Adsorption and desorption properties of the chelating membranes prepared from the PE films

The chelating membranes for adsorption of metal ions were prepared by the photografting of glycidyl methacrylate (GMA) onto a polyethylene (PE) film and the subsequent modification of the resultant GMA‐grafted PE (PE‐g‐PGMA) films with disodium iminodiacetate in an aqueous solution of 55% DMSO at 80°C. The adsorption and desorption properties of the iminodiacetate (IDA) group‐appended PE‐g‐PGMA (IDA‐(PE‐g‐PGMA)) films to Cu²⁺ ions were investigated as functions of the grafted amount, pH value, Cu²⁺ ion concentration, and temperature. The amount of adsorbed Cu²⁺ ions increased with an increase in the pH value in the range of 1.0–5.0. The time required to reach the equilibrium adsorption decreased with an increase in the temperature, although the degree of adsorption stayed almost constant. The amount of Cu²⁺ ions desorbed from the (IDA‐(PE‐g‐PGMA)) films increased and the time required to reach the equilibrium desorption decreased with an increase in the HCl concentration. About 100% of Cu²⁺ ions were desorbed in the aqueous HCl solutions of more than 0.5M. The amounts of adsorbed and desorbed Cu²⁺ ions were almost the same in each cyclic process of adsorption in a CuCl₂ buffer at pH 5.0 and desorption in an aqueous 1.0M HCl solution. These results indicate that the IDA‐(PE‐g‐PGMA) films can be applied to a repeatedly generative chelating membrane for adsorption and desorption of metal ions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99:1895–1902, 2006     

Synthesis of star–comb‐shaped polymer with porphyrin‐core and its self‐assembly behavior study

5,10,15,20‐tetra(4‐hydroxyphenyl)porphyrin (THPP) was synthesized by the condensation of pyrrole with 4‐hydroxybenzaldehyde in the presence of solvent (propionic acid). Subsequently, the resulting THPP was converted to a tetrafunctional star‐shaped macroinitiator (porphyrin‐Br₄) by esterification of it with 2‐bromopropanoyl bromide, and then atom transfer radical polymerization (ATRP) of styrene was conducted at 110°C with CuCl/2,2′‐bipyridine as the catalyst system. The resulting product was reacted with NBS to obtain star‐shaped initiator porphyrin‐(PSt‐Br)₄, which was used the following ATRP of the GMA to synthesize star–comb‐shaped grafted polymer porphyrin‐(PSt‐g‐PGMA)₄. The number molecular weight was 2.3 × 10⁴ g/mol, and the dispersity was narrow (M_w/M_n = 1.32). The structure of the polymers was investigated by NMR, UV–vis, IR, and GPC measurement. The self‐assembly behavior of the polymer porphyrin‐(PSt‐g‐PGMA)₄ was studied by DLS and AFM. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermal properties of poly(maleic anhydride‐alt‐acrylic acid) in the presence of certain metal chlorides

Polychelates were synthesized by the addition of aqueous solutions of copper(II), cadmium(II), and nickel(II) chlorides to aqueous solutions of poly(maleic anhydride‐alt‐acrylic acid) [poly(MA‐alt‐AA)] in different pH media. The thermal properties of poly(MA‐alt‐AA) and its metal complexes were investigated with thermogravimetry and differential scanning calorimetry (DSC) measurements. The polychelates showed higher thermal stability than poly(MA‐alt‐AA). The thermogravimetry of the polymer–metal complexes revealed variations of the thermal stability by complexation with metal ions. The relative thermal stabilities of the systems under investigation were as follows: poly(MA‐alt‐AA)–Cd(II) > poly(MA‐alt‐AA)–Cu(II) > poly(MA‐alt‐AA)–Ni(II) > poly(MA‐alt‐AA). The effects of pH on the complexation and gravimetric analysis of the polychelates were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3926–3930, 2006     

Synthesis,characterization, and application of amberlite XAD‐2‐ salicylic acid‐ iminodiacetic acid for lead removal from human plasma and environmental samples

A new chelating resin is prepared by coup‐ling Amberlite XAD‐2 with salicylic acid (SAL) through an azo spacer. Then the polymer support was coupled with iminodiacetic acid (IDA). The resulting sorbent has been characterized by FT‐IR, elemental analysis, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) and studied for the preconcentration and determination of trace Pb (II) ion from human biological fluid and environmental water samples. The optimum pH value for sorption of the metal ion was 5. The sorption capacity of functionalized resin is 67 mg g⁻¹. The chelating sorbent can be reused for 20 cycles of sorption–desorption without any significant change in sorption capacity. A recovery of 95% was obtained for the metal ion with 0.5M nitric acid as eluting agent. The profile of lead uptake on this sorbent reflects good accessibility of the chelating sites in the Amberlite XAD‐2‐SAL/IDA. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. The equilibrium adsorption data of Pb (II) on modified resin were analyzed by Langmuir, Freundlich, Temkin, and Redlich‐Peterson models. Based on equili‐brium adsorption data the Langmuir, Freundlich, and Temkin constants were determined 0.428, 20.99, and 7 × 10⁻¹² at pH 5 and 20°C. The method was successfully applied for determination of lead ions in human plasma and sea water sample. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Iminodiacetic acid‐containing polymer brushes grafted onto silica gel for preconcentration and determination of copper(II) in environmental samples

Silica gel has been modified by silylation with 3‐mercaptopropyltrimethoxysilane followed by graft polymerization of dimethylacrylamide and (N,N‐bis‐carboxymethyl)amino‐3‐allylglycerol‐co‐dimethylacrylamide, synthesized via the reaction of allyl glycidyl ether with iminodiacetic acid. The sorbent, poly(AGE/IDA‐co‐DMAA)‐grafted silica gel, has been characterized by FTIR, elemental analysis, thermogravimetric analysis (TGA), FT‐Raman, and scanning electron microscopy and studied for the preconcentration and determination of trace amounts of Cu(II) ion in environmental water samples. The optimum pH value for quantitative sorption of Cu(II) in batch mode was 5.5 and desorption was achieved, using 0.5 mol L^?1 nitric acid. The sorption capacity of functionalized sorbent is 32.3 mg g^?1. The chelating sorbent was reused for 15 sorption–desorption cycles without any significant change in sorption capacity. The profile of copper uptake by the sorbent reflected good accessibility of the chelating sites in the poly(AGE/IDA‐co‐DMAA)‐grafted silica gel. Scatchard analysis demonstrated homogeneous nature of binding sites. The equilibrium adsorption data of Cu(II) on modified sorbent were analyzed by Langmuir, Freundlich, Temkin, and Redlich–Peterson models. Based on equilibrium adsorption data, the Langmuir, Freundlich, and Temkin constants were determined as 0.0665, 4.26, and 8.34, respectively, at pH 5.5 and 20°C. Adsorption isotherms were analyzed at different temperatures to obtain free energy, enthalpy, and entropy of adsorption. The method was applied for Cu(II) determination in sea water samples. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Super‐Tough and Highly‐Ductile Poly(l‐lactic acid)/Thermoplastic Polyurethane/Epoxide‐Containing Ethylene Copolymer Blends Prepared by Reactive Blending

Ethylene‐methyl acrylate‐glycidyl methacrylate copolymer (E‐MA‐GMA) is employed to improve the impact toughness of poly(l ‐lactic acid) (PLLA)/thermoplastic polyurethane (TPU) blends by reactive melt‐blending. The reaction and miscibility between the components are confirmed by Fourier transform infrared spectroscopy, dynamic mechanical analysis, and differential scanning calorimetry. A super‐tough PLLA/TPU/E‐MA‐GMA multiphase blend (75/10/15) exhibits a significantly improved impact strength of 77.77 kJ m^?2, which is more than 17 times higher than that of PLLA/TPU (90/10) blend. A co‐continuous‐like TPU phase structure involving E‐MA‐GMA phase at the etched cryo‐fractured surface and the high‐orientated matrix deformation at the impact‐fractured surface are observed by scanning electron microscopy. The high‐orientated matrix deformation induced by the co‐continuous TPU phase structure is responsible for the super toughness of PLLA/TPU/E‐MA‐GMA blends.     

Polymer complexes. XXXI. Potentiometric and thermodynamic studies of 2‐acrylamido‐2‐amino‐3‐hydroxy pyridine and its metal complexes

Proton ligand dissociation and metal ligand stability constants of 2‐acrylamido‐2‐amino‐3‐hydroxy pyridine (AAHP) with some transition metal ions in 0.1 M KCl and 50% (v/v) ethanol–water mixture were calculated potentiometrically. In the presence of 2,2′‐azobisisobutyronitrile as initiator the proton‐polymeric ligand dissociation and metal polymeric ligand stability constants were also evaluated. The influence of temperature on the dissociation of AAHP and the stability of its metal complexes in the monomeric and polymeric forms were critically studied. On the basis of the thermodynamic functions, the dissociation process of AAHP was found nonspontaneous, endothermic, and entropically unfavorable, although the formed metal complexes showed spontaneous, endothermic, and entropically favorable behavior. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2552–2557, 2000     

Influence of the comonomers (styrene and methyl acrylate) on the rate of photocrosslinking of 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}‐ phenyl acrylate

[2,6‐Bis(4‐hydroxybenzylidene)cyclohexanone] (HBC) was prepared by reacting cyclohexanone and p‐hydroxybenzaldehyde in the presence of acid catalyst. Acrylated derivative of HBC, 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}phenyl acrylate (HBA), was prepared by reacting HBC with acryloyl chloride in the presence of triethylamine. Copolymers of HBA with styrene (S) and methyl acrylate (MA) of different feed compositions were carried out by solution polymerization technique by using benzoyl peroxide (BPO) under nitrogen atmosphere. All monomers and polymers were characterized by using IR and NMR techniques. Reactivity ratios of the monomers present in the polymer chain were evolved by using Finnman–Ross (FR), Kelen–Tudos (KT), and extended Kelen–Tudos (ex‐KT) methods. Average values of reactivity were achieved by the following three methods: r₁ (S) = 2.36 ± 0.45 and r₂ (HBA) = 0.8 ± 0.31 for poly(S‐co‐HBA); r₁ = 1.62 ± 0.06 (MA); and r₂ = 0.12 ± 0.07 (HBA) for poly(MA‐co‐HBA). The photocrosslinking property of the polymers was done by using UV absorption spectroscopic technique. The rate of photocrosslinking was enhanced compared to that of the homopolymers, when the HBA was copolymerized with S and MA. Thermal stability and molecular weights (M_w and M_n) were determined for the polymer samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2494–2503, 2004     

pH‐thermoreversible hydrogels. I. Synthesis and swelling behaviors of the (N‐isopropylacrylamide‐co‐acrylamide‐co‐2‐hydroxyethyl methacrylate) copolymeric hydrogels

A series of pH‐thermoreversible hydrogels that exhibited volume phase transition was synthesized by various molar ratios of N‐isopropylacrylamide (NIPAAm), acrylamide (AAm), and 2‐hydroxyethyl methacrylate (HEMA). The influence of environmental conditions such as temperature and pH value on the swelling behavior of these copolymeric gels was investigated. Results showed that the hydrogels exhibited different equilibrium swelling ratios in different pH solutions. Amide groups could be hydrolyzed to form negatively charged carboxylate ion groups in their hydrophilic polymeric network in response to an external pH variation. The pH sensitivities of these gels also depended on the AAm content in the copolymeric gels; thus the greater the AAm content, the higher the pH sensitivity. These hydrogels, based on a temperature‐sensitive hydrogel, demonstrated a significant change of equilibrium swelling in aqueous media between a highly solvated, swollen gel state and a dehydrated network response to small variations of temperature. pH‐thermoreversible hydrogels were used for a study of the release of a model drug, caffeine, with changes in temperature. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 221–231, 1999     

Interaction of poly(maleic anhydride‐alt‐acrylic acid) with transition metal cations,Ni2+, Cu2+, and Cd2+: A study by UV–Vis spectroscopy and viscosimetry

Interactions between poly(maleic anhydride‐alt‐acrylic acid), [poly(MA‐alt‐AA)] and Cu²⁺, Ni²⁺, and Cd²⁺ ions were studied by UV–vis spectroscopy and viscosimetry. Effects of nature and the concentrations of the metal ions on the complex formation were investigated and the formation constants of each complex were determined by the mole‐ratio method. UV–vis studies showed that the complex formation tendency increased in the followed order: Cd(II) < Ni(II) < Cu(II). This order was confirmed by the Irving–William series and the Pearson's classification. The influence of metal ions on the reduced viscosity of poly(MA‐alt‐AA) increased in the following order: Cu(II) < Ni(II) < Cd(II), and this result was explained by the concentration effect. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2698–2705, 2004     

Improved synthesis of a branched poly(ethylene imine)‐modified cellulose‐based adsorbent for removal and recovery of Cu(II) from aqueous solution

This study focuses on an improved synthesis of a branched poly (ethylene imine) (PEI)‐modified cellulose‐based adsorbent (Cell‐g‐PGMA‐PEI). We aim to improve the adsorbent capacity by reducing side reaction of epoxide ring opening during graft copolymerization of glycidyl methacrylate (GMA) onto cellulose which increases the content of epoxy groups, anchors to immobilize branched PEI moieties. FTIR spectra provided the evidence of successful graft copolymerization of GMA onto cellulose initiated by benzoyl peroxide (BPO) and modification with PEI. The amount of epoxy groups of Cell‐g‐PGMA was 4.35 mmol g^?1 by epoxy titration. Subsequently, the adsorption behavior of Cu(II) on cell‐g‐PGMA‐PEI in aqueous solution has been investigated. The data from the adsorption kinetic experiments agreed well with pseudo‐second‐order model. The adsorption isotherms can be interpreted by the Langmuir model with the maximum adsorption capacity of 102 mg g^?1 which was largely improved compared with the similar adsorbent reported. The dynamic adsorption capacity obtained from the column tests was 119 mg g^?1 and the adsorbent could be regenerated by HCl of 0.1 mol L^?1. Results indicate that the novel pathway for the synthesis of Cell‐g‐PGMA‐PEI exhibits significant potential to improve the performance of adsorbents in removal and recovery of Cu(II) from aqueous solution. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(acrylamide‐allyl glycidyl ether) cryogel as a novel stationary phase in dye‐affinity chromatography

Poly(acrylamide‐allyl glycidyl ether) [poly(AAm‐AGE)] cryogel was prepared by bulk polymerization which proceeds in an aqueous solution of monomers frozen inside a glass column (cryo‐polymerization). After thawing, the monolithic cryogel contains a continuous polymeric matrix having interconnected pores of 10–100 μm size. Cibacron Blue F3GA was immobilized by covalent binding onto poly(AAm‐AGE) cryogel via epoxy groups. Poly(AAm‐AGE) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(AAm‐AGE) monolithic cryogel was 6.84 g H₂O/g cryogel. Poly(AAm‐AGE) cryogel containing 68.9 μmol Cibacron Blue F3GA/g was used in the adsorption/desorption of human serum albumin (HSA) from aqueous solutions and human plasma. The nonspecific adsorption of HSA was very low (0.2 mg/g). The maximum amount of HSA adsorption from aqueous solution in acetate buffer was 27 mg/g at pH 5.0. Higher HSA adsorption value was obtained from human plasma (up to 74.2 mg/g). Desorption of HSA with a purity of 92% from Cibacron Blue F3GA attached poly(AAm‐AGE) cryogel was achieved using 0.1M Tris/HCl buffer containing 0.5M NaCl. It was observed that HSA could be repeatedly adsorbed and desorbed with poly(AAm‐AGE) cryogel without significant loss in the adsorption capacity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Compatibilization of polypropylene/ poly(3‐hydroxybutyrate) blends

Blending polypropylene (PP) with biodegradable poly(3‐hydroxybutyrate) (PHB) can be a nice alternative to minimize the disposal problem of PP and the intrinsic brittleness that restricts PHB applications. However, to achieve acceptable engineering properties, the blend needs to be compatibilized because of the immiscibility between PP and PHB. In this work, PP/PHB blends were prepared with different types of copolymers as possible compatibilizers: poly(propylene‐g‐maleic anhydride) (PP–MAH), poly (ethylene‐co‐methyl acrylate) [P(E–MA)], poly(ethylene‐co‐glycidyl methacrylate) [P(E–GMA)], and poly(ethylene‐co‐methyl acrylate‐co‐glycidyl methacrylate) [P(E–MA–GMA)]. The effect of each copolymer on the morphology and mechanical properties of the blends was investigated. The results show that the compatibilizers efficiency decreased in this order: P(E–MA–GMA) > P(E–MA) > P(E–GMA) > PP–MAH; we explained this by taking into consideration the affinity degree of the compatibilizers with the PP matrix, the compatibilizers properties, and their ability to provide physical and/or reactive compatibilization with PHB. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Alkaline protease production by immobilized growing cells of Serratia marcescens with interpolymer complexes of P(TM‐co‐AAm)/PAA

The growing cells of Serratia marcescens (SM) were immobilized with the interpolymer complex carrier, which is formed by the cationic polymer, poly(allyltrimethyl ammonium chloride‐co‐acrylamide) [P(TM‐co‐AAm)], and poly(acrylic acid) (PAA). When the association degree of PAA is suitable to the cationic degree of P(TM‐co‐AAm), the effective crosslinking network provides the most favorable circumstances for the cell immobilization. The alkaline protease can be produced by the immobilized SM with high activity. Compared with the free cells, the immobilized SM has higher thermal stability, acid‐base stability, operational stability, and storage stability. Under the optimum immobilizing conditions, not only the living cells of SM but also thermophilic Bacillus firmus (TBF) were immobilized with the complex of P(TM‐co‐AAm)/PAA. The results show the carrier of P(TM‐co‐AAm)/PAA complex to be superior in properties to the usual carriers, such as Na‐alginate and carrageenan. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 178–183, 2002; DOI 10.1002/app.10293     

Synthesis,characterization, reactivity ratios by nuclear magnetic resonance spectroscopy,and application of (2,5‐Dichlorophenyl acrylate‐co‐glycidyl methacrylate) polymers as adhesives for the leather industry

2,5‐ Dichlorophenyl acrylate (DPA)‐co‐glycidyl methacrylate (GMA) polymers having five different compositions were synthesized in 1,4‐dioxane using benzoyl peroxide as a free‐radical initiator at 70 ± 0.5°C. Using ¹H‐NMR spectroscopy, the composition of the two monomers in the copolymers was calculated by comparing the integral values of the aromatic and aliphatic proton peaks. The reactivity ratios were calculated by Fineman–Ross (r₁ = 0.31 and r₂ = 1.08), Kelen–Tudos (r₁ = 0.40 and r₂ = 1.15), and extended Kelen–Tudos (r₁ = 0.39 and r₂ = 1.16) methods. The nonlinear error‐in‐variables model was used to compare the reactivity ratios. The copolymers were characterized by ¹H and proton decoupled ¹³C‐NMR spectroscopes. Gel permeation chromatography was performed for estimating the M_w and M_n and M_w/M_n of the poly(DPA) and copolymers (DPA‐co‐GMA: 09 : 91 and 50 : 50). Thermal stability of the homo‐ and copolymers was estimated using TGA [poly(DPA) > DPA‐co‐GMA (50 : 50) > DPA‐co‐GMA (09:91)], while DSC was utilized for determining the glass transition temperature. T_g increased with increased DPA content in the copolymer. The 50 : 50 mol % copolymer was chosen for curing with diethanolamine in chloroform. The cured resins were tested for the adhesive properties on leather at different temperatures (50, 90, 100, and 110°C). The resin cured at 50 °C exhibited a maximum peel strength of 1.6 N/mm, revealing a good adhesive behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1167–1174, 2006     

Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self‐same nanocomposites

We present a strategy for stabilizing the morphological integrity of electrospun polymeric nanofibers by heat stimuli in situ crosslinking. Amorphous polymer nanofibers, such as polystyrene (PS) and its co‐polymers tend to lose their fiber morphology during processing at temperatures above their glass transition temperature (T_g) typically bound to happen in nanocomposite/structural composite applications. As an answer to this problem, incorporation of the crosslinking agents, phthalic anhydride (PA) and tributylamine (TBA), into the electrospinning polymer solution functionalized by glycidylmethacrylate (GMA) copolymerization, namely P(St‐co‐GMA), is demonstrated. Despite the presence of the crosslinker molecules, the electrospinning polymer solution is stable and its viscosity remains unaffected below 60 °C. Crosslinking reaction stands‐by and can be thermally stimulated during post‐processing of the electrospun P(St‐co‐GMA)/PA‐TBA fiber mat at intermediate temperatures (below the T_g). This strategy enables the preservation of the nanofiber morphology during subsequent high temperature processing. The crosslinking event leads to an increase in T_g of the base polymer by 30 °C depending on degree of crosslinking. Crosslinked nanofibers are able to maintain their nanofibrous morphology above the T_g and upon exposure to organic solvents. In situ crosslinking in epoxy matrix is also reported as an example of high temperature demanding application/processing. Finally, a self‐same fibrous nanocomposite is demonstrated by dual electrospinning of P(St‐co‐GMA) and stabilized P(St‐co‐GMA)/PA‐TBA, forming an intermingled nanofibrous mat, followed by a heating cycle. The product is a composite of crosslinked P(St‐co‐GMA)/PA‐TBA fibers fused by P(St‐co‐GMA) matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44090.     

Immobilization of chymotrypsin with interpolymer complexes of P(TM‐co‐AAm)/PAA

Chymotrypsin was immobilized with interpolymer complexes formed by the cationic polymer poly(allyltrimethyl ammonium chloride‐co‐acrylamide) [P(TM‐co‐AAm)] and poly(acrylic acid) (PAA). The introduction of a small amount of cationic groups led to a much stronger polymer–polymer interaction between P(TM‐co‐AAm) and PAA. The characteristic pH sensitivity of this kind of complex provided the possibilities of controlling the activity of the immobilized enzyme and separating the immobilized enzyme from the batch by changing the pH of the medium. Compared with the free enzyme, the immobilized chymotrypsin had higher thermal stability, acid–base stability, and stability in use. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2013–2018, 2001     

Synthesis of monodisperse nonporous crosslinked poly(glycidyl methacrylate) particles with metal affinity ligands for protein adsorption

Monodisperse nonporous crosslinked poly(glycidyl methacrylate) (PGMA) particles with immobilized metal affinity ligands were prepared for selective recovery of proteins. The PGMA particles, with an average size of 2.2 µm, were prepared by a simple dispersion polymerization of glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA). The particles were characterized by scanning electron microscopy (SEM) and Fourier‐transform infrared spectroscopy (FTIR). The epoxy groups of the particles were modified with the metal chelating agent iminodiacetic acid (IDA), which forms metal–IDA chelates at the active sites. After charging with copper ions, the particles were used to recover a model protein, bovine hemoglobin (BHb), in a batchwise manner. The particles had the adsorption capacity of 218.7 mg g⁻¹ with little nonspecific adsorption. The adsorption behavior could be described with the Langmuir equation. The effect of pH on the adsorption was also studied. Regeneration of the metal‐chelated particles was easily performed with 50 mmol L⁻¹ ethylenediaminetetraacetic acid (EDTA), followed by washing with water and reloading with Cu²⁺. The particles could be very useful as an affinity separation adsorbent. Copyright © 2005 Society of Chemical Industry     

Preparation and characterization of poly(N‐tert‐butylacrylamide‐co‐acrylamide) ferrogel

Magnetic‐field‐sensitive gel, called ferrogel, was prepared by a two‐step procedure in which first step requires synthesis of the poly(N‐tert‐butylacrylamide‐co‐acrylamide) [P(NTBA‐co‐AAm)] hydrogel and during second step magnetite (Fe₃O₄) particles were formed in the hydrogel via coprecipitation of Fe(II) and Fe(III) ions in alkaline medium at 70°C. The obtained ferrogel was characterized by attenuated total reflectance Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy combined with energy dispersive spectroscopy, and electron spin resonance measurements. The magnetic responsive of the ferrogel was also investigated by applying magnetic field to the ferrogel. The extent of a bending degree of the ferrogel depends on the applied magnetic field strength. In addition, the magnetic responsive studies also indicated that formed magnetite content in the hydrogel is high enough to achieve considerable magnetic response to external magnetic field. As a result, the P(NTBA‐co‐AAm) ferrogel may be useful for potential applications in magnetically controlled drug release systems, magnetic‐sensitive sensors, and pseudomuscular actuators. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(glycidyl methacrylate‐co‐3‐thienyl‐methylmethacrylate) based working electrodes for hydrogen peroxide biosensing

BACKGROUND: Hydrogen peroxide biosensors based on Poly(glycidyl methacrylate‐co‐3‐thienylmethylmethacrylate)/ Polypyrrole [Poly(GMA‐co‐MTM)/PPy] composite film were reported. Poly(GMA‐co‐MTM) including various amounts of GMA and MTM monomers was synthesized via the radical polymerization. Enzyme horseradish peroxidase (HRP) was trapped in Poly(GMA‐co‐MTM)/PPy composites during the electropolymerization reaction between pyrrole and thiophene groups of MTM monomer, and chemically bonded via the epoxy groups of GMA. Analytical parameters of the fabricated electrodes were calculated and are discussed in terms of film electroactivity and mass transfer conditions of the composite films. RESULTS: The amount of electroactive HRP was found to be 1.25, 0.34 and 0.213 µg for the working electrodes of Poly(GMA_30%‐ co‐MTM_70%)/PPy/HRP, Poly(GMA_85%‐co‐MTM_15%)/PPy/HRP and Poly(GMA_90%‐co‐MTM_10%)/PPy/HRP, respectively. Optimal response of the fabricated electrodes was obtained at pH 7 and an operational potential of ? 0.35 V. It was observed that effective enzyme immobilization and electroactivity of the composite films could be changed by changing the ratios of GMA and MTM fractions of Poly(GMA‐co‐MTM) based working electrodes. CONCLUSION: The amount of electroactive enzyme increases with increasing MTM content of the final copolymer. High operational stabilities of the biosensors can be attributed to the strong covalent enzyme linkage via the epoxy groups of GMA due to preventing enzyme deterioration and loss. A more convenient microenvironment for mass transfer was provided for the electrodes by higher GMA ratios. It is observed that mass transfer is dominated by the mechanism of electron transfer to obtain effective sensitivity values. This work contributes to discussions clarifying the problems regarding the design parameters of biosensors. Copyright © 2011 Society of Chemical Industry