Synthesis and characterization of novel block copolymer from trans‐4‐hydroxy‐L‐proline and poly(ethylene glycol)

A series of novel ABA‐type block copolymers were synthesized by polymerization of trans‐4‐hydroxy‐L ‐proline (HyP) in the presence of various molecular weight poly(ethylene glycol)s (PEGs), a bifunctional OH‐terminated PEG using stannous octoate as catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 5 wt % stannous octoate at 140°C under vacuum (20 mmHg) for 24 h. The synthesized copolymers were characterized by IR spectroohotometry, proton nuclear magnetic resonance, differential scanning calorimetry, and Ubbelohde viscometer. The glass transition temperature (T_g) of the copolymers shifted to significantly higher temperature with increasing the number average degree of polymerization and HyP/PEO molar ratio. In contrast, the melting temperature (T_m) decreased with increasing the HyP/PEO molar ratio. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1581–1587, 2001     

Synthesis and characterization of poly(L‐lactide)‐poly(ethylene glycol) multiblock copolymers

Poly(L‐lactide)‐poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. The reaction was carried out under mild conditions, using dicyclohexylcarbodiimide as the coupling agent and dimethylaminopyridine as the catalyst. The resulting copolymers were characterized by various analytical techniques, such as GPC, viscometry, ¹H‐NMR, FTIR, DSC, X‐ray diffractometry, and contact angle measurement. The results indicated that these copolymers presented outstanding properties pertinent to biomedical use, including better miscibility between the two components, low crystallinity, and hydrophilicity. Moreover, the properties of the copolymers can be modulated by adjusting the block length of the two components or the reaction conditions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1729–1736, 2002; DOI 10.1002/app.10580     

新型药物载体聚乙烯-聚丙交酯载药颗粒的制备及表征

Methoxy poly （ethylene glycol） -poly （D, L-lactide） block copolymers （PEG-PLA） were prepared through ring-opening polymerization. The oil in water suspension method was used to prepare block copolymer micelles. The critical micelle concentration （CMC） by fluorescence spectroscopy was 0. 0056 mg· ml^- 1. The physical state of the inner core region of micelles was characterized with ^1 HNMR. The size of indomethacin （IMC） loaded micelles measured by dynamic light scattering （DLS） showed narrow monodisperse size distribution and the average diameters were less than 50 nm. In addition, the nanoparticles with relatively high drug loading content （DLC） were obtained.     

Effect of poly(ethylene glycol) on the solid‐state polymerization of poly(ethylene terephthalate)

Poly(ethylene glycol) (PEG) and end‐capped poly(ethylene glycol) (poly(ethylene glycol) dimethyl ether (PEGDME)) of number average molecular weight 1000 g mol^?1 was melt blended with poly(ethylene terephthalate) (PET) oligomer. NMR, DSC and WAXS techniques characterized the structure and morphology of the blends. Both these samples show reduction in T_g and similar crystallization behavior. Solid‐state polymerization (SSP) was performed on these blend samples using Sb₂O₃ as catalyst under reduced pressure at temperatures below the melting point of the samples. Inherent viscosity data indicate that for the blend sample with PEG there is enhancement of SSP rate, while for the sample with PEGDME the SSP rate is suppressed. NMR data showed that PEG is incorporated into the PET chain, while PEGDME does not react with PET. Copyright © 2005 Society of Chemical Industry     

Synthesis and functionalities of poly(N-vinylalkylamide). VII. A novel aqueous two-phase systems based on poly(N-vinylacetamide) and dextran

It was found that a poly(N-vinylacetamide) (polyNVA)-dextran system formed two phases. The top was polyNVA-rich and the bottom phase was dextran-rich, which is the same as the poly(ethylene glycol) (PEG)-dextran system, and the phase separation occurred at a lower concentration than the PEG-dextran system. The protein separation in the polyNVA-dextran system was studied using myoglobin. Myoglobin was partitioned more in the bottom (dextran-rich) phase in a polyNVA-dextran system. The partition coefficient of the polyNVA-dextran system was smaller that of the PEG-dextran system, which suggests that the polyNVA-dextran system is superior to the PEG-dextran system for myoglobin separation. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 255–258, 1998     

聚乙二醇/聚己内酯三嵌段共聚物的合成与表征

以甲苯二异氰酸酯 (TDI)为偶联剂 ,合成了聚乙二醇 (PEG) /聚己内酯 (PCL)两亲性三嵌段共聚物 (PEG-b-PCL -b -PEG ,PECL) ,采用IR、1 H-NMR、DSC和WAXD分析和研究了PECL的结构与性能。实验结果表明 ,PECL的结构和组成与设计相一致 ,结晶度和熔点均低于均聚物 ,且随着PECL中PCL嵌段含量的增加 ,PCL嵌段熔点升高。透射电镜照片显示PECL纳米粒呈核 /壳结构的球形。     

Methoxy poly(ethylene glycol)‐block‐poly(D,L‐lactic acid) copolymer nanoparticles as carriers for transdermal drug delivery

This work evaluates the transdermal drug delivery properties of amphiphilic copolymer self‐assembled nanoparticles by skin penetration experiments in vitro. Paclitaxel‐loaded methoxy poly(ethylene glycol)‐block‐poly(D ,L ‐lactic acid) diblock copolymer nanoparticles (PNPs) were prepared by a solid dispersion technique and were applied to the surface of excised full‐thickness rat skin in Franz diffusion cells. HPLC, transmission electron microscopy, Fourier transform infrared spectroscopy and ¹H NMR were used to assay the receptor fluid. The results show that the amphiphilic copolymer nanoparticles with the entrapped paclitaxel are able to penetrate rat skin. Ethanol can improve the delivery of PNPs and increase the cumulative amount of paclitaxel in the receptor fluid by 3 times. Fluorescence microscopy measurements indicate that the PNPs can penetrate the skin not only via appendage routes including sweat ducts and hair follicles but also via epidermal routes. Copyright © 2007 Society of Chemical Industry     

Effect of self‐nucleation on the crystallization of segmented copolymer poly(ether ester)

The effect of self‐nucleation on the nonisothermal and isothermal crystallization behaviors of the segmented copolymer poly(ether ester), based on poly(ethylene glycol) as the soft segment and poly(ethylene terephthalate) as the hard segment was investigated by means of differential scanning calorimetry (DSC) and depolarization polarized light (DPL) techniques, respectively. The results demonstrated that self‐nucleation could enhance the crystallization rate in both cases. The experimental conditions of the self‐nucleation procedure studied by DSC were discussed in detail. The isothermal crystallization was analyzed by the Avrami equation, and the Avrami parameters were dependent on the melting temperature. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 498–504, 2001     

Characterization and comparison of diblock and triblock amphiphilic copolymers of poly(δ‐valerolactone)

Three types of pegylated amphiphilic copolymers of poly(δ‐valerolactone) (PVL) were copolymerized with methoxy poly(ethylene glycol) (MePEG) and poly(ethylene glycol) (PEG₄₀₀₀ and PEG_10,000), respectively. Pegylation of PVL allowed copolymers possessing amphiphilic property and efficiently self‐assembled to form micelles with a low critical micelle concentration (CMC) in the range of 10^?7–10^?8M. The average molecular weight of copolymers was in the range of 10,000–20,000 Da, and the polydispersity of copolymers was about 1.7–1.8. Higher mobility of low molecular weight PEG (i.e., MePEG and PEG₄₀₀₀) than high molecular weight PEG_10,000 allowed valerolactone ring opening more efficient in terms of PVL/MePEG and PVL/PEG₄₀₀₀ copolymers possessing longer chain length in hydrophobic domain. Pegylated PVL with low CMC and triblock structure was preferred to encapsulate drug during micelle formation. Although all of these amphiphilic copolymers exhibited controlled release character, the micelles formed by triblock copolymer possessed a more stable core‐shell conformation than that by diblock copolymer, and resulted in the release of drug from triblock micelles slower than that from diblock micelles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1836–1841, 2006     

Relationship between the crystallization behavior of poly(ethylene glycol) and stereocomplex crystallization of poly(L‐lactic acid)/poly(D‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a good biomedical polymer material with wide applications. The addition of poly(ethylene glycol) (PEG) as a plasticizer and the formation of stereocomplex crystals (SCs) have been proved to be effective methods for improving the crystallization of PLLA, which will promote its heat resistance. In this work, the crystallization behavior of PEG and PLLA/poly(d ‐lactic acid) (PDLA) in PLLA/PDLA/PEG and PEG‐b‐PLLA/PEG‐b‐PDLA blends has been investigated using differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. Both SCs and homocrystals (HCs) were observed in blends with asymmetric mass ratio of PLLA/PDLA, while exclusively SCs were observed in blends with approximately equal mass ratio of PLLA/PDLA. The crystallization of PEG was only observed for the symmetric blends of PLLA_39k/PDLA_35k/PEG_2k, PLLA_39k/PDLA_35k/PEG_5k, PLLA_69k/PDLA_96k/PEG_5k and PEG‐b‐PLLA_31k/PEG‐b‐PDLA_27k, where the mass ratio of PLLA/PDLA was approximately 1/1. The results demonstrated that the formation of exclusively SCs would facilitate the crystallization of PEG, while the existence of both HCs and SCs could restrict the crystallization of PEG. The crystallization of PEG is related to the crystallinity of PLLA and PDLA, which will be promoted by the formation of SCs. © 2017 Society of Chemical Industry     

5-氨基水杨酸-聚乙二醇高分子前药的制备及其释放行为

用羧基活化法,以聚乙二醇(PEG)、丁二酸酐为原料,制备了5-氨基水杨酸(5-ASA)的高分子前药.傅立叶红外分析表明5-ASA已经成功与PEG共价键连接,水溶性实验表明前药的水溶性比5-ASA的明显增大.对高分子前药在磷酸缓冲溶液中进行释放研究,结果表明:pH值为2.0和5.4时5-ASA的释放量较少;而pH值为7.2时,5-ASA的释放速度相对较快且释放量较大.     

Block copolymers of styrene containing oligomeric esters of terephthalic acids

A new generation of block copolymers were synthesized starting with depolymerized PET by glycolysis with some oligomeric diols. α,ω‐Dihydroxy poly(dimethyl siloxane)s, hexylene glycol, poly(ethylene oxide)glycols, and ethylene glycol were used as diols. The dihydroxy‐terminated depolymerization products containing a terephthalyl group and oligomeric diols were used to prepare a diradicalic macroinitiator (MI). These MIs were used to polymerize the styrene monomer. The new block copolymers obtained were characterized by physical and chemical methods and mechanical and thermal analyses. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 648–653, 2000     

Preparation of collagen‐immobilized poly(ethylene glycol)/poly(2‐hydroxyethyl methacrylate) interpenetrating network hydrogels for potential application of artificial cornea

To enhance the mechanical strength of poly(ethylene glycol)(PEG) gels and to provide functional groups for surface modification, we prepared interpenetrating (IPN) hydrogels by incorporating poly(2‐hydroxyethyl methacrylate)(PHEMA) inside PEG hydrogels. Formation of IPN hydrogels was confirmed by measuring the weight percent gain of the hydrogels after incorporation of PHEMA, as well as by ATR/FTIR analysis. Synthesis of IPN hydrogels with a high PHEMA content resulted in optically transparent and extensively crosslinked hydrogels with a lower water content and a 6 ～ 8‐fold improvement in mechanical properties than PEG hydrogels. Incorporation of less than 90 wt % PHEMA resulted in opaque hydrogels due to phase separation between water and PHEMA. To overcome the poor cell adhesion properties of the IPN hydrogels, collagen was covalently grafted to the surface of IPN hydrogels via carbamate linkages to hydroxyl groups in PHEMA. Resultant IPN hydrogels were proven to be noncytotoxic and cell adhesion study revealed that collagen immobilization resulted in a significant improvement of cell adhesion and spreading on the IPN hydrogel surfaces. The resultant IPN hydrogels were noncytotoxic, and a cell adhesion study revealed that collagen immobilization improved cell adhesion and spreading on the IPN hydrogel surfaces significantly. These results indicate that PEG/PHEMA IPN hydrogels are highly promising biomaterials that can be used in artificial corneas and a variety of other load‐bearing tissue engineering applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of star‐shaped poly(ethylene glycol)‐block‐poly(L‐lactic acid) copolymers by melt polycondensation

Compared with linear diblock or triblock poly(ethylene glycol)‐block‐poly(L ‐lactic acid) copolymer (PEG‐b‐PLLA), star‐shaped PEG‐b‐PLLA (sPEG‐b‐PLLA) copolymers exhibit smaller hydrodynamic radius and lower viscosity and are expected to display peculiar morphologies, thermal properties, and degradation profiles. Compared with the synthesis routine of PEG‐b‐PLLA form lactide and PEG, the traditional synthesis routine from LA and PEG were suffered by the low reaction efficiency, low purity, lower molecular weight, and wide molecular weight distribution. In this article, multiarm sPEG‐b‐PLLA copolymer was prepared from multiarm sPEG and L ‐lactic acid (LLA using an improved method of melt polycondensation, in which two types of sPEG, that is, sPEG₁ (four arm, Mn = 4300) and sPEG₂ (three arm, Mn = 3200) were chosen as the core. It was found the molecular weight of sPEG‐b‐PLLA could be strongly affected by the purity of LLA and sPEGs, and the purification technology of vacuum dewater and vacuum distillation could help to remove most of the impurities in commercial available LLA. The polymers, including sPEG and sPEG‐b‐PLLA with varied core (sPEG₁ and sPEG₂) and LLA/sPEG feeding ratios, were characterized and confirmed by ¹H‐NMR and ¹³C‐NMR spectroscopy, Fourier transform infrared spectroscopy (FT‐IR) and gel permeation chromatography, which showed that the terminal hydroxyl group in each arm of sPEGs had reacted with LLA to form sPEG‐b‐PLLA copolymers with fairly narrow molecular weight distribution. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of a novel solid–solid phase change luminescence material

Because of the large energy storage and small temperature variation during the phase change process, phase change materials (PCMs) are attracting increasing attention. In this study, a novel solid–solid PCM was prepared by coordinating rare earth Eu³⁺ ions to the carboxylate groups of a poly(ethylene glycol) (PEG) modified with two terephthalic acid groups. The structure and properties of the material were characterized using ¹H NMR, differential scanning calorimetry, infrared spectroscopy, gel permeation chromatograph and fluorescence spectroscopy. The coordination of Eu³⁺ with the double‐carboxylated PEG material significantly improved both the enthalpy value of the phase change material and its light‐emitting properties. This paper describes the facile synthesis and characterization of a novel phase exchange luminescent Eu–PEG material. The light‐emitting characterizations show that this modified PEG material has both good phase change properties and excellent luminescent properties. Copyright © 2010 Society of Chemical Industry     

亲水性PET共混材料的制备及性能研究

以机械共混法制备亲水性聚对苯二甲酸乙二醇酯(PET)共混材料,并通过接触角测定仪、差示扫描量热仪(DSC)和电子万能材料试验机等对共混材料的亲水性能、热性能和力学性能等进行研究与分析。结果表明,亲水处理剂聚乙二醇(PEG)、聚丙烯酸钠(PAAS)、聚乙烯吡咯烷酮(PVP)均能改善PET的亲水性能,影响PET的结晶性能,但亲水处理剂对PET的力学性能影响较小,其中PET/PEG共混材料的亲水性最优;随着PEG含量的增加,PET/PEG共混材料的亲水性先逐渐增强,当PEG含量高于5%后,共混材料的亲水性变化很小;且PET的结晶度随着PEG的加入呈现先增大后减小的趋势。     

Formation of honeycomb films from poly(L‐lactide)‐block‐poly(ethylene glycol) via water‐droplet templating

The fabrication of honeycomb‐patterned films from amphiphilic poly(L ‐lactide)‐block‐poly(ethylene glycol) (PLEG) in a high‐humidity atmosphere is reported. The influence of the solution concentration on pattern formation was investigated. Moreover, by comparing the different conditions of fabricating regular structures between PLEG and poly(phenylene oxide), the mechanism of the regular pattern formation was studied. Finally, by adding sodium dodecylsulfate to a concentrated solution of 1 g L^?1 PLEG? CHCl₃ which otherwise could not form regular pores, we found that regular pores could be obtained. The PLEG honeycomb films are expected to be of use in cell culture, tissue engineering and many other areas. Copyright © 2007 Society of Chemical Industry     

Porous biodegradable polyester blends of poly(L‐lactic acid) and poly(ε‐caprolactone): physical properties,morphology, and biodegradation

Poly(L ‐lactic acid) (PLLA), poly(ε‐caprolactone) (PCL), and their films without or blended with 50 wt% poly(ethylene glycol) (PEG) were prepared by solution casting. Porous films were obtained by water‐extraction of PEG from solution‐cast phase‐separated PLLA‐blend‐PCL‐blend‐PEG films. The effects of PLLA/PCL ratio on the morphology of the porous films and the effects of PLLA/PCL ratio and pores on the physical properties and biodegradability of the films were investigated. The pore size of the blend films decreased with increasing PLLA/PCL ratio. Polymer blending and pore formation gave biodegradable PLLA‐blend‐PCL materials with a wide variety of tensile properties with Young's modulus in the range of 0.07–1.4 GPa and elongation at break in the range 3–380%. Pore formation markedly increased the PLLA crystallinity of porous films, except for low PLLA/PCL ratio. Polymer blending as well as pore formation enhanced the enzymatic degradation of biodegradable polyester blends. Copyright © 2006 Society of Chemical Industry     

Biodegradable polylactide/poly(ethylene glycol)/polylactide triblock copolymer micelles as anticancer drug carriers

Adriamycin (ADR) was selected as a model drug to evaluate the potential applications of polylactide/poly(ethylene glycol)/polylactide (PLA/PEG/PLA) micelles as drug carriers in parenteral delivery systems. The PLA/PEG/PLA triblock copolymer micelles were characterized by dynamic light scattering and transmission electron microscopy. It was found that the micelle size increased with the increasing of the PLA chain length. The average size of ADR‐loaded micelles was 143.2 nm. The histogram analysis showed that the ADR‐loaded micelles possessed a narrow unimodal size distribution. The ADR loading contents of the micelles and ADR entrapment efficiency were dependent on the PLA chain length and PEG chain length in the copolymer. They increased with the increase of the PLA chain length, but the PEG chain length was identical and decreased with the increase of the PEG chain length; the length of the PLA block was similar. The initial amount of ADR also influenced the drug contents and entrapment efficiency (i.e., the more the initial amount added, the more the drug contents and the higher encapsulation efficiency). The drug release experiments indicated that the ADR‐loaded micelles possessed sustained release characteristics. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1976–1982, 2001     

聚乙二醇二酸(2-羟甲基-3,5,6-三甲基吡嗪)酯的合成

以二环己基碳二亚胺(DCCI)为缩合剂,用聚乙二醇-2000-二酸来修饰2 羟甲基 3,5,6 三甲基吡嗪,产率69%。通过熔点、IR和1HNMR对产物进行了表征,熔点为45～48℃;红外特征吸收为1747cm-1(CO),1254cm-1(C—O—C);1HNMR为1 9(—CH3,3H,s),2 2(—CH3,6H,s),4 2(—CH2—,2H,s),3 6(—OCH2—,multi-H,s)。