Synthesis and characterization of butyl acrylate/methyl methacrylate/glycidyl methacrylate latexes

The butyl acrylate (BA)/methyl methacrylate (MMA), and glycidyl methacrylate (GMA) composite copolymer latex was synthesized by seeded emulsion polymerization technique taking poly(methyl methacrylate) (PMMA) latex as the seed. Four series of experiments were carried out by varying the ratio of BA : MMA (w/w) (i.e. 3.1 : 1, 2.3 : 1, 1.8 : 1, and 1.5 : 1) and in each series GMA content was varied from 1 to 5% (w/w). The structural properties of the copolymer were analyzed by FTIR, ¹H‐, and ¹³C‐NMR. Morphological characterization was carried out using transmission electron microscopy (TEM). In all the experiments, monomer conversion was ～99% and final copolymer composition was similar to that of feed composition. The incorporation of GMA into the copolymer chain was confirmed by ¹³C‐NMR. The glass transition temperature (T_g) of the copolymer latex obtained from the differential scanning calorimetry (DSC) curve was comparable to the values calculated theoretically. With increase in GMA content, particles having core‐shell morphology were obtained, and there was a decrease in the particle size as we go from 2–5% (w/w) of GMA. The adhesive strength of the latexes was found to be dependent on the monomer composition. With increase in BA : MMA ratio, the tackiness of the film increased while with its decrease the hardness of the film increased. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Study on copolymer emulsion containing an epoxy group

Methyl methacrylate, butyl acrylate, acrylic acid, and various amounts of glycidyl methacrylate (GMA) were copolymerized by a semicontinuous seeded emulsion copolymerization to be a four-component copolymer emulsion; the copolymers were characterized using swelling capacity, transmission electron microscopy (TEM), etc. The effect of glycidyl methacrylate and its content on the properties of emulsion and copolymer films was studied. The self-crosslinking reaction of the copolymer was investigated by FTIR and DSC. It was found that the swelling capacity of the crosslinked copolymer films decreased with increase of the glycidyl methacrylate content, the morphology showed a core–shell structure, and the copolymer emulsion possessed a self-crosslinking property. © 1995 John Wiley & Sons, Inc.     

Immobilization of Candida lipolytica lipase on macroporous beaded terpolymers with epoxy groups

A series of macroporous beaded terpolymers with epoxy groups were synthesized by suspension polymerization with glycidyl methacrylate (GMA), ethylene glycol dimethacrylate (EGDMA), and the third monomers including styrene, methyl methacrylate, n‐butyl acrylate (BA), butyl methacrylate (BMA), and 2‐hydroxyethyl methacrylate for immobilization of Candida lipolytica lipase. The effect of various third monomers on loading and activity recovery of immobilized lipase were studied. Terpolymers with BA as the third monomer were found to give the biggest loading of lipase, and the activity recovery of lipase immobilized on poly(GMA‐EGDMA‐BA) terpolymers reached 79.0%. As the content of BA (%) increasing, the loading of lipase enhanced, but the activity recovery reached 88.5% for the initial stage and decreased to 46.9% at last. The poly(GMA‐EGDMA‐BA‐10) showed an optimal result in lipase immobilization. Lipase immobilized on poly(GMA‐EGDMA‐BA‐10) carriers had broader pH and higher temperature stability. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

水性丙烯酸酯共聚物EVA表面处理剂的合成

采用乳液聚合法合成丙烯酸酯EVA表面处理剂,研究丙烯酸、丙烯酸丁酯、醋酸乙烯酯、丙烯腈和甲基丙烯酸缩水甘油酯等单体对丙烯酸酯EVA表面处理剂乳液性能的影响。所制备的丙烯酸酯EVA表面处理剂对交联程度低的EVA发泡鞋底具有良好的处理效果。     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002     

Thermal and sonochemical degradation kinetics of poly(n‐butyl methacrylate‐co‐alkyl acrylates): Variation of chain strength and stability with copolymer composition

The thermal degradation of poly(n‐butyl methacrylate‐co‐alkyl acrylate) was compared with ultrasonic degradation. For this purpose, different compositions of poly (n‐butyl methacrylate‐co‐methyl acrylate) (PBMAMA) and a particular composition of poly(n‐butyl methacrylate‐co‐ethyl acrylate) (PBMAEA) and poly(n‐butyl methacrylate‐co‐butyl acrylate) (PBMABA) were synthesized and characterized. The thermal degradation of polymers shows that the poly(alkyl acrylates) degrade in a single stage by random chain scission and poly(n‐butyl methacrylate) degrades in two stages. The number of stages of thermal degradation of copolymers was same as the majority component of the copolymer. The activation energy corresponding to random chain scission increased and then decreased with an increase of n‐butyl methacrylate fraction in copolymer. The effect of methyl acrylate content, alkyl acrylate substituent, and solvents on the ultrasonic degradation of these copolymers was investigated. A continuous distribution kinetics model was used to determine the degradation rate coefficients. The degradation rate coefficient of PBMAMA varied nonlinearly with n‐butyl methacrylate content. The degradation of poly (n‐butyl methacrylate‐co‐alkyl acrylate) followed the order: PBMAMA < PBMAEA < PBMABA. The variation in the degradation rate constant with composition of the copolymer was discussed in relation to the competing effects of the stretching of the polymer in solution and the electron displacement in the main chain. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Graft copolymers from commercial chlorinated polypropylene via Cu(0)‐mediated atom transfer radical polymerization

Commercially available chlorinated polypropylene has been used as a macroinitiator for the Cu(0)‐mediated atom transfer radical polymerization of methyl methacrylate and tert‐butyl acrylate to obtain well‐defined graft copolymers. The relatively narrow molecular weight distribution in the graft copolymers and linear kinetic plots indicated the controlled nature of the copolymerization reactions. Both Fourier transform infrared and ¹H NMR studies confirmed that the graft reactions had taken place successfully. After graft copolymer formation, tert‐butyl groups of poly(tert‐butyl acrylate) side chains were completely converted into poly(acrylic acid) chains to afford corresponding amphiphilic graft copolymers. © 2016 Society of Chemical Industry     

Polymer blends of poly(ethylene‐2,6‐naphthalate) with polystyrene compatibilized by styrene‐glycidyl methacrylate copolymers. I. Rheology,morphology, and mechanical properties

The compatibilization of blends of poly(ethylene‐2,6‐naphthalate) (PEN) with polystyrene (PS), through the styrene‐glycidyl methacrylate copolymers (SG) containing various glycidyl methacrylate (GMA) contents, was investigated in this study. SG copolymers are able to react with PEN terminal groups during melt blending, resulting in the formation of desirable SG‐g‐PEN copolymers in the blend. These in situ formed copolymers tend to reside along the interface preferentially as the result of interfacial reaction and thus function as effective compatibilizers in PEN/PS blends. The compatibilized blends exhibit higher viscosity, finer phase domain, and improved mechanical properties. It is found that the degree of grafting of the in situ formed SG‐g‐PEN copolymer has to be considered as well. In blends compatibilized with the SG copolymer containing higher GMA content, heavily grafted copolymers would be produced. The length of the styrene segment in these heavily grafted copolymers would be too short to penetrate deep enough into the PS phase to form effective entanglements, resulting in the lower compatibilization efficiency in PEN/PS blends. Consequently, the in situ formation of SG‐g‐PEN copolymers with an optimal degree of grafting is the key to achieving the best performance for the eventually produced PEN/PS blends through SG copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 967–975, 2003     

Compatibilization of polypropylene/ poly(3‐hydroxybutyrate) blends

Blending polypropylene (PP) with biodegradable poly(3‐hydroxybutyrate) (PHB) can be a nice alternative to minimize the disposal problem of PP and the intrinsic brittleness that restricts PHB applications. However, to achieve acceptable engineering properties, the blend needs to be compatibilized because of the immiscibility between PP and PHB. In this work, PP/PHB blends were prepared with different types of copolymers as possible compatibilizers: poly(propylene‐g‐maleic anhydride) (PP–MAH), poly (ethylene‐co‐methyl acrylate) [P(E–MA)], poly(ethylene‐co‐glycidyl methacrylate) [P(E–GMA)], and poly(ethylene‐co‐methyl acrylate‐co‐glycidyl methacrylate) [P(E–MA–GMA)]. The effect of each copolymer on the morphology and mechanical properties of the blends was investigated. The results show that the compatibilizers efficiency decreased in this order: P(E–MA–GMA) > P(E–MA) > P(E–GMA) > PP–MAH; we explained this by taking into consideration the affinity degree of the compatibilizers with the PP matrix, the compatibilizers properties, and their ability to provide physical and/or reactive compatibilization with PHB. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Super‐Tough and Highly‐Ductile Poly(l‐lactic acid)/Thermoplastic Polyurethane/Epoxide‐Containing Ethylene Copolymer Blends Prepared by Reactive Blending

Ethylene‐methyl acrylate‐glycidyl methacrylate copolymer (E‐MA‐GMA) is employed to improve the impact toughness of poly(l ‐lactic acid) (PLLA)/thermoplastic polyurethane (TPU) blends by reactive melt‐blending. The reaction and miscibility between the components are confirmed by Fourier transform infrared spectroscopy, dynamic mechanical analysis, and differential scanning calorimetry. A super‐tough PLLA/TPU/E‐MA‐GMA multiphase blend (75/10/15) exhibits a significantly improved impact strength of 77.77 kJ m^?2, which is more than 17 times higher than that of PLLA/TPU (90/10) blend. A co‐continuous‐like TPU phase structure involving E‐MA‐GMA phase at the etched cryo‐fractured surface and the high‐orientated matrix deformation at the impact‐fractured surface are observed by scanning electron microscopy. The high‐orientated matrix deformation induced by the co‐continuous TPU phase structure is responsible for the super toughness of PLLA/TPU/E‐MA‐GMA blends.     

Study on swelling behavior and pervaporation properties of AA–MMA–BA copolymers for separation of methanol/MTBE/C5 mixtures

In this study, the copolymers with different ratios of AA(acrylic acid)–MMA(methyl methacrylate)–BA (butyl acrylate) are synthesized to prepare pervaporation membrane for the separation of methanol/MTBE (methyl tert‐butyl ether)/C₅ mixtures. Swelling experiment of these copolymers in pure methanol, MTBE, C₅, and methanol/MTBE mixtures are carried out, respectively. The results show that there is a strong interaction between MTBE and copolymer with high content of BA. The pervaporation characteristics of the membranes prepared with different copolymer are measured in the separation of methanol/MTBE mixture. The experimental results show that the pervaporation ability changes with swelling degree in the same direction. The copolymers are characterized by FTIR. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2267–2271, 2003     

Surface modification of MWNTs with BA‐MMA‐GMA terpolymer by single‐step grafting technique

In this article, a facile strategy was developed to prepare BA‐MMA‐GMA/MWNTs (multiwalled carbon nanotubes) hybrid nanoparticles as nanofillers in rubber by single‐step grafting technique. First, a new macromolecular surface modifier butyl acrylate (BA)‐α‐methyl methacrylate(MMA)‐glycidyl methacrylate (GMA) terpolymer was synthesized via radical copolymerization. Afterward, this terpolymer modifier was covalently grafted onto the surface of crude MWNTs by single‐step grafting technique. The structure, surface properties, and thermal stability of modified MWNTs were systematically investigated by FTIR, TGA, and TEM. FTIR results showed that BA‐MMA‐GMA terpolymer was successfully grafted onto the surface of MWNTs. TGA indicated that the optimum mass fraction of macromolecular modifier coated on the surface of MWNTs was 9 wt %. TEM images revealed that an organic coating layer was formed and the modified MWNTs showed good dispersibility in acetone. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polymer blends of poly(trimethylene terephthalate) and polystyrene compatibilized by styrene‐glycidyl methacrylate copolymers

The compatibilizing effects of styrene‐glycidyl methacrylate (SG) copolymers with various glycidyl methyacrylate (GMA) contents on immiscible blends of poly(trimethylene terephthalate) (PTT) and polystyrene (PS) were investigated using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and ¹³C‐solid‐state nuclear magnetic resonance (NMR) spectroscopy. The epoxy functional groups in the SG copolymer were able to react with the PTT end groups (? COOH or ? OH) to form SG‐g‐PTT copolymers during melt processing. These in situ–formed graft copolymers tended to reside along the interface to reduce the interfacial tension and to increase the interfacial adhesion. The compatibilized PTT/PS blend possessed a smaller phase domain, higher viscosity, and better tensile properties than did the corresponding uncompatibilized blend. For all compositions, about 5% GMA in SG copolymer was found to be the optimum content to produce the best compatibilization of the blend. This study demonstrated that SG copolymers can be used efficiently in compatibilizing polymer blends of PTT and PS. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2247–2252, 2003     

Preparation and properties of core–shell nanosilica/poly(methyl methacrylate–butyl acrylate–2,2,2‐trifluoroethyl methacrylate) latex

A core–shell nanosilica (nano‐SiO₂)/fluorinated acrylic copolymer latex, where nano‐SiO₂ served as the core and a copolymer of butyl acrylate, methyl methacrylate, and 2,2,2‐trifluoroethyl methacrylate (TFEMA) served as the shell, was synthesized in this study by seed emulsion polymerization. The compatibility between the core and shell was enhanced by the introduction of vinyl trimethoxysilane on the surface of nano‐SiO₂. The morphology and particle size of the nano‐SiO₂/poly(methyl methacrylate–butyl acrylate–2,2,2‐trifluoroethyl methacrylate) [P(MMA–BA–TFEMA)] core–shell latex were characterized by transmission electron microscopy. The properties and surface energy of films formed by the nano‐SiO₂/P(MMA–BA–TFEMA) latex were analyzed by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy/energy‐dispersive X‐ray spectroscopy, and static contact angle measurement. The analyzed results indicate that the nano‐SiO₂/P(MMA–BA–TFEMA) latex presented uniform spherical core–shell particles about 45 nm in diameter. Favorable characteristics in the latex film and the lowest surface energy were obtained with 30 wt % TFEMA; this was due to the optimal migration of fluorine to the surface during film formation. The mechanical properties of the films were significantly improved by 1.0–1.5 wt % modified nano‐SiO₂. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

叔胺型丙烯酸酯共聚物乳液室温可见光交联研究

本研究以甲基丙烯酸甲酯、丙烯酸丁酯、N -羟甲基丙烯酰胺、甲基丙烯酸二甲氨基乙酯为共聚单体进行乳液聚合制备叔胺基丙烯酸酯共聚物乳液 ,然后在该共聚物乳液中加入光敏性乙烯基不饱和单体和可见光下分解的光敏引发剂 ,共混物涂膜于自然光下室温固化交联。考察了光敏引发剂用量、交联单体种类和用量、交联时间对乳胶膜交联程度的影响。结果表明 ,以异丙基硫杂蒽酮为光引发剂 ,分别以甲基丙烯酸缩水甘油酯、三丙二醇二丙烯酸酯及三羟甲基丙烷三丙烯酸酯为交联单体时 ,乳胶膜交联度在 0 5～ 1h内 >70 % ,2h内 >80 %。     

Blends of polylactic acid with thermoplastic copolyester elastomer: Effect of functionalized terpolymer type on reactive toughening

This study is an attempt to explore the effectiveness of thermoplastic copolyester elastomer (TPCE) as a toughening agent for improving the impact strength of PLA. Biobased Hytrel^® thermoplastic copolyester of polyether glycol and polybutylene terephthalate was selected as the TPCE of choice for this study. Blends of PLA/Hytrel at varying weight ratios were prepared using extrusion followed by injection molding technique. Optimal synergies of two polymers were found in the PLA/Hytrel (70/30) blend, showing impact strength of 234 J/m, a sixfold increase compared to neat PLA. In order to obtain further enhancement in toughness, different functionalized terpolymers were added to accomplish reactive compatibilization. A series of functionalized terpolymers, ethylene methyle acrylate‐glycidyl methacrylate (EMA‐GMA), ethylene butyl acrylate‐glycidyl methacrylate (EBA‐GMA), ethylene methyl acrylate‐maleic anhydride (EMA‐MaH), and ethylene butyl acrylate‐maleic anhydride (EBA‐MaH) were selected. Comparing PLA ternary blends with different terpolymers, GMA containing terpolymers showed better impact toughness compared to MaH terpolymer blends. Unique fracture surface morphology showing debonding cavitation and massive shear yielding in the ternary blends containing EMA‐GMA resulted in super toughened blends. Highest zero shear viscosity and storage modulus was also observed for ternary blends with EMA‐GMA. Under the processing conditions and blend ratio investigated, EMA‐GMA showed better efficiency in improving the toughness of the PLA blends. POLYM. ENG. SCI., 58:280–290, 2018. © 2017 Society of Plastics Engineers     

Synthesis of electroactive tetraaniline-based acrylic polyol by atom transfer radical polymerization for anticorrosive coating application

In this work, block copolymers of butyl acrylate and glycidyl methacrylate (GMA) having molecular weights 10,000 Da were synthesized with varied GMA block lengths by 10%, 20%, and 30% using atom transfer radical polymerization. The synthesized copolymers were further reacted with tetraaniline to formulate conductive polyol and further characterized by mass spectroscopy, UV–visible spectroscopy, ¹HNMR, and FTIR. The block copolymers formed were evaluated by gel permeation chromatography, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry, and nuclear magnetic resonance (NMR) techniques for structural elucidation. These polyols were formed with 10, 20, and 30 wt% with isocyanate (HDI N-3300) to form a polyurethane. The effect of concentration of conducting polyol on anticorrosive coating performance properties, namely mechanical and optical properties, was further studied. The anticorrosive performance was evaluated by salt spray test and electrochemical impedance spectroscopy.     

Reactive compatibilization of poly(styrene‐ran‐acrylonitrile)/poly(ethylene) blends through the acid–epoxy reaction

Two families of acid functional styrene/acrylonitrile copolymers (SAN) for application as dispersed phase barrier materials in poly(ethylene) (PE) were studied. One type is SAN made by nitroxide mediated polymerization (NMP), which was subsequently chain extended with a styrene/tert‐butyl acrylate (S/tBA) mixture to provide a block copolymer (number average molecular weight M_n = 36.6 kg mol^?1 and dispersity ? = 1.34, after which the tert‐butyl protecting groups were converted to acid groups (SAN‐b‐S/AA). The other acid functional SAN is made by conventional radical terpolymerization (SAN‐AA). SAN‐AA and SAN‐b‐S/AA were each melt blended with PE grafted with epoxy functional glycidyl methacrylate (PE‐GMA) at 160 °C in a twin screw extruder (70:30 wt % PE‐GMA:SAN co/terpolymer). The non‐reactive PE‐g‐GMA/SAN blend had a volume to surface area diameter = 3.0 μm while the reactive blends (via epoxy/acid coupling) (PE‐GMA/SAN‐b‐SAA and PE‐GMA/SAN‐AA) had = 1.7 μm and 1.1 μm, respectively. After thermal annealing, the non‐reactive blend coarsened dramatically while the reactive blends showed little signs of coarsening, suggesting that the acid/epoxy coupling was effective for morphological stability. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44178.     

Glycidyl Methacrylate-Based Copolymers as Healing Agents of Waterborne Polyurethanes

Self-healing materials and self-healing mechanisms are two topics that have attracted huge scientific interest in recent decades. Macromolecular chemistry can provide appropriately tailored functional polymers with desired healing properties. Herein, we report the incorporation of glycidyl methacrylate-based (GMA) copolymers in waterborne polyurethanes (WPUs) and the study of their potential healing ability. Two types of copolymers were synthesized, namely the hydrophobic P(BA-co-GMAy) copolymers of GMA with n-butyl acrylate (BA) and the amphiphilic copolymers P(PEGMA-co-GMAy) of GMA with a poly(ethylene glycol) methyl ether methacrylate (PEGMA) macromonomer. We demonstrate that the blending of these types of copolymers with two WPUs leads to homogenous composites. While the addition of P(BA-co-GMAy) in the WPUs leads to amorphous materials, the addition of P(PEGMA-co-GMAy) copolymers leads to hybrid composite systems varying from amorphous to semi-crystalline, depending on copolymer or blend composition. The healing efficiency of these copolymers was explored upon application of two external triggers (addition of water or heating). Promising healing results were exhibited by the final composites when water was used as a healing trigger.     

Toughening effect of comonomer on acrylic denture base resin prepared via suspension copolymerization

In this article, three copolymers used as denture base resins were prepared via suspension copolymerization using butyl acrylate (BA), butyl methacrylate (BMA), or methyl acrylate (MA) with methyl methacrylate (MMA), respectively. The homopolymers and copolymers were characterized by ¹³C nuclear magnetic resonance (¹³C NMR). The influence of the three comonomers on the mechanical property was investigated in details and the fracture surfaces of copolymer specimens were examined using scanning electron microscopy (SEM). Meanwhile, the T_g values of three copolymers were examined by differential scanning calorimetry (DSC). The results indicate that, poly(methyl methacrylate) (PMMA) copolymers with BA, BMA, or MA have been successfully prepared via suspension copolymerization. The presence of BA, BMA, or MA could improve the mechanical property especially the impact strength, the toughness of the materials was remarkably improved. The toughening effect of BMA monomer is most significant. When the content of BA is 2 wt %, the flexural strength improves by 51% and the impact strength improves by 81.3%. The T_g values of three copolymers all decrease. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012