Investigation of liquid crystalline and photocrosslinkable poly[4‐x‐phenyl‐4′‐(m‐methacryloyloxyalkyloxy)cinnamate]s

Three series of liquid‐crystalline‐cum‐photocrosslinkable polymers were synthesized from 4‐x‐phenyl‐4′‐(m‐methacryloyloxyalkyloxy)cinnamates (x = ? H, ? OCH₃ and ? CN; m = 6, 8 and 10) by free radical solution polymerization using azobisisobutyronitrile as an initiator in tetrahydrofuran at 60 °C. All the monomers and polymers were characterized using intrinsic viscosity, and FTIR, ¹H NMR and ¹³C NMR spectroscopy. The liquid crystalline behavior of these polymers was examined using a hot stage optical polarizing microscope. All the polymers exhibited liquid crystalline behavior. The hexamethylene spacer‐containing polymers exhibited grainy textures; in contrast, the octamethylene and decamethylene spacer‐containing polymers showed nematic textures. Differential scanning calorimetry data confirmed the liquid crystalline property of the polymers. Thermogravimetric analysis revealed that all the polymers were stable between 236 and 344 °C in nitrogen atmosphere and underwent degradation thereafter. As the methylene chain length increases in the polymer side‐chain, the thermal stability and char yield of the polymers decrease. The photocrosslinking property of the polymers was investigated using the technique of exposing the polymer solution to UV light and using UV spectroscopy. The crosslinking reaction proceeds via 2π–2π cycloaddition reactions of the ? CH?CH? of the pendant cinnamate ester. The polymers containing electron‐releasing substituents (? OCH₃) showed faster crosslinking than the unsubstituted polymers and those containing electron‐withdrawing substituents (? CN). Copyright © 2007 Society of Chemical Industry     

Synthesis and thermal properties of polythioether‐based liquid‐crystalline polymers containing azobenzene in the side chain

BACKGROUND: Owing to the unusual structural rearrangement of polychloromethylthiirane (PCMT) at room temperature, it has not been used as the main‐chain backbone of side‐chain liquid‐crystalline polymers (SLCPs). However, it has been observed that PCMT has a relatively stable and clear structure under special conditions. Therefore, we attempted to synthesize SLCPs using PCMT as main‐chain backbone and investigated their thermal behavior. RESULTS: New polymers, poly[1‐({(4‐methoxyazobenzene‐4′‐oxy)alkyl}thio)‐2,3‐epithiopropane], in which the number of methylene units in the alkyl group is 4, 5 or 6, were prepared by means of reactions of corresponding (4‐methoxyazobenzene‐4′‐oxy)alkylthiols with PCMT. The structures of these compounds were confirmed using elemental analysis and ¹H NMR spectroscopy. The substitution ratios of the copolymers with 4, 5 and 6 methylene units in the alkyl group were 56, 75 and 80%, respectively. Differential scanning calorimetry measurements and polarized optical microscopy observations showed that the resulting copolymers exhibited thermotropic liquid‐crystalline mesomorphism with nematic phase except for the copolymer with a 56% substitution ratio. The decomposition temperature of all the synthesized copolymers was near 195 °C. CONCLUSION: This investigation has demonstrated that PCMT polymerized for 8 h has the ability to act as a suitable main‐chain backbone for SLCPs. Moreover, SLCPs could be obtained only by the reaction of PCMT with thiolate salt containing mesogenic groups. The substitution ratios increased with increasing number of methylene groups in the spacer. Copyright © 2009 Society of Chemical Industry     

Photoluminescence and excimer emission of functional groups in light‐emitting polymers

Near‐UV and blue‐light‐emitting polymers were synthesized with luminescent functional groups in the side chains or in the polymer main chain. The unsubstituted fluorophores, 2,5‐diphenylfuran, 2‐phenylbenzoxazole, and triphenylamine, do not form excimers in solution; however, in the case of polymers, excimer emission was negligible only with 2‐phenylbenzoxazole derivatives. The monomers as well as the polymers, poly(2‐(4‐vinylphenyl)‐benzoxazole), poly{N‐(4‐benzoxazol‐2‐yl‐phenyl)‐N′‐[2‐(methacryloyloxy)ethyl]urea}, and the polyurea of 2‐(4‐aminophenyl)‐5‐aminobenzoxazole with 1,5‐diisocyanato‐2‐methylpentane, were strong blue emitters; photoluminescence shifted to longer wavelengths than that of 2‐phenylbenzoxazole. Light‐emitting polymers containing 2,5‐diphenylfuran derivatives, including poly[2‐(4‐vinylphenyl)‐5‐phenylfuran], poly[2‐(4‐vinylphenyl)‐5‐(4‐tert‐butylphenyl)furan], and poly(N‐[2‐(methacryloyloxy)ethyl]‐N′‐{4‐[5‐(4‐tert‐butylphenyl)‐2‐furyl]phenyl}urea), particularly in solid films, exhibited a strong blue excimer emission. The emission characteristics of polymers with triphenylamine side chains were influenced by the mode of attachment of the luminescent group. A longer spacer group between the lumophore and the polymer main chain successfully minimized excimer emission in poly{N‐[2‐(methacryloyloxy)ethyl]‐N′‐[4‐(N,N‐diphenylamino)phenyl]urea}, showing near UV/violet photoluminescence. Polymers with a shorter connecting group, such as poly[4‐(N,N‐diphenylamino)benzyl acrylate], displayed blue excimer emission. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1634–1645, 2003     

Aromatic polyimides from m‐phenylene diamines containing pendant groups: Synthesis and characterization

Two diamine monomers, 4‐[4‐(1‐methyl‐1‐phenylethyl)phenoxy]‐1,3‐diamino benzene and 4‐{4‐[(4‐methylphenyl)sulfonyl]phenoxy}‐1,3‐diamino benzene, were synthesized, and both diamines were polycondensed with three commercial dianhydrides to obtain aromatic polyimides containing pendant groups. The polyimides were characterized by solubility tests, viscosity measurements, IR, ¹H‐NMR, and ¹³C‐NMR spectroscopy, X‐ray diffraction studies, and thermogravimetric analysis. The polyimides had inherent viscosities of 0.33–0.58 dL/g in m‐cresol at 30 ± 0.1°C. All the polyimides were amorphous and were soluble in solvents such as N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidone, N,N‐dimethylformamide, and m‐cresol. Thermogravimetric analysis of the polyimides indicated no weight loss below 410°C under a nitrogen atmosphere. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1377–1384, 2005     

Synthesis and characterization of main‐chain,second‐order,nonlinear optical polyurethanes with isolation moieties and zigzag structures

In this study, two main‐chain second‐order nonlinear optical (NLO) polyurethanes were successfully prepared with indole‐based chromophores. The introduced phenyl isolation group and the continuous zigzag polymer backbone were found to be helpful for effectively decreasing the intermolecular dipole–dipole interactions and enhancing the NLO properties of the resulting polymers. The studied polymers exhibited good optical transparency, high thermal stability, and excellent NLO effects; this indicated that the nonlinearity–stability trade‐off and nonlinearity–transparency trade‐off could be alleviated by this newly designed polymer system. Poly{4‐anilinocarbonyl[N‐ethoxyl‐5‐phenyl‐3‐azo(2′‐oxyethylene‐4′‐nitrobenzene)indole]carbonylimino} with a zigzag backbone showed a large second harmonic generation coefficient (d₃₃) value of 88.4 pm/V. However, poly{5‐naphthyliminocarbonyl[N‐ethoxyl‐5‐phenyl‐3‐azo(2′‐oxyethylene‐4′‐nitrobenzene)indole]carbonylimino} (PUAZN) with a continuous zigzag structure exhibited a higher d₃₃ value of 116.2 pm/V, which was attributed to the unique rigid and zigzag linkage of 1,5‐naphthalene as the isolation spacer. The enhanced NLO efficiency and relatively longer term temporal stability made PUAZN as a promising candidate for practical applications in photonic devices. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42974.     

Synthesis and characterization of fluorine‐containing liquid crystalline polysiloxanes bearing cholesteryl cinnamate mesogens and trifluoromethyl‐substituted mesogens

Several novel side‐chain liquid crystalline (LC) polysiloxanes bearing cholesteryl cinnamate mesogens and trifluoromethyl‐substituted mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a cholesteric LC monomer cholesteryl 3‐(4‐allyloxy‐phenyl)‐acryloate and a fluoro‐containing LC monomer 4‐[2‐(3‐trifluoromethyl‐phenoxy)‐acetoxy]‐phenyl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques, such as FTIR, ¹H‐NMR, ¹³C‐NMR, TGA, DSC, POM, and XRD. The temperatures at which 5% weight loss occurred were greater than 300°C for all the polymers, and the residue weight near 600°C increased slightly with increase of the trifluoromethyl‐substituted mesogens in the fluorinated polymer systems. The samples containing mainly cholesteryl cinnamate mesogens showed chiral nematic phase when they were heated and cooled, but the samples containing more trifluoromethyl‐substituted mesogens exhibited chiral smectic A mesophase. The glass transition temperature of the series of polymers increased slightly with increase of trifluoromethyl‐substituted mesogens in the polymer systems, but mesophase–isotropic phase transition temperature did not change greatly. In XRD curves, the intensity of sharp reflections at low angle increased with increase of trifluoromethyl‐substituted mesogens in the fluorinated polymers systems, indicating that the smectic order derived from trifluoromethyl‐substituted mesogens should be strengthened. These results should be due to the fluorophobic effect between trifluoromethyl‐substituted mesogens and the polymer matrix. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of novel phenyl‐substituted poly(p‐phenylene vinylene) derivatives

Two novel phenyl‐substituted poly(p‐phenylene vinylene) derivatives, poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐1,4‐phenylenevinylene} (EDP‐PPV) and poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐5‐methoxy‐1,4‐phenylenevinylene} (EDMP‐PPV), and their copolymer, poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐1,4‐phenylene‐vinylene‐co‐2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐5‐methoxy‐1,4‐phenylenevinylene} (EDP‐co‐EDMP‐PPV; 4:1, 1:1, and 1:4), were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H‐NMR, ¹³C‐NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, and photoluminescence and electroluminescence (EL) spectroscopy. The EL polymers possessed excellent solubility in common solvents and good thermal stability with a 5% weight loss temperature of more than 380°C. The weight‐average molecular weights and polydispersity indices of EDP‐PPV, EDMP‐PPV, and EDP‐co‐EDMP‐PPV were 1.40–2.58 × 10⁵, and 1.19–1.52, respectively. Double‐layer light‐emitting diodes with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline)aluminum/Al devices were fabricated, and EDP‐co‐EDMP‐PPV (1:1) showed the highest EL performance and exhibited a maximum luminance of 1050 cd/m² at 19.5 V. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1259–1266, 2005     

Preparation and orientation behavior of multi‐walled carbon nanotubes grafted with a side‐chain azobenzene liquid crystalline polymer

Covalent functionalization of multi‐walled carbon nanotubes (MWNTs) with side‐chain azobenzene liquid crystalline poly{6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate} (PMMAZO) was successfully achieved via atom transfer radical polymerization. The resultant samples were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis and transmission electron microscopy. The results of differential scanning calorimetry and polarized optical microscopy show that the liquid crystalline behavior of PMMAZO‐functionalized carbon nanotubes (CNT‐PMMAZO) is similar to that of the PMMAZO homopolymer. The orientation of MWNTs and CNT‐PMMAZO in a PMMAZO matrix in the presence of an electric field was investigated. The results indicate that the orientation of MWNTs is dominated by the viscosity of the matrix, but the orientation of CNT‐PMMAZO is controlled by both the viscosity and the presence of a liquid crystalline phase ascribed to the compatibility between MWNTs and PMMAZO becoming better after covalent modification. Copyright © 2010 Society of Chemical Industry     

Side‐chain liquid‐crystalline polymers with a limonene‐co‐methyl methacrylate main chain: Synthesis and characterization of polymers with phenyl benzoate mesogenic groups

A new series of liquid‐crystalline polymers with a polymer backbone of limonene‐co‐methyl methacrylate were synthesized and characterized, and the spacer length was taken to be nine methylene units. The chemical structures of the obtained olefinic compound and polymers were confirmed with elemental analysis and proton nuclear magnetic resonance spectroscopy. The thermal behavior and liquid crystallinity of the polymers were characterized with differential scanning calorimetry and polarized optical microscopy. The polymers exhibited thermotropic liquid‐crystalline behavior and displayed a glass‐transition temperature at 48°C. The appearance of the characteristic schlieren texture confirmed the presence of a nematic phase, which was observed under polarized optical microscopy. These liquid‐crystalline polymers exhibited optical activity. A comparison was also made with polyacrylates and polymethacrylate‐based materials. This revealed that the nature of the polymer backbone had a major effect on the liquid‐crystalline properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4595–4600, 2006     

Synthesis and characterization of liquid crystalline polymers containing aromatic ester mesogen and a nonmesogenic ferrocene unit in the spacer

A new series of liquid crystalline polymers containing aromatic triad ester mesogen and 1,1′‐disubstituted ferrocene as a nonmesogenic unit along with polymethylene spacer was synthesized. The polymer was synthesized by a room temperature polycondensation reaction between bis(4‐chloroformyl phenyloxy alkyl ferrocene dicarboxylate) and quinol. The alkyl groups have been varied by an even number of methylene groups with a range from two to ten groups. All the polymers were found to possess liquid crystalline properties. The identification of the mesophase is more transparent with an increase in the spacer. The thermal characteristics were studied using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results reveal that the thermal stability of the polymers was decreased with increasing spacer length. The T_g, T_m, and T_i of the polymers decreased with increasing methylene groups. The incorporation of the ferrocene moiety also has a considerable effect on the glass transition temperature. The char yield of the polymer decreases with an increasing methylene chain length. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3494–3501, 2002     

New,organo‐soluble,thermally stable aromatic polyimides and poly(amide‐imide) based on 2‐[5‐(3,5‐dinitrophenyl)‐1,3, 4‐oxadiazole‐2‐yl]pyridine

New, thermally stable polyimides and a poly(amide‐imide) containing a 1,3,4‐oxadiazole‐2‐pyridyl pendant group based on 2‐[5‐(3,5‐diaminophenyl)‐1,3,4‐oxadiazole‐2‐yl]pyridine were synthesized. The synthesis and characterization of the model compound 2‐{5‐[(3,5‐bistrimellitimido)phenyl]‐1,3,4‐oxadiazole‐2‐yl}pyridine (DIDA) were also investigated, and DIDA was used in the preparation of the poly(amide‐imide) in an ionic liquid, 1‐butyl‐3‐methylimidazolium bromide, as a polymerization solvent. The polymers were characterized by separating and characterizing the poly(amic acid) intermediates using infrared and elemental analyses. The prepared polymers were soluble in polar and aprotic solvents, such as dimethylformamide, dimethylsulfoxide, N‐methyl‐2‐pyrrolidone and dimethylacetamide. Thermal behaviour of the polymers was studied using thermogravimetric analysis and differential scanning calorimetry. The inherent viscosities of the polyimide and poly(amide‐imide) solutions were in the range 0.34–0.85 dL g^?1 (in concentrated sulfuric acid with a concentration of 0.125 g dL^?1 at 25 ± 0.5 °C). The removal of Co(II) from aqueous solutions was performed using one of the polyimides. It was found that this polymer had a maximum adsorption capacity and efficiency at pH = 10.0. Copyright © 2012 Society of Chemical Industry     

Thermotropic main‐chain liquid‐crystalline photodimerizable poly(vanillylidenealkyloxy alkylphosphate ester)s containing a cyclopentanone moiety

A new class of main‐chain liquid‐crystalline photodimerizable vanillylidene‐containing alkylpolyphosphate esters were synthesized from 2,5‐bis[m‐hydroxyalkyloxy(vanillylidene)] cyclopentanones with various alkylphosphoro‐ dichloridates by solution polycondensation in chloroform at ambient temperature. Their chemical structures were confirmed by FT‐IR, ¹H, ¹³C and ³¹P NMR spectroscopic analysis. Dilute‐solution viscosity values were measured in order to obtain the intrinsic viscosities of the synthesized polymers. Mesogenic properties and phase behavior were investigated by the use of hot‐stage optical polarized microscopy and differential scanning calorimetry. Thermogravimetric analysis revealed that all of the polymers were stable up to 170–230 °C and decomposed with high char yields. The shorter methylene‐chain‐containing polymers did not show a liquid‐crystalline phase, while the longer methylene‐chain‐ containing polymers showed grainy and nematic textures. The T_g, T_m and T_i values of the polymers decreased with increasing flexible methylene chain length in the polymer backbones. The photocrosslinking properties of the polymers were studied by UV light/UV spectroscopy; the crosslinking proceeds via 2π–2π cycloaddition reactions of the vanillylidene exocyclic double bonds of the polymers. The rate of crosslinking was faster for the pendant ethoxy‐containing polymers than that of the pendant methoxy‐containing polymers. Copyright © 2005 Society of Chemical Industry     

Liquid crystalline and photocrosslinkable poly(4,4′‐stilbeneoxy) alkylarylphosphates

Three series of liquid crystalline and photocrosslinkable poly(4,4′‐stilbeneoxy) alkylarylphosphates were synthesized from various 4,4′‐bis(m‐hydroxyalkyloxy)stilbenes (m = 2, 4, 6, 8, 10) and arylphosphorodichloridates in chloroform by solution polycondensation method. Polarized optical microscope (POM) and differential scanning calorimetry (DSC) observations revealed that polymers containing less than four methylene spacer groups did not exhibit liquid crystalline (LC) texture, possibly due to smaller microdomain and restricted movement of the mesogen. In contrast, polymers containing more than four methylene spacer group established LC texture, which has been attributed to the larger monodomain and free movement of mesogens. Thermogravimetric analysis (TGA) data indicated that thermal stability and char yield decreased with increasing flexible methylene spacer groups, increased significantly for biphenyloxy and 1‐naphthyloxy containing polymers than that of phenyloxy containing polymers ascribed to increasing aromaticity, size, and number of aromatic rings. Photocrosslinking of stilbene containing polymers has been shown to proceed via 2π‐2π cycloaddition reaction by Ultra‐violet (UV) and fluorescence. The rate photocrosslinking has been found to increase with increasing number of methylene group in the main chain. The aromaticity of the side chain also increases the rate of crosslinking. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Studies on the mesomorphic properties of ferrocenylene‐based organophosphorous liquid‐crystalline polymers containing phenyl and biphenyl pendant units

The synthesis, mesomorphic character, and effect of spacers in ferrocene‐containing main‐chain liquid‐crystalline polymers are reported in this article. Two different monomers containing ferrocene and phenyl/biphenyl phosphate groups possessing even numbers of spacers from 2 to 10 were prepared and polymerized by polycondensation at room temperature. All the polymers gave birefringent melt except one. The identification of the mesophase was transparent with an increase in spacers. The effect of substitution in the side chain with regard to bulkiness and spacers were studied with thermogravimetric analysis and differential scanning calorimetry. The results reveal that the thermal stability of the polymers increased with the increasing bulkiness of the side chain and decreased with increasing spacer length. The incorporation of the phosphorous moiety also had a considerable effect on the glass‐transition temperature. Char yield of the polymer decreased with increasing methylene chain length, and it did not vary much with the size of the pendent groups. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 831–841, 2002     

Monte Carlo simulations of properties of side‐chain liquid‐crystal polymers

This paper presents a computational conformational study of side‐chain liquid‐crystal polymers to predict the optical and liquid‐crystalline properties of a series of polyepicholorohrdrin, polyacrylate, poly(methyl acrylate), and polystyrene‐based side‐chain polymers using a Monte Carlo simulation method. Some of the simulated side‐chain polymers were synthesised by chemical modification or polymerisation. The predictive capability of the orientational order parameter has been utilised to predict the liquid‐crystalline isotropic transition temperature of the investigated polymers, which was used to infer the type of distribution in the synthesised polymers. The predictive possibilities of this criterion are explored in the estimation of the nematic–isotropic transition temperatures of the simulated polymers. Evidence is presented to suggest that for side‐chain liquid‐crystalline polymer molecules the nematic to isotropic transition occurs when the order parameter reaches a value of 0.43 according to Maier–Saupe mean‐field theory. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of high molecular weight side chain liquid crystalline/photoactive polymers

Various liquid crystalline and photoactive azobenzene monomers were synthesized and attached to copoly(methyl methacrylate‐glycidyl methacrylate) [copoly (MMA‐GMA)] to get high molecular weight side chain liquid crystalline (LC)/photoactive copolymers. Further, spacers are generated in situ and reactive groups are obtained after the modification. All monomers and polymers were thoroughly characterized by FTIR, ¹H and ¹³C NMR, UV‐VIS spectrophotometry, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and polarized optical microscopy. All side chain LC polymers showed higher thermal stability than that of copoly(MMA‐GMA). Three LC and one azo monomer exhibited characteristic nematic mesophase where as one LC monomer has shown nematic and sanded smectic‐A texture. The rate of trans‐cis isomerization of polymer was lower than that of the monomer and both monomers and polymers showed slow back isomerization. Present approach offers convenient way to synthesize high/desired molecular weight photoactive LC polymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and phase behavior of chiral side‐chain liquid‐crystalline polysiloxanes containing two mesogenic groups

The synthesis of chiral side‐chain liquid‐crystalline polysiloxanes containing both cholesteryl undecylenate (M_I) and 4‐allyloxy‐benzoyl‐4‐(S‐2‐ethylhexanoyl) p‐benzenediol bisate (M_II) mesogenic side groups was examined. The chemical structures of the obtained monomers and polymers were confirmed with Fourier transform infrared spectroscopy or ¹H‐NMR techniques. The mesomorphic properties and phase behavior of the synthesized monomers and polymers were investigated with polarizing optical microscopy, differential scanning calorimetry, and thermogravimetric analysis (TGA). Copolymers IIP–IVP revealed a smectic‐A phase, and VP and VIP revealed a smectic‐A phase and a cholesteric phase. The experimental results demonstrated that the glass‐transition temperature, the clearing‐point temperature, and the mesomorphic temperature range of IIP–VIP increased with an increase in the concentration of mesogenic M_I units. TGA showed that the temperatures at which 5% mass losses occurred were greater than 300°C for all the polymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2670–2676, 2002     

Synthesis and properties of side‐chain liquid‐crystalline polysiloxanes containing hemiphasmidic mesogens

The synthesis of hemiphasmidic monomers 4‐[(3,4,5‐triethoxy)benzoyloxy]‐4′‐[(p‐allyloxy)benzoyloxy]biphenyl (M₁), 4‐[(3,5‐diethoxy)benzoyloxy]‐4′‐[(p‐allyloxy)‐benzoyloxy]biphenyl (M₂), and of the corresponding side‐chain liquid‐crystalline polysiloxanes (P₁, P₂) was carried out. For comparison, rodlike monomer 4‐[(p‐ethoxy)‐benzoyloxy]‐4′‐[(p‐allyloxy)benzoyloxy]biphenyl (M₃) and its polysiloxanes (P₃) were also prepared. The chemical structures of the monomers and polymers obtained were confirmed by FTIR and ¹H‐NMR spectra. Their mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, polarizing optical microscopy, and X‐ray diffraction measurements. The relationship between structures and properties was discussed. It was observed that M₁ and M₃ were enantiotropic nematic phase, M₂ was monotropic mesophase, and their poly(methylsiloxanes) (P₁–P₃) possessed a broad range enantiotropic nematic phases and high thermal stability. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 946–952, 2005     

Synthesis and Characterization of Novel AB and ABA Rod–Coil Block Copolymers

Two series of novel rod–coil block copolymers, poly(ɛ-caprolactone)-b-poly{2,5-bis[(4-methoxyphenyl) oxycarbonyl] styrene} (PCL-b-PMPCS) and poly{2,5-bis[(4-methoxyphenyl) oxycarbonyl] styrene}-b-poly(ɛ-caprolactone)-b-poly{2,5-bis[(4-methoxyphenyl) oxycarbonyl] styrene} (PMPCS-b-PCL-b-PMPCS), were successfully synthesized via atom transfer radical polymerization in chlorobenzene solution using macro-initiator and CuBr/Sparteine complex as catalyst. The results show that the number average molecular weight M_n increased versus the monomer conversion and that the polydispersity M_w/M_n was quite narrow (<1.35), which were the character of controlled polymerization. The structure of the block copolymers was experimentally confirmed by ¹H NMR. And the liquid crystalline behavior of them was studied using DSC and POM. The data obtained implied that the block copolymers with low molar percentage of PMPCS block could show T_m of PCL. While only the copolymers with long rigid segment PMPCS could form liquid crystalline phase, which was quite stable with a high clearing point.     

Zur Synthese und Funktionalisierung neuer Poly[(silylen)‐2,5‐thiophene]

Treatment of 2,5‐dilithiothiophene with (dimethylamino) methylsilylbis(triflates) gave poly[(dimethylamino‐silylene)‐2,5‐thiophene] 4 in high yield. The amino–silyl bond was cleaved selectively by triflic acid leading to triflate substituted poly[(silylene)‐2,5‐thiophene] 5 . Conversions of this polymers with nucleophiles gave other functionalized derivatives 6 – 9 . Hydrosilylation reaction between silicon–vinyl and silicon–hydrogen derivatives results in polymer networks which may serve as interesting preceramic materials. The structures of the polymers were proven by NMR spectroscopy (²⁹Si, ¹³C, ¹H).