共查询到20条相似文献,搜索用时 15 毫秒
1.
T. Gómez-del Río P. Poza J. Rodríguez M.C. García-Gutiérrez J.J. Hernández T.A. Ezquerra 《Composites Science and Technology》2010
Poly(ethylene terephthalate) (PET) is one of the most extensively used thermoplastic polyesters out on the market, and it has been implemented in many forms. There has been limited work in the area of PET reinforced with single-walled carbon nanotubes (SWCNT) in mechanical properties. Nanocomposites based on PET with small contents of SWCNT were prepared by in situ polymerization. Elastic constants were determined by tensile tests performed on specimens instrumented with strain gauges. Assuming random orientation distribution of nanotubes, experimental Young’s modulus and Poisson’s ratio values were compared to some micromechanical models (Cox and Krenchel, Halpin–Tsai and Mori–Tanaka) which take into account orientation and aspect ratio of the nanotubes. However, the waviness of the nanotubes is a factor that influences the reinforcing efficiency. 相似文献
2.
Zhiqi Shen Stuart BatemanDong Yang Wu Patrick McMahonMel Dell’Olio Januar Gotama 《Composites Science and Technology》2009
This paper presents a preliminary investigation on the effects of incorporating carbon nanotubes (CNT) into polyamide-6 (PA6) on mechanical, thermal properties and fire performance of woven glass reinforced CNT/PA6 nanocomposite laminates. The samples were characterized by tensile and flexural tests, thermal gravimetric analysis (TGA), heat distortion temperature (HDT) measurements, thermal conductivity and cone calorimeter tests. Incorporation of up to 2 wt% CNT in CNT/PA6/GF laminates improved the flexural stress of the laminates up to 36%, the thermal conductivity by approximately 42% and the ignition time and peak HRR time was delayed by approximately 31% and 118%, respectively. 相似文献
3.
Jan Sumfleth Kirsten PrehnMalte H.G. Wichmann Sebastian WedekindKarl Schulte 《Composites Science and Technology》2010
In this study, three different types of multi-wall carbon nanotubes (MWCNTs) were compared as nanostructured reinforcements in epoxy polymers: commercially available CVD-MWCNTs, synthesised in an industrial process, aligned-CVD-MWCNTs and arc-grown MWCNTs, both obtained from a lab-scale processes. The nanocomposite properties were characterised by means of electron microscopy, rheological, electrical and mechanical methods. Industrial CVD-MWCNTs are favourable for the implication of an electrical conductivity in the epoxy due to their high tendency to form conducting networks. The less entangled structure of aligned-CVD-MWCNTs turns out to be favourable for an easy dispersion and low viscosity in epoxy at similar conductivities compared to the CVD-MWCNTs. Additionally, they provide the highest increase in fracture toughness (∼17%). Arc-grown MWCNTs do not offer any electrical conductivity in epoxy without sufficient purification methods. Their high level of impurities and short length further complicate the transfer of their good electrical and mechanical properties into the nanocomposite. 相似文献
4.
E. Logakis Ch. PandisP. Pissis J. PionteckP. Pötschke 《Composites Science and Technology》2011,71(6):854-862
Nanocomposites of poly(methyl methacrylate) (PMMA) containing various multi-walled carbon nanotubes (MWCNT) contents were prepared using melt mixing. Several techniques were employed to study the influence of the MWCNT addition on the thermal, mechanical, electrical and dielectric properties of the PMMA matrix. The electrical percolation threshold (pc) was found to be 0.5 vol.% by performing AC and DC conductivity measurements. Significantly high conductivity levels (σdc) were achieved: σdc exceeds 10−2 S/cm already at 1.1 vol.%, the criterion for EMI shielding (σdc > 10−1 S/cm) is fulfilled at 2.9 vol.%, and the highest loaded sample (5.2 vol.%) gave a maximum value of 0.5 S/cm. Dielectric relaxation spectroscopy measurements in broad frequency (10−1−106 Hz) and temperature ranges (−150 to 170 °C) indicated weak polymer-filler interactions, in consistency with differential scanning calorimetry and dynamic-mechanical analysis findings. Weak polymer-filler interactions and absence of crystallinity facilitate the achievement of high conductivity levels in the nanocomposites. 相似文献
5.
In the paper, a novel kind of imidazolium based poly(urethane-ionic liquid)/multi-walled carbon nanotubes (PUIL/MWCNT) composites was facilely prepared by uncovalent ways. The imidazolium based ionic liquid (IL) greatly improved the dispersion of pristine MWCNTs in PUIL by the π-cation interaction formed between the imidazolium cation and the π-electron of MWCNTs. The PUIL/MWCNT composites showed obviously increased modulus, glass transition temperature and tensile strength in comparison with PU/MWCNT composites. The thermal and mechanical properties of the PUIL/MWCNT composites presented significant increase with low load of the MWCNTs. It indicated the interactions between PUIL and MWCNTs played an important role to enhance the performances of the composites. 相似文献
6.
A series of composites based on polylactide (PLA), have been prepared by melt-blending with multiwalled carbon nanotubes (MWNT) and Tri(1-hydroxyethyl-3-methylimidazolium chloride) phosphate (IP) functionalized MWNT (MIP). The morphology, thermal stability and burning behavior of the composites were investigated by Field Emission Scanning Electron Microscopy (FESEM), Thermogravimetric Analysis (TGA) and Cone Calorimeter Test (CCT), respectively. Significant improvement in fire retardant performance was observed for the PLA/MIP composite from CCT (reducing both the heat release rate and the total heat release) and TGA (increasing the char residue) compared to PLA/MWNT. SEM and Raman spectroscopy were utilized to explore the surface morphology and chemical structure of the char residues. It revealed that the catalytic charring effect of IP, the physical crosslinking effect of MWNT, and the combined effect of both IP and MWNT (forming continuous and compact char layers) were very efficient in improving the flame retarding properties of PLA/MIP composite. 相似文献
7.
Aligned carbon nanotubes (CNTs) are implemented into alumina-fiber reinforced laminates, and enhanced mass-specific thermal and electrical conductivities are observed. Electrical conductivity enhancement is useful for electrostatic discharge and sensing applications, and is used here for both electromagnetic interference (EMI) shielding and deicing. CNTs were grown directly on individual fibers in woven cloth plies, and maintained their alignment during the polymer (epoxy) infiltration used to create laminates. Using multiple complementary methods, non-isotropic electrical and thermal conductivities of these hybrid composites were thoroughly characterized as a function of CNT volume/mass fraction. DC and AC electrical conductivity measurements demonstrate high electrical conductivity of >100 S/m (at 3% volume fraction, ∼1.5% weight fraction, of CNTs) that can be used for multifunctional applications such as de-icing and electromagnetic shielding. The thermal conductivity enhancement (∼1 W/m K) suggests that carbon-fiber based laminates can significantly benefit from aligned CNTs. Application of such new nano-engineered, multi-scale, multi-functional CNT composites can be extended to system health monitoring with electrical or thermal resistance change induced by damage, fire-resistant structures among other multifunctional attributes. 相似文献
8.
This paper reports on the development of electrically conductive nanocomposites containing multi-walled carbon nanotubes in an unsaturated polyester matrix. The resistivity of the liquid suspension during processing is used to evaluate the quality of the filler dispersion, which is also studied using optical microscopy. The electrical properties of the cured composites are analysed by AC impedance spectroscopy and DC conductivity measurements. The conductivity of the cured nanocomposite follows a statistical percolation model, with percolation threshold at 0.026 wt.% loading of nanotubes. The results obtained show that unsaturated polyesters are a matrix suitable for the preparation of electrically conductive thermosetting nanocomposites at low nanotube concentrations. The effect of carbon nanotubes reaggregation on the electrical properties of the spatial structure generated is discussed. 相似文献
9.
A simple synthetic method for placing a mesoporous silica coating on multi-wall carbon nanotubes (CNTs@MS) was developed to improve the surface compatibility with regard to a polar epoxy matrix. In addition, the mesoporous silica shell with silanol groups on the CNTs provides a platform to attach silane molecules (e.g. 3-glycidoxypropyltrimethoxysilane, GPTMS) that enable the CNTs@MS to be incorporated into the epoxy matrix at a content of up to 20 wt.%. The viscosities of the CNTs@MS- and GPTMS-modified-CNTs@MS–epoxy composites are much lower than that of the CNTs–epoxy, and then the voids in the GPTMS-modified-CNTs@MS–epoxy composites are most significantly reduced. The effects of the CNTs@MS and GPTMS-modified CNTs@MS on the mechanical and thermal properties of the epoxy composite are investigated. The results show that the GPTMS-modified CNTs@MS improved the filler–epoxy matrix interaction, and has better compatibility in epoxy than the CNTs@MS. As the surface compatibility and interaction strength increase in the epoxy matrix, the enhancement in storage modulus, thermal conductivity and reduction in the coefficient of thermal expansion are in the following order: GPTMS-modified CNTs@MS > CNTs@MS ≫ CNTs. 相似文献
10.
Effect of short carbon fibers and MWCNTs on microwave absorbing properties of polyester composites containing nickel-coated carbon fibers 总被引:1,自引:0,他引:1
Igor Maria De Rosa Adrian Dinescu Fabrizio Sarasini Maria Sabrina Sarto Alessio Tamburrano 《Composites Science and Technology》2010
Multiphase composite materials filled with multiwall carbon nanotubes (MWCNTs), short nickel-coated carbon fibers and millimeter-long carbon fibers with various weight fractions and compositions are developed and used for the design of wide-band thin radar-absorbing screens. The effective complex permittivity of several composite samples is measured in the frequency range from 8 GHz to 18 GHz. The obtained results show that the addition of the MWCNTs into the mixture allows tuning the EM properties of the composite filled with the short nickel-coated fibers. Numerical simulations are also performed in order to design new radar-absorbing shields. Single-layer and bi-layer thin dielectric Salisbury screens are designed to exhibit minimum reflection coefficient at 10 GHz and at 15 GHz, and maximum bandwidth at −10 dB. It results that the total thickness of the screen can be reduced below 2 mm by using a lossy sheet made with the composite filled with MWCNTs and nickel-coated carbon fibers, whereas the bandwidth at −10 dB can exceed 6 GHz in a bi-layer structure. 相似文献
11.
With a continuous improvement of the production techniques for carbon nanofibers and carbon nanotubes along with an improvement of the available qualities of the materials, these reinforcements have been introduced into polymers, ceramics and metals. While in the field of polymers first success stories have been published on carbon nanofiller reinforcements, up to now metals containing these types of nanofillers are still a topic of intensive research. Basically a similar situation were found in those days, when micron sized carbon fibers came on the market. Today many applications of carbon fiber reinforced composites are existing, while metals reinforced with conventional carbon fibers are still only found in niche applications. 相似文献
12.
The formation of magnetite nanoparticles on the sidewalls of multi-walled carbon nanotubes 总被引:1,自引:0,他引:1
Linear polyethyleneimine (PEI) was used as a non-covalent functionalizing agent to modify multi-walled carbon nanotubes (MWCNTs). Fe3O4 nanoparticles were then formed along the sidewalls of the as-modified MWCNTs through a simple solvothermal method. X-ray diffraction, Fourier transform infrared spectrometry, transmission electron microscopy, and vibrating sample magnetometry were used to characterize the MWCNT/Fe3O4 nanocomposites. Results indicated that Fe3O4 nanoparticles with diameters ranging from 50 to 200 nm were attached to the surface of the MWCNTs by electrostatic interaction. PEI was found to improve the electrical conductivity of the MWCNT/Fe3O4 nanocomposites. The magnetic saturation value of these magnetic nanocomposites was 61.8 emu g−1. These magnetic MWCNT/Fe3O4 nanocomposites are expected to have wide applications in bionanoscience and technology. 相似文献
13.
Multi-phase composites have been studied by incorporating carbon nanotubes (CNTs) as a secondary reinforcement in an epoxy matrix which was then reinforced with glass fiber mat. Different types of CNTs e.g. amino functionalized carbon nanotubes (ACNT) and pristine carbon nanotubes (PCNT) were homogeneously dispersed in the epoxy matrix and two-ply laminates were fabricated using vacuum-assisted resin infusion molding technique. The issues related to CNT dispersion and interfacial bonding and its affect on the mechanical properties have been studied. An important finding of this study is that PCNT scores over ACNT in composites prepared under certain conditions. This is a very significant finding since PCNT is available at a much lower cost than ACNT. 相似文献
14.
This study aims to investigate experimentally the effects of aspect ratio (length/diameter ratio) and concentration of multiwalled carbon nanotubes (MWCNTs) on thermal properties of high density polyethylene (HDPE) based composites. The aspect ratios of two types of MWCNT fillers are in the range of 200–400 and 500–3000. Composite samples were prepared by melt mixing up to weight fraction of 19% filler content, followed by a compression molding. Measurements of density, specific heat and thermal diffusivity (by modulated photothermal radiometry, PTR) were performed and effective thermal conductivities ke of nanocomposites were calculated using these values. The results show that the composites containing MWCNTs with higher aspect ratio have higher thermal conductivities than the ones with lower aspect ratio. In terms of conductivity enhancement ke/km − 1, the results indicate that MWCNTs with higher aspect ratio provide three to fourfold larger enhancement than the ones with lower aspect ratio, at low filler concentrations. 相似文献
15.
Petra Pötschke Kazufumi Kobashi Tobias VillmowTimo Andres Maria Conceição PaivaJosé António Covas 《Composites Science and Technology》2011,71(12):1451-1460
The sensing properties of polypropylene (PP)/poly(ε-caprolactone) (PCL) blends containing multiwalled carbon nanotubes (MWNT) were studied in terms of their electrical resistance change in presence of liquids (solvents). The preparation of co-continuous blends based on the double percolation concept was done by melt mixing of electrically conductive PCL composites containing 3 wt.% MWNT and neat PP in ratios of 30:70, 40:60, and 50:50. The electrical resistance change of the PCL-MWNT composites and blends was monitored in a solvent immersion/drying cycle. Various solvents, such as n-hexane, ethanol, methanol, water, toluene, chloroform, and tetrahydrofuran were successfully detected, yielding different responses and reversibility of the resistance changes.PP and PCL were tested separately for solvent sorption using ethanol and n-hexane, both showing a low sorption of n-hexane. Ethanol sorption was large for PCL and almost absent for PP. The 50/50 blend composites with 3 wt.% MWNT in the PCL phase presented larger resistance changes for n-hexane, showing larger sensing ability for this solvent compared to PCL composites with 1 and 3 wt.% loadings. The opposite response was observed for immersion in ethanol where the PCL-MWNT composites showed larger changes than the blends. As the ratio of the conductive PCL phase over PP in the blend composition (i.e. the overall MWNT content) decreased, larger resistance changes were observed. The liquid sensing properties of compression-moulded discs and melt-drawn filaments were compared indicating higher responses for the discs. 相似文献
16.
Vinyl ester resins are often utilized in advanced naval composite structures due to the relatively low viscosity of the resin and the capability to cure at ambient temperatures. These qualities facilitate the production of large naval composite structures using resin infusion techniques. Vinyl ester monomer was synthesized from the epoxy resin to overcome processing challenges associated with volatility of the styrene monomer in vinyl ester resin. In this research we have investigated the use of a calendering approach for dispersion of multi-walled carbon nanotubes in vinyl ester monomer, and the subsequent processing of nanotube/vinyl ester composites. The high aspect ratios of the carbon nanotubes were preserved during processing and enabled the formation of a conductive percolating network at low nanotube concentrations. An electrical percolation threshold below 0.1 wt.% carbon nanotubes in vinyl ester was observed. Formation of percolating carbon nanotube networks at low concentration holds promise for the utilization of carbon nanotubes as in situ sensors for detecting deformation and damage in advanced naval composites. 相似文献
17.
Robert SocherBeate Krause Sylvia HermaschRoland Wursche Petra Pötschke 《Composites Science and Technology》2011,71(8):1053-1059
Hybrid filler systems of multiwalled carbon nanotubes (MWCNTs) and carbon black (CB) were incorporated into two types of polyamide 12 (PA12) using small-scale melt mixing in order to identify potential synergistic effects on the interaction of these two electrical conductive fillers. Although no synergistic effects were observed regarding the electrical percolation threshold, at loadings well above the percolation threshold higher volume conductivities were obtained for samples containing both, MWCNT and CB, as compared to single fillers. This effect was more pronounced when using a higher viscous PA12 matrix. The formation of a co-supporting network can be assumed. The combined use of CB and MWCNTs improved the macrodispersion of MWCNT agglomerates, which can be assigned as a synergistic effect. DSC measurements indicated an effect of the nanofiller on crystallisation temperatures of PA12; however this was independent of the kind or amount of the carbon nanofiller. 相似文献
18.
Haibao Lu Yanju LiuJihua Gou Jinsong Leng Shanyi Du 《Composites Science and Technology》2011,71(11):1427-1434
We are presenting a method of synthesizing three-dimensional self-assembled multi-walled carbon nanotube (MWCNT) nanopaper on hydrophilic polycarbonate membrane. The process is based on the very well-defined dispersion of nanotube and controlled pressure vacuum deposition procedure. The morphology and structure of the nanopaper are characterized with scanning electronic microscopy (SEM) over a wide range of scale sizes. A continuous and compact network observed from the microscopic images indicates that the MWCNT nanopaper could have highly conductive property. As a consequence, the sensing properties of conductive MWCNT nanopaper are characterized by functions of temperature and water content. Meanwhile, in combination with shape-memory polymer (SMP), the conductive MWCNT nanopaper facilitates the actuation in SMP nanocomposite induced by electrically resistive heating. Furthermore, the actuating capability of SMP nanocomposite is utilized to drive up a 5-gram mass from 0 to 30 mm in height. 相似文献
19.
Carbon nanotube (CNT)/cellulose composite materials were fabricated in a paper making process optimized for a CNT network to form on the cellulose fibers. The measured electric conductivity was from 0.05 to 671 S/m for 0.5–16.7 wt.% CNT content, higher than that for other polymer composites. The real permittivities were the highest in the microwave region. The unique CNT network structure is thought to be the reason for these high conductivity and permittivity values. Compared to other carbon materials, our carbon CNT/cellulose composite material had improved parameters without decreased mechanical strength. The near-field electromagnetic shielding effectiveness (EMI SE) measured by a microstrip line method depended on the sheet conductivity and qualitatively matched the results of electromagnetic field simulations using a finite-difference time-domain simulator. A high near-field EMI SE of 50-dB was achieved in the 5–10 GHz frequency region with 4.8 wt.% composite paper. The far-field EMI SE was measured by a free space method. Fairly good agreement was obtained between the measured and calculated results. Approximately 10 wt.% CNT is required to achieve composite paper with 20-dB far-field EMI SE. 相似文献
20.
Carbon nanotubes (CNTs) grafted on fibres are widely used to reinforce composites in order to improve their mechanical properties. This study concerned the tribological properties of CNTs grafted on carbon fibres by the flame method. The aim of this study was to determine whether CNTs on fibres suffer damage under stress, similar to those applied during composite manufacturing, which can damage composite properties, particularly fibre/matrix adhesion. For this purpose, reciprocating friction tests were performed to examine the resistance of CNTs and highlight a wear mechanism. The results showed that the presence of CNTs increased the coefficient of friction in the first friction cycles and then decreased it to close to the COF of the fibre without CNTs. The wear mechanism showed that after a small number of friction cycles, the CNTs were flattened out and formed a transfer film. 相似文献