The study of surface segregation and the formation of gradient domain structure at the blend of poly(methyl methacrylate)/poly(dimethyl siloxane) graft copolymers and acrylate adhesive copolymers

The effect of siloxane chain length on surface segregation of poly(methyl methacrylate)‐grafted poly(dimethyl siloxane) (PMMA‐g‐PDMS)/poly(2‐ethylhexyl acrylate‐co‐acrylic acid‐co‐vinyl acetate) [P(2EHA‐AA‐VAc)] blends was investigated. The blends of PMMA‐g‐PDMS with P(2EHA‐AA‐VAc) showed surface segregations of PDMS components. The surface enrichments of PDMS in the blends depended significantly on the PDMS chain length. Also, this blend showed the gradient domain structure. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 375–380, 2003     

Surface modification of poly(vinyl chloride) with poly(methyl methacrylate)/poly(dimethyl siloxane) graft copolymers

X-ray photoelectron spectroscopy is used to study the surface segregation of siloxane in dilute blends of poly(methyl methacrylate)/poly(dimethyl siloxane) graft copolymers in poly(vinyl chloride)(PVC). The graft copolymers are found to be extremely efficient surface modifiers, which form, when added in amounts of 0.5% or more, a continuous siloxane overlayer on the surface of PVC. © 1995 John Wiley & Sons, Inc.     

Synthesis of poly(methyl methacrylate)-g-poly(dimethyl siloxane) graft copolymers via a miniemulsion process

Summary In this article, we describe the synthesis of a PMMA-g-PDMS graft copolymer via a miniemulsion process. A highly hydrophobic PDMS macromonomer was copolymerized in the presence of MMA. Latex particles were obtained with a high yield and a complete incorporation of the macromonomer by using AIBN as initiator, SDS as a surfactant and a PMMA-b-PEO block copolymer as a cosurfactant, with a given amount of methanol in order to reduce the interfacial tension. The characterization of the resulting latex by ¹H NMR and QELS evidenced the interest of such a process in order to copolymerize monomers with very different solubilities and to obtain directly a graft copolymer in aqueous dispersion. Received: 12 March 2001/ Revised version: 15 September 2001/ Accepted: 15 September 2001     

Fabrication and apparent kinetic study of poly(methyl methacrylate)/poly(octyl acrylate) and poly(octyl acrylate)/poly(methyl methacrylate) latex interpenetrating polymer networks

Two latex interpenetrating polymer networks (LIPNs) were synthesized with methyl methacrylate (MMA) and octyl acrylate (OA) as monomers, respectively. The apparent kinetics of polymerization for the LIPNs was studied. This demonstrates that network II does not have a nucleus formation stage. The monomers of network II were diffused into the latex particles of network I and then formed network II by in situ polymerization. It indicates that the polymerization of network I obeys the classical kinetic rules of emulsion polymerization. But the polymerization of network II only appears a constant‐rate stage and a decreasing‐rate stage. The apparent activation energies (E_a) of network I and network II of PMMA/POA were calculated according to the Arrhenius equation. The E_a values of POA as network I (62 kJ/mol) is similar to that of POA as network II PMMA/POA (60 kJ/mol). However, the E_a value of PMMA as network II POA/PMMA (105kJ/mol) is higher than that of PMMA as network I (61 kJ/mol). Results show that the E_a value of the network II polymerization is related to the properties of its seed latex. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Properties of mineral filled poly(lactic acid)/poly(methyl methacrylate) blend

This study examines the influence of three different minerals, that is, clay, calcium carbonate, and quartz on the physical, thermal, and mechanical properties of poly(lactic acid) (PLA)/poly(methyl methacrylate) blend. Rheological behavior and phase structure were initially studied by small-amplitude oscillatory shear rheology. Clay- and quartz-filled materials presented an increase in viscosity at low frequency associated with the presence of a yield stress. However, this behavior was not observed for calcium carbonate filled materials due to a matrix degradation effect. To elucidate this aspect, thermal stability and thermal properties were examined by thermogravimetric analysis and differential scanning calorimetry, showing that calcium carbonate promotes degradation of the PLA phase. No nucleating effect was observed in the presence of the minerals. Dynamical mechanical analysis and mechanical characterization revealed an increase of the overall softening temperature and, a reinforcing effect for clay- and quartz-based composites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46927.     

Synthesis and characterization of poly(butyl acrylate)/silica and poly(butyl acrylate)/silica/poly(methyl methacrylate) composite particles

Poly(butyl acrylate)/poly(methyl methacrylate) (PBA/PMMA) core–shell particles embedded with nanometer‐sized silica particles were prepared by emulsion polymerization of butyl acrylate (BA) in the presence of silica particles preabsorbed with 2,2′‐azobis(2‐amidinopropane)dihydrochloride (AIBA) initiator and subsequent MMA emulsion polymerization in the presence of PBA/silica composite particles. The morphologies of the resulting PBA/silica and PBA/silica/PMMA composite particles were characterized, which showed that AIBA could be absorbed effectively onto silica particles when the pH of the dispersion medium was greater than the isoelectric potential point of silica. The critical amount of AIBA added to have stable dispersion of silica particles increased as the pH of the dispersion medium increased. PBA/silica composite particles prepared by in situ emulsion polymerization using silica preabsorbed with AIBA showed higher silica absorption efficiency than did the PBA/silica composite particles prepared by direct mixing of PBA latex and silica dispersion or by emulsion polymerization in which AIBA was added after the mixing of BA and silica. The PBA/silica composite particles exhibited a raspberrylike morphology, with silica particles “adhered” to the surfaces of the PBA particles, whereas the PBA/silica/PMMA composite latex particles exhibited a sandwich morphology, with silica particles mainly at the interface between the PBA core and the PMMA shell. Subsequently, the PBA/silica/PMMA composite latex obtained had a narrow particle size distribution and good dispersion stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3425–3432, 2006     

Dynamic mechanical behavior of poly(vinyl chloride)/poly(methyl methacrylate) polymer blend

A poly(vinyl chloride) (PVC)/poly(methyl methacrylate) (PMMA) (80/20 w/w) polymer blend was studied by mechanical spectroscopy. Two relaxations can be distinguished: in the glassy state, a very large secondary relaxation in the range of 100 K to 325 K which results from the combination of secondary relaxations of PVC and PMMA; and only one main relaxation at 364 K associated to the glass rubber transition. The relaxation spectrum in the range of the β relaxation has been described by a relaxation time distribution function based upon a Gaussian function and a series-parallel model. The α relaxation was studied by means of a theoretical approach for the nonelastic deformation of polymers. We found that the miscibility of this blend appears to be a function of the observation scale: the PVC/PMMA blend is heterogeneous at the scale of molecular movements involved for the β relaxation process but homogeneous at the scale of the chain segments responsible for the α relaxation dynamics. © 1996 John Wiley & Sons, Inc.     

Nonaqueous poly(methyl methacrylate) dispersions: radical dispersion polymerization in the presence of AB block copolymers of polystyrene and poly(dimethyl siloxane)

Well defined AB block copolymers of polystyrene (PS) and poly(dimethyl siloxane) (PDMS) have been prepared with PS molecular weights in the range 8 800 to 43 600 and PDMS molecular weights in the range 2 400 to 48 000. Provided the PS and PDMS molecular weights have a ratio within the range 0.5 to 4.0, these block copolymers stabilize particles of poly(methyl methacrylate) in n-alkanes. The particle size over the range 0.1 to 0.5 μm may be varied by performing dispersion polymerizations of methyl methacrylate as a function of monomer content of the seed stage and as a function of the concentration, molecular weight and composition of the block copolymer. From silicon analyses of the poly(methyl methacrylate) particles, values of the surface area stabilized per PDMS chain were established. The results indicate complete surface coverage of the particles.     

Crystalline structures in ultrathin poly(ethylene oxide)/poly(methyl methacrylate) blend films

Amorphous poly(ethylene oxide)/poly(methyl methacrylate) (PEO/PMMA) blend films in extremely constrained states are meta-stable and phase separation of fractal-like branched patterns happens in them due to heterogeneously nucleated PEO crystallization by diffusion-limited aggregation. The crystalline branches are viewed flat-on with PEO chains oriented normal to the substrate surface, upon increasing PMMA content the branch width remains invariant but thickness increases. It is revealed that PMMA imposes different effects on PEO crystallization, i.e. the length and thickness of branches, depending on the film composition.     

Syntheses of polyamide-poly(methyl methacrylate) graft copolymers by polycondensation reactions of macromonomers

Summary Dicarboxyl-terminated macromolecular monomers (macromonomers) were synthesized by radical polymerization of methyl methacrylate in the presence of thiomalic acid as a chain transfer agent. This macromonomer and sebacic acid were condensed with diamines (p,p-diaminodiphenyl ether, p,p-diaminodiphenylmethane and m-phenylenediamine) by triphenylphosphitepyridine system. Thus, graft copolyamides of well-defined structure and composition were readily prepared. This is the first example of the polycondensation reactions of macromonomers.     

Poly(ethylene oxide)/poly(methyl methacrylate) blends: Influence of tacticity of poly(methyl methacrylate) on blend structure and miscibility

The influence of different configurations of poly(methyl methacrylate) on the miscibility and superstructure of poly(ethylene oxide)/poly(methyl methacrylate) (PEO/PMMA) blends was examined using small-angle X-ray scattering and differential scanning calorimetry. The blends prepared by solution casting were isothermally crystallized at 48°C. The miscibility, the melting behaviour, the glass transition temperature and the structural parameters of the blends were strongly dependent on the tacticity and blend composition. The small-angle X-ray intensity profiles were analysed using a recently developed methodology. For the poly(ethylene oxide)/atactic poly(methyl methacrylate) (PEO/APMMA) and poly(ethylene oxide)/syndiotactic poly(methyl methacrylate) (PEO/SPMMA) blends, the long period and the amorphous and transition region thicknesses increased with increase of PMMA content, whereas for the poly(ethylene oxide)/isotactic poly(methyl methacrylate) (PEO/IPMMA) blends they are independent of composition. The structural properties of the blends were attributed to the presence of non-crystallizable material in the interlamellar or interfibrillar regions, depending on PMMA tacticity. From the glass transition and melting temperatures, it has been supposed that one homogeneous amorphous phase is present in the case of PEO/APMMA and PEO/SPMMA blends and that the PEO/IPMMA amorphous system is phase-separated. The free-volume contribution to the energy of mixing for the various tactic PMMAs is hypothesized to be responsible for the difference in mixing behaviour.     

Effects of compatibilizing agents in poly(n-butyl acrylate)/poly(methyl methacrylate) composite latexes

Graft copolymers with poly(n-butyl acrylate) (PBA) backbones and poly(methyl methacrylate) (PMMA) macromonomer side chains are used as compatibilizing agents for PBA/PMMA composite latexes. The composite latexes are prepared by seeded emulsion polymerization of methyl methacrylate (MMA) in the presence of PBA particles. Graft copolymers were already incorporated into the PBA particles prior to using these particles as seed via miniemulsion (co)polymerization of n-butyl acrylate (BA) in the presence of the macromonomers. Comparison between size averages of composite and seed particles indicates no secondary nucleation of MMA during seeded emulsion polymerization. Transmission electron microscopy (TEM) observations of composite particles show the dependence of particle morphologies with the amount of macromonomer (i.e., mole ratio of macromonomer to BA and molecular weight of macromonomer) in seed latex. The more uniform coverage with the higher amount of macromonomer suggests that graft copolymers decrease the interfacial tension between core and shell layers in the composite particles. Dynamic mechanical analysis of composite latex films indicates the existence of an interphase region between PBA and PMMA. The dynamic mechanical properties of these films are related to the morphology of the composite particles, the arrangement of phases in the films, and the volume of the interphase polymer. © 1997 John Wiley & Sons, Inc.     

粒径可控的聚丙烯酸丁酯/聚甲基丙烯酸甲酯核壳乳液的制备及表征

采用种子乳液聚合法制备了聚丙烯酸丁酯(PBA)乳液,然后通过第二单体甲基丙烯酸甲酯的预溶胀法聚合制备了PBA/聚甲基丙烯酸甲酯(PMMA)乳液,用激光散射粒度仪和透射电子显微镜对乳液粒径和结构进行了表征.结果表明,当乳化剂十二烷基硫酸钠质量分数为丙烯酸丁酯的1.5%时,可制备粒径为53.6 nm且分布窄的PBA种子乳液;通过调整补加乳化剂、单体与种子乳液的用量,可制得粒径为53.6～443.8 nm的一系列单分散PBA乳液;PBA/PMMA乳液具有完善的核壳结构,且在核壳两相间存在着一个过渡层.     

Synthesis and characterization of starch‐poly(methyl methacrylate) graft copolymers

The graft copolymerization was carried out by methyl methacrylate with starch in which azobisisobutyronitrile was used as an initiator. The grafting reactions were carried out within a 65–95°C temperature range, and the effect of the monomer, initiator concentrations, and the amount of starch on the graft yield were also investigated. The maximum graft yield was obtained at a azobisisobutyronitrile concentration of 2.0 × 10^?3 mol/L. The overall rate activation energy of the reaction was found to be 89.42 kJ/mol. The grafted starches were characterized with infrared spectroscopy, scanning electron microscopy, and thermogravimetry. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 53–57, 2002     

Thermal analyses of graft copolymers of poly (methyl methacrylate) main chain with poly (propylene oxide-b-ethylene oxide) graft chain

Poly(methyl methacrylate-g-(propylene oxide-b-ethylene oxide)) and poly (methyl methacrylate-g-(ethylene oxide-b-propylene oxide)), comprising chemically dissimilar sequences, exhibit intramolecular phase separation. These compositions have applications in coatings and as surface-tension modifiers. This paper presents the thermal behavior of these graft copolymers: separate samples of the homopolymer and of the grafts were also analyzed to provide comparisons. The phase behavior has been analyzed by differential scanning calorimetry and by dynamic-mechanical thermal measurements. Two glass transitions (T_g) are observed, caused by the partial incompatibility within the copolymers. The activation energy of the T_g relaxation process of the main chain is decreased by the graft chain. The influence of poly(propylene oxide-b-ethylene oxide) grafts on the thermal degradation of the poly(methyl methacrylate) (PMMA) main chain was studied by using thermogravimetric analysis. Prolysis of the graft copolymers occurs in three stages and begins on the graft chain and at a lower temperature than the pyrolysis of pure PMMA. Both the phase behavior and the thermal stability are found to depend sensitively on the composition of the copolymer. © 1993 John Wiley & Sons, Inc.     

Stereocomplex formation in polybutadiene-syndiotactic poly(methyl methacrylate) block copolymers blended with isotactic poly(methyl methacrylate)

Summary The process of stereocomplexation in blends of isotactic poly(methyl methacrylate)s and polybutadiene-syndiotactic poly(methyl methacrylate) diblock copolymers was studied by differential scanning calorimetry as a function of molar mass of the constituents, annealing time and temperature. The amount of complex formed is dependent on these three parameters, while the temperature of decomposition of the complex is only dependent on the annealing temperature. Complex formation can be observed in blends containing a copolymer with a very low molar mass syndiotactic poly(methyl methacrylate) block (Mn=700). In contrast to homopolymer blends, for which two endotherms of decomposition were generally reported, only one endotherm is observed for copolymer-homopolymer blends. This behavior is attributed to the elastomer block.     

Compatibilization of poly(methyl acrylate) with poly(methyl methacrylate) through charge transfer interactions

Summary Copolymers of methyl acrylate (MA) with an electron-donor comonomer (N-vinylcarbazole) (NVC) are mixed with copolymers of methyl methacrylate (MMA) with a electron-acceptor comonomer (2-(3,5-dinitrobenzoyl) oxyethyl methacrylate) (DNBM) such that 1:1 mol ratios of NVC:DNBM are present at all times. The blends obtained are phase separated up to an average of 27 mol% donor/acceptor structural unit in the copolymer. Above 27 mol% perturbation, poly(MA) and poly(MMA) become compatible.     

Toughening effect of poly(methyl methacrylate) on an immiscible poly(vinylidene fluoride)/polylactide blend

In this work, a mutually miscible third polymer, poly(methyl methacrylate) (PMMA), was incorporated into an immiscible poly(vinylidene fluoride)/polylactide (PVDF/PLA) blend (weight ratio 70:30). It was found that incorporation of PMMA in an appropriate amount (30–60 wt%) induced a marked improvement in fracture toughness. A five times enlargement of the elongation at break can be achieved by introducing 30 wt% PMMA. In order to understand the underlying toughening mechanism, SEM, dynamic mechanical analysis (DMA), XRD and DSC were applied to study the variations in morphology, the interaction between the three components and the crystallization behavior. SEM micrographs showed that the PMMA preferred to locate at the interface of PVDF and PLA, which was attributed to the mutual miscibility of PVDF with PMMA and PLA. Furthermore, a variety of thermal characteristics such as T_g and T_m induced by the entanglement of PVDF, PMMA and PLA at the interface were illustrated in DMA and DSC curves. Obviously, the interface consisting of the entanglement of PVDF, PLA and PMMA acted as a linkage to improve interfacial adhesion, which was regarded as the main toughening mechanism. This work provides a potential strategy to realize the interfacial enhancement of an immiscible blend via the incorporation of a mutually miscible third polymer. © 2016 Society of Chemical Industry     

Temperature-dependent interaction parameters of poly(methyl methacrylate)/poly(2-vinyl pyridine) and poly(methyl methacrylate)/poly(4-vinyl pyridine) pairs

Temperature-dependent interaction parameters (α) of poly(methyl methacrylate)/poly(2-vinyl pyridine) (PMMA/P2VP) pair and PMMA/poly(4-vinyl pyridine) (PMMA/P4VP) pair were obtained from the SAXS profiles at various temperatures, and curve fitting to the random phase approximation theory. For this purpose, symmetric P2VP-block-PMMA and P4VP-block-PMMA copolymers were synthesized anionically. The molecular weights of both block copolymers were controlled to exhibit the disordered state over the entire experimental temperatures. We found that the value of α for PMMA/P4VP was larger than PMMA/P2VP, similar to polystyrene (PS)/poly(vinyl pyridine) pairs. However, the difference between in α between PMMA/P2VP and PMMA/P4VP was much smaller than that between PS/P2VP and PS/P4VP. This might be attributed to the hydrophilic PMMA block compared with hydrophobic PS block. Finally, the order-to-disorder transition temperature for symmetric P2VP-block-PMMA copolymers was determined by small angle X-ray scattering and birefringence methods.