共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
1996年4月24~25日来自全国化工、石化、轻工、医药、纺织、机电、中国科学院、大专院校的122个单位150名专家和企业家参加了会议。会议交流了学术报告37篇,总结了近年来我国生物化工、橡塑助剂、农药、染料和医药中间体科研和生产取得的成绩:研讨了国内外发展趋势和市场的需求;找出了差距和存在的问题;明确了“九五”的发展方向,提出了对策和建议。发布了有关研究开发的成果、可供转让的新技术、新工艺和新产品的信息。 相似文献
3.
4.
5.
《化学工业与工程技术》2019,(1):17-23
介绍了丁二烯装置溶剂精制工艺流程,分析了溶剂精制系统中产生的焦油、丁二烯二聚物及废水三大污染源及其危害。制定并实施了工艺改进措施,经过改进排焦工艺、丁二烯二聚物脱除工艺、溶剂精制系统脱水工艺,实现了排焦作业密闭操作、减少了作业过程带来的现场异味污染、消除了焦油池内人工开挖焦油带来的高风险作业、减少了装置废渣生成量、COD排放总量得到了控制,达到了净化溶剂品质、规避环保风险、节约资源、环境友好的生产目标,提高了装置运行质量,同时丁二烯二聚物污染源转化为副产品销售,增加了装置的经济效益。 相似文献
6.
《新世纪水泥导报》2015,(6)
针对预分解窑水泥熟料煅烧过程特性,通过采用神经网络算法,研究生产过程采集的实时数据,经数据分析、处理,建立适合水泥熟料煅烧过程的控制模型,采用多变量、非线性模型预测控制技术,建立了质量控制器、产量控制器、生料喂料控制器、风量优化控制器、分解炉控制器、回转窑控制器、篦冷机控制器、虚拟在线分析仪VOA等,实现了水泥熟料煅烧过程的闭环优化控制。在常山南方水泥的应用证明,熟料煅烧过程优化控制器的应用稳定了分解炉、回转窑、篦冷机的运行工况,增加了熟料产量,降低了燃料消耗,延长了回转窑耐火材料寿命,提高了熟料产品质量,统一了中控操作,消除了班次的操作差异,减轻了操作员劳动强度,取得了较好的效益。 相似文献
7.
王大全 《精细与专用化学品》1996,(12)
1996年4月24~25日,在浙江省湖州市召开了全国生物化工、橡塑助剂、农药、染料和医药中间体的学术交流会。来自全国化工、石化、轻工、医药、纺织、机电、中国科学院以及大专院校的122个单位150名代表参加了会议。 会议交流了生物化工、橡塑助剂、农药、染料和医药中间体的学术报告37篇,总结了近年来我国科研和生产取得的成绩,研讨了国内外发展趋势和市场需求,找出了差距和存在的问题,明 相似文献
8.
9.
邻甲苯酚的开发与市场前景 总被引:1,自引:0,他引:1
介绍了邻甲苯酚的性质、生产方法、概述了它在农药、香料、医药、染料、合成树指、抗氧剂等方面的应用,分析了国内外的生产现状,评价了苯酚烷基化法的技术经济情况。 相似文献
10.
11.
《国际聚合物材料杂志》2012,61(5):393-401
The kinetics of the reactive blending process occurring during the stirred melting of polyamide 6/polycarbonate (PA6/PC), polyamide 6/polycarbonate/poly(propylene oxide) (PA6/PC/PPO) in a Haake internal mixer at 240°C were investigated. In the PA6/PC blends the formation of copolymers can be observed and they act as compatibilizing agents, raising the miscibility of these blends. In the PA6/PC/PPO blends, the composition is very important in creating the PA6-PC copolymers. The rise of the PPO percentage increases the mobility of the PA6 molecules and the probability of formation of PA6-PC copolymers in PA6/PC/PPO blends with 10% w/w of PC. The PPO percentage (3-10 phr) influences the kinetics of reaction of PA6/PC/PPO ternary blends with a constant PA6/PC mass ratio (85/15). 相似文献
12.
通过马来酸酐接枝苯乙烯-丁二烯嵌段共聚物(SEBS-MAH)对聚苯醚/尼龙6(PPO/PA6)合金进行增容增韧改性,制备芳纶纤维(AF)增强PPO/PA6/SEBS-MAH复合材料。实验结果表明:SEBS-MAH能够提高PPO/PA6共混体系的相容性,并且能够提高其力学性能,添加10份SEBS-MAH比不添加SEBS-MAH共混体系的拉伸、弯曲和冲击强度各增加了19.1%、49.3%和46.8%,共混物的玻璃化转变温度得到提高;AF能够提高PPO/PA6/SEBS-MAH共混体系的力学性能以及摩擦性能,并使共混体系的刚性得到提高,添加7.5份AF的复合材料的拉伸、弯曲和冲击强度分别比未添加AF时提高了22.1%、13.1%和12.9%,摩擦系数降低了0.18。 相似文献
13.
14.
A series of composites of PPO/PA 6 with improved toughness were synthesized by using ε‐caprolactam as a reactive solvent. Inserting minor PPO macromolecules (1–3 wt %) into PA 6 matrix obviously reduced the crystallinity of PA6. Two crystallization temperatures were found when 6 wt % PPO was added. SEM revealed that the phase morphology of the composites could be manipulated by varying the content of PPO in PA 6. As a consequence, the impact strength and the elongation of PPO/PA6 were improved with maintenance of tensile strength when quite small content of PPO (1–3 wt %) was incorporated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006 相似文献
15.
Poly(phenylene oxide) (PPO)/polyamide 6 (PA6) (50/50 w/w) blend nanocomposites were prepared by melt mixing of PPO, PA6, and organically modified clay. The morphology of PPO/PA6 nanocomposite with various amounts of clay has been investigated using scanning electron microscope (SEM), transmission electron microscope (TEM), and wide-angle X-ray diffraction (WAXD). For the PPO/PA6 blend without clay, PPO is dispersed in the PA6 matrix with an average particle diameter of about 4.2 μm. The domain size of the dispersed PPO phase is significantly decreased to about 1.1 μm by adding a small amount of clay (2%). However, when the amount of organoclay is more than 5%, the matrix-domain structure is found to transform into the co-continuous morphology. The TEM observation shows that all the organoclay is dispersed only in the PA6 phase with a high degree of exfoliation and there is no any clay detectable in the PPO phase for the nanocomposites regardless of the amount of clay. It is considered that the dispersed clay platelets play an important role in the control of the PPO/PA6 blend morphology. Firstly, the selective localization of clay in PA6 phase changes the viscosity ratio of the PPO and PA6 phases. Therefore, clay has significant effects on the morphology of the polymer blend. Secondly, the high aspect ratio of the clay platelets prevents the coalescence of domains during melt mixing. 相似文献
16.
研究了聚苯醚/尼龙6/聚苯醚接枝马来酸酐/功能化碳纳米管(PPO/PA6/PPO-g-MAH/CNTs-x)复合材料的形貌结构、力学性能、动态力学行为、流变性能。引入增容剂PPO-g-MAH可改善PPO与PA6之间的界面性能,明显提高了PPO/PA6共混物的力学性能。通过拉伸、冲击实验,动态力学和流变学实验分析发现,在PPO/PA6/PPO-g-MAH共混物中添加氨基化碳纳米管(CNTs-NH2),其形貌和力学性能均优于碳纳米管(CNTs)和羧基化碳纳米管(CNTs-COOH)。这是由于CNTs-NH2与PA6/PPO-g-MAH的相互作用较强,并随着CNTs-NH2添加量的增加,复合材料的拉伸性能、储能模量和复数黏度提高,但冲击强度降低。 相似文献
17.
聚苯醚/聚酰胺合金的研究 总被引:6,自引:0,他引:6
借助扫描电子显微镜和差示扫描量热仪以及动态粘弹谱仪等仪器,研究了聚苯醚/聚酰胺合金的工艺、结构和性能的关系。实验表明,同一种聚苯醚/聚酰胺合金因其加工工艺条件不同,其结构形态不同;韧性相差较大的同类材料,其结构形态也不同,但其DSC曲线与动态粘弹谱曲线却无明显区别。 相似文献
18.
以尼龙6(PA6)为基体树脂,添加聚苯醚(PPO)制备PA6/PPO共混合金,同时添加乙烯-丙烯酸甲酯-甲基丙烯酸缩水甘油酯三元共聚物(8900)、乙烯-丙烯酸甲酯共聚物(1125)、马来酸酐接枝聚苯醚(PPO-g-MAH)等相容剂对PA6/PPO合金进行增容改性。探讨了聚苯醚和相容剂对合金力学性能、耐热性能、加工性能和吸水性能的影响,同时利用荧光光谱技术考察了体系的相容性。实验结果表明,添加5wt%聚苯醚和5wt%相容剂8900时,所制得的合金具有较优异的综合性能。 相似文献
19.
20.
PPO与PA,PP是不相容的,制造PPO PA及PPO PP合金需要提高合金中两组分的相容性。本文叙述改善相容性的原理和途径、两种合金的特点及其重要性能。 相似文献