Stereocomplexation of solvent‐cast poly(lactic acid) by addition of non‐solvents

Equimolar blends of poly(L ‐lactic acid) (PLLA) and poly(D ‐lactic acid) (PDLA) were obtained by solution casting from chloroform/methanol mixed solvents and analyzed using wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and polarizing optical microscopy. Chloroform and methanol are a solvent and non‐solvent, respectively, for poly(lactic acid). The WAXD and DSC results showed that stereocomplex crystallization between PLLA and PDLA occurred in addition to homo‐crystallization. On adding methanol to the casting solution, the stereocomplexation was gradually enhanced while the homo‐crystallization was suppressed. When a large amount of methanol was added, the homo‐crystallization was fully suppressed and the degree of stereocomplex crystallinity reached 90%. Similar results were obtained when another non‐solvent, hexane, was added to the casting solution in place of methanol. The effect of the addition of good and poor solvents such as tetrahydrofuran, ethanol, acetone and ethyl acetate was also studied. Copyright © 2011 Society of Chemical Industry     

Effect of multi‐branched PDLA additives on the mechanical and thermomechanical properties of blends with PLLA

Stereocomplex formation between poly(l ‐lactic acid) (PLLA) and poly(d ‐lactic acid) (PDLA) in the melt state was investigated and altered via the addition of multi‐branched poly(d ‐lactide) (PDLA) additives. Two different multi‐branched PDLA additives, a 3‐arm and 4‐arm star‐shaped polymeric structure, were synthesized as potential heat resistance modifiers and incorporated into PLLA at 5, 10, and 20 (w/w) through melt blending. Mechanical and thermomechanical properties of these blends were compared with linear poly(l ‐lactide) (PLLA) as well as with blends formed by the addition of two linear PDLA analogs that had similar molecular weights to their branched counterparts. Blends with linear PDLA additives exhibited two distinct melting peaks at 170–180°C and 200–250°C which implied that two distinct crystalline domains were present, that of the homopolymer and that of the stereocomplex, the more stable crystalline structure formed by the co‐crystallization of both d ‐ and l ‐lactide enantiomers. In contrast, blends of PLLA with multi‐branched PDLA formed a single broad melting peak indicative of mainly formation of the stereocomplex, behavior which was confirmed by X‐ray diffraction (XRD) analysis. The heat deflection temperature determined by thermal mechanical analysis was improved for all blends compared to neat PLLA, with increases of up to180°C for 20% addition of the 3‐arm PLLA additive. Rheological properties of the blends, as characterized by complex viscosity (η*), remained stable over a wide temperature range. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42858.     

Crystallisation and spherulite morphology of polylactide stereocomplex

In this study we investigated the crystallisation behaviours of stereocomplex crystals in poly(l ‐lactic acid)/poly(d ‐lactic acid) ( PLLA/PDLA) blends (LD blends) of various weight ratios. The crystallisation and melting behaviours were studied using DSC, and the crystal structure was analysed through wide‐angle X‐ray diffraction. The morphology of homocrystals and stereocomplex crystals in the blends was examined using a hot‐stage polarising microscope and a scanning electron microscope. The DSC results showed that homocrystals and stereocomplex crystals were present in all LD blends except that with 50 wt% PLLA/50 wt% PDLA; in this blend, only stereocomplex crystals were present. The regime II → III transition temperature of stereocomplex crystals in a Lauritzen–Hoffman plot of the LD blends was determined to be 165 °C. A concentric spherulite consisting of stereocomplex crystals and homocrystals formed under two‐step isothermal crystallisation conditions with three growth stages was observed. The confined spherulitic growth rate in the concentric spherulite and the unrestricted spherulitic growth rate in individual spherulites were also analysed. © 2018 Society of Chemical Industry     

Properties of a poly(L‐lactic acid)/poly(D‐lactic acid) stereocomplex and the stereocomplex crosslinked with triallyl isocyanurate by irradiation

A poly(L ‐lactic acid) (PLLA)/poly(D ‐lactic acid) (PDLA) stereocomplex was prepared from an equimolar mixture of commercial‐grade PLLA and PDLA by melt processing for the first time. Crosslinked samples were obtained by the radiation‐induced crosslinking of the poly(lactic acid) (PLA) stereocomplex mixed with triallyl isocyanurate (TAIC). The PLA stereocomplex and its crosslinked samples were characterized by their gel behavior, thermal and mechanical measurements, and enzymatic degradation. The crosslinking density of the crosslinked stereocomplex was described as the gel fraction, which increased with the TAIC content and radiation dose. The maximum crosslinking density was obtained in crosslinked samples of PLA/3% TAIC and PLA/5% TAIC irradiated at doses higher than 30 kGy. The stable crosslinking networks that formed in the irradiated PLA/TAIC substantially suppressed the segmental mobility for the crystallization of single crystals as well as stereocomplex crystals. The crosslinking network also significantly improved the mechanical properties and inhibited the enzymatic degradation of crosslinked PLA/3% TAIC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Enhanced toughness and strength of poly (d‐lactide) by stereocomplexation with 5‐arm poly (l‐lactide)

The enhancement of mechanical properties were achieved by solution blending of poly(d ‐lactide) (PDLA) and 5‐arm poly(l ‐lactide) (5‐arm PLLA). Differential scanning calorimetry (DSC) and wide‐angle X‐ray diffraction (WAXD) results indicated almost complete stereocomplex could be obtained when 5‐arm PLLA exceeded 30wt %. Tensile test results showed that the addition of 5‐arm PLLA in linear PDLA gave dramatically improvement both on tensile strength and elongation at break, which generally could not be increased simultaneously. Furthermore, this work transformed PDLA from brittle polymer into tough and flexible materials. The mechanism was proposed based on the TEM results: the stereocomplex crystallites formed during solvent evaporation on the blends were small enough (100–200 nm), which played the role of physical crosslinking points and increased the interaction strength between PDLA and 5‐arm PLLA molecules, giving the blends high tensile strength and elongation at break. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42857.     

Stereocomplex formation between enantiomeric PLA–PEG–PLA triblock copolymers: Characterization and use as protein‐delivery microparticulate carriers

Two enantiomeric triblock ABA copolymers composed of poly(L ‐lactide)–poly(ethylene glycol)–poly(L ‐lactide) (PLLA–PEG–PLLA) and poly(D ‐lactide)–poly(ethylene glycol)–poly(D ‐lactide) (PDLA–PEG–PDLA) were synthesized with two different middle‐block PEG chain lengths by ring‐opening polymerization of L ‐lactide and D ‐lactide in the presence of PEG, respectively. A pair of enantiomeric triblock copolymers were combined to form a stereocomplex by a solvent‐casting method. The triblock copolymers and their stereocomplexes were characterized by ¹H‐ and ¹³C‐NMR spectroscopy and gel permeation chromatography. Their crystalline structures and crystalline melting behaviors were analyzed by the wide‐angle X‐ray diffraction method and differential scanning calorimetry. The stereocomplex formed between a pair of enantiomeric triblock copolymers exhibited a higher crystalline melting temperature with a distinctive 3/1 helical crystalline structure. PLLA–PEG–PLLA and its stereocomplex with PDLA–PEG–PDLA were used to fabricate a series of microspheres encapsulating a model protein drug, bovine serum albumin (BSA). They were prepared by a double‐emulsion solvent‐evaporation method. The morphological aspects of the microspheres were characterized and BSA release profiles from them were investigated. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1615–1623, 2000     

Morphology and thermal properties of poly(L‐lactic acid)/organoclay nanocomposites

A modified clay was used to prepare poly(L ‐lactic acid)/clay nanocomposite dispersions. X‐ray diffraction and transmission electron microscopy experiments revealed that poly(L ‐lactic acid) was able to intercalate the clay galleries. IR spectra of the poly(L ‐lactic acid)/clay nanocomposites showed the presence of interactions between the exfoliated clay platelets and the poly(L ‐lactic acid). Thermogravimetric analysis and differential scanning calorimetry were performed to study the thermal behavior of the prepared composites. The properties of the poly(L ‐lactic acid)/clay nanocomposites were also examined as functions of the organoclay content. The exfoliated organoclay layers acted as nucleating agents, and as the organoclay content increased, the crystallization temperature increased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Hydrogel‐forming agar‐graft‐PVP and κ‐carrageenan‐graft‐PVP blends: Rapid synthesis and characterization

Grafting of agar and κ‐carrageenan with polyvinylpyrrolidone (PVP, average molecular weight 10,000 D) in an aqueous medium at a pH of about 7 produced agar‐graft‐PVP and κ‐carrageenan‐graft‐PVP blends capable of forming hydrogels. The reaction was carried out with microwave irradiation in the presence of a water‐soluble initiator, potassium persulfate. Optimum microwave irradiation conditions for obtaining hydrogels of the grafted products were achieved. The structural characteristics and thermal stability of the grafted blends were studied by Fourier transform infrared, ¹³C‐NMR, and thermogravimetric analyses. Appearance of new IR bands at 1661, 1465, and 1426 cm^?1 in the grafted products indicated the insertion of PVP into the polysaccharide structure. Powder X‐ray diffraction studies revealed the enhanced crystallinity in the products compared to in the control polysaccharides as well as PVP. Agar and κ‐carrageenan were grafted to a considerable degree, with 62.5 E % and 125 G % for agar‐graft‐PVP and 65.5 E % and 131 G % for κ‐carrageenan‐graft‐PVP. Optical micrographs of the grafted blends indicated considerable changes in the morphology of the agar and the κ‐carrageenan, substantiating the X‐ray diffraction data. A plausible mechanism for the crosslinking of PVP to agar and κ‐carrageenan is proposed. These hydrogels exhibited enhanced water‐holding capacity despite weaker gel strength than that in the respective control polysaccharides. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3654–3663, 2006     

Relationship between the crystallization behavior of poly(ethylene glycol) and stereocomplex crystallization of poly(L‐lactic acid)/poly(D‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a good biomedical polymer material with wide applications. The addition of poly(ethylene glycol) (PEG) as a plasticizer and the formation of stereocomplex crystals (SCs) have been proved to be effective methods for improving the crystallization of PLLA, which will promote its heat resistance. In this work, the crystallization behavior of PEG and PLLA/poly(d ‐lactic acid) (PDLA) in PLLA/PDLA/PEG and PEG‐b‐PLLA/PEG‐b‐PDLA blends has been investigated using differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. Both SCs and homocrystals (HCs) were observed in blends with asymmetric mass ratio of PLLA/PDLA, while exclusively SCs were observed in blends with approximately equal mass ratio of PLLA/PDLA. The crystallization of PEG was only observed for the symmetric blends of PLLA_39k/PDLA_35k/PEG_2k, PLLA_39k/PDLA_35k/PEG_5k, PLLA_69k/PDLA_96k/PEG_5k and PEG‐b‐PLLA_31k/PEG‐b‐PDLA_27k, where the mass ratio of PLLA/PDLA was approximately 1/1. The results demonstrated that the formation of exclusively SCs would facilitate the crystallization of PEG, while the existence of both HCs and SCs could restrict the crystallization of PEG. The crystallization of PEG is related to the crystallinity of PLLA and PDLA, which will be promoted by the formation of SCs. © 2017 Society of Chemical Industry     

Thermal properties and miscibility of semi‐crystalline and amorphous PLA blends

The focus of this research is the study of the microstructures and miscibility at the interface between semi‐crystalline and amorphous PLAs [poly (l ‐lactic acid)(PLLA) with poly (l ,d ‐lactic acid)(PDLLA), respectively]. The blends are prepared through thermal processing (extrusion and hot‐pressing). To increase the area of interface between PDLLA and PLLA, the fibers from PLLA and PDLLA are used. Thermal and microstructures of the blends were studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM), dynamic thermogravimetric analysis(DMA), small‐angle X‐ray diffraction(SAXS) and wide‐angle X‐ray diffraction (WAXD). The two PLAs are miscible in molten state. However, phase separation is detected after various thermal treatments, with PDLLA being excluded from the regions of interlamellar PLLA regions when PDLLA content is low, as determined from X‐ray diffraction studies. The compatibility between the two PLAs is not perfect in the molten state, since enthalpies of the various blends at T_g are lower than any pure PLA material. The semi‐crystalline PLLA fiber can recrystallize alone in the molten amorphous PDLLA, and a higher nuclei density is observed at the interface. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41205.     

Synthesis and structure control of l‐lactic acid–glycolic acid copolymer by homo‐copolymerization

A two‐step direct melt copolymerization process of l ‐lactic acid (L ‐LA)/glycolic acid (GA) was developed: poly(l ‐lactic acid) (PLLA) and poly(glycolic acid) (PGA) with different molecular weight was first synthesized respectively by binary catalyst (tin chloride/p‐toluenesulfonic or tin chloride); and then poly(l ‐lactic‐co‐glycolic acid) (b‐PLGA) was produced by melt polymerization of the as‐prepared PLLA and PGA, wherein the composition and chain structure of b‐PLGA copolymers could be controlled by the molecular weight of PLLA. The chain structure and thermal properties of copolymers were studied by Wide‐angle X‐ray diffraction, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. In comparison with the random PLGA (r‐PLGA) synthesized by one‐step direct melt polymerization, the average l ‐lactic blocks length (L_LA) in b‐PLGA was longer while the average glycolic blocks length (L_GA) in b‐PLGA was shorter which further resulted in the improved crystallinity and thermostability. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41566.     

Fabrication of starch‐g‐poly(l‐lactic acid) biocomposite films: Effects of the shear‐mixing and reactive‐extrusion conditions

In this study, we developed a new approach for the fabrication of a green poly(l ‐lactic acid)‐grafted starch (St‐g‐PLA) copolymer and nanocomposite (St‐g‐PLA/organoclay)‐based films via shear‐mixing and reactive‐extrusion systems. The chemical and physical structures, thermal behavior, and morphology of the synthesized blends and some other parameters were examined by Fourier transform infrared spectroscopy and ¹³C cross‐polarization/magic angle spinning NMR spectroscopy, X‐ray diffraction, thermogravimetric analysis–derivative thermogravimetry, and scanning electron microscopy, respectively. Significant increases in the mechanical and permeability properties were evident in the high value of grafted poly(lactic acid) molar percentages and high exfoliation of organoclay. The biodegradability of films were investigated under aerobic composting conditions through the measurement of the temperature, moisture, pH, consumed O₂ value, and carbon dioxide produced. This new strategy mainly improved the good adhesion between both phases, and it was an interesting method for the production of environmentally friendly biocomposites that could easily be scaled up for commercial production with the potential for replacing petroleum‐based plastics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44490.     

Synthesis and characterization of cholic acid‐containing biodegradable hydrogels by photoinduced copolymerization

A cholic acid (CA)‐containing biodegradable hydrogel (PLA‐PEG‐PLA‐co‐MACAH) was synthesized from the photoinduced copolymerization of a CA‐modified methacrylate monomer (MACAH), bearing a spacer of hexane‐1,6‐diol spacer between the methacryloyl and the cholanoate moieties, and a macromonomer (PLA‐PEG‐PLA‐DA), bearing two acryloyl end groups derived from a poly(lactic acid)‐b‐poly(ethylene glycol)‐b‐poly(lactic acid) triblock copolymer. The structure of MACAH was confirmed by FTIR, ¹H‐NMR, and MS. The hydrogel PLA‐PEG‐PLA‐co‐MACAH was characterized by scanning electron microscopy and X‐ray diffraction. The experiment results showed that the swelling ratios of the hydrogels decreased with the increase of the CA fraction. The investigation on the in vitro degradation of the hydrogel showed that the CA‐containing hydrogels degraded much slower than the hydrogels without CA component. The bioactivity of the synthesized hydrogels was assessed by the simulated body fluid method. The observed formation of hydroxyapatite on the scaffold of the hydrogels indicated that the hydrogels possess good bioactivity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Toward environment‐friendly composites of poly(ε‐caprolactone) reinforced with stereocomplex‐type poly(l‐lactide)/poly(d‐lactide)

In this work, stereocomplex‐poly(l ‐ and d ‐lactide) (sc‐PLA) was incorporated into poly(ε‐caprolactone) (PCL) to fabricate a novel biodegradable polymer composite. PCL/sc‐PLA composites were prepared by solution casting at sc‐PLA loadings of 5–30 wt %. Differential scanning calorimetry (DSC) and wide‐angle X‐ray diffraction (WAXD) demonstrated the formation of the stereocomplex in the blends. DSC and WAXD curves also indicated that the addition of sc‐PLA did not alter the crystal structure of PCL. Rheology and mechanical properties of neat PCL and the PCL/sc‐PLA composites were investigated in detail. Rheological measurements indicated that the composites exhibited evident solid‐like response in the low frequency region as the sc‐PLA loadings reached up to 20 wt %. Moreover, the long‐range motion of PCL chains was highly restrained. Dynamic mechanical analysis showed that the storage modulus (E′) of PCL in the composites was improved and the glass transition temperature values were hardly changed after the addition of sc‐PLA. Tensile tests showed that the Young's modulus, and yield strength of the composites were enhanced by the addition of sc‐PLA while the tensile strength and elongation at break were reduced. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40208.     

High molecular weight poly (L‐lactic acid) clay nanocomposites via solid‐state polymerization

We propose here, a novel technique to synthesize high molecular weight (MW) poly (L ‐lactic acid)‐clay nanocomposite (PLACN), via solid state polymerization (SSP). We synthesize prepolymer of PLACN (pre‐PLACN) from both, L ‐lactic acid and L ‐lactide, as starting materials. Synthesis of pre‐PLACN from L ‐lactic acid is carried out via in situ melt polycondensation (MP) of L ‐lactic acid oligomer, followed by SSP, to achieve high MW PLACN (M_w ∼ 138,000 Da). In case of L ‐lactide as the starting material, we prepare L ‐lactide–clay intercalated mixture which yields moderate MW pre‐PLACN during subsequent ring opening polymerization (ROP). Interestingly, ROP is performed by using hydroxyl functionalized ternary catalyst system (L ‐lactide–Sn(II) octoate–oligo (L‐lactic acid) complex), which provides the terminal hydroxyl end‐groups, required for step‐growth SSP. Pre‐PLACN MW is now increased to M_w ∼ 127,000 Da, by the subsequent SSP process. ¹H NMR analyses confirm that these end‐groups, are indeed consumed during SSP. During SSP, the PLACN also achieves up to 90% crystallinity, which may be due to the synchronization of the slow step‐growth SSP of poly(L ‐lactic acid) (PLA) with the crystallization kinetics. Optical purity of PLACNs is similar to that of neat PLA, whereas the thermal stability of PLACNs is significantly superior. As evidenced by wide‐angle X‐ray scattering/small‐angle X‐ray scattering analyses and in line with the literature, both, intercalated and exfoliated PLACN morphologies, have been synthesized, by suitable selection of clays. We also verify the correlation between the PLA semicrystalline morphology and the PLACN morphology, which is consistent with those of PLACN synthesized by other techniques. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Micro‐ and nanostructures of polylactide stereocomplexes and their biomedical applications

The discovery of stereocomplexation, secondary interaction between enantiomeric poly(l ‐lactide) (PLLA) and poly(d ‐lactide) (PDLA) provides a method for the creation of novel biomaterials with distinctive chemical and physical stability. Stereocomplexation opens a new way for the preparation of diverse micro‐ and nanostructures such as uniform microspheres, hollow particles, micelles, nanocrystals, nanofibres, nanotubes and polymerosomes. Herein, we describe the design of stereocomplex assemblies for specific applications and methods for their preparation. This review focuses primarily on the use of stereocomplex assemblies in biomedical applications due to the improved stability and physicochemical properties in comparison to enantiomeric polylactides. To make the polylactide stereocomplexes soluble in water and, as a consequence, to improve compatibility with the human body, various amphiphilic copolymers with PLLA and PDLA enantiomeric segments can be prepared. Stereocomplexation can facilitate their self‐assembly into micro‐ and nanoparticles, stabilize the particle size and morphology and can also have an influence on the in vivo degradation rate and cytotoxicity of these materials. Stimuli‐responsiveness in stereocomplex assemblies can be achieved by copolymerization of lactide with, for example, thermoresponsive N‐isopropylacrylamide or amino acids with pH‐sensitive pendant groups. Stereocomplex micro‐ and nanoparticles are used for encapsulation of various bioactive compounds: anticancer drugs, antibiotics and proteins. Finally, examples of materials in which high thermal and mechanical stabilities delivered as a result of stereocomplexation play a crucial role, i.e. hydrogels, nanofibres, microcellular foams and artificial skin, are described. The preparation of biomaterials and biomedical systems based on polylactide stereocomplex assemblies opens new opportunities in this field. © 2015 Society of Chemical Industry     

Crystallization of poly(3‐hydroxybutyrate) with stereocomplexed polylactide as biodegradable nucleation agent

Crystallization kinetics behavior and morphology of poly(3‐hydroxybutyrate) (PHB) blended with of 2–10 wt% loadings of poly(L ‐ and D ‐lactic acid) (PLLA and PDLA) stereocomplex crystallites, as biodegradable nucleating agents, were studied using differential scanning calorimetry, polarizing‐light optical microscopy (POM), and wide‐angle X‐ray diffraction (WAXD). Blending PLLA with PDLA at 1:1 weight ratio led to formation of stereocomplexed PLA (sc‐PLA), which was incorporated as small crystalline nuclei into PHB for investigating melt‐crystallization kinetics. The Avrami equation was used to analyze the isothermal crystallization of PHB. The stereocomplexed crystallites acted as nucleation sites in blends and accelerated the crystallization rates of PHB by increasing the crystallization rate constant k and decreasing the half‐time (t_1/2). The PHB crystallization was nucleated most effectively with 10 wt% stereocomplexed crystallites, as evidenced byPOM results. The sc‐PLA complexes (nucleated PHB crystals) exhibit much small spherulite sizes but possess the same crystal cell morphology as that of neat PHB based on the WAXD result. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

A novel amphoteric,pH‐sensitive,biodegradable poly[chitosan‐g‐(L‐lactic‐co‐citric) acid] hydrogel

The novel amphoteric, pH‐sensitive, biodegradable poly([chitosan‐g‐(L ‐lactic‐co‐citric) acid]) hydrogel (CLC) was synthesized through the reaction of chitosan (CS) with poly(L ‐lactic‐co‐citric acid) (PLCA). The structure of CLC was characterized by Fourier transform infrared spectroscopy, elemental analysis, and wide‐angle X‐ray diffraction measurement. The degree of substitution of CS amino groups was evaluated from salicylaldehyde analysis. The swelling behavior of CLC film in an aqueous solution with various pHs and the apparent swelling kinetics were studied. The swelling mechanisms of CLC film in acidic and alkaline mediums are discussed. The results showed that CLC hydrogel had a higher degree of swelling in the pH range of 4 > pH > 8 and that the swelling rate order in different buffers was neutral > acidic > basic mediums. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3850–3854, 2003     

Stereocomplexation and morphology of enantiomeric poly(lactic acid)s with moderate‐molecular‐weight

The thermal behavior and spherulitic morphologies of poly(L ‐lactic acid) (PLLA)/poly(D ‐lactic acid) (PDLA) 1/1 blend with weight‐molecular‐weight of 10⁵ order, together with those of pure PLLA and PDLA, were investigated using differential scanning calorimetry and polarized optical microscopy. It was found that in the blend, stereocomplex crystallites could be formed exclusively or coexisted with homocrystallites depending on thermal history. Banded to nonbanded spherulitic morphological transition occurred for melt‐crystallized PLLA and PDLA, while the blend presented exclusively nonbanded spherulitic morphologies in the temperature range investigated. The spherulite growth of the blend occurred within a wider temperature range (≤180°C) compared with that of homopolymers (≤150°C), while the spherulite growth rates were comparable for both the blend and homopolymers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Regulation of the mechanical properties and heat resistance of the poly(l‐lactide‐co‐trimethylene carbonate) copolymer by the incorporation of a stereocomplex crystal and graphene oxide

Stereocomplex crystals of polylactide and graphene oxide (GO) were simultaneously used to regulate the mechanical properties and heat resistance of a poly(l ‐lactide‐co‐trimethylene carbonate) [P(LLA‐co‐TMC)] copolymer. The crystallization behaviors in the nonisothermal cold‐crystallization process of P(LLA‐co‐TMC)–poly(d ‐lactide) (PDLA) blends and P(LLA‐co‐TMC)–PDLA–GO composites were investigated by differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscopy. Data from the crystallization kinetics and the crystallization active energy indicated that GO both promoted nucleation and limited growth during the stereocomplex crystallization process. Three kind of samples (without crystallization, with low crystallinity, and with high crystallinity) were used to investigate the mechanical properties and heat resistance. We found a decrease in the elongation at break when the stereocomplex crystal and GO contents were increased, and this was accompanied by an improvement in the tensile strength. The change in the storage modulus value determined by dynamic mechanical analysis demonstrated that both the stereocomplex crystal and GO effectively improved the heat resistance. These results indicate that this study provided a new strategy for fabricating a P(LLA‐co‐TMC) copolymer with good comprehensive properties at was entirely different from common chemical crosslinking methods. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45248.