Effects of polyethylene‐grafted maleic anhydride (PE‐g‐MA) on thermal properties,morphology, and tensile properties of low‐density polyethylene (LDPE) and corn starch blends

The effects of polyethylene‐grafted maleic anhydride (PE‐g‐MA) on the thermal properties, morphology, and tensile properties of blends of low‐density polyethylene (LDPE) and corn starch were studied with a differential scanning calorimeter (DSC), scanning electron microscope (SEM), and Instron Universal Testing Machine, respectively. Corn starch–LDPE blends with different starch content and with or without the addition of PE‐g‐MA were prepared with a lab‐scale twin‐screw extruder. The crystallization temperature of LDPE–corn starch–PE‐g‐MA blends was similar to that of pure LDPE but higher than that of LDPE–corn starch blends. The interfacial properties between corn starch and LDPE were improved after PE‐g‐MA addition, as evidenced by the structure morphology revealed by SEM. The tensile strength and elongation at break of corn starch–LDPE–PE‐g‐MA blends were greater than those of LDPE–corn starch blends, and their differences became more pronounced at higher starch contents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2904–2911, 2003     

Effects of glycerol and PE‐g‐MA on morphology,thermal and tensile properties of LDPE and rice starch blends

The effects of glycerol and polyethylene‐grafted maleic anhydride (PE‐g‐MA) on the morphology, thermal properties, and tensile properties of low‐density polyethylene (LDPE) and rice starch blends were studied by scanning electron microscopy (SEM), differential scanning calorimetry, and the Instron Universal Testing Machine, respectively. Blends of LDPE/rice starch, LDPE/rice starch/glycerol, and LDPE/rice starch/glycerol/PE‐g‐MA with different starch contents were prepared by using a laboratory scale twin‐screw extruder. The distribution of rice starch in LDPE matrix became homogenous after the addition of glycerol. The interfacial adhesion between rice starch and LDPE was improved by the addition of PE‐g‐MA as demonstrated by SEM. The crystallization temperatures of LDPE/rice starch/glycerol blends and LDPE/rice starch/glycerol/PE‐g‐MA blends were similar to that of pure LDPE but higher than that of LDPE/rice starch blends. Both the tensile strength and the elongation at break followed the order of rice starch/LDPE/glycerol/PE‐g‐MA blends > rice starch/LDPE/glycerol > LDPE/rice starch blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 344–350, 2004     

Evaluation of the thermal and mechanical properties of poly(ε‐caprolactone), low‐density polyethylene,and their blends

The thermal and mechanical properties of low‐density polyethylene (LDPE), poly(ε‐caprolactone) (PCL), and their blends were evaluated. Differential scanning calorimetry showed that increasing the PCL content of the blend did not change the LDPE melting temperature, but reduced the crystallinity by up to 16.8%. This behavior was related to interactions between the PCL chains and the crystalline phase of LDPE. Tensile strength and elongation at break values for the blends were lower than those for the pure polymers, which suggested an incompatibility between the polymers. The values for Young's modulus under tensile increased when PCL was added to LDPE. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91:3909–3914, 2004     

Morphology,thermomechanical properties,and biodegradability of low density polyethylene/starch blends

The biodegradability of low density polyethylene (LDPE)/starch and LDPE/starch/starch acetate (STAc) blends was tested and observed to be dependent on STAc content. The binary and ternary blends containing up to a maximum concentration of 30% starch were examined for their thermal, mechanical, and morphological properties. The blends with no STAc or 2.5% STAc show almost no adherence of two phases. With 10% STAc, dispersion of starch was observed to increase with some adherence to LDPE. Tensile strength, elongation at break, and Izod impact strength of the blends decreased with increased starch content. However, incorporation of STAc along with starch improved all these properties, particularly elongation at break and toughness. The melt flow index was also improved on partial substitution of starch by STAc. Maximum biodegradability was observed for the blends containing 30% (starch + STAc). Cell growth was observed to increase with increasing concentration of (starch + STAc) in the blends. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2791–2802, 1999     

Modification of low‐density polyethylene by graft copolymerization with maleic anhydride and blends with polyamide 6

Modification of low‐density polyethylene (LDPE) hyperbranched grafting with a maleic anhydride (MAH) was carried out using corotating twin screw extruder in the presence of benzoyl peroxide. The LDPE/polyamide 6 (PA6) and LDPE‐g‐MAH/PA6 blends were obtained with a corotating twin screw extruder. The melt viscosity of the grafted LDPE was measured by a capillary rheometer. The grafted copolymer was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy The effects of variations in temperature, PA6 loading, and benzoyl peroxide and MAH concentration were investigated. The results show that most MAH monomers were grafted onto the LDPE at a lower MAH concentration. With the proper selection of the reaction parameters, we obtained a grafting degree higher than 4.9%. Mechanical test results indicate that the blends had good interfacial adhesion and good stability of the phase structure during heating, which was reflected in the mechanical properties. Furthermore, the results reveal that the tensile strength of the blends increased continuously with increasing PA6 content. Moreover, the home‐synthesized maleated LDPE could be used for the compatibilization of LDPE/PA 6 blends. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel dynamic vulcanization of polyethylene and ozonolysed natural rubber blends: Effect of curing system and blending ratio

Dynamic vulcanization was studied in terms of the change in α‐relaxation temperatures of the LDPE matrix, morphology, and mechanical properties of LDPE/ozonolysed NR blends which were vulcanized at various blend ratios and with different curing systems, i.e., peroxide and sulfur systems. The ozonolysed NR with M _w = 8.30 × 10⁵ g mol⁻¹ and M _n = 2.62 × 10⁵ g mol⁻¹, prepared by the in situ ozonolysis reaction of natural rubber latex, was used in this study. The significant change in the α‐relaxation temperature of LDPE in the LDPE/ozonolysed NR, dynamically vulcanized using the sulfur system, suggested that sulfur vulcanization of the blend gave a higher degree of crosslink density than using peroxide and corresponded with the improved damping property and homogenous phase morphology. However, the peroxide cured blends of LDPE/ozonolyzed NR gave more improvement of tensile strength and elongation at break than the sulfur cured system. Furthermore, the mechanical properties of tensile strength, elongation at break, and damping were improved by increasing the ozonolyzed natural rubber content in both DCP and sulfur cured blends. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Use of poly(ethylene‐co‐vinyl alcohol) as compatibilizer in LDPE/thermoplastic tapioca starch blends

Poly(ethylene‐co‐vinyl alcohol) (EVOH) was used as a compatibilizer to make blends of low‐density polyethylene (LDPE) and plasticized starch (TS). The tensile properties and impact strength were measured and compared with those of neat LDPE. The morphology of the blend specimens, both fractured and unfractured, was observed by scanning electron microscopy. Comparison of the properties showed that the impact strength of the blend improves significantly by the addition of a compatibilizer even with a high TS loading of 40 and 50% (by weight). A high elongation at break almost matching that of neat polyethylene was also obtained. The blend morphology of the etched specimens revealed fine dispersion of the starch in the polyethylene matrix, while the fracture surface morphology clearly indicate that the failure of compatibilized blends occurs mainly by the ductile mode. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3126–3134, 2002     

Rheological and mechanical properties of blends of LDPE with high contents of UHMWPE wastes

The mixing of UHMWPE wastes with other polymers aims to reduce the environmental impact of waste materials. The dynamic rheological behavior of the blends, tensile and abrasion properties, Shore D hardness and impact resistance, and morphology are important in characterizing polymer blends. In this work, we have sought to obtain blends containing different proportions of UHMWPE wastes and LDPE with properties suitable for the manufacture of useful products. The blends exhibit an increase in complex viscosities, storage modulus, and Young's modulus with increasing content of UHMWPE wastes and a decrease in both the maximal elongation and Charpy impact resistance. Summarizing, the addition of up to 60 wt % of industrial fragments of UHMWPE is possible using conventional methods of processing to prepare blends with values of tensile strength, abrasion, and Shore D hardness similar to those of LDPE. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44996.     

Novel biodegradable low-density polyethylene–poly(lactic acid)–starch ternary blends

The ternary powder blends based on low-density polyethylene (LDPE) and two polymers of natural origin poly(lactic acid) (PLA) and starch are obtained in a rotor disperser under conditions of shear deformations. The dependence of the final powder dispersity on the composition is explored. A comparative analysis of the mechanical properties of the ternary blends with those of the LDPE–PLA and PLA–starch binary blends previously obtained has revealed that the presence of two rigid polymers PLA and starch leads to an increase in the elastic modulus and a decrease in the tensile strength and elongation at break. In the study of the blend biodegradability, it is found that the presence of two polymers of natural origin in the system with a total mass fraction of 60% promotes intensive biodegradation.     

Effect of compatibilizer on the crystallization,rheological, and tensile properties of LDPE/EVOH blends

The effect of the compatibilizer on the crystallization, rheological, and tensile properties of low-density polyethylene (LDPE)/ethylene vinyl alcohol (EVOH) (70/30) blends was investigated. Maleic anhydride-grafted linear low-density polyethylene (LLD-g-MAH) was used as the compatibilizer in various concentrations (from 1 to 12 phr). The interesting effect of compatibilization on the crystallization kinetics of the blends was noted, and the correlation between the morphology and the rheological and tensile properties was also discussed. Morphological analysis showed that the blends exhibited a regular and finer dispersion of the EVOH phase when LLD-g-MAH was added. Nonisothermal crystallization exotherms of the compatibilized LDPE/EVOH blends showed the retarded crystallization of the dispersed EVOH phase, which probably resulted from the constraint effect of the grafted EVOH (EVOH-g-LLD) as well as the size reduction of the EVOH domains. The blends exhibited increased melt viscosity and storage modulus and also enhanced tensile properties with the addition of LLD-g-MAH, which seemed to be attributable to both dispersed particle-size reduction and improved interfacial adhesion. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1245–1256, 1998     

Mechanical strengths of molten and solidified LLDPE/LDPE blends and wood/LDPE composites under tensile deformation

The mechanical strengths of neat low‐density polyethylene (LDPE), a blend of LDPE with linear low‐density polyethylene (LLDPE), and a composite of LDPE with wood flour (wood/LDPE) were investigated in molten and solidified states under tensile deformation. The results are discussed in terms of the effects of LLDPE and wood contents, roller speed, and volumetric flow rate. In LLDPE/LDPE blends, incorporating LLDPE from 0 to 30 wt% into LDPE caused a slight increase in drawdown force, a larger fluctuation in drawdown force, and a reduction of maximum roller speed to failure. The mechanical properties of the solidified LLDPE/LDPE corresponded to those of the molten LLDPE/LDPE with regard to the effect of LLDPE content. For wood/LDPE composites, increasing the wood flour content in molten LDPE caused considerable reductions in drawdown time and maximum roller speed to failure. The drawdown force increased with increasing wood flour up to 10 wt% before it decreased at the wood loading of 20 wt%. A number of voids and pores on the extrudate surfaces became obvious for the composites with 20 wt% of wood content. Increasing wood content enhanced the tensile modulus for the solidified LDPE but decreased its tensile strength. Unlike those of LLDPE/LDPE blends, the changes in tensile modulus and strength of solidified wood/LDPE composites with wood content did not correspond to those of the molten composites. In all cases, the drawdown force increased with increasing roller speed. The effect of volumetric flow rate from the extruder on the mechanical strengths of the solidified blends was more pronounced than on those of the molten ones. J. VINYL ADDIT. TECHNOL., 2011. © 2011 Society of Plastics Engineers     

PET/PTT共混体系的相容特性及力学性能研究

通过熔融共混法制备了聚对苯二甲酸乙二醇酯(PET)与聚对苯二甲酸醇酯(PTT)的共混物,采用差示扫描量热仪、动态热机械分析仪、万能电子试验机等对共混体系的热性能、动态力学性能及拉伸性能进行了测试。测得PET/PTT共混体系只有1个玻璃化转变温度(Tg)和损耗峰,表明在非晶区完全相容,其中纯PET的Tg为84℃,纯PTT的Tg低于50℃; 而双重熔融峰及热结晶峰宽化现象的出现表明,共混体系在晶区是部分相容,各组分倾向于分别进行有序化排列、单独结晶,其中纯PET的熔点为256℃,纯PTT的熔点为229 ℃;共混体系的拉伸模量和拉伸强度随PTT含量的增加呈上升趋势;但当共混比例接近时体系的拉伸模量和拉伸强度有所下降,共混比为5/5时的拉伸模量和拉伸强度分别低达1098MPa和51MPa。     

Morphology and tensile properties of high-density polyethylene/natural rubber/thermoplastic tapioca starch blends: The effect of citric acid-modified tapioca starch

The effect of citric acid on the tensile properties of high density polyethylene (HDPE)/natural rubber (NR)/thermoplastic tapioca starch (TPS) blends was investigated. The ratio between HDPE/NR was fixed at 70/30 and used as the matrix system. TPS loadings, after modification with citric acid (TPSCA) and without modification (TPS), were varied from 0 to 30 wt %. The morphologies and tensile properties of HDPE/NR blends were evaluated as a function of TPS loadings. The tensile strength, Young's modulus, and elongation at break were found to decrease with increasing TPS loading. However, a slight improvement in the tensile strength of HDPE/NR/TPSCA blends at 5 and 10 wt % TPS loadings were observed. TPS can be partly depolymerised to produce a low viscosity product when processed with citric acid. TPS with low viscosity can easily disperse in the thermoplastic natural rubber (TPNR) system and reduce the surface tension at the interphase of TPS-HDPE/NR as shown by scanning electron microscopy (SEM). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Rheological and mechanical characteristics of low density polyethylene/ethylene‐vinyl acetate/organoclay nanocomposites

Attempts were made to trace the effect of organoclay (OC) on the rheological and mechanical behaviors of the low density polyethylene (LDPE)/ethylene‐vinyl acetate (EVA) blends. To do this effectively, in addition to LDPE/EVA/OC system, pure LDPE and LDPE/EVA blends were also examined as model systems. The rheological behavior was determined by the capillary rheometer. Morphological characterization was also carried out using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and theoretical approach based on interfacial energies. Shear viscosity, tensile strength and elastic modulus of LDPE/EVA were found to decrease by increasing the EVA content, while for LDPE/EVA/OC ternary nanocomposites, such properties showed an increase by increasing the content of EVA. Such behavior was explained by the morphological characteristic of the system in which OC was mainly intercalated/exfoliated in the EVA phase. This morphological characteristic was corroborated by the XRD, TEM and interfacial energies data. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers     

Reactive extrusion for the synthesis of nylon 12 and maleated low‐density polyethylene blends via the anionic ring‐opening polymerization of lauryllactam

Nylon 12 was successfully synthesized in a twin‐screw extruder via the anionic ring‐opening polymerization of lauryllactam (LL). Maleated low‐density polyethylene (LDPE–MAH) was added to improve the mechanical properties of nylon 12. The in situ blends of nylon 12 and LDPE–MAH were characterized by mechanical testing and scanning electron microscopy. With increasing LDPE–MAH content, the tensile strength and flexural strength decreased, whereas the blend had improved impact strength and achieved supertoughness when the content of LDPE–MAH was 30 wt %. In the in situ formed low‐density polyethylene‐g‐PA12 copolymer, the domain of the LDPE–MAH phase was finely dispersed in the nylon 12 matrix. The good interface between the two phases demonstrated that LDPE–MAH could be used as a macromolecular activator to induce the polymerization of LL. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

PBS/PBAT共混型全生物降解材料的制备及其性能研究

通过熔融共混法制备了聚丁二酸丁二醇酯（PBS）/聚己二酸对苯二甲酸丁二酯（PBAT）共混物,用熔体流动速率法、扫描量热法、X射线衍射、扫描电镜法及力学性能测试等手段研究了PBS/PBAT共混物的熔体流动性、结晶性能、力学性能以及共混物相容性。结果表明,随着PBAT含量的增加,PBS/PBAT共混体系的拉伸强度先升高后降低,断裂伸长率不断提高,冲击强度先降低后提高;当PBAT含量为20 %（质量分数,下同）时,与纯PBS相比,断裂伸长率提高10倍,冲击强度提高82 %,而拉伸强度仅仅降低6 %。     

Processabilities & mechanical properties of the biodegradable LDPE/modified starch blends

An investigation of the biodegradable polymers based on starch has been accomplished. Starch needs to be modified before blending with low density polyethylene (LDPE) because of its hydrophilicity. Three kinds of modification methods were applied to obtain the compatibility to starchLDPE blends. The first one was the esterification of the hydroxyl group of starch with acetic anhydride. The second was the copolymerization of acrylonitrile and styrene onto starch. The last was the esterification reaction of the hydroxyl group of starch with three kinds of ionomers. The tensile strength, % elongation, Young’s modulus, and shear viscosities of blends of the modified starch and LDPE were examined. Ionomer-treated starch showed better compatibility with LDPE to give better performances than other blends.     

Photobiodegradation of low‐density polyethylene/banana starch films

The effects of the starch content, photosensitizer content, and compatibilizer on the photobiodegradability of low‐density polyethylene (LDPE) and banana starch polymer blend films were investigated. The compatibilizer and photosensitizer used in the films were PE‐graft‐maleic anhydride (PE‐g‐MA) and benzophenone, respectively. Dried banana starch at 0–20% (w/w) of LDPE, benzophenone at 0–1% (w/w) of LDPE, and PE‐g‐MA at 10% (w/w) of banana starch were added to LDPE. The photodegradation of the blend films was performed with outdoor exposure. The progress of the photodegradation was followed by determining the carbonyl index derived from Fourier transform IR measurements and the changes in tensile properties. Biodegradation of the blend films was investigated by a soil burial test. The biodegradation process was followed by measuring the changes in the physical appearance, weight loss, and tensile properties of the films. The results showed that both photo‐ and biodegradation rates increased with increasing amounts of banana starch, whereas the tensile properties of the films decreased. The blends with higher amounts of benzophenone showed higher rates of photodegradation, although their biodegradation rates were reduced with an increase in benzophenone content. The addition of PE‐g‐MA into polymer blends led to an increase in the tensile properties whereas the photobiodegradation was slightly decreased compared to the films without PE‐g‐MA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2725–2736, 2006     

Mechanical properties of poly(lactic acid) and wheat starch blends with methylenediphenyl diisocyanate

Poly(lactic acid) (PLA) and wheat starch are biodegradable polymers derived from renewable sources. A previous study showed that thermally blending starch and PLA in the presence of methylenediphenyl diisocyanate (MDI) enhanced the mechanical properties of the blends. In this work, blends of PLA with various levels of wheat starch and MDI were hot mixed at 180°C then hot‐pressure molded at 175°C to form test specimens. The blends were characterized for mechanical properties, fracture microstructure, and water absorption. Pure PLA had a tensile strength of 62.7 MPa and elongation of 6.5%. The blend with 45% wheat starch and 0.5 wt % MDI gave the highest tensile strength of about 68 MPa with about 5.1% elongation. The blend with 20% starch and 0.5 wt % MDI had the lowest tensile strength of about 58 MPa with about 5.6% elongation. Dynamic mechanical analysis showed that storage modulus increased and tan δ decreased as starch level increased, but almost leveled off when starch level reached 45% or higher. Water absorption of the blends increased significantly with starch content. Yet the blend, if water proofed on its surface, has potential for short‐term disposable applications. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1257–1262, 2002; DOI 10.1002/app.10457     

LDPE/starch blends compatibilized with PE-g-MA copolymers

In the present study, low-density polyethylene (LDPE) and plasticized starch (PLST) blends, containing different percentages of PLST, were prepared. In these blends, two different polyethylene/maleic anhydride graft (PE-g-MA) copolymers containing 0.4 and 0.8 mol % anhydride groups, respectively, were added as compatibilizers at 10 wt % PLST. The compatibilization reaction was followed by FTIR spectroscopy. The morphology of the blends was studied using scanning electron microscopy (SEM). It was found that as the amount of anhydride groups in the copolymers increases a finer dispersion of PLST in the LDPE matrix is achieved. This is reflected in the mechanical properties of the blends and especially in the tensile strength. The blends compatibilized with the PE-g-MA copolymer containing 0.8 mol % anhydride groups have a higher tensile strength, which in all blends, even in those containing 20 and 30 wt % PLST, is similar to that of pure LDPE. The biodegradation of the blends followed the exposure to activated sludge. It was found that the compatibilized blends have only a slightly lower biodegradation rate compared to the uncompatibilized blends. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 1503–1521, 1998