Influence of starch on the properties of carbon‐black‐filled styrene–butadiene rubber composites

The influence of starch on the properties of carbon‐black‐filled styrene–butadiene rubber (SBR) composites was investigated. When the starch particles were directly melt‐mixed into rubber, the stress at 300% elongation and abrasion resistance decreased evidently with increasing starch amount from 5 to 20 phr. Scanning electron microscopy observations of the abrasion surface showed that some apparent craters of starch particles were left on the surface of the composite, which strongly suggested that the starch particles were large and that interfacial adhesion between the starch and rubber was relatively weak. To improve the dispersion of the starch in the rubber matrix, starch/SBR master batches were prepared by a latex compounding method. Compared with the direct mixing of the starch particles into rubber, the incorporation of starch/SBR master batches improved the abrasion resistance of the starch/carbon black/SBR composites. With starch/SBR master batches, no holes of starch particles were left on the surface; this suggested that the interfacial strength was improved because of the fine dispersion of starch. Dynamic mechanical thermal analysis showed that the loss factor at both 0 and 60°C increased with increasing amount of starch at a small tensile deformation of 0.1%, whereas at a large tensile strain of 5%, the loss factor at 60°C decreased when the starch amount was varied from 5 to 20 phr. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Rice husk powder–filled polystyrene/styrene butadiene rubber blends

Natural fibers are rich in cellulose and they are a cheap, easily renewable source of fibers with the potential for polymer reinforcement. The presence of large amounts of hydroxyl groups makes natural fibers less attractive for reinforcement of polymeric materials. Composites made from polystyrene (PS)/styrene butadiene rubber (SBR) blend and treated rice husk powder (RHP) were prepared. The RHP was treated by esterification and acetylation. A similar series of composites was also prepared using maleic anhydride–polypropylene (MA–PP) as a coupling agent. The processing behavior, mechanical properties, effect of thermooxidative ageing, and surface morphology of untreated and chemically modified RHP were studied. There was a decrease in tensile strength (except MA–PP composites), elongation at break, and Young's modulus in chemically treated RHP composites. The postreaction process during thermooxidative ageing enhanced the tensile strength and Young's modulus of the esterified and MA–PP composites. Acetylation treatment was effective in reducing the percentage of water absorption in RHP/PS–SBR composites. In general chemically treated RHP/PS–SBR composites and MA–PP showed a better matrix phase and filler distribution. However, the degree of filler–matrix interaction was mainly responsible for the improvement of mechanical properties in the composites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3320–3332, 2004     

Physicomechanical properties of α‐cellulose–filled styrene–butadiene rubber composites

In this research, the influence of adding α‐cellulose powder to styrene–butadiene rubber (SBR) compounds was investigated. Physicomechanical properties of SBR–α‐cellulose composites, including tensile strength, elongation, Young's modulus, tear strength, hardness, abrasion, resilience, and compression set, before and after ageing, were determined and analyzed. Young's modulus, hardness, and compression set increased and elongation and resilience decreased with increasing α‐cellulose loading in the composites, whereas tensile strength, tear strength, and abrasion resistance initially increased at low α‐cellulose concentration (5 phr), after which these properties decreased with increasing α‐cellulose content. Lower loadings of α‐cellulose (5 phr) showed better results than higher loadings, given that tensile strength, tear strength, and abrasion resistance increased at low α‐cellulose concentration. Theoretical prediction of elastic modulus was carried out using rule of mixtures, Hashin, Kerner, and Halpin–Tsai equations. Calculated results show that these equations are not suitable for accurate prediction for the work carried out. However, these models can be used with confidence for the prediction of elastic modulus because experimental results are higher than the calculated values. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2203–2211, 2005     

Effect of titanate coupling agent on the mechanical properties of clay‐filled polybutadiene rubber

Clays belong to an economic class of fillers, which are used extensively in rubbers and plastics. Being nonreinforcing in nature, there are limitations upon its use. If the properties of filler are modified, it will get a higher value as a filler. To achieve this modification of surface properties is one of the avenues. In the present work, the effect of treatment of the coupling agent on clay has been studied, with polybutadiene as a matrix. Composites were made with a varying proportion of untreated and treated clay. A two‐roll mill was used for dispersing the filler in the rubber, and a compression‐molding technique was used to cure the compounded in sheet forms. Tensile properties were measured on a computerized UTM using the ASTM procedure. Comparison of properties of composites filled with treated and untreated clay established that treatment of clay imparts better reinforcing properties. The properties under consideration were tensile strength, modulus at 100 and 400%, Young's modulus, hardness, etc. Tensile strength was improved by 52%, while modulus at 400% was improved by 150%. Similarly Young's modulus also was improved by 27%. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1299–1304, 2004     

Effect of strain on the properties of a styrene–butadiene rubber filled with multiwall carbon nanotubes

Multiwall carbon nanotubes were dispersed in a styrene–butadiene copolymer. The effect of nanotube concentration on the tensile characteristics of the composites was examined. Electrical properties carried out under uniaxial extension show an increase in resistivity upon gradual stretching. A second stretch performed after total release of the stress was shown to lead to a flat response in resistivity. Atomic force microscopy was used to examine orientational effects and changes in filler structure occurring upon application of an uniaxial deformation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Impact of blend ratio on the properties of graphene oxide‐filled carboxylated acrylonitrile–butadiene rubber/styrene–butadiene rubber blends

Carboxylated acrylonitrile–butadiene rubber (XNBR) and styrene–butadiene rubber (SBR) composites with 3 phr (parts per hundred rubber) graphene oxide (GO) were prepared using a latex mixing method. Effects of XNBR/SBR blend ratios on the mechanical properties, thermal conductivity, solvent resistance and thermal stability of the XNBR/SBR/GO nanocomposites were studied. The tensile strength, tear strength, thermal conductivity and solvent resistance of the XNBR/SBR/GO (75/25/3) nanocomposite were significantly increased by 86, 96, 12 and 21%, respectively, compared to those of the XNBR/SBR (75/25) blend. The thermal stability of the nanocomposite was significantly enhanced; in other words, the temperature for 5% weight loss and the temperature of the maximal rate of degradation process were increased by 26.01 and 14.97 °C, respectively. Theoretical analysis and dynamic mechanical analysis showed that the GO tended to locate in the XNBR phase, which led to better properties of the XNBR/SBR/GO (75/25/3) nanocomposite. © 2017 Society of Chemical Industry     

Effect of coupling agent on the mechanical properties of fly ash–filled polybutadiene rubber

Fly ash, a waste productof thermal power stations generated in huge quantities, has been posing problems of its disposal. As such it contains a variety of inorganic oxides and is available in finely powdered form. Attempts have been made for its use as a filler in elastomers and plastics. It is important to note that fly ash used in in untreated form does not significantly enhance the mechanical properties of composites. In this work, fly ash treated with silane coupling agent (Si‐69) was used as a filler in polybutadiene rubber (PBR). The comparison of properties of composites filled with treated and untreated fly ash revealed that the composites with treated fly ash showed better reinforcing properties. Thus the silane coupling agent used here promoted adhesion between fly ash and the PBR. The improvement in mechanical properties in general and tensile properties (tensile strength, modulus 100% and modulus 200%, hardness) of the composites in particular were observed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1322–1328, 2004     

Structural morphology and properties of star styrene–isoprene–butadiene rubber and natural rubber/star styrene–butadiene rubber blends

Star styrene–isoprene–butadiene rubber (SIBR) was synthesized with a new kind of star anionic initiator made from naphthalene lithium and an SnCl₄ coupled agent. The relationship between the structure and properties of star SIBR was studied. Star block styrene–isoprene–butadiene rubber (SB‐SIBR), having low hysteresis, high road‐hugging, and excellent mechanical properties, was closer to meeting the overall performance requirements of ideal tire‐tread rubber according to a comparison of the morphology and various properties of SB‐SIBR with those of star random SIBR and natural rubber/star styrene–butadiene rubber blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 336–341, 2004     

Effects of palm ash loading and maleated natural rubber as a coupling agent on the properties of palm‐ash‐filled natural rubber composites

Natural rubber composites were prepared by the incorporation of palm ash at different loadings into a natural rubber matrix with a laboratory‐size two‐roll mill (160 × 320 mm²) maintained at 70 ± 5°C in accordance with the method described by ASTM D 3184–89. A coupling agent, maleated natural rubber (MANR), was used to improve the mechanical properties of the natural rubber composites. The results indicated that the scorch time and cure time decreased with increasing filler loading, whereas the maximum torque exhibited an increasing trend. Increasing the palm ash loading increased the tensile modulus, but the tensile strength, fatigue life, and elongation at break decreased. The rubber–filler interactions of the composites decreased with increasing filler loading. Scanning electron microscopy of the tensile fracture surfaces of the composites and rubber–filler interaction studies showed that the presence of MANR enhanced the interfacial interaction of the palm ash filler and natural rubber matrix. The presence of MANR also enhanced the tensile properties and fatigue life of palm‐ash‐filled natural rubber composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on the effect of titanate coupling agent (2.0%) on the mechanical properties of flyash‐filled polybutadiene rubber

Flyash, a waste product of thermal power stations, generated in huge quantities, has been posing problems of disposal. Attempts have been made for its utilization as a filler in elastomers and plastics; however, it has been established that untreated flyash does not at all contribute in enhancing mechanical properties of composites. The purpose of this work was to make meaningful utilization of flyash as a filler, by treating it with a titanate coupling agent and to use it as a filler in PBR. The properties under consideration were tensile strength, modulus at 100 and 400%, Young's modulus, hardness, etc. Composites were made with varying proportion of untreated and treated flyash. A two‐roll mill was used for dispersing the filler in the rubber, and a compression‐molding technique was used to cure the compound in sheet form. Tensile properties were measured on a computerized UTM using an ASTM procedure. Comparison of properties of composites filled with treated and untreated flyash established that treatment of flyash imparts better reinforcing properties. Tensile strength was improved by 50%, while modulus at 400% was improved by 400%. Similarly, Young's modulus also was improved by 209%. The Titanate‐coupling agent used here has promoted adhesion between flyash and the PBR. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1293–1298, 2004     

Processing optimization of latex‐compounded montmorillonite/styrene‐butadiene rubber–polybutadiene rubber

Organo‐montmorillonite was incorporated into model tire tread formulations through latex compounding methods, to evaluate its effects on elastomer reinforcement and dynamic properties. An intercalation structure was obtained by applying latex compounding method to prepare organoclay‐emulsion stryene butadiene (E‐SBR) masterbatches, for compounding with organoclay loading levels of 0–20 parts per hundred rubber (phr). Microstructure, curing properties and tire performance of the compounded rubber were investigated with the aid of X‐ray diffraction, rheometor and dynamic‐mechanical analysis, respectively. The results showed that organo‐montmorillonite filler provided effective reinforcement in the elastomer matrix, as indicated through mechanical and dynamic mechanical properties. Tread compounds using higher organoclay loadings displayed preferred ice traction, wet traction, and dry handling, but decreased winter traction and rolling resistance. Model compounds using 15 phr of organoclay loading levels were preferred for balanced physical and dynamic properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41521.     

Effect of bamboo charcoal powder on the curing characteristics,mechanical properties,and thermal properties of styrene–butadiene rubber with bamboo charcoal powder

Compounds of styrene–butadiene rubber (SBR) filled with bamboo charcoal powders (BCPs) were prepared with a laboratory‐sized two‐roll mill. The effects of the BCP loading on the curing characteristics and mechanical and thermal properties were investigated. The results indicate that the addition of BCP resulted in a longer curing time and a higher Mooney viscosity in the SBR materials. The incorporation of BCP into SBR improved the mechanical properties and dynamic properties. Furthermore, the mechanical properties of the vulcanizates after thermal aging were also studied, and the experimental results indicate that most of the mechanical properties improved after thermal aging. The overall results indicate that BCP could be used as a cheaper filler for SBR materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4534–4541, 2013     

Improvement of properties of silica‐filled styrene–butadiene rubber compounds using acrylonitrile–butadiene rubber

Since silica has strong filler–filler interactions and adsorbs polar materials, a silica‐filled rubber compound has a poor dispersion of the filler and poor cure characteristics. Improvement of the properties of silica‐filled styrene–butadiene rubber (SBR) compounds was studied using acrylonitrile–butadiene rubber (NBR). Viscosities and bound rubber contents of the compounds became lower by adding NBR to the compound. Cure characteristics of the compounds were improved by adding NBR. Physical properties such as modulus, tensile strength, heat buildup, abrasion, and crack resistance were also improved by adding NBR. Both wet traction and rolling resistance of the vulcanizates containing NBR were better than were those of the vulcanizate without NBR. The NBR effects in the silica‐filled SBR compounds were compared with the carbon black‐filled compounds. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1127–1133, 2001     

Effect of an epoxy‐based bonding agent on the cure characteristics and mechanical properties of short‐nylon‐fiber‐reinforced acrylonitrile–butadiene rubber composites

The cure characteristics and mechanical properties of short‐nylon‐fiber‐reinforced acrylonitrile–butadiene rubber composites with and without an epoxy resin as a bonding agent were studied. The epoxy resin was a good interfacial‐bonding agent for this composite system. The minimum torque showed a marginal increase with the resin concentration. The maximum–minimum torque showed only a marginal change with the resin. The scorch time decreased with the fiber concentration and resin content. The tensile strength and abrasion resistance were improved and the tear resistance and resilience were reduced with the resin concentration. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 532–539, 2006     

Thermal and scanning electron microscopy/energy‐dispersive spectroscopy analysis of styrene–butadiene rubber–butadiene rubber/silicon dioxide and styrene–butadiene rubber–butadiene rubber/carbon black–silicon dioxide composites

Silica as a reinforcement filler for automotive tires is used to reduce the friction between precured treads and roads. This results in lower fuel consumption and reduced emissions of pollutant gases. In this work, the existing physical interactions between the filler and elastomer were analyzed through the extraction of the sol phase of styrene–butadiene rubber (SBR)–butadiene rubber (BR)/SiO₂ composites. The extraction of the sol phase from samples filled with carbon black was also studied. The activation energy (E_a) was calculated from differential thermogravimetry curves obtained during pyrolysis analysis. For the SBR–BR blend, E_a was 315 kJ/mol. The values obtained for the composites containing 20 and 30 parts of silica per hundred parts of rubber were 231 and 197 kJ/mol, respectively. These results indicated an increasing filler–filler interaction, instead of filler–polymer interactions, with respect to the more charged composite. A microscopic analysis with energy‐dispersive spectroscopy showed silica agglomerates and matched the decreasing E_a values for the SBR–BR/30SiO₂ composite well. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2273–2279, 2005     

Mechanical properties and morphologies of polypropylene composites synergistically filled by styrene‐butadiene rubber and silica nanoparticles

The mechanical properties and morphologies of PP/SBR/SiO₂ nanocomposites have been studied using mechanical testing, wide‐angle X‐ray diffraction (WAXD), polarizing optical microscopy (POM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The mechanical properties of neat polypropylene can be considerably improved by synergistically filling with SiO₂ and SBR nanoparticles, especially for the notched Izod impact strength. The results from the WAXD, POM, SEM, DSC, and TGA measurements reveal that: (i) the β‐phase crystal structure of PP is formed when SiO₂ and SBR nanoparticles are synergistically filled with polypropylene and its formation plays a role for the enhancement of the impact strength for PP/SBR/SiO₂ nanocomposites; (ii) the dispersion of SiO₂ and SBR nanoparticles in PP/SBR/SiO₂ composites is homogeneous, indicating that synergistic incorporating method decreases the aggregation of nanoparticles and thus increases the sites for dissipation of shock for impact energy in PP/SBR/SiO₂ nanocomposites; (iii) the thermal analysis shows high thermal stability for the PP/SBR/SiO₂ nanocomposites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and properties of styrene‐butadiene rubber nanocomposites blended with carbon black‐graphene hybrid filler

Graphene has become an attractive reinforcing filler for rubber materials, but its dispersion in rubber is still a big challenge. In this work, a novel carbon black‐reduced graphene (CB‐RG) hybrid filler was fabricated and blended with styrene‐butadiene rubber (SBR) via simple two‐roll mill mixing. The prepared CB‐RG hybrids had a microstructure with small CB agglomerates adsorbed onto graphene surfaces. CB acted as a barrier preventing the RG sheets from restacking even after drying. Homogeneous dispersion of graphene sheets in SBR matrix was observed by the mechanical mixing method based on the application of the CB‐RG hybrid fillers. Dynamic mechanical analysis showed that Tg of the SBR/CB‐RG blend was higher than that of the SBR/CB blend indicating strong interfacial interactions between RG and SBR due to the high surface area of graphene and the π‐π interaction between SBR and graphene. The tensile properties of SBR/CB‐RG composites improved significantly and the volume resistivity decreased compared with the SBR/CB blends. The thermal stability of SBR composites filled with CB and CB‐RG showed slight difference. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41309.     

Dynamic mechanical properties of styrene‐butadiene rubber vulcanizate filled with electron beam modified surface‐treated dual‐phase filler

The influence of the electron beam modification of a dual‐phase filler on the dynamic mechanical properties of styrene‐butadiene rubber (SBR) is investigated in the presence and absence of trimethylol propane triacrylate or triethoxysilylpropyltetrasulfide. Electron beam modification of the filler results in reduction of the tan δ at 70°C, a parameter for rolling resistance, and an increase in the tan δ at 0°C, a parameter for wet skid resistance of SBR vulcanizates. These modified fillers give significantly better overall performance in comparison with the control dual‐phase filler. This variation in properties is explained in terms of filler parameters such as the filler structure that leads to rubber occlusion and filler networking. These results are further corroborated using the master curves obtained by the time–temperature superposition principle. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2992–3004, 2003     

Effect of silane coupling agent on the fatigue crack propagation of silica‐filled natural rubber

Based on the real‐time crack tip morphology monitoring, the influence of silane coupling agent (SCA) on the crack‐growth behavior of silica‐filled natural rubber (NR) was analyzed. By using SCA, silica particles can be well dispersed and a filler–matrix network can be formed, which leads to lower crack‐growth rate. Results indicate that a dosage of 5 wt % (with respect to silica loading) is the optimal content. The real‐time observation and scanning electron microscopy (SEM) analysis proved that thin ligaments and dimples with homogeneous distribution appear on the crack tip. These crack tip morphologies reflect the low crack‐growth rate. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41980.     

Nonlinear stress relaxation of silica filled solution‐polymerized styrene–butadiene rubber compounds

The stress relaxation of silica (SiO₂) filled solution‐polymerized styrene–butadiene rubber (SSBR) has been investigated at shear strains located in the nonlinear viscoelastic regions. When the characteristic separability times are exceeded, the nonlinear shear relaxation modulus can be factorized into separate strain‐ and time‐dependent functions. Moreover, the shear strain dependence of the damping function becomes strong with an increase in the SiO₂ volume fraction. On the other hand, a strain amplification factor related to nondeformable SiO₂ particles can be applied to account for the local strain of the rubbery matrix. Furthermore, it is believed that the damping function is a function of the localized deformation of the rubbery matrix independent of the SiO₂ content. The fact that the time–strain separability holds for both the unfilled SSBR and the filled compound indicates that the nonlinear relaxation is dominated by the rubbery matrix, and this implies that the presence of the particles can hardly qualitatively modify the dynamics of the polymer. It is thought that the filler–rubber interaction induces a coexistence of the filler network with the entanglement network of the rubbery phase, both being responsible for the nonlinear relaxation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009