共查询到20条相似文献,搜索用时 31 毫秒
1.
2.
软件无线电的出现是无线电通信从模拟到数字、从固定到移动后,由硬件到软件的第三次变革,被认为是继模拟通信技术、数字通信技术之后的第三代无线通信技术。软件无线电以其极强的灵活性和开放性代表着无线通信系统的发展趋势,文中分别从软件无线电技术原理、关键技术、应用等方面进行了阐述。 相似文献
3.
4.
数字信号处理技术在软件无线电中的应用 总被引:4,自引:0,他引:4
初步探讨了宽带A/D变换,数字中频处理和DSP等现代数字信号处理技术在软件无线电中的应用,根据器件的技术水平给出了具体的实现框图。 相似文献
5.
软件无线电接收机多速率信号的多段处理方法研究 总被引:1,自引:1,他引:0
在软件无线电数字接收机中,为了支持多种速率的信号处理,通常采用分数倍重采样,在硬件实现时,非常耗时和耗资源,这也成为软件无线电数字接收机的难点。在分析传统实现模型的基础上,提出一种基于整数倍重采样的新方法,即按照一定的分段方法,实现多速率的多段动态处理,可以避免分数倍重采样,节省运算时间和硬件资源。通过Matlab仿真证明,该方法性能良好,实用可行,可以用于数字接收机的多速率处理系统,在其工程实现上有较大的参考意义。 相似文献
6.
在软件无线电数字接收机中,从AD前端采集过来的数字信号频率高达72 MHz,如此高的频率使得后端DSP不能直接完成相关的数字信号处理任务。因此合理的设计基于FPGA的DDC,以降低数字信号频率,方便后端DSP实时完成相关的数字信号处理任务就显得尤为重要。在很多数字信号处理系统中,数字信号频率是非常高的,而后端数字信号处理器件几乎不能满足系统的实时性要求,此时通过合理的设计DDC就可以解决上述问题。 相似文献
7.
8.
Virtual radios 总被引:7,自引:0,他引:7
Bose V. Ismert M. Welborn M. Guttag J. 《Selected Areas in Communications, IEEE Journal on》1999,17(4):591-602
Conventional software radios take advantage of vastly improved analog to digital converters (ADCs) and digital signal processing (DSP) hardware. Our approach, which we refer to as virtual radios, also depends upon high performance ADCs. However, rather than use DSPs, we have chosen to ride the curve of rapidly improving workstation hardware. We use wideband digitization and then perform all of the digital signal processing in user space on a general purpose workstation. This approach allows us to experiment with new approaches to signal processing that exploit the hardware and software resources of the workstation. Furthermore, it allows us to experiment with different ways of structuring systems in which the radio component of communication devices is integrated with higher-level applications. This paper describes the design and performance of an environment we have constructed that facilitates building virtual radios and of two applications built using that environment. The environment consists of an input/output (I/O) subsystem that provides high bandwidth low latency user-level access to digitized signals and a programming environment that provides an infrastructure for building applications. The applications, which exemplify some of the benefits of virtual radios, are a software cellular receiver and a novel wireless network interface 相似文献
9.
软件无线电体系结构中的总线瓶颈及其解决方案 总被引:2,自引:0,他引:2
软件无线电系统中的模块化、数字式通硬件平台是进行实时信息处理的并行处理系统,其总体性能取决于系统中信号处理,信息传递和存储能力的优化设计。本文讨论在基于总线的软件无线电体系结构中的总线瓶颈及其解决方案。 相似文献
10.
Digital radio transmission systems use complex modulation schemes that require powerful signal processing techniques to correct channel distortions and to minimize bit-error rates (BERs). Combined analog and digital processors are investigated for minimizing the mean square error (MSE) of the radio receiver. The analog filters are implemented using acousto-optic (AO) processing since rapidly adaptable, inverse channel filters can be produced for either minimum or nonminimum phase channels. A specific architecture is identified and a laboratory system is tested to verify the ability of the processor to track and correct time-varying channels. Computer simulations are used to show that hybrid analog and digital equalization allows an increase in the modulation capacity of radio, relative to all digital equalization, while maintaining similar equipment signatures 相似文献
11.
12.
概述了软件无线电的发展和应用,为满足某通信中频接收机的数字化要求,介绍了应用软件无线电思想设计的S波段某通信系统560MHz中频数字化接收机的方案,对其基本原理和实现的关键技术做了分析,最后给出了实现该数字化通信接收机的原理框图及具体方法。整个系统集成度高、可靠性好、使用灵活,已在S波段某型通信系统中得到了应用。 相似文献
13.
基于Simulink的单比特数字接收机设计 总被引:1,自引:1,他引:0
瞬时测频接收机拥有大工作带宽以及高截获概率,是电子战系统的一个重要组成部分,然而它无法对同时到达的多个信号进行测频。单比特接收机是解决这个问题的一种方法,由于它采用了很低的ADC采样位数,以及直接射频采样能力和独特的测频算法,使它具有大带宽、实时测量双音信号频率信息的优异性能。相比于典型的数字接收机,自身结构也得到了极大的简化。提出了一种单比特接收机硬件设计架构,并基于Simulink工具搭建了模型,分析了这种设计的性能。该模型具有高度的灵活性,对于单比特接收机的设计与系统实现具有一定的指导意义。 相似文献
14.
15.
Radio frequency (RF) subsampling can be used by radio receivers to directly down‐convert and digitize RF signals. A goal of a cognitive radio/software defined ratio (CR/SDR) receiver design is to place the analog‐to‐digital converter (ADC) as near the antenna as possible. Based on this, a band‐pass sampling (BPS) frontend for CR/SDR is proposed and verified. We present a receiver architecture based second‐order BPS and signal processing techniques for a digital RF frontend. This paper is focused on the benefits of the second‐order BPS architecture in spectrum sensing over a wide frequency band range and in multiband receiving without modification of the RF hardware. Methods to manipulate the spectra are described, and reconstruction filter designs are provided. On the basis of this concept, second‐order BPS frontends for CR/SDR systems are designed and verified using a hardware platform. 相似文献
16.
软件无线电在现代雷达中的应用 总被引:5,自引:0,他引:5
简要阐述软件无线电的起源,并结合雷达系统的各组成部分介绍了软件无线电技术在其中的应用,包括数字接收机、数字信号处理器、数字频率源、数字波形产生、智能天线,以及在现代雷达中的软件无线电技术发展和方向。 相似文献
17.
18.
在探讨了软件无线电的基本概念,基于软件无线电定义的发射平台结构及多抽样率数字信号处理的基本内容的基础上,着重探讨了软件无线电发射平台中多抽样率数字信号处理的应用,并以单边带调制信号(SSB)为例,指出与传统SSB产生方法不同的结构。 相似文献
19.
20.
基亏DSP的多路音/视频采集处理系统设计 总被引:1,自引:0,他引:1
采用TI公司的TMS320DM642型数字媒体数字信号处理器(DSP)设计多路音/视频采集处理系统,实现实时处理4路模拟视频和音频输入、1路模拟/数字视频和1路模拟音频信号输出的功能,该系统可适应PAL/NTSC标准复合视频CVBS或分量视频Y/C格式的模拟信号和标准麦克风或立体声音频模拟输入,具有PAL/NTSC标准S端子或数字RGB模拟/数字信号输出和标准立体声音频模拟输出。并给出软/硬件设计原理和电路。 相似文献