Effects of redox initiator on graft copolymerization of methyl methacrylate onto natural rubber

Effects of cumene hydroperoxide (CHPO)/tetraethylene pentamine (TEPA), tert‐butyl hydroperoxide (TBHPO)/TEPA, and potassium persulfate (K₂S₂O₈)/sodium thiosulfate (Na₂S₂O₃) redox initiator on methyl methacrylate (MMA) grafted natural rubber by emulsion polymerization were investigated. The optimum reaction condition for each redox initiator on the grafting of natural rubber was studied. The grafted poly(methyl methacrylate) (PMMA) stays on the surface of rubber particles. CHPO dissolves very well in the oil phase and TBHPO dissolves moderately in the oil phase, and K₂S₂O₈ /Na₂S₂O₃ initiation is water‐soluble. Each can interact with TEPA in the aqueous phase. CHPO was found to give a higher grafting efficiency. To promote a greater grafting efficiency and yield a lower homopolymer content of PMMA, vinyl neo‐decanoate (VneoD) was added. Percentages of grafting of MMA on natural rubber latex initiated by CHPO/TEPA, TBHPO/TEPA, and K₂S₂O₈/K₂S₂O₃ of 84.4, 74.5, and 61.1, respectively, were in good agreement with percentages of PMMA in the aqueous phase as 7.2, 12.0, and 17.9 by CHPO, TBHPO, and K₂S₂O₈. VneoD produces allylic radicals on polyisoprene chains, favoring the grafting reaction with other vinyl monomers. CHPO/TEPA is thus a better redox system for grafting of MMA monomer on natural rubber latex. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2587–2601, 2006     

用废旧轮胎生产胶粉的新工艺及胶粉利用的新技术

该文简述了废轮胎生产胶粉的方法相对于其他回收方法的优点。报道的生产废胶粉的方法包括深冷工艺、准低温工艺、常温工艺及爆破法。废胶粉的应用包括用于改性沥青、作为铺地材料、制造防盗井、合成高吸水性树脂、生产胶粘剂以及制造油田专用堵剂,并对该技术的发展提出了建议。     

Studies on graft copolymerization of cyclohexyl methacrylate onto chloroprene rubber

Graft copolymerization of cyclohexyl methacrylate (CMA) onto chloroprene rubber (CR) was carried out in toluene using benzoyl peroxide as an initiator. The graft copolymer was isolated from the gross polymer by extracting it with a butanone solution. Infrared (IR) spectra of the graft copolymer showed the occurrence of grafting. Optimization of various parameters of the grafting, namely, time, temperature, and initiator concentrations, was performed. The mechanical adhesive properties of the graft copolymer, CR-g-CMA, were measured and compared with those of the graft copolymer of methyl methacrylate (MMA) onto CR, CR-g-MMA. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1733–1737, 1997     

Surface modification of natural rubber film by UV‐induced graft copolymerization with methyl methacrylate

Methyl methacrylate (MMA) was directly grafted on natural rubber (NR) or sulfur prevulcanized (SP) NR surface. The rubber sheet was primarily treated with argon plasma, followed by exposure to air for generating active functional groups. After immersing in a mixture of 30% hydrogen peroxide and MMA in ethanol and water (1 : 1), the MMA grafting took place after UV‐irradiation for 30–120 min. Results from the contact angle measurement and attenuated total reflection–Fourier transform infrared (ATR‐FTIR) spectroscopy showed that the highest amount of MMA grafting was achieved when using 13 wt % of MMA and UV irradiation time of 60 min. The tensile strength and percentage elongation at break of the modified SPNR sheet, having similar MMA grafting to that of NR, were in acceptable range as indicated in the standard glove's test (ASTM D3577). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2270–2276, 2007     

可接枝型氯丁橡胶与甲基丙烯酸甲酯接枝共聚工艺剖析

从反应系统残留氧的影响,搅拌强度及溶剂３个方面分析了可接枝型氯丁橡胶与甲基丙烯酸甲酯接枝共聚的工艺控制情况,提高了接枝共聚的重现性。     

表面引发原子转移自由基聚合制备甲基丙烯酸甲酯接枝废胶粉及其表征

采用原子转移自由基聚合法研究了废胶粉(GTR)的表面化学接枝改性,包括2-溴异丁酰溴(BIBB)与GTR表面羟基的反应,以及形成的大分子引发剂引发甲基丙烯酸甲酯(MMA)的接枝聚合反应;用红外光谱和X射线光电子能谱仪、热重分析和扫描电子显微镜对接枝改性反应前后的GTR表面进行了表征.结果表明,GTR表面含有一定量羟基,...     

国产氯丁胶和MMA的接枝共聚研究

研究了国产CR - 2 4 4可接枝氯丁胶 (CR)和甲基丙烯酸甲酯 (MMA)的接枝共聚反应 ,并成功地进行了 0 .1m3和 1 .0m3的扩试生产。     

影响废旧轮胎胶粉热-机械剪切脱硫再生效果的因素

利用自行研制的长径比为60/1的强剪切型双螺杆挤出机对废旧轮胎胶粉进行热-机械剪切脱硫,用傅里叶变换红外光谱对脱硫胶粉进行了表征,考察了胶粉粒径和喂料螺杆转速与主机转速之比对脱硫胶粉凝胶含量、交联密度及再生胶力学性能的影响,以及脱硫过程中胶粉相对分子质量及其分布的变化。结果表明,随着胶粉粒径的增大,胶粉所受到的剪切力增强,脱硫效果也越好。随着转速比的增加,胶粉的脱硫程度提高;脱硫过程的第1个阶段是交联网络的破坏,第2个阶段除交联网络的破坏外分子主链也发生降解,再生胶的力学性能先增大后减小;当转速比为1.4时再生胶的扯断伸长率和弹性最好,拉伸强度也相对较高。     

Studies on graft copolymerization of methyl methacrylate onto poly(vinyl chloride)

The grafting of methyl methacrylate on suspension-grade poly(vinyl chloride) in the presence of lauroyl peroxide has been studied. The reaction was carried out in a water suspension of the starting PVC polymer swollen with the monomer. The influence of reaction temperature, T, starting monomer/polymer ratio, M/P, and initiator concentration, I, in the monomer on the grafting efficiency of both polymers present in the system was found to be well described by the following linear regression equations: and      

有氧再生废轮胎橡胶粉的制备与表征

在管式炉中对废轮胎橡胶粉进行了有氧再生,并考察了气氛、再生温度和再生时间对废轮胎橡胶粉有氧再生过程的影响。结果表明,有氧条件下橡胶粉的质量损失和溶胶质量分数均随温度升高而增大,溶胶中合成胶分子链之间易发生二次重组再交联反应,天然橡胶分子链则主要发生断裂。240 ℃下橡胶粉在有氧条件下再生10 min时,溶胶质量分数达55.9%。橡胶主链和交联键断裂主要发生了氧化反应,生成含羰基和亚砜基的化合物,同时伴有水和二氧化碳等生成,说明橡胶粉中的橡胶分子链有效断链。     

Surface structures and adhesion enhancement of poly(tetrafluoroethylene) films after modification by graft copolymerization with glycidyl methacrylate

Surface modifications of Ar plasma-pretreated poly(tetrafluoroethylene) (PTFE) film were carried out via near-UV light-induced graft copolymerization with glycidyl methacrylate (GMA). The structure and chemical composition of the copolymer surface and interface were studied by angle-resolved X-ray photoelectron spectroscopy (XPS). For PTFE substrate with a substantial amount of grafting, the grafted GMA polymer penetrates or becomes partially submerged beneath a thin surface layer of dense substrate chains to form a stratified surface microstructure. The concentration of the surface-grafted GMA polymer increases with the plasma pretreatment time, the near-UV light illumination time, and the monomer concentration. The GMA graft copolymerized PTFE surfaces adhere strongly to one another when brought into direct contact and cured (i) in the presence of a diamine alone or (ii) in the presence of an epoxy adhesive (epoxy resin plus diamine curing agent). In the presence of diamine alone, failure occurs in the interfacial region. For epoxy adhesive-promoted adhesion, the failure mode is cohesive, i.e. it takes place in the bulk of one of the delaminated PTFE films. The lap shear strengths in both cases increase with the amount of surface-grafted epoxide polymer. The development of the adhesion strength depends on the concentration of the surface graft, the microstructure of the graft copolymerized PTFE surface, the interfacial reactions, and the nature of the bonding agent.     

废旧轮胎橡胶颗粒在沥青混合料中的应用

为了探索废旧橡胶轮胎回收再利用的新途径,研究了橡胶颗粒沥青混合料的级配及拌和、成型方法,并通过车辙实验、低温小粱弯曲实验和冻融劈裂实验等分析了橡胶颗粒沥青混合料的高低温性能和抗水损害性能等基本路用性能。论证了将废旧轮胎橡胶颗粒作为骨料应用于筑路用的沥青混合料的可行性。     

Surface graft copolymerization of acrylic acid onto corona-treated poly(ethylene terephthalate) fabric

Acrylic acid (AA) was grafted onto the surface of poly(ethylene terephthalate) (PET) fabric after having short-time corona-discharge treatment (CDT) in an atmosphere in the presence of the initiator. The effect of N,N-dimethylformamide (DMF) pretreatment time, CDT time, graft copolymerization time and temperature, concentration of AA, and the content of initiator on graft yield of PET fabric was discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 1161–1164, 1999     

羧甲基甲壳素接枝甲基丙烯酸甲酯的制备及成膜性

通过高速搅拌,未使用乳化剂,制备了羧甲基甲壳素和甲基丙烯酸甲酯的接枝共聚物,避免了产物中引入乳化剂杂质。利用红外光谱对接枝共聚物进行了表征。考察了不同接枝率的产物在12种常见溶剂中的溶解性,结果表明,不同接枝率的接枝共聚物都有良好的水溶性,可以形成无色透明的膜,扩大了其实际应用价值。     

Factorial experimental design for graft copolymerization of styrene and methyl methacrylate onto styrene–butadiene rubber

The graft copolymerization of styrene (ST) and methyl methacrylate (MMA) onto styrene–butadiene rubber (SBR) latex prepared by seeded emulsion polymerization has been studied under various reaction conditions using cumene hydroperoxide redox initiator. The mechanism of graft copolymerization has been investigated. The synthesized graft copolymers were purified and then characterized by proton nuclear magnetic resonance (¹H NMR) analysis. A 2 2 fractional factorial experimental design was applied to study the effects of the process variables such as the amount of initiator and emulsifier, the presence or absence of chain‐transfer agent, ST to MMA ratio, monomer to rubber ratio, and reaction temperature on the grafting efficiency. The analysis of the results from the design showed the sequence of the main effect on the observed response of the grafting of ST and MMA onto SBR and that the amount of chain‐transfer agent had a significant effect. Transmission electron microscopy was used to study the morphology of the graft copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2867–2874, 2006     

高氯氯化聚乙烯对CR与MMA接枝共聚合的影响

以甲苯为溶剂,在９０℃条件下,研究了１０份氯含量为５７％的高氯氯化聚乙烯（ＨＣＰＥ）对１００份粘接型氯丁橡胶与７５份甲基丙烯酸甲酯（ＭＭＡ）接枝共聚合的影响。结果表明,该体系与无ＨＣＰＥ体系相比,ＭＭＡ转化率约提高４０％,产物接枝效率约高５０％,接枝度约高９０％。产物含有较高相对分子质量的级分,相对分子质量分布较宽,并且有较好的物理机械性能和较高粘接强度。     

Natural rubber‐g‐methyl methacrylate/poly(methyl methacrylate) blends

The grafting of the methyl methacrylate (MMA) monomer onto natural rubber using potassium persulfate as an initiator was carried out by emulsion polymerization. The rubber macroradicals reacted with MMA to form graft copolymers. The morphology of grafted natural rubber (GNR) was determined by transmission electron microscopy and it was confirmed that the graft copolymerization was a surface‐controlled process. The effects of the initiator concentration, reaction temperature, monomer concentration, and reaction time on the monomer conversion and grafting efficiency were investigated. The grafting efficiency of the GNR was determined by a solvent‐extraction technique. The natural rubber‐g‐methyl methacrylate/poly(methyl methacrylate) (NR‐g‐MMA/PMMA) blends were prepared by a melt‐mixing system. The mechanical properties and the fracture behavior of GNR/PMMA blends were evaluated as a function of the graft copolymer composition and the blend ratio. The tensile strength, tear strength, and hardness increased with an increase in PMMA content. The tensile fracture surface examined by scanning electron microscopy disclosed that the graft copolymer acted as an interfacial agent and gave a good adhesion between the two phases of the compatibilized blend. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 428–439, 2001     

Graft copolymerization of acrylonitrile and methyl methacrylate monomer mixtures on crumb natural rubber

Graft copolymerization of mixtures of acrylonitrile and methyl methacylate on crumb natural rubber was carried out in toluene at 60°C. The nitrogen content of the grafted copolymer was determined by elemental analysis and used to estimate the composition of the copolymer samples. It was found that the amount of acrylonitrile monomeric units incorporated into the polymer was disproportionately lower than the acylonitrile content of the feed and explanations in terms of the e‐value of the monomers and the inherent heterogenous nature of the polymerization mixture were offered. The miscibility of the natural rubber‐g‐polyacrylonitrile‐co‐poly(methyl methacrylate) with poly(vinyl chloride) was studied by viscometry, differential scanning calorimetry, and phase contrast microscopy. It was found that the natural rubber‐g‐polyacrylonitrile‐co‐poly(methyl methacrylate) formed semimiscible blends with poly(vinyl chloride). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1872–1877, 2002; DOI 10.1002/app.10474     

Preirradiation‐induced emulsion graft polymerization of glycidyl methacrylate onto poly(vinylidene fluoride) powder

An epoxy‐group‐containing monomer, glycidyl methacrylate (GMA), was grafted onto poly(vinylidene fluoride) powder via preirradiation‐induced emulsion graft polymerization. The existence of graft chains was proven by chemical structure characterization with Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy analysis. The degree of grafting was calculated by means of fluorine content analysis. A kinetic study indicated that, with the emulsion graft polymerization system, the GMA conversion rate was high, exceeding 80%. The variation in the molecular weight of the grafted polymer was measured by gel permeation chromatography, and its crystallinity was investigated with differential scanning calorimetry. The epoxy groups in graft chains were found to be suitable for further chemical modification. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Photo-induced graft copolymerization of methyl methacrylate on poly(vinyl alcohol)

Photo-induced graft copolymerization of methyl methacrylate on poly(vinyl alcohol) (PVA) was examined in aqueous solutions. In unoxidized samples, only a few percent of PVA used took part in the formation of grafts, and the percent grafting was very low. However, if Fe²⁺, Fe³⁺, anthraquinone-2,7-disulfonate, or oxalic acid was used as sensitizer, the percent grafting was somewhat improved. Among them, the effect of Fe³⁺ was most remarkable. Oxidized PVA showed a higher initiating activity and was more susceptible to the sensitizing action of Fe³⁺ than unoxidized PVA. As Fe³⁺ has an ability to accelerate the photo-induced scission reaction of PVA chains for both oxidized and unoxidized PVA, it is thought to be very probable that the copolymer formed in the photo-induced systems has a block polymer-type structure like that in systems initiated by ceric ion or hydrogen peroxide.