brunauer–Emmett–Teller (BET) surface area measurement. CaO was used as catalyst for biodiesel production. The results of the optimization imply that the catalyst concentration of 3.0 wt%, methanol to oil ratio of 3:1, and reaction temperature of 80°C for 3 h provide the maximum values of yield in methyl ester production. Reusability of the catalyst from calcined waste chicken bone was studied for four times, with a good yield.     

固体酸催化剂在生物柴油合成实验中的研究

针对生物柴油催化合成技术中，采用一般催化剂所存在的问题，自制了4种固体酸催化剂，测试了它们在以大豆酸化油为原料制备生物柴油反应中的催化活性及重复使用性，确定了合成生物柴油的工艺条件。     

Effect of reaction parameters on the catalytic transesterification of cottonseed oil using silica sulfuric acid

Transesterification of refined cottonseed oil was studied in the presence of silica sulfuric acid as a new heterogeneous solid acid catalyst to overcome the drawbacks of homogeneous alkali and acid catalysts. The effect of various reaction parameters, such as oil to methanol ratio, reaction temperature, reaction time, and catalyst amount, was investigated. The highest methyl ester conversion was obtained at 373 K using 5% catalyst amount and 1:20 methanol ratio within 8 h. Silica sulfuric acid was found to be a promising catalyst for cleaner biodiesel production without tedious post treatments for the product purification.     

Esterification of fatty acids using acid-activated Brazilian smectite natural clay as a catalyst

This work reports the use of an acid-activated Brazilian smectite natural clay-based catalyst in the esterification of fatty acids at atmospheric pressure and without a co-solvent. Conversion levels of 99%, 98%, 93% and 80% were reached for caprylic, lauric, stearic and oleic methyl esters, respectively, using 1:3 fatty acid/methanol molar ratio, heating bath at 100 °C after 4 h. A conversion level of 89% was achieved for methyl esters from a fatty acid residue of the palm oil refining industry in the same reaction condition. The acid-activated clay provided better performance than the commercial catalyst K-10. The effects of catalyst amount, temperature, fatty acid/alcohol molar ratio and time were investigated. The heating activation of the catalyst immediately before the catalytic test increased the conversion from 94% to 99% using 1:1.5 stearic acid/methanol molar ratio, heating bath at 100 °C after 4 h. The catalyst was reused five times. The conversion decreases less than 5% in the first three reuses. The smectite natural clay and the catalyst were characterized by X-ray fluorescence, X-ray diffraction, n-butylamine thermodesorption, nitrogen adsorption analysis, thermogravimetric analysis and differential thermal analysis.     

大豆酸化油制备生物柴油的研究

试验研究了大豆酸化油在复合酸催化剂的作用下与甲醇发生转酯化和酯化反应生成脂肪酸甲酯(生物柴油)的最佳反应条件.试验结果表明,该酯化及转酯化反应的最佳操作条件:复合酸催化剂的用量为大豆油质量的5%、油醇摩尔比为1:6、反应时间为6h、反应温度为65℃.     

NaOH impregnated sepiolite based heterogeneous catalyst and its utilization for the production of biodiesel from canola oil

NaOH/sepiolite nanocomposite heterogenous base catalyst (NaOH/sep.) was prepared via impregnation process and tested in a three-neck flask equipped with thermometer and reflux condenser for the production of biodiesel from transesterification of canola oil in an excess amount of methanol. The ratio of NaOH and sepiolite was selected as 1:4. The influence of various operational parameters was examined such as methanol to oil molar ratio, catalyst dosage, and reaction temperature. Untreated sepiolite and NaOH loaded sepiolite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Scanning electron microscopy and Energy dispersive spectroscopy analysis. Overall NaOH/sep. based biodiesel production yield was examined by the help of Gas chromatography-mass spectrometry analysis. The yield was calculated from the peak areas as 80.93% which is better than that of expensive catalysis system using studies.     

Optimization of conversion of waste rapeseed oil with high FFA to biodiesel using response surface methodology

In the present study, waste rapeseed oil with high free fatty acids (FFA) was used as feedstock for producing biodiesel. In the pretreatment step, FFA was reduced by distillation refining method. Then, biodiesel was produced by alkaline-catalyzed transesterification process, which was designed according to the 2⁴ full-factorial central composite design. The response surface methodology (RSM) was used to optimize the conditions for the maximum conversion to biodiesel and understand the significance and interaction of the factors affecting the biodiesel production. The results showed that catalyst concentration and reaction time were the limiting conditions and little variation in their value would alter the conversion. At the same time, there was a significant mutual interaction between catalyst concentration and reaction time.The biodiesel produced in the present experiment was analyzed by gas chromatography/mass spectrometry (GC/MS), which showed that it mainly contained six fatty acid methyl esters. In addition, the diesel indexes analysis showed that most of the fuel properties were in reasonable agreement with the 0# diesel standard of China (GB252-2000) and the biodiesel standard of America (ASTM D6751).     

Synthesis and characterisation of rubber seed oil trans-esterified biodiesel using cement clinker catalysts

The synthesis of biodiesel using rubber seed oil by a transesterification reaction using cement clinker catalysts was studied. The mineral composition and morphology of both the catalysts were analysed using X-ray diffraction and scanning electron microscopy. The gas chromatography–mass spectrometry, Fourier transform infrared spectroscopy and nuclear magnetic resonance studies were used to find the Fatty acid methyl ester content and various compounds of esters in the synthesised biodiesel, which showed an efficient conversion of rubber seed oil to biodiesel. The highest yield of 80% was obtained from calcium oxide catalyst (1.5?g) activated at 50°C with a methanol-to-oil ratio of 6:1. The highest yield of 70% biodiesel was obtained using a cement clinker catalyst (0.5?g) activated at 50°C with a methanol-to-oil ratio of 6:1. The significant physical properties of biodiesel flash point, acid value and saponification value were found, and the results are within the American standard test method (ASTM D6751) limits.     

Optimization of biodiesel production from waste fish oil

The present study deals with the production of biodiesel using waste fish oil. The research assesses the effect of the transesterification parameters on the biodiesel yield and its properties, including temperature (40–60 °C), molar ratio methanol to oil (3:1–9:1) and reaction time (30–90 min). The experimental results were fitted to complete quadratic models and optimized by response surface methodology. All the biodiesel samples presented a FAME content higher than 93 wt.% with a maximum, 95.39 wt.%, at 60 °C, 9:1 of methanol to oil ratio and 90 min. On the other hand, a maximum biodiesel yield was found at the same methanol to oil ratio and reaction time conditions but at lower temperature, 40 °C, which reduced the saponification of triglycerides by the alkaline catalyst employed. Adequate values of kinematic viscosity (measured at 30 °C) were obtained, with a minimum of 6.30 mm²/s obtained at 60 °C, 5.15:1 of methanol to oil ratio and 55.52 min. However, the oxidative stability of the biodiesels produced must be further improved by adding antioxidants because low values of IP, below 2.22 h, were obtained. Finally, satisfactory values of completion of melt onset temperature, ranging from 3.31 °C to 3.83 °C, were measured.     

Potential of waste palm cooking oil for catalyst-free biodiesel production

Disposal of waste palm cooking oil (WPCO) via an environmental-friendly route is of major importance in the quest for sustainable development. In this study, WPCO was utilized instead of refined vegetable oils as the source of triglycerides for biodiesel production. WPCO contains several impurities, such as water and free fatty acids, which limit its application in catalytic transesterification processes. Consequently, a catalyst-free process using supercritical methanol was employed to investigate the potential of WPCO as an economical feedstock for biodiesel production. The parameters that influence the reaction, including reaction time, temperature and the molar ratio of alcohol to oil, were investigated. For comparison purposes, refined palm oil (RPO) was also subjected to supercritical methanol reaction and it was found that both processes produced comparable optimum yields of 80% at their respective optimum conditions. Hence, it can be concluded that WPCO has high potential as an economical and practical future source of biodiesel.     

Manufacturing of zeolite based catalyst from zeolite tuft for biodiesel production from waste sunflower oil

In the present work, zeolite based catalyst was prepared from zeolite tuft by impregnation methods. The zeolite tuft was initially treated with hydrochloric acid (16%) and then several KOH/zeolite catalysts were prepared by impregnation in KOH solutions. Various solutions of KOH with different molarities (1–6 M) were used. Further modification for the catalyst was performed by a 2nd step impregnation treatment by heating and stirring the KOH/zeolite to 80 °C for 4 h. The zeolite tuft and the prepared catalysts were characterized by several analytical techniques in order to explore their physicochemical properties. These tests include: X-Ray Fluorescence (XRF), Scanning Electron Microscopy (SEM), Zero point of Charge (PHzpc), Fourier Transform Infrared (FT-IR), Energy-dispersive X-Ray analysis (EDX) and X-Ray Diffraction (XRD). The catalysts were then used for transesterification of waste sunflower vegetable oil in order to produce biodiesel. Among the different catalysts prepared, the 1–4M KOH/TZT catalyst provided the maximum biodiesel yield of 96.7% at 50 °C reaction temperature, methanol to oil molar ratio of 11.5:1, agitation speed of 800 rpm, 335 μm catalyst particle size and 2 h reaction time. The physicochemical properties of the produced biodiesel comply with the EN and ASTM standard specifications.     

Heterogeneous catalysis for biodiesel production from Jatropha curcas oil (JCO)

This work focuses on the development of heterogeneous catalysts for biodiesel production from high free fatty acid (FFA) containing Jatropha curcas oil (JCO). Solid base and acid catalysts were prepared and tested for transesterification in a batch reactor under mild reaction conditions. Mixtures of solid base and acid catalysts were also tested for single-step simultaneous esterification and transesterification. More soap formation was found to be the main problem for calcium oxide (CaO) and lithium doped calcium oxide (Li-CaO) catalysts during the reaction of jatropha oil and methanol than for the rapeseed oil (RSO). CaO with Li doping showed increased conversion to biodiesel than bare CaO as a catalyst. La₂O₃/ZnO, La₂O₃/Al₂O₃ and La_0.1Ca_0.9MnO₃ catalysts were also tested and among them La₂O₃-ZnO showed higher activity. Mixture of solid base catalysts (CaO and Li-CaO) and solid acid catalyst (Fe₂(SO₄)₃) were found to give complete conversion to biodiesel in a single-step simultaneous esterification and transesterification process.     

Production of biodiesel from high free fatty acid Karanja (Pongamia pinnata) oil

Non-edible oil contains several unsaponifiable and toxic components, which make them unsuitable for human consumption. Karanja (Pongamia pinnata) is an underutilized plant which is grown in many parts of India. Sometimes the oil is contaminated with high free fatty acids (FFAs) depending upon the moisture content in the seed during collection as well as oil expression. The present study deals with production of biodiesel from high FFA Karanja oil because the conventional alkali-catalyzed route is not the feasible route. This paper discusses the mechanism of a dual process adopted for the production of biodiesel from Karanja oil containing FFA up to 20%. The first step is acid-catalyzed esterification by using 0.5% H₂SO₄, alcohol 6:1 molar ratio with respect to the high FFA Karanja oil to produce methyl ester by lowering the acid value, and the next step is alkali-catalyzed transesterification. The yield of biodiesel from high FFA Karanja oil by dual step process has been observed to be 96.6–97%.     

Effect of injection parameters on the combustion and emission characteristics in a common-rail direct injection diesel engine fueled with waste cooking oil biodiesel

The objective of this paper was to study the effects of the injection pressure and injection timing on the combustion and emission characteristics in a single-cylinder common-rail direct injection (CRDI) diesel engine fueled with waste cooking oil (WCO) biodiesel and commercial diesel fuel. The fuel property including fatty acid composition for the biodiesel were measured and compared with those of the conventional diesel fuel. The engine tests were conducted at two injection pressures (80 and 160 MPa) and different injection timings from −25 to 0 crank angle degree (CAD) after top dead center (aTDC) under two different engine loads. The results showed that the indicated specific fuel consumption (ISFC) with respect to the injection timings of the biodiesel was higher than that of the diesel fuel under all experimental conditions. The peak cylinder pressure and the peak heat release rate of the biodiesel were slightly lower, while the ignition delay was slightly longer under all operating conditions. In terms of emissions, the biodiesel had benefits in reduction of smoke, carbon monoxide (CO), hydrocarbon (HC) emissions especially with high fuel injection pressure. The nitrogen oxide (NO_x) emissions of the biodiesel were relatively higher than those of the diesel under all experimental conditions.