Curing and mechanical properties of dicyanate/poly(ether sulfone) semi‐interpenetrating polymer networks

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of a dicyanate resin and a poly(ether sulfone) (PES) were prepared, and their curing behavior and mechanical properties were investigated. The curing behavior of the dicyanate/PES semi‐IPN systems catalyzed by an organic metal salt was analyzed. Differential scanning calorimetry was used to study the curing behavior of the semi‐IPN systems. The curing rate of the semi‐IPN systems decreased as the PES content increased. An autocatalytic reaction mechanism was used to analyze the curing reaction of the semi‐IPN systems. The glass‐transition temperature of the semi‐IPNs decreased with increasing PES content. The thermal decomposition behavior of the semi‐IPNs was investigated. The morphology of the semi‐IPNs was investigated with scanning electron microscopy. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1079–1084, 2003     

Studies and characterization of RESOL/VAc–EHA/HMMM IPN systems in aqueous medium

Resol was solution‐blended with vinyl acetate‐2‐ethylhexyl acrylate (VAc–EHA) resin in an aqueous medium, in varying weight fractions, with hexamethoxymethylmelamine (HMMM) as a crosslinker and the data were compared with a control. The present work was aimed to obtain an optimum combination of high‐temperature resistance by synthesis of an interpenetrating network (IPN) of the resins. The control gave a semi‐IPN system, in which the resol crosslinked, while the acrylic did not, whereas the blend, where HMMM was the crosslinker, gave a full‐IPN system. FTIR spectra of the blends of resol/VAc–EHA/HMMM indicated the formation of new stretching, which was generated due to crosslinking reactions among VAc–EHA and the crosslinker HMMM. TGA showed that, with an increase in the VAc–EHA percent in semi‐IPNs, the decomposition temperature decreased gradually, whereas in case of full‐IPNs, the decomposition temperature increased with increase in the VAc–EHA percent. However, the full‐IPNs had a higher decomposition temperature than that of the semi‐IPNs, at the same resol/(VAc–EHA) ratio. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3581–3588, 2002     

Cure kinetics and physical properties of dicyanate/polyetherimide semi‐IPNs

The curing behavior and physical properties of dicyanate/polyetherimide (PEI) semi‐interpenetrating polymer network (IPN) systems were investigated. Differential scanning calorimetry (DSC) was used to study the curing behavior of the dicyanate/PEI semi‐IPN systems. The curing rate of the semi‐IPN system decreased as the PEI content increased. An autocatalytic reaction mechanism can describe well the curing kinetics of the semi‐IPN systems. The reaction kinetic parameters were determined by fitting DSC conversion data to the kinetic equation. The glass transition temperature of the semi‐IPNs decreased with increasing PEI content. Two glass transitions due to phase‐separated morphology were observed for the semi‐IPN containing over 15 phr (parts per hundred parts of dicyanate resin) PEI. The thermal stability and dynamic mechanical properties of the semi‐IPNs were measured by thermal analysis.     

Miscibility and thermal and dynamic mechanical behaviour of semi‐interpenetrating polymer networks based on polyurethane and poly(hydroxyethyl methacrylate)

The thermodynamic miscibility and thermal and dynamic mechanical behaviour of semi‐interpenetrating polymer networks (semi‐IPNs) of crosslinked polyurethane (PU) and linear poly(hydroxyethyl methacrylate) (PHEMA) have been investigated. The free energies of mixing of the semi‐IPN components have been determined by the vapour sorption method and it was established that the parameters are positive and depend on the amount of PHEMA in the semi‐IPN samples. Thermal analyses glass transition temperatures evidenced two in the semi‐IPNs in accordance with the investigation of the thermodynamic miscibility of these systems. Dynamic mechanical analysis revealed a pronounced change in the viscoelastic properties of the PU‐based semi‐IPNs with different amounts of PHEMA in the samples. The semi‐IPNs have two distinct tan δ maxima related to the relaxations of the two polymers in their glass temperature domains. The temperature position of PU relaxation maximum tan δ is invariable but its amplitude decreases in the semi‐IPNs with increasing amount of PHEMA in the systems. The tan δ maximum of PHEMA is shifted to a lower temperature and its amplitude decreases with increasing amount of PU in the semi‐IPNs. The segregation degree of components α was calculated using the viscoelastic properties of semi‐IPNs. It was concluded that the studied semi‐IPNs are two‐phase systems with incomplete phase separation. The different levels of immiscibility lead to the different degree of phase separation in the semi‐IPNs with compositions. Copyright © 2004 Society of Chemical Industry     

Characterization of hydrogels based on chitosan and copolymer of poly(dimethylsiloxane) and poly(vinyl alcohol)

Copolymers composed of poly(vinyl alcohol) (PVA) and poly(dimethylsiloxane) (PDMS) were crosslinked with chitosan to prepare semi‐interpenetrating polymer network (IPN) hydrogels by an ultraviolet (UV) irradiation method for application as potential biomedical materials. PVA/PDMS copolymer and chitosan was cast to prepare hydrogel films, followed by a subsequent crosslinking with 2,2‐dimethoxy‐2‐phenylacetophenone as a nontoxic photoinitiator by UV irradiation. Various semi‐interpenetrating polymer networks (semi‐IPNs) were prepared from different weight ratios of chitosan and the copolymer of PVA/PDMS. Photocrosslinked hydrogels exhibited an equilibrium water content (EWC) in the range of 65–95%. Swelling behaviors of these hydrogels were studied by immersion of the gels in various buffer solutions. Particularly, the PCN13 as the highest chitosan weight ratio in semi‐IPN hydrogels showed the highest EWC in time‐dependent and pH‐dependent swelling. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2591–2596, 2002     

Morphology,mechanical properties,and failure topography of semi‐interpenetrating polymer networks based on natural rubber and polystyrene

Semi‐interpenetrating networks (semi‐IPNs) were prepared from natural rubber (NR) and polystyrene (PS) by the sequential method. In these semi‐IPNs the NR phase was crosslinked while the PS phase was uncrosslinked. Different initiating systems such as dicumyl peroxide (DCP), benzoyl peroxide (BPO), and the azobisisobutyronitrile (AIBN) system were used for polymerizing the PS phase. The blend ratio was varied by controlling the swelling of NR in the styrene monomer. The mechanical properties of the semi‐IPNs, namely, density, tensile strength, tear strength, elongation at break, tension set, tensile set, impact strength, and hardness, were determined. The morphology of different IPNs was studied using scanning electron microscopy. A compact morphology with a homogeneous phase distribution was observed in the semi‐IPNs. The properties of the semi‐IPN do not change much with the initiating system. However, in most cases, the DCP initiating system showed slightly superior performance. The tensile and tear‐strength values of the IPNs were found to increase with increasing plastomer content. The crosslink density of the semi‐IPNs also increased with increase in the polystyrene content. The experimental values were compared with theoretical models such as series, parallel, Halpin Tsai, Coran, Takayanaki, Kerner, and Kunori. The tensile and tear‐fracture surfaces were examined using a scanning electron microscope. The fracture patterns were correlated with the strength and nature of the failure. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2327–2344, 2000     

Mechanical and dynamic mechanical studies of resol/vinyl acetate‐2‐ethylhexylacrylate/ hexamethoxymethylmelamine interpenetrating network systems

Resol was solution blended with vinyl acetate–2‐ethylhexylacrylate (VAc–EHA) resin in aqueous medium, in varying weight fractions, with hexamethoxymethylmelamine (HMMM) as crosslinker, and data was compared with a control. The present work was aimed at getting an optimum combination of tensile strength, dynamic mechanical strength, impact strength, and toughness by synthesis of an interpenetrating network (IPN) of the resins. The control gave a semi‐IPN system, in which the resol crosslinked, while the acrylic did not, whereas the blend, where HMMM was the crosslinker, gave a full IPN system. Full IPNs of the resol/VAc–EHA system had higher moduli and ultimate tensile strength than the semi‐IPNs. Dynamic mechanical study showed that full IPN systems have higher T_g values than semi‐IPN systems. The impact strength increases with increasing proportions of VAc–EHA copolymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1765–1771, 2003     

Insolubilization of sodium chondroitin sulfate by forming a semi‐interpenetrating polymer network with acrylic acid: A potential carrier for colon‐specific drug delivery

To reduce the highly hydrophilic property of chondroitin sulfate (ChS), a semi‐interpenetrating polymer network (semi‐IPN) of chondroitin sulfate/polyacrylic acid (PAA) was prepared as a drug carrier by crosslinking acrylic acid with diethyleneglycol diacrylate. The swelling properties of the semi‐IPNs with different concentrations of crosslinking agent were correlated. The moisture sorption profiles were evaluated using differential thermal analysis. Ketoprofen was used as a drug probe to evaluate the performance of the drug released from the semi‐IPN matrices. The prepared semi‐IPNs demonstrated significant swelling reduction properties with both gastric and intestinal fluids compared with those of both the pure ChS and the ChSAA blend without the crosslinking agent. The amount of accumulated drug released from the semi‐IPNs was less than 30 wt % at pH 1.2 and up to 80 wt % at pH 7.4. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 114–122, 2002     

Studies on engineering properties of PVC–PMMA semi‐interpenetrating polymer networks

Semi1 and semi2 interpenetrating polymer networks (IPNs) of PVC and in situ formed PMMA have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PMMA, respectively. These two types of IPNs have been compared w.r.t their physical, mechanical, and thermal properties and an endeavor has been made to find a correlation of these properties with the morphology generated in these systems. The semi1 IPNs displayed a decrease in their mechanical parameters and the physical properties as well, while in contrast, the semi2 IPNs exhibited a marginal increase in the corresponding values after an initial drop upto about 15% of crosslinked PMMA incorporation when compared to the crosslinked PVC in the case of semi1 IPN and linear PVC in the case of semi2 IPN. The various samples of semi1 and semi2 IPNs showed a two‐stage degradation typical of PVC, while confirming the increased stability with the samples having higher percentages of PMMA. The influence of crosslinking of the major matrix in semi1 IPN was almost counterbalanced by the influence of crosslinking in the dispersed PMMA phase in the case of semi2 IPN. The softening characteristics as detected by the extent of penetration of the probe, as has been detected by thermomechanical analysis, are in conformity with their mechanicals. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1725–1735, 2005     

Regulation of micromorphology and proton conductivity of sulfonated polyimide/crosslinked PNIPAm semi‐interpenetrating networks by hydrogen bonding

A series of novel sulfonated polyimide (SPI)/crosslinked poly(N‐isopropylacrylamide) (cPNIPAm) semi‐interpenetrating polymer networks (semi‐IPNs) were synthesized as the proton exchange membranes for direct methanol fuel cells via in situ polymerization. The micromorphology and properties of the semi‐IPN membranes were characterized. The results indicated that the hydrogen bonds between cPNIPAm and SPI in the semi‐IPN structure were a crucial factor for regulating the micromorphology, proton conductivity and other properties of the semi‐IPN membranes. A more uniform sulfonic ionic cluster distribution was observed in the membrane of SPI‐20‐cPNIPAm with equimolar ratio of sulfonic acid groups and amido bonds, which could provide effective proton transport channels. The SPI‐20‐cPNIPAm exhibited a maximum proton conductivity of 0.331 S cm^?1 at 80 ^oC (relative humidity 100%), an optimal selectivity of 8.01 × 10⁵ S s cm^?3 and an improved fuel cell performance of 72 mW cm^?2 compared with both pristine SPI and other semi‐IPN membranes. The SPI‐20‐cPNIPAm semi‐IPN membranes also retained good mechanical properties and thermal stabilities on the whole. © 2014 Society of Chemical Industry     

Phase separation in the polyurethane/poly(2‐hydroxyethyl methacrylate) semi‐interpenetrating polymer networks synthesized by different ways

The thermal, dynamic mechanical analysis, morphology and mechanical properties of semi‐interpenetrating polymer networks based on crosslinked polyurethane (PU) and poly(2‐hydroxyethyl methacrylate) (PHEMA) synthesized by photopolymerization and by thermopolymerization have been investigated. The thermal analysis has evidenced the two glass temperature transitions in the semi‐IPNs and this is confirmed by the thermodynamic miscibility investigation of the systems. The Dynamic Mechanical Analysis spectra have shown that the phase separation is more significant in the thermopolymerized semi‐IPNs: the tan δ peaks of constituent polymers are more distinct and the minimum between the two peaks is deeper. The calculated segregation degree values of semi‐IPN's components are significantly higher for thermopolymerized semi‐IPNs, thereby the process of phase separation in the thermopolymerized semi‐IPNs is more developed. The structures of two series of samples investigated by SEM are completely different. The mechanical properties reflect these changes in structure of semi‐IPNs with increasing amount of PHEMA and with the changing of the method of synthesis. The results suggest that the studied semi‐IPNs are two‐phase systems with incomplete phase separation. The semi‐IPN samples with early stage of phase separation demonstrate higher mechanical characteristics. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Water and temperature response of semi‐IPN hydrogels composed of chitosan and polyacrylonitrile

Temperature‐responsive semi‐interpenetrating polymer networks (semi‐IPNs) constructed with chitosan and polyacrylonitrile (PAN) were crosslinked with glutaraldehyde. The semi‐IPN determined the sorption behavior of water at several temperatures and at a relative humidity (RH) of 95% using a dynamic vapor sorption (DVS) system. Water diffusion coefficients of semi‐IPNs were calculated according to the Fickian Law at several temperatures and exhibited a relatively water uptake, 0.1–0.4 at room temperature. The water uptake of hydrogels depended on temperature. The apparent activation energy was dependent of the composition of the semi‐IPN with value of 32.8–34.8 kJmol^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 12: 2721–2724, 2003     

Conducting IPN Based on Polyaniline and Crosslinked Cellulose

Polyaniline/crosslinked cellulose conductive interpenetrating polymer networks (IPNs) were prepared by oxidative polymerization of aniline within the self-synthesized cellulose network using ammonium persulphate as oxidant. The conductivity of the IPN increases and then decreases with decrease in the aniline/(NH₄)₂S₂O₈ ratio, with increase in the HCl/aniline ratio, with increase in aniline content, as well as with increase in reaction time. In addition, the conductivity of the films strongly depends on the amount of tetraethyl orthosilicate crosslinker. In comparison with polyaniline/cellulose acetate composites, the conductivity increases by an order of one to two magnitudes in spite of the lower polyaniline content in this work. © of SCI.     

Synthesis and characterization of sequential interpenetrating polymer networks of novolac resin and poly(ethyl acrylate)

Interpenetrating polymer networks (IPN) of Novolac/poly(ethyl acrylate) have been prepared via in situ sequential technique of IPN formation. Both full and semi IPNs were characterized with respect to their mechanical properties that is, ultimate tensile strength (UTS), percentage elongation at break, modulus, and toughness. Physical properties of these were evaluated in terms of hardness, specific gravity, and crosslink density. Thermal behavior was studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The morphological features were observed by an optical microscope. There was a gradual decrease in modulus and UTS, with consequent increases in elongation at break and toughness for both types of IPNs with increasing proportions of PEA. An inward shift and lowering (with respect to pure phenolic resin) of the glass transition temperatures of the IPNs with increasing proportions of PEA were observed, thus, indicating a plasticizing influence of PEA on the rigid, brittle, and hard matrix of crosslinked phenolic resin. The TGA thermograms exhibit two‐step degradation patterns. An apparent increase in thermal stability at the initial stages, particularly, at lower temperature regions, was followed by a substantial decrease in thermal stability at the higher temperature region under study. As expected, a gradual decrease in specific gravity and hardness values was observed with increase in PEA incorporation in the IPNs. A steady decrease in crosslink densities with increase in PEA incorporation was quite evident. The surface morphology as revealed by optical microscope clearly indicates two‐phase structures in all the full and semi IPNs, irrespective of acrylic content. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Modification of the mechanical and thermal properties of PVC by semi IPN formation with poly(butyl acrylate)

Semi1 and semi2 interpenetrating polymer networks of poly(vinyl chloride) PVC and in situ formed poly(butyl acrylate) (PBA) have been synthesized and characterized using diallyl phthalate (DAP) and ethylene glycol dimethacrylate (EGDM) as the crosslinkers of PVC and PBA, respectively. These two types of IPNs have been compared with respect to their mechanical and thermal properties. The semi1 IPNs displayed a decrease in their mechanical parameters and the physical properties as well, while in contrast, the semi2 IPNs exhibited a marginal increase in the corresponding values when compared to the crosslinked PVC in the case of semi1 IPN and linear PVC in case of semi2 IPN. The representative samples of semi1 and semi2 IPNs revealed a two‐stage‐degradation typical of PVC while confirming the increased stability of the samples with higher onset temperature of degradation. The softening characteristics as detected by thermomechanical analysis are in conformity with their mechanicals. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

pH/temperature‐responsive semi‐IPN hydrogels composed of alginate and poly(N‐isopropylacrylamide)

Amino semitelechelic poly(N‐isopropylacrylamide) (PNIPAAm) was prepared by radical polymerization with aminoethanethiol hydrochloride as a chain‐transfer agent. Semi‐interpenetrating polymer network (semi‐IPN) hydrogels, composed of alginate and amine‐terminated PNIPAAm, were prepared by crosslinking with calcium chloride. From the swelling behaviors of semi‐IPNs at various pH's and Fourier transform infrared spectra at high temperatures, the formation of a polyelectrolyte complex was confirmed from the reaction between carboxyl groups in alginate and amino groups in modified PNIPAAm. Semi‐IPN hydrogels reached an equilibrium swelling state within 24 h. The water state in hydrogels, investigated by differential scanning calorimetry, showed that sample CAN55 [alginate/PNIPAAm (w/w) = 50/50] exhibited the lowest equilibrium water content and free water content among the hydrogels tested, which was attributed to its more compact structure compared to other samples and the high content of interchain bonding within the hydrogels. Alginate/PNIPAAm semi‐IPN hydrogels exhibited a reasonable sensitivity to the temperature, pH, and ionic strength of swelling medium. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1128–1139, 2002     

Semi‐interpenetrating polymer networks based on polyurethane and poly(vinyl pyrrolidone) obtained by photopolymerization: Structure‐property relationships and bacterial adhesion

A range of semi‐interpenetrating polymer networks (semi‐IPNs) based on polyurethane (PU) and poly(vinyl pyrrolidone) (PVP) have been synthesized and characterized with respect to their thermodynamic characteristics, morphology, mechanical properties, surface properties, water sorption and bacterial adhesion. The free energies of mixing of PU and PVP in semi‐IPNs have been determined by the vapor sorption method and were shown to be positive for all compositions. The surface properties of semi‐IPNs were investigated using the dynamic contact angle analysis. It was shown that the advancing contact angle changes from 83.1° to 65.3° with increasing PVP from 7.05% to 57.38%. Scanning electron microscopy demonstrated that the semi‐IPNs are two‐phase systems with incomplete phase separation. The mechanical properties reflect the changes in structure of semi‐IPNs with increasing of amounts of PVP in the system. Incorporation of PVP into the semi‐IPN with PU restricts the ability of PVP to sorb water. As infection is likely to be caused by bacterial adherence to biomedical implants, the bacterial adhesion data suggests that the semi‐IPNs with PVP content below 22.52% may be useful for biomedical material applications. Polym. Eng. Sci. 44:940–947, 2004. © 2004 Society of Plastics Engineers.     

Semi‐IPN asymmetric membranes based on polyether imide (ULTEM) and polyethylene glycol diacrylate for gaseous separation

Semi‐interpenetrating polymer networks (semi‐IPN) formed with commercial polyether imide (ULTEM®, PEI) and poly (ethylene glycol) diacrylate (PEGDA) were used to make asymmetric membranes. The effect of increasing amount of PEGDA on the bulk and the gas separation properties of semi‐IPN membranes were studied. The formation of IPNs was confirmed by Fourier Transform Infra Red (FT‐IR) spectroscopy. The 5% weight loss temperature decreased and the percent weight loss of the first step increased with increase in the PEGDA content, which indicated the incorporation of more poly (ethylene glycol) (PEG) segments to the semi‐IPNs. The microscopic experiments revealed the change in morphology with change in PEGDA content. The Scanning electron micrographs exhibited typical finger‐like voids in the sub layer, which is characteristic morphology of asymmetric membranes. The increase in PEGDA content up to 5.7 wt % increased the CO₂/N₂ selectivity of the semi‐IPN after which the selectivity decreased and permeance increased. Although, the increase in the polar poly (ethylene glycol) molecules is expected to render better CO₂ selectivity, the performance of the membrane was found to decrease as PEGDA content exceeded 5.7% for the given ratio. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Semi‐interpenetrating polymer networks based on polyurethane and polyvinylpyrrolidone. II. Dielectric relaxation and thermal behaviour

Semi‐interpenetrating polymer networks (semi‐IPNs) based on crosslinked polyurethane (PU) and linear polyvinylpyrrolidone (PVP) were synthezised, and their thermal and dynamic mechanical properties and dielectric relaxation behavior were studied to provide insight into their structure, especially according to their composition. The differential scanning calorimetry results showed the glass transitions of the pure components: one glass‐transition temperature (T_g) for PU and two transitions for PVP. Such glass transitions were also present in the semi‐IPNs, whatever their composition. The viscoelastic properties of the semi‐IPNs reflected their thermal behavior; it was shown that the semi‐IPNs presented three distinct dynamic mechanical relaxations related to these three T_g values. Although the temperature position of the PU maximum tan δ of the α‐relaxation was invariable, on the contrary the situation for the two maxima observed for PVP was more complex. Only the maximum of the highest temperature relaxation was shifted to lower temperatures with decreasing PVP content in the semi‐IPNs. In this study, we investigated the molecular mobility of the IPNs by means of dielectric relaxation spectroscopy; six relaxation processes were observed and indexed according the increase in the temperature range: the secondary β‐relaxations related to PU and PVP chains, an α‐relaxation due to the glass–rubber transition of the PU component, two α‐relaxations associated to the glass–rubber transitions of the PVP material, and an ionic conductivity relaxation due to the space charge polarization of PU. The temperature position of the α‐relaxation of PU was invariable in semi‐IPNs, as observed dynamic mechanical analysis measurements. However, the upper α‐relaxation process of PVP shifted to higher temperatures with increasing PVP content in the semi‐IPNs. We concluded that the investigated semi‐IPNs were two‐phase systems with incomplete phase separation and that the content of PVP in the IPNs governed the structure and corresponding properties of such systems through physical interactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1191–1201, 2003     

Conductive IPN based on polyaniline and silicon‐crosslinked styrene‐isoprene‐styrene triblock copolymer

A series of new conducting interpenetrating polymer networks (IPNs) are prepared by sequential crosslinking reactions of tetraethyl orthosilicate with silicon‐grafted functional styrene‐isoprene‐styrene triblock copolymer (SIS) and polyaniline (PANI) doped with dodecylbenzenesulfonic acid (DBSA). The various factors affecting the properties of conductive IPNs are investigated. The conductivity is found to increase only slightly after the IPN films are treated at 140 ° C . The thermal stability of the IPNs is much better than that of the pure polymer under nitrogen atmosphere, as shown by the results from thermal gravimetry analysis (TGA). © 1999 Society of Chemical Industry