Kinetics and simulation of the imidization of poly(styrene‐co‐maleic anhydride) with amines

The imidization of poly(styrene‐co‐maleic anhydride) with amines may improve some of its end‐use properties. The objective of this study was to examine the mechanism and kinetics with aniline (ANL) as an amine of the preparation of poly(styrene‐co‐N‐phenyl maleimide). The reaction was carried out in a tetrahydrofuran solution at 25–55°C and in an ethylbenzene solution at 85–120°C. The extent of the reaction was determined by conductance titration, a new and simple method. Two consecutive reactions were involved in the imidization: ring opening to produce an acido‐amide group and ring closing to form a corresponding imide group. The imidization rate was greatly influenced by the reaction temperature and the molar ratio of ANL to the anhydride. A model for the imidization kinetics over a wide range of reaction temperatures and concentration ranges was developed and validated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2744–2749, 2006     

Synthesis of ultrafine poly(styrene‐maleic anhydride) and polystyrene fibers by electrospinning

Fiber formation from atactic polystyrene (aPS) and alternating poly(styrene‐maleic anhydride) (PSMA) synthesized by free radical polymerization (AIBN, 90°C, 4 h) were investigated by electrospinning from various solutions. aPS was soluble in dimethylformamide (DMF), tetrahydrofuran (THF), toluene, styrene, and benzene, whereas PSMA was soluble in acetone, DMF, THF, dimethylsulfoxide (DMSO), ethyl acetate, and methanol. aPS fibers could be electrospun from 15 to 20% DMF and 20% THF solutions, but not from styrene nor toluene. PSMA, on the other hand, could be efficiently electrospun into fibers from DMF and DMSO at 20 and 25%, respectively. Few PSMA fibers were, however, produced from acetone, THF, or ethyl acetate solutions. Results showed that solvent properties and polymer–solvent miscibility strongly influenced the fiber formation from electrospinning. The addition of solvents, such as THF, generally improved the fiber uniformity and reduced fiber sizes for both polymers. The nonsolvents, however, had opposing effects on the two polymers, i.e., significantly reducing PSMA fiber diameters to 200 to 300 nm, creating larger and irregularly shaped aPS fibers. The ability to incorporate the styrene monomer and divinylbenzene crosslinker in aPS fibers as well as to hydrolyze PSMA fibers with diluted NaOH solutions demonstrated potential for post‐electrospinning reactions and modification of these ultrafine fibers for reactive support materials. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Variations of the glass‐transition temperature in the imidization of poly(styrene‐co‐maleic anhydride)

The imidization of poly(styrene‐co‐maleic anhydride) (SMA) was conducted, and the glass‐transition temperatures (T_g's) of the resulting products were measured with differential scanning calorimetry. The contributions from functional groups of maleic anhydride, N‐phenylmaleamic acid, and N‐phenylmaleimide to T_g were examined. T_g increased in the order of SMA < styrene–N‐phenyl maleimide copolymer < styrene–N‐phenyl maleamic acid copolymer and followed the Fox equation. T_g of the imidized products of SMA could be controlled by the conversions of both ring‐opening and ring‐closing reactions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2418–2422, 2007     

Direct polymer reaction of poly(styrene‐co‐maleic anhydride): Polymeric imidization

Using direct polymer reaction of poly(styrene‐co‐maleic anhydride) (SMA), a synthesis of copolymer of styrene and N‐aryl succinimide (SMI) has been investigated. SMI copolymers were synthesized from SMA copolymers by a concerted two‐step reaction, which consisted of the condensation reaction (step 1) of SMA with aromatic amine to prepare a precursor, succinamic acid, for imide formation and the cyclodehydration reaction (step 2) of succinamic acid. In this article, the application of Searle's preparation method of N‐aryl or N‐alkyl maleimide to the direct polymer reaction for SMI was attempted. Compared with synthesis of monomeric imides, the imide formation in polymeric condition appeared to be a little more sensitive to the reaction condition. The optimum condition for maximum conversion was examined in terms of time, temperature, and the amount of reactants. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1187–1196, 1999     

Liquid crystallization of poly(styrene‐co‐maleic anhydride) induced by intermolecular hydrogen bonds

The liquid crystallization of general polymer (GP) with maleic anhydride in the main chain has been realized through molecular recognition and self‐assembly based on intermolecular hydrogen bonds. Poly[styrene‐co‐(N‐4‐carboxylphenyl)maleimide] (SMIBA) was synthesized by imidization and dehydration of Poly(styrene‐co‐maleic anhydride) (SMA) with p‐aminobenzoic acid (ABA) for use as an H‐bonded donor polymer. 4‐Methoxy‐4′‐stilbazole (MSZ) and 4‐nitro‐4′‐stilbazole (SZNO₂) were prepared as an H‐bonded acceptor. SMIBA was complexed with MSZ or SZNO₂ by slow evaporation from pyridine solution to form a self‐assembly, which exhibits the mesophase, while neither of the individual components is mesogenic. The phase diagrams of a variety of mixtures between of SMIBA and stilbazoles have been established using DSC and POM. They show complete miscibility and high thermal stability of the liquid crystalline phase over the whole composition range. The tuning of liquid crystalline properties was achieved by changing the composition of the mixture and involving it with a mixture of SZNO₂ and MSZ. IR measurements strongly support the existence of an H‐bonded complex between the carboxylic acid of SMIBA and the pyridine group of stibazoles. Unlike conventional side‐chain liquid crystalline polymer (SLCP), supramolecular SLCP with a lower molecular weigh polymeric donor has higher thermal stability of the liquid crystalline phase due to the microphase separated in the hydrogen bonding case. Liquid crystallization of GP, such as SMA, induced by hydrogen bonds, offers a new route to prepare functional material with controlled molecular architecture from readily accessible and simpler precursors. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 97–105, 1999     

顺酐化聚苯乙烯对PVC/SEBS共混物的增容作用

以顺酐化聚苯乙烯(PS-g-MAH)为增容剂,研究了苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物(SEBS)对聚氯乙烯(PVC)的共混增韧改性,讨论了该共混物在常温、低温下的力学性能及动态力学性能。结果表明,PS-g-MAH能明显改善SEBS与PVC的相容性,使PVC/SEBS共混物中分散相颗粒尺寸明显减小,分布更均匀,共混物的玻璃化转变温度内移,常温和低温下缺口冲击强度增大。当PVC/PS-g-MAH/SEBS(质量比)为75/6/25时,共混物的常温缺口冲击强度为50.6 kJ/m2,低温(-20℃)缺口冲击强度为29.8 kJ/m2。     

Preparation of poly(styrene‐b‐2‐hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization

Reverse iodine transfer polymerizations (RITP) of 2‐h‐ydroxyethyl acrylate (HEA) were performed in N,N‐dimethylformamide at 75°C using AIBN as initiator. Poly(2‐hydroxyethyl acrylate) (PHEA) with M_n = 3300 g mol^?1 and M_w/M_n <1.5 were obtained. Homopolymerization of styrene in RITP was also carried out under similar conditions using toluene as solvent. The resulting iodo‐polystyrene (PS‐I) with (M_{n, SEC} = 607 g mol^?1, polydispersity index (PDI) = 1.31) was used as a macroinitiator for the synthesis of amphiphilic block copolymers based on HEA with controlled well‐defined structure. Poly(styrene‐b‐2‐hydroxyethyl acrylate) (PS‐b‐PHEA) with M_n = 13,000 g mol^?1 and polydispersity index (M_w/M_n) = 1.4 was obtained, copolymer composition was characterized using ¹H‐NMR and FTIR, whereas SEC and gradient HPLC were used to confirm the formation of block copolymer and the living character of polymer chains. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of monodisperse crosslinked poly(styrene‐co‐divinylbenzene) microspheres by precipitation polymerization in acetic acid

Poly(styrene‐co‐divinylbenzene) microspheres with size ranging from 1.6 to 1.8 μm were prepared in acetic acid by precipitation polymerization. The particle size and particle size distribution were determined by laser diffraction particle size analyzer, and the morphology of the particles was observed with scanning electron microscope. Besides, effects of various polymerization parameters such as initiator and total monomer concentration, divinylbenzene (DVB) content, polymerization time and polymerization temperature on the morphology and particle size were investigated in this article. In addition, the yield of microspheres increased with the increasing total monomer concentration, initiator loading, DVB concentration and polymerization time. In addition, the optimum polymerization conditions for synthesis of monodisperse crosslinked poly(styrene‐co‐divinylbenzene) microspheres by precipitation polymerization in acetic acid were obtained. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and properties of PC/SAN alloy modified with styrene‐ethylene‐butylene‐styrene block copolymer

A polycarbonate (PC)/ poly (styrene‐co‐acrylonitrile) (SAN) alloy modified with styrene‐ethylene‐butylene‐styrene (SEBS) block copolymer was prepared and the influence of SEBS content, PC content, and types of modifier on Izod notched impact strength, tensile strength, flexural strength, and Vicat softening temperature was studied. The results showed that the addition of SEBS could obviously increase the Izod notched impact strength and the elongation at break and decrease the tensile and flexural strength and Vicat softening temperature. PC/SAN alloy modified with SEBS had better mechanical properties than the PC/SAN alloy modified with ABS. DSC analysis and SEM photographs revealed that the SEBS was not only distributed in the SAN phase but also distributed in PC phase in a PC/SAN/SEBS alloy while the ABS was mainly distributed in SAN phase in a PC/SAN/ABS alloy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterization of alkali‐modified styrene‐maleic anhydride copolymer for dispersion of TiO2

A copolymer of styrene and maleic anhydride was synthesized by free radical polymerization at 80°C using N,N‐dimethylformamide (DMF) as solvent and benzoylperoxide as initiator. The monomer feed ratio of styrene to maleic anhydride was varied in the range of 1 : 1 : to 3 : 1. The polymer yield was found to decrease with increase in styrene in the feed. The molecular weight of copolymers which were formed by taking styrene to maleic anhydride ratio of 1 : 1, 2 : 1, and 3 : 1, as determined by Ostwald Viscometery were about 1862, 2015, and 2276 respectively. The acid values of abovementioned three copolymers were found to be 480, 357, and 295, respectively. The typical viscosity values of 20% solids in ammonical solution of copolymers formed by taking feed ratios of Sty : MAn as 1 : 1 and 2 : 1 were 26 and 136 cp, respectively. For the feed ratio 3 : 1, a gel was formed. The synthesized copolymers were hydrolyzed by alkalis, namely, NaOH, KOH, and NH₄OH. The dispersing ability of hydrolyzed styrene‐maleic anhydride (SMA) copolymers for dispersion of titanium dioxide was studied. The modified SMA copolymers were found to be effective dispersants for TiO₂. Among the three alkalis studied, the Sodium salts of SMA were found to give better dispersion. The copolymer having a 1 : 1 feed ratio showed the best dispersing ability for TiO₂ particles among the three ratios studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3194–3205, 2007     

The effect of poly(ethylene‐alt‐maleic anhydride) on the reduction crystallisation behaviour of nickel powder

The effect of poly(ethylene‐alt‐maleic anhydride) (EMA), an additive used in nickel powder precipitation, has been studied using sodium hypophosphite as a reducing agent. Reduction experiments were conducted using a 10 L stainless steel batch reactor. The effect of EMA was investigated by studying the evolution of the particle size distribution (PSD) and its derived moments, specific surface area, rate of reduction, pH–redox potential and elemental composition of the powder product. EMA has been found to act as a reduction catalyst and anti‐agglomerating agent. The major particulate processes identified were size dependent aggregation, molecular growth and breakage. © 2012 Canadian Society for Chemical Engineering     

Enhanced dynamic mechanical and shape‐memory properties of a poly(ethylene terephthalate)–poly(ethylene glycol) copolymer crosslinked by maleic anhydride

Dimethyl terephthalate (DMT) and ethylene glycol (EG) were used for the preparation of poly(ethylene terephthalate) (PET), and poly(ethylene glycol) (PEG) was added as a soft segment to prepare a PET–PEG copolymer with a shape‐memory function. MWs of the PEG used were 200, 400, 600, and 1000 g/mol, and various molar ratios of EG and PEG were tried. Their tensile and shape‐memory properties were compared at various points. The glass‐transition and melting temperatures of PET–PEG copolymers decreased with increasing PEG molecular weight and content. A tensile test showed that the most ideal mechanical properties were obtained when the molar ratio of EG and PEG was set to 80:20 with 200 g/mol of PEG. The shape memory of the copolymer with maleic anhydride (MAH) as a crosslinking agent was also tested in terms of shape retention and shape recovery rate. The amount of MAH added was between 0.5 and 2.5 mol % with respect to DMT, and tensile properties and shape retention and recovery rate generally improved with increasing MAH. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 27–37, 2002     

Grafting of polystyrene and poly(p‐chlorostyrene) from the surface of ramie fiber via RAFT polymerization

Reversible addition‐fragmentation chain transfer (RAFT) radical polymerization was used for controlled grafting of styrene and p‐chlorostyrene from the surface of ramie fiber. The hydroxyl groups in ramie fiber were first converted to thiocarbonylthio groups as the RAFT chain transfer agent then used to mediate the RAFT polymerization of styrene, and p‐chlorostyrene in tetrahydrofuran using azobis (isobutyronitrile) as initiator at 60°C. The grafted copolymers were analyzed by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetry, and contact angle measurements. The results confirmed that grafting occurred on the surface of the ramie fiber, substantially increasing the water contact angle from 75.31° to 147° for polystyrene grafted ramie fiber (cell‐PS) and 135° for poly(p‐chlorostyrene) (cell‐PSCl), and improving the hydrophobicity of the grafted fiber. The homopolymers formed in the polymerization were analyzed by size exclusion chromatography to estimate the molecular weights and polydispersity indices (PDIs) of chains grafted from the surface of the ramie fiber, as well as showed narrow chain length distributions with a PDI of 1.32–1.70. These materials possess potential applications in many advanced technologies. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

阳离子改性苯乙烯-马来酸酐共聚物的制备与表征及应用

以2,3-环氧丙基三甲基氯化铵(ETA)为阳离子化试剂,对苯乙烯-马来酸酐共聚物(SMA)进行阳离子化改性,制备出一种阳离子性高分子分散剂(SMG)。通过红外光谱、含氮量、表面张力以及溶解性等的测定,研究了SMG的结构与性质;通过对颜料黄14的分散性考察,研究了SMG的分散性能。结果表明,SMA在阳离子化过程中,酸酐基团全部开环,部分形成酯键,阳离子化度达到7.5%左右;SMG的表面活性较低,但对颜料黄14的分散稳定性较好,在pH=7.0条件下,可以使颜料的Zeta电位提高至 35.4 mV。     

Thermal properties of poly(maleic anhydride‐alt‐acrylic acid) in the presence of certain metal chlorides

Polychelates were synthesized by the addition of aqueous solutions of copper(II), cadmium(II), and nickel(II) chlorides to aqueous solutions of poly(maleic anhydride‐alt‐acrylic acid) [poly(MA‐alt‐AA)] in different pH media. The thermal properties of poly(MA‐alt‐AA) and its metal complexes were investigated with thermogravimetry and differential scanning calorimetry (DSC) measurements. The polychelates showed higher thermal stability than poly(MA‐alt‐AA). The thermogravimetry of the polymer–metal complexes revealed variations of the thermal stability by complexation with metal ions. The relative thermal stabilities of the systems under investigation were as follows: poly(MA‐alt‐AA)–Cd(II) > poly(MA‐alt‐AA)–Cu(II) > poly(MA‐alt‐AA)–Ni(II) > poly(MA‐alt‐AA). The effects of pH on the complexation and gravimetric analysis of the polychelates were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3926–3930, 2006     

SMA工业生产计量及分析方法

运用密度法建立了可用于苯乙烯－马来酸酐共聚物（SMA）工业生产听密度－温度－浓度关系式。应用表明，此式在工业生产计量仪表的标定中是可信和可靠的。利用工业生产获得了有关工艺参数，还建立了针对SMA生产的反应器方程式。经20d连续工业生产考察表明，用反应器方式式所预测的转化率与实际值非常吻合，该方程式具有指导SMA工业生产的意义。     

Effect of tacticity of poly(methyl methacrylate) on the miscibility with poly(styrene‐co‐acrylonitrile)

Isotactic, atactic, and syndiotactic poly(methyl methacrylates) (PMMAs) (designated as iPMMA, aPMMA, and sPMMA) with approximately the same molecular weight were mixed separately with poly(styrene‐co‐acrylonitrile) (abbreviated as PSAN) containing 25 wt % of acrylonitrile in tetrahydrofuran to make three polymer blend systems. Differential scanning calorimetry (DSC) was used to study the miscibility of these blends. The results showed that the tacticity of PMMA has a definite impact on its miscibility with PSAN. The aPMMA/PSAN and sPMMA/PSAN blends were found to be miscible because all the prepared films were transparent and showed composition dependent glass transition temperatures (T_gs). The glass transition temperatures of the two miscible blends were fitted well by the Fox equation, and no broadening of the glass transition regions was observed. The iPMMA/PSAN blends were found to be immiscible, because most of the cast films were translucent and had two glass transition temperatures. Through the use of a simple binary interaction model, the following comments can be drawn. The isotactic MMA segments seemed to interact differently with styrene and with acrylonitrile segments from atactic or syndiotactic MMA segments. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2894–2899, 1999     

Thermal properties of blends of poly(hydroxybutyrate‐co‐hydroxyvalerate) and poly(styrene‐co‐acrylonitrile)

Thermal properties of blends of poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) and poly(styrene‐co‐acrylonitrile) (SAN) prepared by solution casting were investigated by differential scanning calorimetry. In the study of PHBV‐SAN blends by differential scanning calorimetry, glass transition temperature and melting point of PHBV in the PHBV‐SAN blends were almost unchanged compared with those of the pure PHBV. This result indicates that the blends of PHBV and SAN are immiscible. However, crystallization temperature of the PHBV in the blends decreased approximately 9–15°. From the results of the Avrami analysis of PHBV in the PHBV‐SAN blends, crystallization rate constant of PHBV in the PHBV‐SAN blends decreased compared with that of the pure PHBV. From the above results, it is suggested that the nucleation of PHBV in the blends is suppressed by the addition of SAN. From the measured crystallization half time and degree of supercooling, interfacial free energy for the formation of heterogeneous nuclei of PHBV in the PHBV‐SAN blends was calculated and found to be 2360 (mN/m)³ for the pure PHBV and 2920–3120 (mN/m)³ for the blends. The values of interfacial free energy indicate that heterogeneity of PHBV in the PHBV‐SAN blends is deactivated by the SAN. This result is consistent with the results of crystallization temperature and crystallization rate constant of PHBV in the PHBV‐SAN blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 673–679, 2000     

Synthesis of styrene–maleic anhydride random copolymer and its compatibilization to poly(2,6‐dimethyl‐1,4‐phenylene ether)/brominated epoxy resin

Styrene–maleic anhydride random copolymer (R‐SMA_7.5), with a low content of maleic anhydride (MAH) of about 7.5 mol%, has been prepared, and the copolymer was characterized by fourier‐transform infrared (FTIR) and ¹³C NMR techniques showing that the product contained only random copolymer without blocks. The miscibility between poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE) and R‐SMA, was investigated by differential scanning calorimetry (DSC), showing that PPE was miscible with R‐SMA synthesized in our laboratory over the entire composition with low MAH content. A blend of R‐SMA₁₈ (MAH content is about 18 mol%) and PPE was also studied by DSC, which showed that PPE was immiscible when R‐SMA was the major component, although it was miscible with limited composition. FTIR investigation showed that R‐SMA could react with bromide epoxy (BEP) resin at high temperature (180°). The heat‐resistance and mechanical properties of R‐SMA/PPE/BEP systems were tested and analyzed, and results indicated that R‐SMA could improve the miscibility of PPE and BEP with increasing T_g of the BEP phase and decreasing the T_g of the PPE slightly, improving the breaking elongation and breaking energy, which resulted from good miscibility between PPE and BEP with R‐SMA as the compatibilizer. Finally, the properties of the composites (copper clad laminate) with R‐SMA_7.5 are studied and discussed. Copyright © 2003 Society of Chemical Industry     

Viscoelastic properties of blends of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) having various acrylonitrile contents

Dynamic viscoelastic properties of blends of poly(methyl methacrylate) (PMMA) and poly(styrene‐co‐acrylonitrile) (SAN) with various AN contents were measured to evaluate the influence of SAN composition, consequently χ parameter, upon the melt rheology. PMMA/SAN blends were miscible and exhibited a terminal flow region characterized by Newtonian flow, when the acrylonitrile (AN) content of SAN ranges from 10 to 27 wt %. Whereas, PMMA/SAN blends were immiscible and exhibited a long time relaxation, when the AN content in SAN is less than several wt % or greater than 30 wt %. Correspondingly, melt rheology of the blends was characterized by the plots of storage modulus G′ against loss modulus G″. Log G′ versus log G″ plots exhibited a straight line of slope 2 for the miscible blends, but did not show a straight line for the immiscible blends because of their long time relaxation mechanism. The plateau modulus, determined as the storage modulus G′ in the plateau zone at the frequency where tan δ is at maximum, varied linearly with the AN content of SAN irrespective of blend miscibility. This result indicates that the additivity rule holds well for the entanglement molecular weights in miscible PMMA/SAN blends. However, the entanglement molecular weights in immiscible blends should have “apparent” values, because the above method to determine the plateau modulus is not applicable for the immiscible blends. Effect of χ parameter on the plateau modulus of the miscible blends could not be found. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008