共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
载药壳聚糖缓释微球的制备及其释放研究 总被引:1,自引:0,他引:1
实验采用乳化交联法,使用复合交联剂(先用甲醛交联,再用戊二醛交联),制得盐酸四环素壳聚糖缓释微球,并考察不同分子量的壳聚糖、原料质量比、交联剂用量、复合交联剂用量、搅拌速度对微球的影响,筛选出最佳条件制备出戢药微球,并研究了该微球在扫描电镜和倒置式研究型显微镜下的形态及其在pH=7.4,温度为37℃时的释放规律.结果表明,采用复合交联剂的乳化交联法所制得的微球球形好,粒径分布为5~50μm之间,载药量为26.9%,包封率为56.3%,并且具有良好的缓释效果. 相似文献
4.
5.
利用双重乳液法制备蜂窝状聚砜空心微球 总被引:1,自引:0,他引:1
通过W/O/W型双重乳液法制备蜂窝状聚砜(PSF)空心微球。研究了油相表面活性剂的类型、油水比及准备温度的影响。结果表明,油相表面活性剂的类型是决定PSF微球形貌的主要因素;第二次乳化的油水比影响微球的形成;准备温度能有效地控制微球表面孔的多少。 相似文献
6.
7.
8.
采用分散聚合法,在Fe3O4磁流体存在下,通过PVA分子单体共聚制备磁性高分子微球。用透射电镜和X射线对磁流体的形貌、粒径进行表征和衍射分析,同时借助于显微拍照和红外光谱,对磁性微球的微观形貌和化学成分进行了研究。通过对比磁性微球的磁响应性及粒径,研究了反应温度、搅拌速度、聚乙烯醇用量、盐酸用量等操作因素对磁性微球性质的影响。结果表明,在70℃操作温度、750r/min的搅拌速度,5ml9%PVA和0.5ml37%盐酸条件下能制备出粒径在8~44μm之间、具有良好磁响应性、表面富含羟基和羧基等官能团的磁性聚乙烯醇微球。 相似文献
9.
10.
采用乳化交联法,以含有表面活性剂的植物油为连续相(油相),聚乙烯醇(PVA)水溶液为分散相(水相),戊二醛为交联剂,盐酸为催化剂,制备了PVA微球.利用FT-IR、SEM及粒度分析仪等设备对微球的组成、形貌及粒径分布进行了测试,并考察了几种关键工艺参数对微球制备的影响.结果表明,在PVA溶液浓度为5%,表面活性剂采用2 g脱水山梨醇单油酸酯(Span 80),乳化温度为50℃,1mol/L稀盐酸催化戊二醛交联的条件下,可以获得球形规整、表面光滑且分散性好的PVA微球.粒径分析结果显示,所得PVA微球的平均粒径约为25 μm,且分布在15~45 μm范围内的微球约占其总量的80%. 相似文献
11.
《International journal for numerical methods in engineering》2018,113(9):1488-1506
In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method. 相似文献
12.
Standards are the basis for production enterprises to organize production ex-factory inspection trade 《中国标准化(英文版)》2008,25(1):24-25
Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.…… 相似文献
13.
14.
Steffen Müller-Probandt 《材料科学与工程:中英文B版...》2018,(4):161-177
We associate a variety of innovations with the term "Industry 4.0". The pioneer of many 4.0 modifications forms the basisfor the trend towards the integrated di... 相似文献
15.
A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa. 相似文献
16.
On November 30, 2007, the China Association for Standardization (CAS) held a press conference at Beijing Diaoyutai State Guest House. Leaders from the China Household Electric Appliance Research Institute, the China Household Electric Appliance Association, and the China Consumers' Association attended and made speeches.…… 相似文献
17.
Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß. 相似文献
18.
Janet Lang 《Materials and Manufacturing Processes》2017,32(7-8):857-866
ABSTRACTThe production of ferrous metal increased during the Roman Late Republican period, Principate and Empire. The direct bloomery process was used to extract the metal from its ores using slag-tapping and slag-pit furnaces. The fuel was charcoal and an air blast was introduced by bellows-operated tuyères. Iron formed as a bloom, often as a spongy mass of metal, which contained impurities from the smelting process, including unreacted ore, fuel, slag and fragments from the furnace walls, while the metal was often inhomogeneous with varied carbon contents. Blooms were either smithed directly into bars or ingots or they were broken up, which also allowed the removal of gross impurities and a selection of pieces with similar properties to be made. These could then be forge-welded together and formed into characteristically shaped ingots. Making steel in the furnace seems to have been achieved: it depended on the ore and the furnace and conditions within it. Surface carburization was also carried out. Iron and steel were used extensively in construction and for tools and weapons. Fire welding was often used to add pieces of steel to make the edges of tools and weapons, which could be heat-treated by quenching to harden them. 相似文献
19.
C. Qihong W. Zhan‐Wen J. Yi J. Yehua L. Fei F. Hanguang 《Materialwissenschaft und Werkstofftechnik》2014,45(7):582-590
In the present study a high‐boron high speed steel (HSS) roll material was designed. Many expensive alloy elements have been substituted by cheap boron alloy, and high‐boron high speed steel roll has been manufactured by centrifugal casting method. The microstructures, mechanical properties and wear resistance of centrifugal casting high‐boron high speed steel roll have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), and X‐ray diffraction (XRD) analysis, hardness test, impact test and wear test. The results indicated that the solidification microstructures of high‐boron high speed steel roll consisted of M2(B,C), (W,Mo)2(B,C), M3(B,C), M23(B,C)6 type borocarbides and martensite, a small amount of retained austenite. Borocarbides were continuously distributed over the grain boundary. After quenching from 1050 °C, local broken network appeared in partial borocarbides, and fine secondary borocarbide precipitated from the matrix. After tempering from 525 °C, the amount of precipitated borocarbide increased significantly. After heat treatment, the hardness of high‐boron high speed steel roll excelled 60 HRC, and its impact toughness excelled 8.0 J/cm2. The single groove steel rolling amount of high‐boron high speed steel rolls increases by 500% than that of bainite cast iron roll, when the rolls are used in K1 mill housing of bar mill. 相似文献
20.
Dimiter Hadjistamov 《材料科学与工程:中英文B版...》2019,(2):56-65
The definition of the thixotropy is a decrease in viscosity with time in shear and a subsequent recovery of viscosity after the shear deformation is removed.We ... 相似文献