Mechanical and dynamic mechanical studies of resol/vinyl acetate‐2‐ethylhexylacrylate/ hexamethoxymethylmelamine interpenetrating network systems

Resol was solution blended with vinyl acetate–2‐ethylhexylacrylate (VAc–EHA) resin in aqueous medium, in varying weight fractions, with hexamethoxymethylmelamine (HMMM) as crosslinker, and data was compared with a control. The present work was aimed at getting an optimum combination of tensile strength, dynamic mechanical strength, impact strength, and toughness by synthesis of an interpenetrating network (IPN) of the resins. The control gave a semi‐IPN system, in which the resol crosslinked, while the acrylic did not, whereas the blend, where HMMM was the crosslinker, gave a full IPN system. Full IPNs of the resol/VAc–EHA system had higher moduli and ultimate tensile strength than the semi‐IPNs. Dynamic mechanical study showed that full IPN systems have higher T_g values than semi‐IPN systems. The impact strength increases with increasing proportions of VAc–EHA copolymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1765–1771, 2003     

Mechanical and dynamic mechanical studies of epoxy/VAc‐EHA/HMMM IPN–jute composite systems

Epoxy [50:50 mixture of Di‐Glycidyl Ether of Bis‐Phenol A (DGEBA) and Epoxidized Novolac (EPN)] was solution blended with Vinyl Acetate‐2‐ Ethylhexylacrylate (VAc‐EHA) resin in aqueous medium, in varying weight fractions, with Hexamethoxymethylmelamine (HMMM) as a crosslinker and data was compared with a control. The present work was aimed to optimize the tensile strength, dynamic mechanical strength, impact strength, and toughness by preparing a blend followed by jute composites of a semi‐ and full interpenetrating network (IPN). In control experiments epoxy alone was crosslinked (semi‐IPN), whereas the DGEBA‐EPN and VAc‐EHA/HMMM were crosslinked separately (full‐IPN), using jute as the substrate for making composites. Composites of full‐IPN systems of epoxy/VAc‐EHA system had higher moduli and UTS than the semi‐IPN systems. Dynamic mechanical study showed that full‐IPN systems have higher T_g values than semi‐IPN systems. The impact strength increases with increasing proportions of VAc‐EHA copolymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 958–963, 2004     

Impact behavior of unidirectional polyethylene–glass fibers: Resol/vinyl acetate‐2‐ethylhexylacrylate interpenetrating polymer network systems

Resol was solution blended with vinyl acetate‐2‐ethylhexylacrylate (VAc–EHA) resin in an aqueous medium at a 90‐10 w/w ratio with hexamethoxymethylmelamine (HMMM) as crosslinker. Here we aimed to study the impact behavior of unidirectional laminates cast from (Resol/VAc–EHA/HMMM)/glass fiber (GF), (Resol/VAc–EHA/HMMM)/polyethylene fiber (PEF), and (Resol/VAc–EHA/HMMM)/GF/PEF (hybrid) and to study the role of PEF ply/plies in hybrid laminates toward the impact behavior, as dependent on the relative position of the ply/plies. A brittle failure mode was observed in the GF‐reinforced laminates, which tended to the ductile failure mode, with the incorporation of PEF ply/plies. Again, the impact fracture mode of GF was minimized by the placement of PEF ply/plies at the impacted side of the hybrid laminates. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 339–342, 2004     

Curing and mechanical properties of dicyanate/poly(ether sulfone) semi‐interpenetrating polymer networks

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of a dicyanate resin and a poly(ether sulfone) (PES) were prepared, and their curing behavior and mechanical properties were investigated. The curing behavior of the dicyanate/PES semi‐IPN systems catalyzed by an organic metal salt was analyzed. Differential scanning calorimetry was used to study the curing behavior of the semi‐IPN systems. The curing rate of the semi‐IPN systems decreased as the PES content increased. An autocatalytic reaction mechanism was used to analyze the curing reaction of the semi‐IPN systems. The glass‐transition temperature of the semi‐IPNs decreased with increasing PES content. The thermal decomposition behavior of the semi‐IPNs was investigated. The morphology of the semi‐IPNs was investigated with scanning electron microscopy. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1079–1084, 2003     

Thermal characteristics of IPNs composed of polyallylamine and chitosan

Interpenetrating polymer network (IPN) hydrogels composed of polyallylamine and chitosan were synthesized by radical polymerization using 2,2‐dimethyl‐2‐ phenylacetophenone (DMPAP) and methylene bisacrylicamide (MBAAm) as initiator and crosslinker, respectively. The IPNs thus obtained were characterized by using Fourier transform infrared (FT‐IR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). The melting temperatures of IPNs were observed with increasing chitosan content by DSC. DEA was employed to ascertain the glass transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_gs indicating the presence of phase separation in the IPN. The thermal decomposition of IPNs was investigated by TGA and appeared at near 270 °C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1956–1960, 2002     

Thermal characteristics of poly(vinyl alcohol) and poly(vinylpyrrolidone) IPNs

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and 1‐vinyl‐2‐pyrrolidone (VP) were prepared by radical polymerization using 2,2‐dimethyl‐2‐phenylacetophenone (DMPAP) and methylene bisacrylicamide (MBAAm) as initiator and crosslinker, respectively. The thermal characterization of the IPNs was investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). Depressions of the melting temperatures of PVA segments in IPNs were observed with increasing VP content via the DSC. The DEA was employed to ascertain the glass transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_gs indicating the presence of phase separation in the IPN. The thermal decomposition of IPNs was investigated using TGA and appeared at near 270°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1844–1847, 2002     

Electrically conductive semi‐IPNs based on polyaniline and crosslinked polyvinylacetate

Electrically conductive semi‐IPNs based on polyaniline and crosslinked polyvinylacetate were prepared. Polyaniline successfully percolated through the crosslinked PVAc networks and the resulting semi‐IPNs show a continuous network morphology. The conductivity of the semi‐IPN increases with increasing content of polyaniline and increasing acidity used during the polymerization of the polyaniline. The conductivity of the semi‐IPN is 0.13 S/cm, with the highest polyaniline content of 19.3 wt %. The depression of polyaniline with temperature change is smallest followed by the depression of semi‐IPN of the polyaniline/crosslinked polyvinylacetate, which is considerably smaller than the depression of crosslinked polyvinylacetate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2287–2293, 2002     

Water and temperature response of semi‐IPN hydrogels composed of chitosan and polyacrylonitrile

Temperature‐responsive semi‐interpenetrating polymer networks (semi‐IPNs) constructed with chitosan and polyacrylonitrile (PAN) were crosslinked with glutaraldehyde. The semi‐IPN determined the sorption behavior of water at several temperatures and at a relative humidity (RH) of 95% using a dynamic vapor sorption (DVS) system. Water diffusion coefficients of semi‐IPNs were calculated according to the Fickian Law at several temperatures and exhibited a relatively water uptake, 0.1–0.4 at room temperature. The water uptake of hydrogels depended on temperature. The apparent activation energy was dependent of the composition of the semi‐IPN with value of 32.8–34.8 kJmol^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 12: 2721–2724, 2003     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

Insolubilization of sodium chondroitin sulfate by forming a semi‐interpenetrating polymer network with acrylic acid: A potential carrier for colon‐specific drug delivery

To reduce the highly hydrophilic property of chondroitin sulfate (ChS), a semi‐interpenetrating polymer network (semi‐IPN) of chondroitin sulfate/polyacrylic acid (PAA) was prepared as a drug carrier by crosslinking acrylic acid with diethyleneglycol diacrylate. The swelling properties of the semi‐IPNs with different concentrations of crosslinking agent were correlated. The moisture sorption profiles were evaluated using differential thermal analysis. Ketoprofen was used as a drug probe to evaluate the performance of the drug released from the semi‐IPN matrices. The prepared semi‐IPNs demonstrated significant swelling reduction properties with both gastric and intestinal fluids compared with those of both the pure ChS and the ChSAA blend without the crosslinking agent. The amount of accumulated drug released from the semi‐IPNs was less than 30 wt % at pH 1.2 and up to 80 wt % at pH 7.4. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 114–122, 2002     

Synthesis and characterization of modified bismaleimide/polysulfone semi‐interpenetrating polymer networks

The present work reports a new method of preparing semi‐interpenetrating polymer network (semi‐IPN) membranes through in situ polymerization of bismaleimide (BMI) within polysulfone (PSF). It was found that BMI could be polymerized at ambient conditions in the presence of a proton donor and PSF without the use of an initiator or a catalyst. Chemical structure characterization of these semi‐IPNs by Fourier transform infrared attenuated total reflection (FTIR‐ATR) revealed the possibility of imide cleavage and formation of amic acid when BMI polymerization was continued for a longer time while X‐ray photoelectron spectroscopy (XPS) revealed the protonation of imide nitrogen at shorter polymerization time. It was also found that size of thermoset BMI phase within the PSF thermoplastic has a significant impact on glass‐transition temperature of resulting semi‐IPN. By controlling the thermoset/thermoplastic phase separation of semi‐IPNs through dope composition and formation techniques, gas separation membranes with comparable selectivity and permeance that were up to 12 times higher than corresponding PSF membranes were formed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 369–379, 2006     

Thermal characterizations of semi‐interpenetrating polymer networks composed of poly(ethylene oxide) and poly(N‐isopropylacrylamide)

Poly(N‐isopropylacrylamide) (PNIPAAm)/poly(ethylene oxide) (PEO) semi‐interpenetrating polymer networks (semi‐IPNs) synthesized by radical polymerization of N‐isopropylacrylamide (NIPAAm) in the presence of PEO. The thermal characterizations of the semi‐IPNs were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). The melting temperature (T_m) of semi‐IPNs appeared at around 60°C using DSC. DEA was employed to ascertain the glass transition temperature (T_g) and determine the activation energy (E_a) of semi‐IPNs. From the results of DEA, semi‐IPNs exhibited one T_g indicating the presence of phase separation in the semi‐IPN, and T_gs of semi‐IPNs were observed with increasing PNIPAAm content. The thermal decomposition of semi‐IPNa was investigated using TGA and appeared at around 370°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3922–3927, 2003     

Cure kinetics and physical properties of dicyanate/polyetherimide semi‐IPNs

The curing behavior and physical properties of dicyanate/polyetherimide (PEI) semi‐interpenetrating polymer network (IPN) systems were investigated. Differential scanning calorimetry (DSC) was used to study the curing behavior of the dicyanate/PEI semi‐IPN systems. The curing rate of the semi‐IPN system decreased as the PEI content increased. An autocatalytic reaction mechanism can describe well the curing kinetics of the semi‐IPN systems. The reaction kinetic parameters were determined by fitting DSC conversion data to the kinetic equation. The glass transition temperature of the semi‐IPNs decreased with increasing PEI content. Two glass transitions due to phase‐separated morphology were observed for the semi‐IPN containing over 15 phr (parts per hundred parts of dicyanate resin) PEI. The thermal stability and dynamic mechanical properties of the semi‐IPNs were measured by thermal analysis.     

Damping Properties of Polyorganosiloxane/Poly(methyl methacrylate) Interpenetrating Networks

Interpenetrating polymer networks (IPNs) based on polyorganosiloxane/poly(methyl methacrylate) were prepared via sequential polymerization and the damping and mechanical properties of these materials were studied. The effects of crosslinking in both the first‐ and second‐formed networks were investigated. The experimental results show that the extent of damping of the IPNs was decreased and shifted to higher temperature as the content of poly(methyl methacrylate) was increased; the mechanical properties such as tensile strength and hardness (Shore A) were increased with increasing poly(methyl methacrylate) (PMMA) content. The loss factor peak becomes narrower with increasing crosslinker level in the first‐formed network (polysiloxane network), while increasing crosslinker content in the second‐formed network (PMMA network) results in a broadening of the IPN transition peak and moves the IPN transition to higher temperatures as well.     

pH/temperature‐responsive semi‐IPN hydrogels composed of alginate and poly(N‐isopropylacrylamide)

Amino semitelechelic poly(N‐isopropylacrylamide) (PNIPAAm) was prepared by radical polymerization with aminoethanethiol hydrochloride as a chain‐transfer agent. Semi‐interpenetrating polymer network (semi‐IPN) hydrogels, composed of alginate and amine‐terminated PNIPAAm, were prepared by crosslinking with calcium chloride. From the swelling behaviors of semi‐IPNs at various pH's and Fourier transform infrared spectra at high temperatures, the formation of a polyelectrolyte complex was confirmed from the reaction between carboxyl groups in alginate and amino groups in modified PNIPAAm. Semi‐IPN hydrogels reached an equilibrium swelling state within 24 h. The water state in hydrogels, investigated by differential scanning calorimetry, showed that sample CAN55 [alginate/PNIPAAm (w/w) = 50/50] exhibited the lowest equilibrium water content and free water content among the hydrogels tested, which was attributed to its more compact structure compared to other samples and the high content of interchain bonding within the hydrogels. Alginate/PNIPAAm semi‐IPN hydrogels exhibited a reasonable sensitivity to the temperature, pH, and ionic strength of swelling medium. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1128–1139, 2002     

Synthesis and characteristics of the interpenetrating polymer network hydrogel composed of chitosan and polyallylamine

A temperature‐ and pH‐dependent hydrogel was studied with interpenetrating polymer network (IPN) hydrogels constructed with water‐insoluble chitosan and polyallylamine. Various IPNs were prepared from different weight ratios of chitosan–polyallylamine. Crosslinked‐IPN hydrogels exhibited relatively high equilibrium water content (EWC) in the range 80–83%. The EWC of IPN hydrogels depended on pH and the amount of complex, which is the content of chitosan and polyallylamine. The differential scanning calorimeter (DSC) thermogram of fully swollen IPN hydrogels appeared between 3 to 4 °C. The IPNs exhibited two glass‐transition temperatures (T_gs), indicating the presence of phase separation in the IPNs as exhibited by dielectric analysis (DEA). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 498–503, 2002     

Synthesis and characterization of biodegradable interpenetrating polymer networks based on gelatin and divinyl ester synthesized from poly(caprolactone diol)

This article describes the synthesis and characterization of interpenetrating polymer networks (IPNs) from hydrophilic and hydrophobic polymers using emulsification technique. Tween 20 (0.001 wt % of gelatin) was employed as emulsifier for the preparation of semi and full IPNs. Gelatin (G), a hydrophilic component was crosslinked by glutaraldehyde (Glu) and divinyl ester (DVE), a hydrophobic component was polymerized/crosslinked using 3 mol % of AIBN as an initiator. Structural characterization was done using FTIR (doublet at 1620 and 1636 cm^?1) and NMR (signals in the range of δ = 5–7 ppm), which confirmed the formation of DVE. Several samples were prepared by varying the ratio of gelatin : DVE (w/w) and the Glu concentration. The swelling characteristics (as a function of varying pH maintained using buffers) and degradation behavior (in phosphate buffer saline pH 7.4) of hydrogels was studied to investigate the effect of composition and crosslinker concentration. Percent water uptake decreased from 496 to 181 at pH 7.4 and pH 6.5 in IPNs as the concentration of DVE increased from 0.3 g to 0.7 g per g of gelatin. Semi‐IPNs, where DVE was not polymerized, demonstrated higher swelling at pH 7.4 in contrast to pH 6.5 irrespective of Glu concentration. Gelatin hydrogels degraded within 180 h and IPNs degraded within 290 h whereas DVE did not degrade till the study period of 20 days. The formation of IPN was confirmed by thermal characterization (DSC, TGA) and scanning electron microscopy (SEM). Observation of cross‐sectional microstructure of disrupted honeycomb of Gx into closely packed fiber‐like structure upon interpenetration by SEM clearly suggests the formation of IPN. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Swelling and diffusion characteristics of novel semi‐interpenetrating network hydrogels composed of poly[(acrylamide)‐ co‐(sodium acrylate)] and poly[(vinylsulfonic acid), sodium salt]

A series of novel semi‐interpenetrating polymer networks (IPNs) composed of poly[(acrylamide)‐co‐(sodium acrylate)] with varying amounts (5, 10, and 15 wt%) of poly[(vinylsulfonic acid), sodium salt] was synthesized. The semi‐IPN hydrogels were characterized by infrared spectroscopy. The swelling behavior of these IPNs was studied in distilled water/physiological solutions/buffer solutions/salt solutions. As the amount of poly[(vinylsulfonic acid), sodium salt] increased in the network, the swelling capacity of the semi‐IPNs increased considerably. The swelling and diffusion characteristics such as water penetration velocity (v), diffusion exponent (n), and diffusion coefficient (D) were calculated in distilled water, as well as in other physiological solutions. The highest swelling capacity was noted in urea and glucose solutions. The semi‐IPN hydrogels followed non‐Fickian diffusion behavior in water and physiological fluids, whereas Fickian behavior was observed in buffer solutions. The stimuli‐responsive characteristics towards physiological fluids, salt concentration, and temperature of these semi‐IPN hydrogels were also investigated. The swelling behavior of the semi‐IPNs decreased markedly with an increase of the concentration of the salt solutions. Copyright © 2006 Society of Chemical Industry     

Preparation of alginate/poly(N‐isopropylacrylamide) semi‐interpenetrating and fully interpenetrating polymer network hydrogels with γ‐ray irradiation and their swelling behaviors

Semi‐interpenetrating polymer network (semi‐IPN) and fully interpenetrating polymer network (full‐IPN) hydrogels composed of alginate and poly(N‐isopropylacrylamide) were prepared with γ‐ray irradiation. The semi‐IPN hydrogels were prepared through the irradiation of a mixed solution composed of alginate and N‐isopropylacrylamide (NIPAAm) monomer to simultaneously achieve the polymerization and self‐crosslinking of NIPAAm. The full‐IPN hydrogels were formed through the immersion of the semi‐IPN film in a calcium‐ion solution. The results for the swelling and deswelling behaviors showed that the swelling ratio of semi‐IPN hydrogels was higher than that of full‐IPN hydrogels. A semi‐IPN hydrogel containing more alginate exhibited relatively rapid swelling and deswelling rates, whereas a full‐IPN hydrogel showed an adverse tendency. All the hydrogels with NIPAAm exhibited a change in the swelling ratio around 30–40°C, and full‐IPN hydrogels showed more sensitive and reversible behavior than semi‐IPN hydrogels under a stepwise stimulus. In addition, the swelling ratio of the hydrogels continuously increased with the pH values, and the swelling processes were proven to be repeatable with pH changes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4439–4446, 2006     

Characterization of hydrogels based on chitosan and copolymer of poly(dimethylsiloxane) and poly(vinyl alcohol)

Copolymers composed of poly(vinyl alcohol) (PVA) and poly(dimethylsiloxane) (PDMS) were crosslinked with chitosan to prepare semi‐interpenetrating polymer network (IPN) hydrogels by an ultraviolet (UV) irradiation method for application as potential biomedical materials. PVA/PDMS copolymer and chitosan was cast to prepare hydrogel films, followed by a subsequent crosslinking with 2,2‐dimethoxy‐2‐phenylacetophenone as a nontoxic photoinitiator by UV irradiation. Various semi‐interpenetrating polymer networks (semi‐IPNs) were prepared from different weight ratios of chitosan and the copolymer of PVA/PDMS. Photocrosslinked hydrogels exhibited an equilibrium water content (EWC) in the range of 65–95%. Swelling behaviors of these hydrogels were studied by immersion of the gels in various buffer solutions. Particularly, the PCN13 as the highest chitosan weight ratio in semi‐IPN hydrogels showed the highest EWC in time‐dependent and pH‐dependent swelling. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2591–2596, 2002